Design jet 500: 500 Print Design

Similar Questions

• Toner Collection Unit - Laser Jet 500

  Hello

  I have a printer HP Laser Jet 500 and it asks me to replace the toner collection unit.

  What type of toner collection unit is compatible with my printer?

  @iconsiglieri

  Toner collection unit is a replaceable piece by customer. Here is a document that shows how to replace the unit but also gives you a picture of what it looks like. Do a google search > m551 and you toner collection unit will be able to find the right part. Refer to the below document replace the unit.

  Replace Toner Collection Unit

• Is there a cable that goes from my hp psc 500 printer to a usb port on my computer.

  Is there a cable that goes from my hp psc 500 printer to a usb port on my computer.

  Hi there dcjoe,

  Many places carry the cables you are looking for. If your region may vary, I found them in places like radioshack and wal-mart. To start, here's a commercial for google link . Let us know if that helps.

  Good luck!

• Designjet 500 prints on usb but not ethernet

  I inherited a DesignJet 500 printer 24 in. I can print so that I am related to him by a USB cable but when I try to set up on my network, I can't print to it across the network.  I can ping the JetDirect card and can telnet in as well so I know that I have the correct IP address and it the card itself can communicate with my network.  I use the same driver via the USB port and the network port but still unable to print over the network.  Any ideas why I can connect to the printer on my network, but I can't print on it unless I connected locally with a USB cable?  I tried with a laptop running XP32bit and Win7 64 bit with the same results.

  Thanks for the help.

  Thanks to the entrance to the Forum of commercial products.  BTW, I discover to my problem.  It looks like the problem was the cable used to connect to my network.  One of the things that I should have checked first, but don't have.  After replacing the cable, I was able to print from the network to it.

• HP DeskJet 500 printer

  Hello. I use a HP DeskJet 500 printer, which is about 14 or 15 years old. My problem is that when I insert a new cartridge, it works very well for a few days and then stops just print. My remedy is so far to remove the cartridge, pull it out and shake it vigorously and then reinstall it. It works for a few minutes to several days. This has happened with the last 3 cartridges, I have installed.

  I don't know if my printer is just tired or if I got hold of a defective batch of cartridges?

  Any thoughts would be appreciated.

  Wow - this printer sounds like it must be an old friend! Is failure, an error message, or printing is faded or ridged?

  Are you sure that you are using genuine HP cartridges? The HP cartridges are guaranteed to work up to the date that is printed on the cartridge. Here's a doc on the warranty of HP ink, which shows you where the dates on the cartridge: http://support.hp.com/us-en/document/c00206040

  If you use genuine HP cartridges and see repeated failures, you should be able to get a replacement under warranty. You shouldn't have gotten 3 defective cartridges in a row.

  The only other thing I can think is that some older printers cartridge problems can be caused by an accumulation of sludge of ink on the service station. I can find no documentation for the Deskjet 500 on hp.com, so I can't tell you even which side of the printer is the gas station, but if you turn off the printer, open it so that you can physically see the cart with the cartridges and then pull the transport until the middle of the printer, the service station must be just below where the transport was. If you see a build up of sludge to ink it, you could try, very carefully, to clean. Be aware that the mud is dried ink and will be very messy - be sure that you don't get on your skin, clothes, carpets, etc..

  Good luck!

• Laser jet 1018 HP printer does not

  Original title: Laser jet 1018 HP printer does not

  I have a Laser jet HP 1018 and lost the disc printer if I can get any computer to be able to communicate with him. I downloaded the software that I thought I was able to run the printer, but nothing works. What else can I do to get the two to talk so I can print?

  Hello

  ·         You get the error message?

  ·         Did you install the printer without any problem drivers?

  ·         Were there recent changes made on the computer before the show?

  Step 1:

  Follow the form of measures troubleshooting article and check if that helps.

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Step 2:

  Try to remove old drivers and reinstall the most recent drivers from the HP website and check if it helps.

   

  Add or remove a printer

   

  Find and install printer drivers

  HP LaserJet 1018 printer support site about the installation, see also:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=1814094&LC=en&cc=us&DLC=en&lang=en&cc=us

• my hp 6500 has more all in an office jet is not printing with magenta and yellow why colors?

  my hp 6500 has more all in an office jet is not printing with magenta & yellow why colors?

  Well! Wish we knew what caused the problem, but I am very happy, it is corrected! Please post if there are other problems!

• HP LASER JET 1020 not print even one Page of Test.

  HP LASER JET 1020 not print even one Page of Test. Driver is correctly installed and the printer is detected. Operating system is Windows 7 (32 bit).

  can someone help to solve the problem?
  Thank you

  HP LASER JET 1020 not print even one Page of Test. Driver is correctly installed and the printer is detected. Operating system is Windows 7 (32 bit).

  can someone help to solve the problem?

  Thank you

  (1) U have tried to reinstall the printer drivers? Try to clean the print cartridge using the hp software installed...
  (2) if the problem persists, reinstall the cartiridges...
  (3) make surré cartiridges meet ink, the wires are properly pluged in electricity, as well as cable usb to computer, usb messages work
  (4) try to refresh service printer spoiler...
  Run this file bat using to run as administrator

  https://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat

  (5) use HP Print and Scan Doctor (find and fix common problems printer using HP for Windows diagnostic tools)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02073861

  If necessary
  Contact hp help and support
  http://WWW8.HP.com/us/en/support.html

  Contact hp support forum
  http://WWW8.HP.com/us/en/supportforums.html

• COMPATIBILITY OF MY OFFICE JET 4500 G510N PRINTER WITH IOS AIRPRINT SOFTWARE WIRELESS

  IS MY WIRELES OFFICE JET 4500 G510N PRINTER COMPATIBLE WITH IOS AIRPRINT SOFTWARE IN THE IPAD2

  Lol you can use with the application mobile ePrint for iOS devices. You can learn more by following the links below. I hope this helps.

  Supported printers the HP ePrint Mobile App or HP ePrint home & Biz:
  http://goo.GL/RsNpf

  HP ePrint Mobile Apps FAQ:
  http://goo.GL/33WFq

• I have microsoft scan software and a jet hp6500 office printer, scanner etc. How can I scan to a PDF file?

  I have microsoft scan software and a jet hp6500 office printer, scanner etc.  How can I scan to a PDF file?

  Hello Jim,

  I will suggest 2 things. First, go to hp.com site and select your device from the five listed here (http://www8.hp.com/us/en/support-drivers.html).

  Second suggestion is that you use the HP software to scan your document, where the native format is PDF.

  Let me know if this helps you.

  Kind regards

  BearPup

• Printer more HP Design jet 500

  It comes with error n ° 21:10

  Gas station replaced is always delivered with 21:10 error. checked the gas station and it works.

  What could be the problem.

  Thank you

  Mahrez

  Have you maybe just changed the belt. If you did most likely pinch you the big gray water that goes from the emod when you put the right holder back on. If so just remove the mount again and make sure that the cable is loose after putting the leg back on. Also, make sure that the coding is clean on the right side of the gas station. Clean gently with a damp cloth.

• Is it possible to change the default print on a HP LaserJet 500 printer M551 color tray

  Hello

  Is it possible to install the default print to the HP LaserJet 500 color printer tray M551 be impression tray 2 times online and live?

  If so, what would be the best way to go to implement?

  Thank you

  Hi thanks for taking the time to answer.

  In the end, I gave a call to HP support, and they explained to me that the default tray will always be Tray 1 if it is open, and if you add additional bins, one at the bottom will become the default tray.

• Laser Jet 500 color M551: 49.38.07 LJ 500 device error

  After a sever thunderstorm and lightening, I have a 49.38.07 error code of the unit on the screen. How to clear and / or solve the problem? Could not find info on the LJ 500 M551 color printer. Power supply? Access Control Panel?  Thank you.

  Well, if you get 49 error code without the machine connected to the network that you have a problem with the formatter Board.

• HP PSC 500 printer

  The HP PSC 500 will work with a cable cnnection to a USB connection on my computer. Is no connection to a printer at the back of the computer. The operating system is Windows XP series 3

  Please notify

  I'm sorry you have a problem with the printer. At the back of the computer, the printer would go into a USB port. There should be a USB port on the computer.

  If you need more help, here is a link you can follow that will help you.

  http://support.HP.com/us-en/document/buu01853

• HP Deskjet 500 printer setup for Windows 7

  Just bought a new computer with Windows 7 64 bit Home Premium edition (no parallel port), but can't get the old Deskjet 500 working despite reading all internet posts, of the solutions.   I hope someone has a story to share.

  I bought a USB / parallel, as many have suggested on the web.  The cable has been properly installed by Windows 7.  It appears under "Devices and printers" upward as IEEE-1284 of print USB media controller.  I then "Add a printer" and select USB001 (virtual printer to USB port), then select HP Deskjet 500.  Window 7 seemed to install the driver successfully seeing the icon of the printer with the 'green' checkbox

  However, when I try to print a document, the document in the queue of the printer as "print...". "but get nothing printing.  Then after a minute or two, the printer queue message becomes "error - printing" and the icon of the printer goes 'green' checkmark to the triangle "yellow!"

  Any help is appreciated.

  HP may have their own support stuff. Here's a tool that their site made for you: http://h20614.www2.hp.com/ediags/gmd/index.aspx?lc=en&cc=us. If this does not work, contact them based on your template: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-005&h_lang=en&h_cc=us&h_product=14588&h_client=test&lang=en&cc=us.

  BTW, different models may behave differently, as printer of Melcom might be more happy to oblige you.