DesignJet 1050c more: 1050c failure print head

Similar Questions

• DesignJet 1050c more: 1050c print head cleaning

  Hi all

  I recently bought a 1050c more printer in fairly decent condition. I used to use a Roland SP540v at the office but this 1050c was home so I'm somewhat familiar with printers large format.

  His print beautifully after I replaced the timing belt, new valves of printhead on the ramasseherbe Assembly and removed all the air from the system. The only thing I noticed when I got all the covers off the coast has been the print head cleaning.

  The cleaners C, M and received this pleated filter sitting at the window near the wipers but the black does not. Is this normal? I can see what appears to be a sponge sitting at the front of the vacuum cleaner that I don't see in color.

  Refurbishable are printhead cleaning products? I only ask because it will be a unit of the House and I would try save as much as I can where I can.

  Kind regards

  Select this option.

  I just went down and checked on my 1050C cleaners and Yes, they are the same.  Also the same on the cleaners of the 5000 series, IIRC.  Foam on all colors but black without foam.

  Can you tell me where you extracted the floodgates of print head?  Also, I have a problem with the air in the lines on my 1050c and seeks to replace the system of whole tube by a refurbished.  But if I can try to solve it by simply replacing print head valves, I could even quite a bit of money.

  Thank you!

• HP Designjet 1050c more inkjet printer

  I have problems to download the software for my hp designjet 1050c more. My new computer uses the 64-bit Windows 7 system

  Hi CommercialFinishes,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  The printer driver HP Designjet 1050c inkjet more is not compatible with windows 7. See the link below and check:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=12607&lang=en&cc=us&prodTypeId=18972&prodSeriesId=24023&TaskID=135

  However, you can try to install the drivers under Windows XP or Windows Vista compatibility mode and check if it makes a difference.

  To install the drivers in Windows XP or Windows Vista compatibility mode,

  a. right-click the installation file, and select Properties.

  b. click on the compatibility tab.

  c. in compatibility mode, check the run this program in compatibility mode for: option.

  d. Select Windows XP or Windows Vista in the available options.

  e. click apply and OK.

  See the link below for more information on compatibility mode:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

   

  Let us know if that helps.

• DesignJet 1050c more Electronics Module Test

  Hello, all.

  A few weeks ago, we replaced the belt on our more tracer 1050c DesignJet.  After restarting the printer, he would end the scan of the axis.  Did a bit of reading and greasing and decided to try again today.  Today, it is said that there is an error with the electronic module probably with the spray fan.  From what I gathered, the more does not use a fan of the aerosol.  Is this true?  Any of you have an idea as to what could happen?

  Thank you.

  We had a service technician come and fix it Wednesday.  The coding Strip has not been installed correctly.

• Allocation of IP address for HP Designjet 1050c more with windows 7 + IP address + dhcp.

  Original title: HP designjet 1050c more with windows 7 + IP address + dhcp

  HP designjet 1050c more with windows 7 + IP address + dhcp. need to assign the IP address to mint condition plan printer. ?

  Hello

  1 are you facing problems to assign the IP address?

  2. How is the printer connected?

  2. is the computer on a home network?

  If you try to assign an IP address manually, you can refer to the article and check if it helps.

  Change TCP/IP settings

  See also the article:

  Install a printer on a home network

  For more information, refer to the HP support article:

  Configure TCP/IP on the HP Designjet 1050c printer more

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• HP designjet 1050c is compatible with windows 7

  We have a HP Designjet 1050c model C6074B and recently bought a new computer with windows 7.   I am trying to determine if the computer is compatible.  Any ideas?

  Vista Designjet 1050c drivers have been reported to work under Windows 7, see the post here.  (I used XP x 64 drivers for my old old Designjet 650 c in Windows 7 and Windows 8).  You will need to select the correct 32-bit version or 64-bit driver.

  There are also has 1055c Designjet drivers available on Windows 7 in the add a printer dialog box, it may be worth trying one of these.

  This forum focuses on the level of consumer products.  In the future for the Designjet you can have better results, post in the forum HP Designjet here.

  

• Re: HP 6500 has more print head always needs replaced

  I own a HP 6500 e709n and have had problems with the cartridges of printers are not recognized and experiences one now where worked my 920 dual black cartridge and the printer being functional black print only with no error messages but not color print as one or more of the cartridges were probably low or dried up. I changed the cartridges out with genuine hp 920 s and now get a message indicating one or more cartridges missing or damaged-cyan. Put my old cartiges backwards and got the same failure where none were before with them. From cartridge games and open holes with PIN as described for if ensure that ventilation was allowed both sets and retried. Was always the same message on cyan then pulled the print head and cleaned by the procedure several times hp. Now get the ink system failure. Cleaned again now return to the failure of the cyan cartridge. Loop d zero. Seems that this printer know when I really need and fails at that time in a way that I can't fix.

  I worked in the manufacturing sector and in my case all returns have been watched and analized by Tech as a measure of the quality control or quality assurance. It makes sense for business profitability so much customer satisfaction. In my view, because there is a common problem that seems to be frequent, there is an exact question that was observed by the company (HP) and they know what the problem is. IM surprised that information has not been put forward here by people who represent so called HP. What is the main problem that change a print head - relieves most of the time? Dried up ink in the corridors. Hard Electronics failure of the members of the Ribbon or pc? Faulty detection mechanism? Mechanism of cartridge HP cartridge original problem to prove ID? Customers using non hp cartridge or refill the cartridge authentic? ... what causes?

  Thanks for the reply. As I said in my post 2cnd problem was completely healed of many print CRC head baths and a toothbrush. Is there a reason why it has been edited my first post on the thread? Apparently you still like you he referenced earlier. Thanks, Keith

• Ink tube leaking Designjet 1050c

  My Designjet 1050c is leaking yellow ink coming out of tube under the prinheads jets. I took the whole hose out of the printer (per instruction manual). My question is, these nozzles can be replaced at the end of the tubes verses buying a whole new tube Assembly? $300 + est a lot of money for a full game when you need only 1 nozzle or 4 new ones.

  Here, any help would be greatly appreciated.

  I think I'll be in good shape now... I figured out how to get the fixing of nozzle apart without destroying it,

  AND... NOZZLES, I FOUND ON EBAY FOR $18.00... !!!!!!

• DesignJet 5500: print head print test very good page, but I still get the error message to replace the printhead

  On my DesignJet 5500, I rswitched the ink tubes, printheads and printhead cleaners dyeing anti-UV, 81 to 83.

  I got an error message saying that the black print head needed to be replaced so I bought another head black printing and after that, I was able to print a test page that shows all the colors (image quality page?).

  Magenta not give not any code of error before, but now I get an error message saying that the printhead magenta must be replaced, even if magenta print well on the printed test page.

  Hello

  The printer give you a warning when the health of the print head is low, but it will continue to print.

  If the problem has been solved after all print head replacement can be that a print head cause others to fail

  Or, just a few bad print heads

• HP Officejet Pro 8500 has more: 8500 has more - will not print in color and alignment of printhead failure

  I have new ink cartridges, but it will only print in black.  Grayscale is not on.  I also cleaned the print heads several times and tried to line up, but this part came failure refers to the documentation.  What are the documents?  I would lov eto to be able to print in color again!  Any ideas?

  Hi @Adriana8,

  I see that you have problems printing in color. You have changed the cartridges and have the same results. I want to help you solve this problem.

  Please, try the following steps to see if it will help solve the problem. Ignore the titles of 2nd & 3rd documents.

  HP Officejet Pro 8500 printer - color or black ink prints do not.

  All-in-one HP Officejet Pro 8500 (A909) and Officejet Pro 8500 has e-All-in-One (A910) Printer Series - one "ink cartridge appears to be missing or corrupt" control panel displays error on the printer.

  'The following printhead appears to be missing or damaged' display for HP Officejet Pro 8500 has e-all-in-One Printer Series.

  You use genuine HP cartridges?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Good day! Thank you.

• Print head and Officejet 6500 ink system failure problems

  I have the Officejet 6500 wireless and it won't print.  It says ink system failure and head print seems to be missing or damaged.  Today, I installed new HP ink cartridges.

  Is it possible to check to see whether this printer is kaput?

  There is a document with steps to help treat herelocated ink system failure messages.

  So, for the question on the print head see the document here.

  I hope this helps.

• HP Officejet Pro 8600 more indicates 'missing or does not print head ". I followed HP 4 instruct. Help

  HP Officejet Pro 8600 more indicates 'missing or does not print head ". I did 4 HP instructions and now I'm #4: contact HP. I cleaned the heads, replaced the 4 cartridges, removed and replaced the unit restarted, everything. Now what?

  There is a document with measures to help address the missing or condition is not the print head.  This document can be found here.

  From your post, I understand that you did some the most of these steps, but run Solution 4: replace the print head.

  If you are still in warranty, HP can replace the printer/printhead without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

• Designjet Z5200: How to replace a print head on Designjet Z5200

  I have updated firmware and ran troubleshooting and received the message of

  replace the printhead for LM - LC.

  It's a part that I can order and replace myself or is it recommended to fix my printer?

  My warranty has expired.

  Thanks for your suggestions, help about this.

  Hello

  You don't need a technician to replace a print head.

  Here are the instructions to replace the printheads

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c00810189

  Best regards

  Mike G

• HP Designjet 500 42 '' model work, the print heads

  Recently I repair a DJ500 42 '' model for a friend, and even I replaced with new Magenta, Cyan & yellow heads printing, but invites always replace them. I tried 2 new popular series and always the same.

  I opened the box to transport and clean all the contacts on thin and all cables inserted perfectly & securely. Nothing works.

  The transport box looked like new and not dusty, and I really doubt that there problem. Ink system all very well with HP inks.

  I replaced it with a new gas station, belt and transport move freely.

  No idea what I can try?

  Thanks in advance for your help.

  Concerning

  David:

  Thank you for your valuable info and I just did what you suggested:

  After that I removed all the print heads and dj500 front display,
  Cyan, magenta, yellow flashing and black had full solid

  flashing.

  After that I inserted all the heads of print with cyan, magenta, yellow crossed

  flashing.

  That's all...

  Maybe I'll try different transport box...

• Photosmart more 209 a: I just want to thank Kosh to his instructions on cleaning the print head on a Photosmart Plus 209 has.

  I just want to thank Kosh (61 115 message) for instructions on cleaning the print head on a Photosmart 209!  I did it, it worked, I can print in black again!

  Thank you, Kosh!

  Hello

  Thank you for using the HP Forums.

  I'm glad to hear that your problem is solved and everything works fine now.

  Want to share your expriences on the cleaning of the print head?

  Thank you.

  Good day!