Designjet 1055 cm liked: designjet 1055 more power cord

Similar Questions

• OfficeJet 8600 more: power cord with adapter for Officejet 8600 set more lost

  Lost my power cord complete with adapter. Can I use a power cord generic Office Depot, without the 'square' on the wire? Or is it necessary to have the power cord with the adapter, as it was originally? It will damage my 8600 more to use a power cord without this "square" in the annex on my more than 8600 all-in-One? Thank you.

  Hello @DB2,

  I understand that you have lost the power cord for your HP Officejet Pro 8600 more e-all-in-one printer and you want to replace it. I would like to help you to solve this problem today. The HP Officejet 8600 more only comes with a power cord. The adapter is built into the back of your printer. You have to unscrew the back of your machine in order to access it. Therefore, if you buy a spare power cord it should work perfectly for you.

  The power requirements for this machine are:

  • Power: Universal power adapter (external)
  • Power consumption: Input voltage: 100 to 240 VAC (± 10%), 50/60 Hz (± 3 Hz)

  Output voltage: + 32V / + 12V to 1095 mA/170 my

  • Consumption: 30 watt impression (project Quick Mode); 32 watts copy (Fast draft Mode)

  -Source

  You can buy a power cable of the store to use with your printer, or you can contact our Technical Support queue and buy the correct power cord for your printer by phone.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if this information solves your problem. Thanks for joining the Forums from HP Support. I look forward to hear from you!

• T410s Ultrabay problem - hard drive requires more power

  I'm working on upgrading a T410s to give it as a gift to my girlfriend. I've already upgraded the ram and had to replace the screen and both went very well.

  Now, I'm working on adding a second hard drive with the ultrabay. I'll keep the original SSD as my boot drive and you want to use the ultrabay for a normal HARD drive to increase the total space for her. It is a graphic design / photography major space would be nice.

  I bought a 3rd party caddy and a WD Black 750 g 7200 RPM drive through Amazon. I followed the advice that I heard somewhere that you need to make a shortcut of the old EVD to access the new hard disk drive. When I installed the ultrabay and booted up, the computer could not access E:. Nothing happened.

  I heard somewhere else ultrabay housing could use only 5 units of power (I don't know if it was watts or volts) and therefore the WD black drive series, I got is likely to need more power to operate (9-12 units). This noise to anyone who has installed a ultrabay correct? Maybe at the time where the T410s first came out, most hard drives use more than 5 units?

  Any recommendations? Thank you!

  I don't know what are the units of power, and I never heard of the the ultrabay on a T410s not giving a hard drive of all the power he needs. I must admit that I am very skeptical about the claim that you read.

  Perhaps the drive has not been initialized because it's new? If you are on Windows 7, click the Start button and type "create and format" in the search bar. You should see the drive it so that it can be initialized. Another way to get there is by going to control panel > administrative tools > computer management > disk management.

• HP designjet 500ps more: HP designjet UPS more Help

  I have a HP designjet 500ps more, right now when printing large posters he says he is short on memory and the loss of data.

  Will I have to buy additional memory.

  Try to make the print job on your pc. Or...

  HP Designjet 500 printer series - Type of memory being used for the upgrade

  QUESTION: My Designjet 500 printer along with 16 megabytes (MB). Can I add an additional memory? How many?

• HP Designjet 500 more: DRIVER FOR HP Designjet 500 FILE more

  Hello

  HOW to GET Designjet 500 more DRIVER FOR Windows 10 Enterprise 64 - bit OS

  Windows 10 is not released until July 29, pilots and what products will be supported probably won't be out until close.  The HP page here says "compatibility tool soon, come back in the end of July."

  That said, I use the old driver Windows XP x 64 on my decades old Designjet 650 c in Windows 10 preview.  I think Windows 7 or 8/8.1 drivers work in Windows 10 for the Designjet 500 if there is not drivers provided.  At this point there are sixteen variations of HP Designjet 500 models available through Windows Update, including variants of the 24 "and 42" models, standards, and only, HP and Microsoft provided drivers PS mono models and color and HPGL2 drivers.

  

• Allocation of IP address for HP Designjet 1050c more with windows 7 + IP address + dhcp.

  Original title: HP designjet 1050c more with windows 7 + IP address + dhcp

  HP designjet 1050c more with windows 7 + IP address + dhcp. need to assign the IP address to mint condition plan printer. ?

  Hello

  1 are you facing problems to assign the IP address?

  2. How is the printer connected?

  2. is the computer on a home network?

  If you try to assign an IP address manually, you can refer to the article and check if it helps.

  Change TCP/IP settings

  See also the article:

  Install a printer on a home network

  For more information, refer to the HP support article:

  Configure TCP/IP on the HP Designjet 1050c printer more

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• HP Designjet 1050c more inkjet printer

  I have problems to download the software for my hp designjet 1050c more. My new computer uses the 64-bit Windows 7 system

  Hi CommercialFinishes,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  The printer driver HP Designjet 1050c inkjet more is not compatible with windows 7. See the link below and check:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=12607&lang=en&cc=us&prodTypeId=18972&prodSeriesId=24023&TaskID=135

  However, you can try to install the drivers under Windows XP or Windows Vista compatibility mode and check if it makes a difference.

  To install the drivers in Windows XP or Windows Vista compatibility mode,

  a. right-click the installation file, and select Properties.

  b. click on the compatibility tab.

  c. in compatibility mode, check the run this program in compatibility mode for: option.

  d. Select Windows XP or Windows Vista in the available options.

  e. click apply and OK.

  See the link below for more information on compatibility mode:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

   

  Let us know if that helps.

• Satellite L505 - new battery with more power

  Hi all

  is there another battery of the L505 with more power and a longer duration?

  Best regards
  Marcel

  Hello

  Have you ever seen the Toshiba site for compatible batteries? You can check it on the accessories homepage:
  http://EU.computers.Toshiba-Europe.com > devices & Services > PC Options & accessories

  You can get a new battery to an authorized service provider. Just call and ask them for this. ;)

• Qosmio F20 - 136 with more power as it gets

  Hi recently my Qosmio F20 - 136 uses more power that it... as if it is plugged into the wall with no battery it starts and run out of power and also cut when the battery is in and it is connected to the battery slowly undertakes and stop eventually. Can I do to solve this problem?

  Thanks Euan

  Hello

  I guess something is wrong with the electronics of power supply. Battery peut t be loaded correctly. Well, in my opinion the only way to solve this problem is to contact Toshiba service.

• H8 1414 HP envy. Need more power supply to run a better graphics card

  H8 1414 HP envy. Need more power supply to run a better graphics card. I don't have that power 300 watt need more someone knows a number of room and the place to get one that fits? I know that windows 8 makes it difficult, I am ready to install windows seven anyway.

  Nick, welcome to the forum.

  You can use any standard ATX power supply unit (PSU).  I always recommend measuring the PSU existing and comparing measures to whichever you choose, however.  I love Corsair products.  Also, I recommend at least 500W; 600W is even better for future updates.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• OfficeJet pro 8600 more power turn on witness rest "standby mode". is that correct?

  OfficeJet pro 8600 more power turn on witness rest "standby mode". is that correct?

  The power led will Flash slowly power on and off when the Officejet Pro 8600 Plus is in a sleep state.

• I have CC illustrator but I need a better computer with more power.

  I have CC illustrator but I need a better computer with more power. When I get my new computer I'll be able to download HAVE on it? Can someone please tell me the correct way to do it. Thank you very much has soon

  Hi Catherine,

  When you get the new machine, yes you can install Illustrator on it.

  Please see Licensing FAQ: can I reinstall cloud Creative if I get a new computer, my computer dies, or I have to reformat my drive?

  Download/Installation FAQ: How to download and install creative cloud applications?

  It could be useful!

  Rayyan

• Chromebook 14: 14 Chromebook accepts more power

  Hello

  I bought a Factory reconditioned Chromebook 14 several months (24/03/2016).  Today, I plugged the chromebook for a bit of extra power (battery to 64% at the time). I noticed that the charge indicator on the battery icon in the lower right corner of the screen comes on.  Then I unplugged the power cord and plugged in. The indicator light on the side of the chromebook (next to the electric cannon) is a turn on.  After moving the cable of load at 3 different points of sale in the House (which have been confirmed working by other devices with the help of power), I determined that the problem is indeed with the Chromebook (or the power cable).  At this point, the battery is still around 60% and I chromebook turned off where the diagnostic data are needed.

  Other forums, I looked through so far have asked for the release of crosh on a battery test, I ran. The output is below:

  Welcome to crosh, the developers of Google Chrome OS shell.
  
  If you got here by mistake, don't panic!  Just close this tab and operate.
  
  Enter 'help' for a list of commands.
  
  crosh > battery_test
  No test of specified length. Default value of 300 seconds.
  Battery (64,98% left)
  The battery: 94,36%
  Please wait...
  Battery of 0.69% in 300 second (s).
  crosh >

  Please help.  I don't know if it's the charging cable, or the chromebook himself.  The battery seems fine. It just seems to be a problem with the entrance of power between the wall and the machine itself.

  Here's the whole problem, end-to-end.  I spoke to a Google Chromebook support Member who accompanied me through a hard reset-both with the power cable connected and without. This term did nothing. They me transferred to HP support. He checked that I didn't have another device to test the power cable, or another power cable to test the powered chromebook.

  While on the phone, we talked about how this was a buy refurbished with a 90 day warranty, and given that it was day 91 (Yes, the problem started the day after the expiry of the 90 day warranty), I had 2 options - pay $43 plus taxes and delivery for a new power cable , or pay $229 to send in the chromebook for maintenance.

  At that point, I decided I think about my options and call later with a decision.  In the meantime, I went and read amazon.com for power cable options and came across this:

  https://www.Amazon.com/replacement-adapter-Chromebook-laptop-computer/DP/B00IZQSP8K/ref=sr_1_2?ie=UTF8&QID=1467039372&SR=8-2&keywords=Chromebook+14+power+cord

  It came in the mail yesterday, and I was able to verify that it works with my chromebook (model 14-q039wm) and load the chromebook very well indeed.  My problem has been resolved with a new feeder from amazon for $15.99 + shipping costs.

  Thanks for helping make me the representative of Google!

• OfficeJet 8720: Officejet HP 8720 (D9L19A): power cord issue & legality in the United Kingdom

  Hello

  As a society, we standardize more than 150 sites on the new printer HP Officejet Pro 8720.

  We ordered about 8 at our dealer online recently (Softcat) and each arrived with a European power cord 2 pin and not a power cord 3 pins of the UK.

  This causes significant confusion for our end users, and I think that it is illegal to even provide goods in the EU without the correct national power cord.

  Our retailer say that HP have armed upward and shipped loads of these 8720's without the correct power cords. It seems that a mass surveillance on HP is illegal and a part too? How can this happen?

  Surely all stock the 8720's should be limited to the British market and fixed with the right power cord?

  I have not reported this Exchange Standard yet, but I want to just get an idea of what's going on?

  Thank you

  H

  @HKCHG

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  
  Thank you for visiting the Forum from HP Support.

• My iPad displays a symbol of power cord and iTunes

  I tried all things hold sleep button to connect to the computer, then hold power button waiting and then start your computer repair but the iPad won't do anything except show the same screen, then after a few hours, the iPad is going to a dead battery. I tried to put the power cord but just ping guard. HELP Please,

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/