Designjet 1055CM Plus - a single line by full pass

Similar Questions

• Problem with creating a container with the single line of text

  Hi ~
  I'm overwhelmed with a following problem.
  Problem: I need to create a container with a single line of text. As I learn from the TLF API, there is no way to do that so he left only in a way that looks like this:
  
  Assuming that textFlow object is to create
  var container: Sprite = new Sprite();
  var width: Number = 500; It has specified the value
  var height: Number = 300; just estimate is sufficient for a normal line height
  var controller: DisplayObjectContainerController = new DisplayObjectContainerController (container, width, height);
  controller.verticalScrollPolicy = ScrollPolicy.OFF;
  
  textFlow.flowComposer.addController (controller); textFlow.flowComposer.composeContainer (textFlow.flowComposer.getControllerIndex (controlled r));
  
  find the first line of the top in the created container
  var textFlowLine:TextFlowLine = textFlow.flowComposer.findLineAtPosition (controller.absoluteStart, false);
  var calLineHeight:Number = textFlowLine.textHeight + 8; 8 this is just a test value
  controller.setCompositionSize (width, calLineHeight);
  textFlow.flowComposer.updateContainer (_textFlow.flowComposer.getControllerIndex (Controller));
  
  
  In this way, she first calculate first line height giving enough space for the controller
  and cope, after that there adjust the height of the container again and then updates.
  It's so fresh generals I guess
  
  If anyone has more simple or just how?
  

  In regards to a single line. I think you can set the lineBreak on the TextFlow to "explicit". In this case lines only break to return to the line and the point ends.

  If you want to be changed, take a look at the TextLineFactory APIs. NaN set in the width/height of the limit and it gets filled. It is a more lightweight way to create TextLines.

  Take a look at the properties DisplayObjectContainerControllers compositionWidth and compositionHeight full TextFlows as in your code using. You still want to use explicit line breaks.

  Hope that helps!
  Richard

• How to set up single-line message headers?

  Previously, in the message display area, I had configured Thunderbird so that a message appears that the subject of the message in the message header section just above the body of the message. But I just upgraded to to 38.1.0 and now I have in reserve, [address], in the header box, although I've seen-> headers-> Normal (Compact) set.

  Please tell us how to get back to the option just to display the subject line. Real estate vertical display is much too precious to not having the capacity of the old view of a single line.

  Thank you
  [email protected]

  Install this add on.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/compactheader/?src=HP-DL-featured

  The normal headers view removes the routing information only. It has nothing to do with what you are trying to accomplish.

• When you type an e-mail, when I go to the next line, it jumps two lines instead of a single line. How can I fix it?

  I was typing an email and when I would go to the next line, it will skip two lines instead of a single line. How can I fix the problem?

  I'm not sure that you understand the problem. Could include a screenshot of it just after what happens?

  If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• How can I add a spell checker this spelling laurys for a single line?

  I want a spell checker that checks my spelling for just a single line. For example, Ebay feedback is only one line long then how I spell check my typed in response? Thank you.

  You can do this by changing a hidden preference

  1. Type of topic: config in the address bar and press on enter, accept the message of warning that is displayed and you will be taken to a list of preferences
  2. In the upper search box, type out, will you limit the results to a small number of preferences
  3. Double-click the layout.spellcheckDefault preference and change its value to 2, which will allow the spell on simple lines

  See http://kb.mozillazine.org/Layout.spellcheckDefault for more details about this preference

• How can I get the tabs to go on a single line and a menu of Firefox?

  Firefox allows to have 2 lines above - Firefox menu with tabs and more and another line of the navigation toolbar. during the installation of some programs online, Firefox now have 3 lines at the top, with the Firefox menu on an entire line, the 2nd line of tabs and 3rd line of navigation toolbar. How can I get the tabs to go on a single line and a menu of Firefox?

  With the current versions of Firefox, you can choose to use the menu of Firefox (orange in windows; gray Linux) button at the left end of the Windows title bar or bar menus familiar as in earlier versions. The Firefox button is displayed by default only in Windows Vista and Windows 7, but you can turn on or off or switch between the two or temporarily show the menu bar when the Firefox button is displayed.

  • See how, click here-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox#w_why-are-the-menus-file-edit-view-etc-missing
  • Other changes after the upgrade-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox

  If you chose to use the Firefox button and you use the default tabs on top, the tab bar will move to the title bar with the Firefox button only when you are to maximize window (the ' square' the middle button in the upper right corner of the Windows standard application window). Other selected toolbars will be displayed below that (bar Navigation, Bookmarks Toolbar and the toolbars you add via Add - ons).

  • For toolbar, see Selections-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• I fill out an application online for the school. Is it possible to configure Firefox to check the spelling in a single-line text box without having to right click each time?

  I want to be able to set the spell checker to occur automatically, even for single-line text boxes.

  You can set the pref layout.spellcheckDefault to 2 on the topic: config page to perform spell checking on line and unique multi line text fields.

  • http://KB.mozillazine.org/layout.spellcheckDefault

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• Designjet 110Plus NR: HP Designjet 110 Plus NR Maintenance Utility does not detect printer

  Hello

  I have a Designjet 110 Plus NR printer that prints, but when you use the maintenance utility, it does not detect printer. I downloaded the latest version H.06.0 and am able to install it. but when the search for the printer it will not find it, and I have no way to pinpoint it too my printer. I have the printer connected to my computer via the USB port on a docking station HP residing in my laptop (Elitebook 800 G1 win 7 pro x 64). Also, it is connected via a parallel to the NIC dongle to make it available on the network for everyone to print too so. All can print, I can print but the Cyan is not always print and before you buy new print heads, I would like to clean and align with the Maintenance Utility. I tried to use the printer in the dock station, plugging directly into the laptop and the network to connect, but won't find printer. I tried the alignment of the front that I found in other forums, and it did not work. Whenever I went to the printer, I uninstalled all drivers and and the computer and rebooted system maintenance utilities. I installed the drivers from the HP website, from the disc initially supplied with the printer and our network, still no change print server. Am still able to print but not to run diagnostics or alignments. I've scoured the forums HP and all the "recommended" patches have never someone who in fact confirms the
  'Fix' worked. Can someone help with this problem? It has been about 4 days that I'm looking into this and frankly it's kinda ridicolous saw that it's a plug-and-play printer. Thanks in advance for any advice you may have!

  Well, the network adapter has failed. I managed to install the software, but he gave a generic IP address of the printer and gave me the same mistake of not being able to communicate with the printer. So, I pulled up an old laptop XP downloaded the drivers from the HP site, rebooted, printed the test page with success and installed the system maintenance utility. And WHOLA, I saw the printer immediately in the USB of Maintenance section and was able to run the diagnostic page and determine our problem. Thanks again for your help Mike!

• I would like to organize my toolbars to fit on a single line

  I have so many toolbars, some are really short and I wish I could move them if the courts fit on a single line.

  You are welcome.

  Please click the button of resolved next to the answer that solved your problem of Firefox support, when you are connected.

• How can I "automate" a question of a single line and response? the answer starts with the right margin and ending on the right margin as it is typed. The sequence would be: 1 type question 2. Tab at the right margin. 3 type the answer ending on the margin

  5.6.1 MacBook early 2015 OS X 10.11.3 pages

  Question: How can I easily format a series of "a line of questions / answers" (questions and answers on the same line.)

  How to easily create a long series of a single line of questions and answers to the question aligning it on the left and the end of the response by aligning right?

  For example

  !. Type the short question on the left margin.

  2. tab at the right margin.

  3. type the answer with the end of the answer on the right margin.

  Insert a right tab at the right margin.

  Peter

• Arrow keys serve page upwards or downwards instead of the single line upward or down, can't change it back.

  Keyboard up and down arrows use page up/page down instead of the single line up/down keys. I can't find how to change their return.

  This has happened

  Each time Firefox opened

  is my last installed update

  Maybe you turned Caret browsing. Press F7 and see if this is fixed.
  http://KB.mozillazine.org/accessibility.browsewithcaret

• Graphics problems with a single line at the top.

  During bootup until I perfect video resolution, but after starting windows I have a single line of the video of the ideas would be useful. I already checked the wiring, video card and the BIOS settings. Anyone had this problem? This had beat me my head against the wall for a week now.

  I'm just guessing that you have a problem with
  your video driver. Maybe the info will be
  be useful...

  Good luck...

  What happens if you start in Mode safe?

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  If you start correctly in safe mode... it can
  be worth a try to roll back your video driver.

  (306546) HOW to: use the driver to restore roll back feature
  a previous Version of a device in Windows XP driver
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;306546

• Reading single line of the text file

  I use the following code to read a .txt file

  private String readTextFile (String fName) {}
  String result = null;
  FileConnection fconn = null;
  DataInputStream is = null;
  try {}
  fconn = (FileConnection) Connector.open (fName, Connector.READ);
  is = fconn.openDataInputStream ();
  Byte [] = IOUtilities.streamToBytes (is) data;
  result = new String (data);
  } catch (IOException e) {}
  System.out.println (e.getMessage ());
  } {Finally
  try {}
  If (null! = is)

  is. Close();
  If (null! = fconn)
  fconn. Close();
  } catch (IOException e) {}
  System.out.println (e.getMessage ());
  }
  }
  return the result;
  }

  I want to print a single line instead of the file around so I read that I need to store the contents of the file into an array and then get the index of the line. Problem is that I couldn't find any information on how to do it. Can someone give me a shot. Thanks in advance.

  This isn't a problem with encoding. You just need to do a little extra accounting and adjust start and end indices to remove these characters. To treat the "\r\n" of line termination style, you can maintain a flag (initially false) to indicate that the previous line ended with a \r; If a line begins with \n, it should be treated as the end of a line (empty) if the flag is true (in which case it should be ignored).

  If you want to extract all lines (not just the first), then it may be easier to do this accounting while avoiding a separate function. Something like this (untested):

  // read the file into a byte array 'data'; then:
  Vector lines = new Vector();
  boolean endCR = false;
  int start = 0;
  for (i = start; i < data.length; ++i) {
    if (data[i] = 0xD) {
      lines.addElement(new String(data, start, i - start));
      endCR = true;
      start = i + 1;
    } else if (data[i] = 0xA) {
      if (endCR && i == start) {
        start++;
        endCR = false;
      } else {
        lines.addElement(new String(data, start, i - start));
        start = i + 1;
      }
      endCR = false;
    }
  }
  String[] results = new String[lines.size()];
  lines.copyInto(results);
  

• You can disable a single line within the ACL?

  We have 881g on 15.1 code with a ZBFW.

  In an ACL, ip access list extra blah, with several lines, 10,20,30, etc... is there a way to disable a single line or make it inactive any leaving it in the config? He can't see in there, don't know if it is not possible or I'm not looking for the good things.

  Thank you!

  There is no "inactive" as on the ASA. An entire book would be to do something like

  Note allowed tcp any any smtp log set EQ

  It keeps things in the config, but it does nothing since it is a comment.

• Arrow line (single line with an arrowhead) in MS Paint Win7

  Is there anyway that I can draw an arrow line (straigt single line with an arrowhead at the end) in the new MS Paint in Win7?

  The following items may be worth a visit:

  Windows 7 - paint help
  http://Windows.Microsoft.com/en-us/Windows7/using-paint

  Windows 7 - getting started with paint - tutorial
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-paint

  Windows 7 - How to add an arrow to a screenshot
  http://www.allsandiegocomputerrepair.com/693/how-to-add-an-arrow-to-a-screenshot/