Designjet 1120PS: Riddle of Scan axis 1120PS DJ

Similar Questions

• Designjet 4000 PS shows error 86:01

  Hello

  I bought a Designjet 4000 opportunity. He came, I started the printer and it started printing a testchart with colors about 30 x 40 cm. Then it stopped and showed a 86:01 error. There is no paperjam, but the belt was in very poor condition. So I changed the belt, but the error still occurs.

  As a precaution, I changed the encoding Strip, but the printer showed error

  Test run of axis of scan in the works of service for a long way mode. The movements of the printing in the Middle unit, can be moved by pressing the arrows, he tries the printway by moving to the left and to the right, the distance ist ok. If you come from the right side after that, he moves about 10 cm and stops with an error 86:01.

  The display shows the long version of the error:

  Code: 0 x 18010001

  Severity: error

  Priority: 3000

  ID: 0x101021a

  Description: STRING_MEDIA_JAM

  File: CarriageServoMotor.c

  Line: 1537

  Class: Scan axis

  Subclass: movement

  Error: Transport jam

  Set: DRACO_SCAN_AXIS_MOVEMENT_JAM

  Description: Jam of transport

  Of course, I cleaned and oiled the stem and sliding. The trolley can be moved smoothly, I would say.

  I changed the motor, belt - no change. I called HP Support, they commended for changing the diet, I have still no change.

  I don't understand, the printer worked first with a belt of poor and now in test mode flies over all printway for several times before running into error. And modifying in part after part on spec, will be a costly way, I think. Any idea? Thank you.

  After changing many elements - the reason was the new belt! I would say, I have no HP original, but a part of China. Unfortunately I can't prove it, but after changing the belt against the original, the error disappeared.

  Thanks a lot for your messages.

• Designjet Z6200: Z6200 - strange printing defect

  Hi all

  We have a failure happening on one of our printers Z6200.

  Remove us the media and test on other units and do not have this problem, so I guess that excludes media as the question.

  It's a paper coated with HW. We tried the profile for HW and Super HW.

  Please see the attached images.

  Does anyone have an idea how to fix?

  See you soon,.

  Roy

  

  

  Hi all

  Here's what it is.

  Apparently this started happening after a few strikes of transport.

  I checked the Scan axis and everything was fine, but if I ran the Scan axis with the media on the milling table you could here a noise from friction on the media.

  I removed the transport so I could see the bottom and he was there. Two 2 damaged printheads (Magenta / yellow) which were rubbing some along the media to create the default.

  Congratulations to all.

  Roy

• Designjet 1050c Cutter do not operate.

  I searched this forum for old cutter 1050/1055 related messages, but nothing has fixed the problem.

  Here's the background info... I fixed the plotter last summer and it has worked great until about 2 months ago.  He plots fine, but will not cut the paper.  Strawberry is 'on' in the settings and the driver is set to cut as well.  It will NOT cut off when you press the button "form of power and cut.  It advances the paper and a few dances around the arm of the actuator of the left side, but never out.

  Here's a video of him during this operation of FF/Cut:

  http://www.YouTube.com/watch?v=Vb_A-At48x4

  Maintenance last year included a new belt would be rebuilt module transport & electronics, new drive cable and a new tensioner.

  Since he left the Cup, I replaced the (new) MICR band, Strawberry (again) and a new belt.  Still doesn't fix it.

  It passes the test of the electronic module (firmware A.01.17), network. Scan axis is with record.  What I'm missing here?  I'm out of ideas.  Part of me thinks that this is a problem with the firmware, but I'm tired of throwing money at it without a good reason.

  Plotter fixed.  There was a problem with the circuit of the value axis.  The technology could not immediately identify the problem, so he sent another refurb could take.  Everything is good now.  It will continue the fix, Member of the Board, but he wanted me to operational.

  Thanks to Vincent LeTech solutions!

• HP Designjet Z6100 42 inch large Format printer is not all the printer menus

  So, I've been running some diagnostics and maintenance of my printer recently, including a maintenance #2 replacement parts together, and I'm unable to find the service on the printer menu.  Most of the parts that I replaced (for example, sensor line) indicated that I would need to run a calibration for the newly installed part (calibration of the sensor line).  He says find the calibration solution in the submenu of the calibrations of Service.  The problem is my printer does not have this menu anywhere.  My firmware is up to date as of January 2015 (when I've recently updated).  My printer is having a few problems print quality I would try setting the menu of calibrations.  Anyone has an idea why my printer isn't this submenu, even if everythwere online (including HP) said that it should?

  By ensuring that the nozzle adjustable blue on the PIN is not pushed too tight, and eventually clean the ends of the axes and the regions in that axis fits, I've never had this problem on this model.

  You select the choice of appropriate support in the menu paper during the installation of this special paper?  Is only on this paper that you have this problem?

  The menu system can sometimes be difficult to penetrate, now a key too long or not long enough can cause do not enter service mode, there are two ways to enter mode service, one for telephone support for customers, one for the technicians.  I will paste this again to see if it helps.  I would like to make the calibration of paper feed.

  Once the "Ready" message is displayed on the front panel, scroll to the installation of the printer.
  The icon Options"and press the Enter key.
  2. Once inside "Configuration of printer Menus" menu, press UP or down arrow key and the
  Button cancel together. You are now in the Service Tools Menu.
  NOTE: If ALL calibrations should be performed (for example, when the two HARD drive and)
  the ISS PCA have been replaced), you must perform them in the following order:
  • Calibration under vacuum.
  • Drop detector/Service Station calibration.
  • Line sensor/Scan axis calibration.
  • Paper advance calibration.
  • Platinum Blue Line Calibration.
  Press OK to
  confirm the selection
  Exhaust and
  Key
  to select
  Press Cancel
  key
  PHONE SUPPORT
  Press down
  key

• Error code for 5000ps 0b000e 00000001

  I have change the belt and the trailing cable into the printer, and when he started to the top I got the "system error" 0B000e 00000001.

  What should I look for?

  Brent

  Nothing to do with the fan. See below:

  System error 0B000E (not no blocking)
  Explanation
  Turned on, the printer think she's less than 42 inches.
  Recommended action
  Turn of the printer (using the switch at the back of the printer) and look for obstructions in the path of transportation (Scan-axis) and remove if found. Turn on the printer.

  Make sure that the coding is clean (only clean gently with a damp cloth) and some lines are missing. Stick a WAD of paper in the lid button open on the right side, so you can watch the action of the transport as it moves. With the power off, open the door more clean on the right side and pull the tray cleaner. Now move the carriage to the center of the plate, so you can see how it moves and where it stops with the error.

• HP Designjet T2500: How can I scan documents without using the main table with the HP Designjet T2500 printer?

  Hello, in my office we recently bought printer HP Designjet T2500 and, so far, works great but I have a doubt with the procedure of the Analyzer in the case where the main panel is malfunctioning. How can I scan a document without the help of the main panel or a plan?

  I know the printing can be done with the supplied software, but he made no reference to the case where we need to scan a document.

  Any help will be great, thank you.

  Hello

  Analysis cannot be done froom the front panel of the printer.

  If you have a problem with the Panel, you will need to repair the device because you won't be only able to scan, as you will not be able to load paper or calibrations.

• HP designjet 4500 36 "scan: scan HP designjet 4500

  I wish this scanner with usb with win 10 connection to ise, or win 7 but ı can not find a driver for scanner. It was made contex co for the hp md67m model No.... Number of Q1277a of hp... (Pc scanner does not work so I bought the new pc to scan...) I then need driver)

  Thanks for your interest. I try to use the software context but ı couldnot find dg67m maintarance driver file... So when ı use usb com 'unknown device' soft contex pc "there is no scanner find" "then?
  
  I even look at scan time on contex... G600 series like 4500. I have ıse this scanner softvare. If you know any model on contex-same with dg67m please write... Thank you...

• DESIGNJET HD SCAN CQ654B: CQ654B

  Hello

  I have 3 messages showing:

  -The scanner lamp needs to be replaced

  -The scanner air filters needs to be replaced

  -Maintenance kit required #1. Pleace contact HP to order the kit.

  Could you let me know the numbers part that I would need to order?

  See you soon

  Hello

  This is the number of piece Q1277-60013 FLUORESCENTS

  The Internet should come with the lamp.

• DesignJet 1050c more Electronics Module Test

  Hello, all.

  A few weeks ago, we replaced the belt on our more tracer 1050c DesignJet.  After restarting the printer, he would end the scan of the axis.  Did a bit of reading and greasing and decided to try again today.  Today, it is said that there is an error with the electronic module probably with the spray fan.  From what I gathered, the more does not use a fan of the aerosol.  Is this true?  Any of you have an idea as to what could happen?

  Thank you.

  We had a service technician come and fix it Wednesday.  The coding Strip has not been installed correctly.

• Scanner HP DesignJet HD Pro: Upgradw the internal memory of the Scanner HP DesignJet HD Pro

  Hello

  Is that it may be possible to update the internal memory (RAM) to scan HP DesignJet HD Pro. Default scan has 2 GB RAM and 500 GB HARD drive but I want to update RAM from 2 GB to 4 GB on HP DesignJet HD Pro Scanner (P/n: G6H51A).

  If, Yes please share with me part of the RAM only.

  Thank you
  Rashed

  Hello

  RAM and HARD drive are not expandable.

• Designjet z6100: Z6100 do not print correctly

  I tried to print to my DesignJet z6100 after update to windows 10 but the machine will not print to something greater then 14 ".  I have a 24 "roll loaded on the machine and when I try to print with photoshop, I select a page 16" x 20 "size, but it prints just 14" and then cut the rest of the image.

  The printer is reading so I know that's not that media to 24 ".  It seems that im missing some menu items in the print settings that I can not select a custom paper size dialog.  my software support HP tells me that my drivers are up to date, it reads as a pilot class HP designJet z6100 42 inch.

  Any ideas what could be the cause, or is there something else I should do to print on this machine?

  OK so I finally understood this point, I have listed the steps below in case anyone else had this problem.

  1) download the drivers from the HP website

  (2) unzip the drivers in a folder somewhere you can find it (I put it on my desk)

  3) go to start > settings > devices and click on add a printer or a scanner

  (4) after scanning, an option that says 'the printer that I want isn't listed"will appear. click it

  (5) select "add a local printer or network printer with manual settings.

  (6) select your printer is connected to the port (because mine is networked, I selected the IP address of the printer that was rated) and click Next

  (7) select "have disk" at the bottom right

  (8) select 'Browse' and that it points to the folder that was unzipped earlier.  There should be a file that appears, select it.

  (9) from here must install a driver called "HP Designjet 42 inch Photo HPGL2" it's the one you want.  You can share or not, I've selected do not share

  The "class driver" is the software an HP and windows tries to install, but it has very limited functionality.  Honestly im a little upset I fgure on all this for me.  the HP less could do is put som instructions for installation with their drivers in a readme file or on the site.  Instead, they just give the files you and waiting to discover by yourself.

• DJ T2300ps Scan to network

  We have a T2300ps DesignJet that until recently had no problem scanning to a network shared folder. Now, however, when we try to scan the folder with the tracer (or connect to the web interface of the plotter file) we get the following error:

  The shared folder could not be accessed properly. Check the configuration of the network folder, then check that the folder is shared correctly.

  We checked all the network settings (DNS, gateway, etc.) for the drawing board as well as on the network folder sharing settings and it seems that it should be able to connect, but he can't.
  

  Does anyone else have this problem or something similar? Guidance on how to fix it?

  The question is usually on the configuration of scan of the direct axcess to the shared folder, for example the computer name, the user name and password to log on to this computer.  Information should allow HP to access the folder to scan on any computer you use to send scans to.  If HP is unable to find a direct path to the shared folder, then it cannot parse.

• Designjet 4200: Designjet 4200 drivers scanner large format

  I have a designjet 815mfp which has a designjet 4200 scanner. The scaners computer died and I am tring to use a new computer, but I can't find the drivers for the scanner. I found the CD - software scanning HP Designjet - Q1279-61001, but when I go to order it, my credit card will not cross. I tried several times this month with different cards. Is it possible to buy or download the drivers for this scanner?

  Link to the cd:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=298994 & swLangOid = 8 & swEnvOid = 228

  e-mail address mailing & I send you a copy.

  XP driver & scanner software.   does not work with win7...

• CM719A - HP Designjet T1120 SD: do I need a sheet of calibration for CM719A - range of printers HP Designjet T1120 SD-MFP

  Do I need a sheet of calibration for CM719A - HP Designjet T1120 SD-MFP printer range?  If Yes, where can I get it?

  Looks like this would be a necessary element for accuracy of current scan. But I'm not 100% sure for this scanner.

  Thank you.

  The item is expensive.

  http://www.sparepartswarehouse.com/HP, Printer, share, Q127760030.aspx