Designjet 5000 + HP solutions Center

Similar Questions

• HP Solution Center does not work after installing Windows 10.

  After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

  Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

  Or, is there a way to fix it?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• Photosmart D110A: Solutions Center HP

  I got HP Solution Center on my computer for at least 18 months.  All of a sudden, it doesn't work because it says that the device is not over.  I uninstalled and reinstalled.  Still the same message.  The printer works - wirelessly!  I know that it is connected.  Why the Solutions Center does not work?  The Solutions Center is on my desk - but it does not work.

  Hello

  Thanks for your comments.

  Could you just uninstall and then reinstall it again?

  Thank you.

• HP solution center in windows 8.1

  I have a printer HP Photosmart Premium C310. I have a new laptop and you want to install the HP Solution Center. The disc that came with the printer does not work on my laptop running Windows 8.1. Any suggestions please? I would like to be able to scan from my computer again. Thank you very much.

  Hello

  The drivers are downloadable at the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158 & LC = on & CC = US & DLC = in & sw_lang = & Product = 4231205

  Watch the video for instructions.

• HP Photosmart 2570 - scanning parameters not no projection in the HP Solution Center software

  Everything worked, and then it stopped working. After several uninstalls and reinstalls, I have running HP solution center software but don't show any scanning settings. I am not able to scan. The button to scan does not yet show upward.

  How can I get the scan to show button and do scan?

  Try bypassing the solution center to access the scan function.

  To work around the centre of solutions for scanning:

  1. Click on the on the start menu.
  2. Click on computer.
  3. Open the C drive.
  4. Open the Program Files (x 86) folder.
  5. Open the HP folder.
  6. Open the folder of digital imaging.
  7. Open the bin folder.
  8. Run the hpiscnapp.exe.

  If the hpiscnapp.exe shows the scan options and allows you to scan, then right click and create a shortcut on the desktop, then you won't have to dig for it every time.  I was going to name the shortcut something like HP Scan, so you know what it is.  Let me know what happens.

• Software downlaod HP Solution Center

  I uninstalled my HP Solution Center software, as fax leave work (prompt gray bar).  When I tried to reinstall, I had the wrong software for my all-in-one printer for Windows 7 64 - bit OS and my Officejet 4500 G510n.  Where can I find the right software to download.  I had version 13.0

  Ho EmpressOfData,.

  There is a full feature listed for this printer software that is supposed to work with Windows 7, 64-bit.

  Look in:

  Category: 'driver - software product installation.

• My HP Deskjet F2480 solutions Center. CAN; Open t, no icons. Download the msg of error.

  Cannot open on HP Deskjet F2480 all-in-one HP Solution Center.  Can print and copy but will not scan.  ' Get the error msg: parsing error in file c:\Program Files (x 86) \HP Digital Imaging\bin\hpqscloc\1033.xml.  I've tried 4.2 HP Diagnostic Utility.  have uninstalled and reinstalled several times.  No effect.  Help, please.

  HI Pissedpenguin,

  Run the following screen to uninstall the printer and then download the full software functionality and the driver from the link provided.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 download the driver and software complete features.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-72254-3 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3811337 & sw_lang=.

  8. launch the downloaded software

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 download the driver and software complete features.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-72254-3 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3811337 & sw_lang=.

  8. launch the downloaded software

• OfficeJet 7310 all-in-one: HP Solution Center software

  I use "HP solutions Center" scan on my 7310 all-in-in-one software. I have upgraded to Windows 10 & it worked just fine. I just got the latest update of Windows-10 last week. Now, HP Solution Center does not open. When I click on the desktop icon I get anything other than an alert tone - no other indication of what was wrong.

  I uninstalled the driver & it is reinstalled from the HP site - no change.  I have Windows-10 was last updated. I used the diagnostic tests HP & test progs and I know for printer and scanner will not work. The problem seems to be in the service of the HP Solution Center software.

  Also I tried to download the app 'HP Scan & Capture'. It won't download-

  Help, please.

  Hello

  Thank you for using the forum.

  You can find the solution here:

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/HP-Solution-Center-fails-to-launch-cannot-...

  Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

  Windows 10 - How do I uninstall and hide updates

  https://goo.GL/3tWxyA

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• SOLUTION: Get Win 7 printer drivers/HP Solution Center for work on Windows 8

  Took me some time to understand it, but I managed to do the work.

  First of all, the preliminaries:

  I have a laptop HP dv9700t running the 64-bit version of Windows 8 Pro RTM (not the preview, but I guess it will work as well on the preview).  My printer is a HP Photosmart C7280.  If you have a different printer, it is possible that something similar to how I solved my problem will help you, especially by running your installation in Windows 7 Compatibility Mode files.

  Windows 8 is provided with printer C7280 stock drivers that work by going to control panel > printers and devices > add a printer, but there is only limited to those features.  As such, I wanted to run the HP Setup files have increased functionality.

  Unfortunately, when I run the full installer of HP for my printer, there was no button 'Install a printer', or one of the other usual buttons.  There was only one button "quit".

  Here's how to let him run and install correctly.

  Right click on the HP full installation file, then properties > compatibility > then check the box "run this program in compatibility mode for:", select "Windows 7" in the drop-down list box, then click on 'OK'.

  Run the installation file as you would normally in Windows 7.

  I tried this two ways... first when you're connected via a USB cable.  It works perfectly without error.

  I also tried with the printer connected to the network via WiFi.  A few problems.

  The installation program detects my printer very well, and I clicked 'Next' or 'OK' or whatever the prompt was to install the printer.  The installation would hang 'Response of SNMP' (or something similar) and it would list the IP address of my printer.  I waited, waited, waited for an hour, and it would not go beyond that.  Not to worry.

  Proceed with the normal installation until you get the message 'Response of SNMP' and the installation fails.

  Enter with CTRL-ALT-DEL Task Manager.  You will see an entry in the 'Apps' to the installer of HP... DROP.

  Below the "Apps" list, you will see the list of "background processes".  In this list is something along the lines of "HP Network Interface user", or something similar, consuming a significant amount of CPU.  Highlight this entry and click "End task" downstairs.

  The "SNMP" window closes and your installer will end then normally and your printer/fax/scanner will be installed correctly.  HP Solution Center works normally, like printing, scanning, etc.

  The next person who uses that will give a few comments and also answer a few questions for me so I can update this post with more specific information?

  Please let me know what is the exact "SNMP" message when the installation is blocked.  Please let me also know that the exact name of the background process "HP Network User Interface" is, and the name of app Installation HP.

  I hope this will help you.

  Glad to hear that a form any of my solution works for others.

• Win 8 - Photosmart c4580 not scan with HP Solution Center lack wifi

  HP Photosmart c4580

  8 64-bit Windows

  My printer is Photosmart c4580, and I have Windows 8 64-bit operating system.

  I can print throw my wi - fi connection, but I can't scan.

  If I want to analyze I need to plug the usb cable (10 meters long, because the printer is in the other room).

  I want to see the level of ink and I can't because I don't have the win8 HP Solution Center.

  Try to install the drivers win7 and Solution Center (PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe) (propriety - win7 run mode), and the program crashes.

  What can I do to scan using my wifi connection and installation of HP Solution Center

  Thank you

  Everything is ok now with the new drivers.

  Thank you

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109997-1 & CC = UK & DLC = in & LC = on & os = 4132 & Product = 3418707 & sw_lang = El

• Why the HP Solution Center loses my documents after scanning?

  While tryning to scan a document, the document, but the document "digitized" HP Solution Center ever recorded. I changed the output type (.pdf, .tiff, etc.) and I've changed the "save to" folder, no joy. Since I am on Windows 7, I downloaded the patch "DOT4" and re-installed the software and... nothing. Noticed that the "open file after the backup" function has failed when I tried it either. Help!

  Seems that there is an update to fix the component that controls it.  You can get the update from the link below.  Let me know what happens.

  http://support.HP.com/us-en/document/c01960605

• Using the HP OfficeJet CM1312nfi Solution Center

  Why my OfficeJet CM1312nfi will not work with the HP Solution Center?  I thought it was part of the initial installation package.

  Have you served Color LaserJet CM1312nfi?

  The HP Solution Center is a software for consumer inkjet devices and is not a part of the laserjet software.

  probably, it still exists on your PC from an older HP device.

  Kind regards

  Shlomi

• Where can I download HP solution center software?

  Her husband and I have almost the exact same HP laptops. For some reason when he called HP to download the software for Win 7 for our printer (model J5780) the person tech installed Solution Center. (My person tech did however)

  So can someone tell me the link to download the Solution Center?

  Here's what he has his laptop:

  

  The full functionality of the driver link is the one you want for the center of the Solution, it will install the driver full and the solution Center.

  For others looking for HP Solution Center for their printers, click HP Support here, then enter your model number and click Next.  There may be several options of products, click on your exact model (or the closest choice) and click on "software & drivers".   Under Option 2, click GO.  Looking for a driver full features.

• HP deskjet hp Solution Center 1051

  I am trying to print envelopes and my printer prints off images on the side. I know not how to solve the problem, but unfortunately so do I need to go to "HP solutions Center" and I have not installed on my computer. I'm running on Windows 7 and that you have installed the full download of features for my printer. How to center of HP solutions now because it did not come with my install?

  Hey,.

  These options, if they are available in the driver for the Deskjet 1051, are accessible without having to go through the solution Center.

  • Click the start menu on Windows 7 PC
  
  
  • Select the devices and printers
  
  
  • Right-click on the Deskjet 1051 installed
  
  
  • Select print options
  
  
  • Select the paper/quality tab or similar (I don't have this printer available to perform a test installation and view options)
  
  
  • Look for an option similar to the one mentioned by Praveen_David custom paper size

  If these options are not available in this section, you may need to use another driver with the option for custom paper sizes.  Research on the product specifications page, I found that the printer uses PCL3 GUI for printing language.  This means the Deskjet 9800 driver built-in to Windows Update will be compatible with the Deskjet 1051.  Deskjet 9800 driver has built in custom paper size options.

  Click here to access a thread with information on how to exchange for a different driver such as the Deskjet 9800 driver.

  Let me know how it goes.

• OfficeJet J4680: HP Solution Center has stopped working with Windows 10

  From today, after the last version 10 of Windows Update to the HP Solution Center software won't start/open.  After clicking to open, there is a beep and nothing.  No dialogue error or indication that something does not, but the program does not start.

  He had worked all the way up through yesterday with the latest versions of the Solution Center and Windows 10 installed.  The only change was an update today which says that it was just an update to the flash player security.

  I uninstalled and reinstalled twice, checked to make sure that my private network settings were OK, all to nothing done.  I need it to scan documents.

  Anyone with ideas?

  There is a problem with the last Windows security update.  It disables some flash programs, including the HP Solutions Center uses to load.

  Here's a solution:

  Enter "View installed updates" in the search bar of Windows.  It will show you an option in Control Panel.

  Click the appropriate option.

  Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.

  Click on uninstall and work through all the guests.

  Once uninstalled, the HP Solution Center will work.