Designjet Z2100: Designjet Z2100 flees

Similar Questions

• Designjet z2100 predefined paper sync to the driver using the HP utility is greyed out.

  Hi all

  I have a z2100 24 "on the latest firmware v9.0.0.5 (November 2012) and the latest drivers installed on Win7 64 bit OS. Last UTILITY.

  I downloaded a Preset paper HP (HP Everyday matte adhesive polypropylene) from the HP website and downloaded the document preset to the printer. The predefined paper displays on the front panel of the printer under custom paper types. If it worked.

  To synchronize the document for my permit profiles now, I need to use the HP utility, but PROFILES PAPER SYNC icon is grayed out. Therefore, the paper type is not available in my driver. That's my problem.

  Any ideas why I can't sync the downloaded document preset on the driver using the HP utility?

  Thank you very much

  Charl.

  This forum focuses on the level of consumer products.  For the Designjet you can have better results, post in the forum HP Designjet here.

• Designjet Z2100: Buy a used Z2100. This who should I look for?

  I am considering buying a Z2100 used to, essentially, a few cents of a liquidator for recovery.  The printer has remained for months with no cartridge but some print heads (I know are probably trash). I have an another Z2100 that I can borrow the ink and the heads of the test, but only after I have to engage in the purchase and replace the timing belt.

  What should I look for? I don't mind sinking maybe $1000 in there, but I'm evaluating my risk of becoming much more expensive.

  Thank you!

  Z2100 8 color and print quality has not as good as the 12 colors like Z3200 etc.

  If you serious about print quality, sped up your money for the newer model.

• Designjet Z2100 driver problems

  Hello

  Am I the only one having problems with the new drivers Z2100 (Oct 2014)?

  The new drivers work just fine, unless you try to synchronize the printer paper profiles or add a new custom paper profile.

  If you sychronisé the paper profiles, the section custom from the list of available documents has all other profiles listed as well as a new.

  If you try to select any profile paper in the full list this choice is not displayed in the window type of paper in the drivers, and if you click on the button "Refresh" the drivers block the application you use.

  I reinstalled the drivers several times and also tried the drivers on a bare, new instalation of Win 7 64 bit with no application installed. Access the driver dialog via Windows devices and printers. The result is the same.

  I'd be curious to know if anyone else has the same problem.

  Hello

  On this link, you will find step by step instructions

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer (Look less to remove a printer)

  To remove the printer from the registry follow the instructions in this link

  https://support.Microsoft.com/en-us/KB/102116

  NOTE: Be careful when you remove the printer from the registry. System keys deleting can cause problems with your operating system

• Designjet Z2100: HP Designjet Z2100 does not print MK

  I have a HP Z2100 44 "which is out of warranty for several years.  Recently, we noticed that the color printing large format have been turned off (do not look right).  Finally, we ran a diagnostic image (see below) and found that there is no matte black printing (MK).  All other colours print completely and correctly in the image diagnosis, except MK.  I ran this test with bond paper and glossy photo - the results are the same.  No MK ink is printed during each test.

  We replaced the cartridge MK both MK/Cyan printhead, but the problem persists.

  Any suggestions for how to start troubleshooting when one color is unable to print?

  Thank you

  Jer

  

  This question seems to have been caused by other defective printhead.  I had already replaced the printhead, but it replaces a second time seems to have solved the problem.  For the time being.

• Designjet z2100: points with every print

  I have a row of points on one side to each print.

  Photos below

  

  Could someone tell me what are the causes of the problem?

  The fact that once you clean this area points disappear tells us that the plotter is somehow always disposting of ink in this area. Do what asked the above post and I also want to remove each print head, one at a time and clean up the edges to verify that there are no residual ink being placed down by the edges. Do not clean the center of the printhead with anything as you may damage the nozzles.

• Failure in Hp Designjet Z2100 24' after changing the belt to transport

  Hi, following the repair and purchase belt Hp from an authorized dealer, I changed it, the problem is that after changing printing belt well but makes that transport affects the already printed area and scratches. I disassembled and assembled 2 times and can not find the problem, or any site that allows me to adjust the height of the cart of the role. There's a piece I have left and do not know where it is and if it has to do with the problem, joint photo: https://www.dropbox.com/s/07sc5dlj5i2kh86/IMG_20140314_140850.jpg

  Greetings and thanks in advance

  Here's the pat number: ring rear Q5669-60687 transport.

  It is located on the upper rear part of the truck, it runs on the frame to keep the trolley in place.

• HP z2100: Firmware update would not - is there a way to put the firmware directly on the HARD drive?

  I was really happy to correct my hp z2100 today... lala lala and then update firmware to be updated!

  What a mistake!

  Everything was fine until the end when the printer said it restarts and after that it does not start. I think the drive hard does not have the system on it more and cannot start.

  What now?

  Scroll down this thread:

  http://h30434.www3.HP.com/T5/Designjet-large-format-printers-and-digital-press/Designjet-Z3100-Z3200-LCD-blank-amp-power-green-LCD-blinking/m-p/5075020#M3843

  Maybe it's the same problem, I've had a few years on a Z2100.  Updated the firmware and the printer would not restart.  Reinstall from cable to the screen, and everything came back OK.

• A DesignJet 1055 CM c6075a would work OK with Mac OS 10.7 (Lion) or 10.8 superior?

  A DesignJet 1055 CM (model A, c6075a) would work OK with Mac OS 10.7 (Lion) or 10.8 superior?  I don't have a Mac; I plead for a potential buyer of my 1055CM. The 1055CM currently has 96 MB of RAM; I could put 128 MB in.

  I would get "out of memory" problems?  I think that maybe there is no "computer in process" option in the Mac OS 10.7 for the 1055CM pilot, but I'm not 100% on that.

  I guess it depends on how simple designs are. The application is for printing large topic say 24 "x 24" vinyl stickers vinyl roll.  Well, maybe raises another question: would a 1055CM, printing on vinyl OK?; I guess because they seem to be very similar architecture/configuration as a 5000 or 5500 and these OK printing on vinyl.

  Thanks a bunch.

  Paul

  Hi Paul

  I wouldn't say a 1055 for work of vinyl. There are a few suppliers who can provide a vinyl fot this printer, but it's not too successful.

  First ink 1050 won't last long, it will fade fade very quickly. (you can use a laminate liuid, but time consuming, will not worht it.)

  Secondly, the 5000 series printers have a different ink, it means the UV ink and ink to dye. Two inks are specialised in the printing of "vinyl" or "post".

  Your best bet is to get a HP designjet with Viera of ink, with the correct paper, that they have to use intermediary.

  Otherwise a second hand series Z (Z2100 going quite cheap, comes in a cheaper A1) these printers have pigmented ink which have a longer life of the door.

• HP designjet 450 c drivers after Windows XP

  I have a recently purchased Designjet 450 c, flea market, but a good one nonetheless. As an amateur genealogist I use, mainly for printing large family tree, cards etc.

  Now I learn that Microsoft are determined to get rid of their XP operating system an OS I've used consistently for many years, the main reason being that Vista and 7 is a not only deliver to an old-timer like me.

  I love my designjet 450 c and want to know if I am forced on the road to meekly accept Windows 8, I'll be able to locate a driver for my printer. Anyone know what the story is on this one?

  EDEK

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do so at http://h30499.www3.hp.com/hpeb/

  I've included a URL to the drivers, Software & Firmware for printers HP Designjet 400

  I hope this helps.

• Designjet T120: HP T120 error BA7F11E0 designjet

  We have a HP designjet T120 when power on/off, this (BA7F11E0) error message appears on the screen immediately.  No movement of transport or initialization is performed. Just the error and nothing else. Pls help.

  Thank you

  Hello

  Try to isolate the printer, remove the printhead, inks, connectivity cables and turn on the printer.

  If the error persists, it may be a problem with the APC hand.

  Best regards

  Mike G

• DesignJet 130nr: canvas print Designjet 130NR

  Print on canvas of sheet (13 x 19) on Designjet 130NR works very well. Called HP Support asking if there are 24 "canvas rolls that work. Told me and it makes sense, the tool can not handle the Cup fabric.

  Someone at - he found and printed successfully pre-cut large canvases for the 130NR? I've got a good big letter opener, but as anyone who uses the 130 know, it rejects easily paper cut perfectly.

  Thank you

  Marty

  Hello

  Strawberry is not really designed to cut the canvas. Is too thick

  You can still use it, but you will need to replace it more often.

  If your knife used to work, you may need to replace it now

  Here is the part number Q1292-60064 Media knife

• Designjet t125: designjet t125 blue screen error B332347C

  Hello.

  I was ask to get this error:

  When you feed the plotter that blue screen appears with this code: B332347C

  I can't find the service manual for this, if anyone can help me?

  HELO try this solution
  You need to replace hp designjet encrypted t520 chip on the motherboard inside the plotter
  You can buy it on ebay http://www.ebay.co.uk/itm/HP-Designjet-T520-Blue-Screen-Error-Solution-Encrypted-chip/282223353841

• Designjet t520: designjet t520 error b3d73738

  HP Designjet T520 36 inches gives b3d73738 on the screen, never seen that before and isn't anythong on this subject,

  the printer does not start or let me take any operation

  need urgent hepl on this issue.

  Thank you

  Hello

  Try the following

  -Replace the power cable

  -Connect the printer to a different outlet

  -Isolate the printer, remove the ink cartridges, print head, cable connectivity

  If you still have problems, you may need to replace the APC's hand

• Designjet T520 36 inches (CQ893): Designjet T520 36 - in

  My tracer: HP designjet T520 36 inches (CQ893) start.

  The screen is blue, B87E7114 error code

  Turn off and turn on probably. Power button 15 seconds and powering button 50 seconds also.

  If push yellow power light. power on no beep error.

  End of warranty: 2015.02

  What is my error code?

  Thank you

  Sorry, but your post is very confusing.  You've got an ok error code, after that I do not understand what you mean by switch / stop and seconds.  First thing you need to do is to unplug the plotter of the power source.  Wait about 30 seconds and plug back in and if the power does not turn on by itself, use the power button to turn it on and tell us what appears on the screen.