Deskjet 1000 printer - J110a: printer prints a blank Page - HP anthentic color and black ink cartridges are full

Similar Questions

• I can't go to my printer. It will not recognize the ink cartridges are full!

  My epson 7400 has not been used for 6 months. I cleaned and aligned the nozzles and it used 2 full cartridges. I installed new ink cartridges, and he says they are empty. Now none of the buttons work, it does not seem to recognize all commands. What should I do?

  Hello

  Turn the printer off

  Unplug the printer from the computer and the wall outlet

  Reinstall the cartridges

  Support all the ink cartridges until they snap into place to make sure that they are well housed

  Close the cartridge cover and push it down until it snaps

  Close the scanner

  Press on the Stop button to start loading of ink. It takes about 2 minutes.

  When the the light stops flashing and remains on, the ink load is complete

  	Caution:
  Never turn off the Epson Stylus CX while ink is in charge or you'll be wasting ink. If the ink light flashes, press on the Stop button and lower all the cartridges safely Manually clean the print heads Plug the printer into the wall outlet and the computer.  Turn it on and try printing again. Updates

• E all-in-one HP 3520, ink cartridges are full but are only printing header and footer in blue?

  performed a test page to the printer is only printing in blue ink. printer is running on Windows 8, please let know us if I need to re install or download updates

  Hi Colleen48,

  I see that you are having problems with your printer.  I have a few questions.

  When you print the test page only blue ink prints?

  When you print only blue ink is printing?

• OfficeJet Pro 8500: Office Jet Pro 8500 blue print as rose/violet-all ink cartridges are full?

  Something blue prints as a pink/purple color.  Recently replaced the Cyan cartridge.  No other cartridge is the replacement level yet.

  Ideas?

  Hi @KFDLou,

  Please try these steps and getting back to me.

  As indicated in the document "If there are still defects on the page after the print head has been cleaned once, go to solution to replace one or two print heads."

  Solution 6: replace one or two print heads

  If you have done all the troubleshooting steps and you are still experiencing a problem, replace the printhead.

• All my ink cartridges are full and installed the printer not print one color. Help?

  Photosmart C6380 is a color print not all full. Can anyone help?

  Perform the print cartridge cleaning procedure.

• HP Officejet 6600 won't print because the yellow and pink ink cartridges are exhausted?

  I need to replace? I want to print in black and white not color so, how do I fix?

  Hello

  Many IIC printers will not print (work) when a (whole) depleted cartridge. Some still unable to print, but a tiny snail. In short, you must purchase the new color ink.

  Kind regards.

• My printer epson stylus cx7800 blank paper prints. Cartridges are full

  It is as if printing correctly, however the documents come out in white! cartridges are full and everythings shows it should work.

  My guess would be that you need to clean the heads.

  http://files.support.Epson.com/htmldocs/cx78__/cx78__ug/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Epson&file=maint.htm#wp1021512

  John

• DeskJet 5550 does not print after I installed new black ink cartridge.

  I recently got a new Dell with Windows Vista 64 - bit OS.  Printer was working fine until I replaced the black ink cartridge.  Print the control page as usual after you install the cartridge, it will not print anything else now.  Not even a test page.  I tried taking the cartridge out and put it back in.  Tried to pull the plug on the back of the printer and plug it back.  Tried turning the printer off and on again.  Also tried to restart the computer.  I downloaded the HP Print Diagnostic report and could not find any problems.  Could there be a problem with the ink cartridge itself?

  Well first of all, I went and bought a different black ink cartridge to remove the cartridge in the problem.  This was not it.  Then I unplugged the printer and cleaned thoroughly and connected plug.  Still did not work.  Then I went into the properties on my printer and started to play with the settings.  FINALLY I FIXED IT!  I clicked on the tab advanced and then click Print Processor.  I then changed to WinPrint and retried the Test Page printing under the general tab and it worked!  Woo Hoo!

• Why my printer won't use his black ink cartridge

  I recently bought a printer officejet 7500 a large format. We use it at home with a computer wireless windows laptop and my mac running OS X 10.6.8

  No matter what I put in the black and white print settings, etc., he will not use his black ink cartridge. It uses color for all printing cartridges no matter what it is. It becomes very expensive and annoying. Since the purchase of the printer, I bought a black cartridge HP new from PC world real.  Since the purchase of this, he has never used since.

  What we're doing wrong?

  Thank you.

  If the device does not black ink print, it may be a couple different things, the cause.  Have you tried to run the print head alignment feature in the configuration menu of the printer?

  If the unit is not aligned correctly, while she can have colors (including black in this) lack of printed documents.  Check out the steps described in the document, found here, to solve a problem of printing such as this one.

  Let me know how it goes.

• HP Photosmart C309a does not print after I installed new black ink cartridge.

  Printer was working fine until I replaced the black ink cartridge.
  Does not print the text in black on the printer test page.
  The States new HP printer installed cartridge.
  All other colors are working well and were replaced at the same time.
  Tried cleaning cartridges - pulling the cartridge and put back in - turning the printer off and on again.
  Also tried to restart the computer.
  Could there be a problem with the ink cartridge itself?

  REAL SOLUTION. I had the same experience, spent hours pulling my hair like children had project do to school and it was 22:00.  Your cart is clogged! Here IS THE SOLUTION! (: 1) remove all ink cartridges. (2) extract the carriage that circulate in the ink cartridges by lever on the right and the trolley lifting vertically. (3) wipe any accumulation of visible ink on the outside with clean cloth or paper towel. (4) THIS IS THE KEY: keep transport under hot running water to empty all the handwritten entries in the irrigation channels that distribute ink. Keep rinsing in clear water i.e. no sign of ink. (5) trolley dry with clean cloth and blowing in areas, you can access in order to remove the remains of the water. (6) let transport air-dry overnight. (7) Re-install transport, then reinstall the ink cartridges. 8) ENJOY YOUR PRINTER. (9) I saw many entries on this topic dating back two years, without real solution offered. I am an automotive engineer in unemployment. If HP (or anyone else) would like to hire a smart worker, engineer in the Detroit area, please inform. Thank you!

• Canon S820Printer my printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full.

  My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print.  Ink tanks are full.  What bad past and how to fix it?

  If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783

  - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8844
  If all goes well.

• HP Deskjet 1000 printer J110a: download printer drivers

  I quite accidentally deleted the driver for my printer.  Repeated attempts to download a new driver from the HP website have failed.  As far as I can tell it is saying that it only works for Windows 7 and more.  Apparently, I have but can't find out what Windows I have other than Vista.  I can't find any disk that could be with the printer when it was purchased several years ago.

  Please help me find my printer use.  The program on my computer to make documents seens someone else has (Microsoft Works word processor), it seems that I can't take my documents to be printed anywhere.  A place called save them in pdf format, but is not an option my computer gives.  I considered buying a different document program but I don't know that this portable 8-year-old is to put $65 in new software.  I have also considered buying a bu new printer that I have worked very well until I lost the drivers.  Help!

  annmarie0403 wrote:

  I quite accidentally deleted the driver for my printer.  Repeated attempts to download a new driver from the HP website have failed.  As far as I can tell it is saying that it only works for Windows 7 and more. .....................

  Hello

  It will also work with Vista. Please download the software and driver and installto following at your computer.

  http://ftp.HP.com/pub/softlib/software12/COL34557/DJ-109016-3/DJ1000_J110_1313-1.exe

  More information:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-1000-Printer-series---J1/4066042/model/4066376#Z7_3054ICK0KGTE30AQO5O3KA30R1

  $65! More than the cost of buying a new printer itself.

  Kind regards.

• hp deskjet 1000 printer: hp deskjet 1000 problems

  hp deskjet 1000 printer is about 5 years old and has been under the back seat of my truck. I printed about 25 pages when it was new and not the have not used since then. out of the printer and now I have a dell inspiron laptop computer m531r. connected the printer hp with a usb cord and downloaded the latest update from hp. When selecting "print test page", the printer works perfectly as if it is printing, but paper comes out of the Virgin. I have cleaned the ink cartridges with paper towels soaked in alcohol, to run each test and head cleanning hp offered on the troubleshooting section. ink level indicators show the ink to about 80% full. and I updated all the parameters. I rebooted the printer and the computer. I checked and any document, when selected for printing, the printer thinks it is printing. He's even going the correct speed with spacing appropriate, etc. just comes out blank. There is nowhere any dried ink on the print cartridge heads they are clean!   the printer receives data and think it's printing. Therefore, the system does not give messages of any problem. I am concidering buying new cartridges of hp61, but it is a risk not knowing not if the problem is in the cartridge.   TS

  @tomcat056,

  You are right that there is a risk to replace the ink cartridges. In all likelihood, the cartridges are dried up and the sensor is defective. New cartridges may not solve all your problems of printer. Honestly, printers are not designed to roll the shotgun in your truck. Personally, I would take the money spend you on the new cartridges and buy a new printer.

• HP Deskjet 1000 J110: Intense black print with the black ink cartridge only

  Hello

  I am trying to print the darkest possible black, but simply by using the black ink cartridge. How do I get there?

  My printer is HP deskjet 1000 J110 using cartridge HP 301.

  I do my drawing in Adobe Illustrator and set the color to be CMYK 100 100 100 100.

  If I insert only the black cartridge, the printer will leave empty place where color CMY ink should be or it will fill the space with black ink?

  Basically, what I'm trying to do is to increase the density of ink to the highest possible but only using only the black cartridge.

  Thank you.

  Welcome @didididot,

  Thanks to their participation in Forums of HP! I see by your post that you would like to be able to print in the black as dark as possible. I can help you.

  You can use the mode single-cartridge:

  Use single-cartridge in the HP printer with a single cartridge. Mode single-cartridge begins when an ink cartridge is removed from the distribution of the print cartridge. In the mode single-cartridge, the product can only printing from the computer.

  Source: HP Deskjet 1000 J110 series.

  Here is a document for printing with black ink only (Windows).

  If you use a Mac, let me know.
   
  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• HP Deskjet 1000: Print on full page

  When I print on any size paper, this problem arises.

  To make things easy to understand, just think an A4 (210 * 297 mm). When I print on A4 paper, the width of the image is such that it should be (210 mm), but the height is about 10-15 mm less that it should be (less than 297 mm).

  The same thing happen even when printed on photo paper. (for 4 * 6 photo paper there is an empty space around 5 mm in length)

  Hello

  The HP Deskjet 1000 does not support edge to edge printing without margins, it is limited to a specific which unit margins should not exceed those.

  You can find its minimum margins according to the specifications of paper output > print margins below, the printer may not exceed these margins, which are not printable:

  http://support.HP.com/us-en/product/HP-DeskJet-1000-Printer-series---J110/4066042/model/4066376/document/c02231304/

  Shlomi