DeskJet 1050 J410 no black ink will print.

Similar Questions

• DeskJet 1050 J410 series: 8.1 Windows & Deskjet 1050 J410 series all-in-One Printer/Scanner

  I just took delivery of my laptop Lenovo (windows 8.1) & seeks to activate/use my printer Deskjet 1050/Scanner. I am informed that the Deskjet software is installed BUT I can't progress further. I searched HP Scan & Capture screens & read the "ratings & reviews" (they are not easy reading!)  BUT cannot find how to progress further, between all of this "irrelevance", it seems to me information.  Everyone there to advise me

  Hi @RACONTEUR

  I'm not sure I understand. You say "I am informed that the Deskjet software is installed BUT I can't progress further," what you're doing now, but can't?

  While I wait for you, please use the print HP and doctor Scan. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• HP Deskjet 3520 doesn't print any black ink, will print colors

  I have to keep cleaning print head?  I have to wait 30 minutes between cleanings?  All cartridges are full.  Cleaning how usually takes to lead?  What other problem would be?

  I turned to 'off' in the Properties , the gray levels, and that has solved the problem!

• My Photosmart 5515 no black ink will print.

  It was working fine until I changed the cartridges, now it prints only CMY. I found the page of troubleshooting on this issue, went through all the steps and even exchanged for another new black cartridge. Still nothing.

  OK, the only other thing I can think of would be to reset the printer.

  Follow these steps to reset the printer.

• Photosmart 5520 cannot get black ink to print

  I have successfully install a new black ink cartridge 564 in the photosmart printer 5520. It will print no black ink. However when I print a report of diagnostic quality printing black ink will print the words and rectangle boxes.  On the report there are 4 boxes, one for each color boxes, cyan, magenta and yellow are filled in with each respective color, howerer the black box is empty or the color of the white paper. My estimated black ink gauge says it is almost full. Can some help me?

   I have down loaded new updates and now my ink as been solved problem.

• HP Deskjet 1050 J410 cannot print in black and white

  Hey everybody,

  My HP Deskjet 1050 J410 on 64-bit Windows 7 is unable to print in black and white, even after selecting the option to do so. There is no error message, and the diagnostic tool on the HP site can not solve this problem too.

  Your help is appreciated.

  Hello world

  Follow the steps described in the following document below.

  Troubleshooting print quality problems

• HP Deskjet 1050 J410 printer: cannot display the estimated ink levels

  Something has changed on my system, so I cannot view the ink levels on my printer Deskjet 1050 J410 estimated.

  When I select the icon "HP Deskjet 1050 J410 series Properties", he used to be option to view estimated ink levels.  This option is gone.  The 4 options that appear now are: 1) the HP printer Assistant (which does nothing), 2). Set preferences, 3). See what's printing and 4). Customize your printer.   None of these options show ink levels.

  I have uninstalled/reinstalled the printer software HP using the DVD supplied with the printer.

  I deleted the printer (using the control panel) and then reinstalled the printer device driver.

  I unplugged/replugged the power and USB printer cables.

  I farm/powered down the system.

  None of the above fixed the problem.

  I'm as Windows 7 Home Premium with MicroSoft's latest fixes.   I don't know when this problem appeared - I noticed when I was printing and got a warning message about the low ink level.

  No idea what caused this problem and how to fix?

  Thank you

  rockydean

  I searched the Internet and found something that solved my problem.   The link to information is:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-109416-2&CC=US&DLC=en&LC=en&os=4063&Product=4027465&sw_lang=

  I do not uninstall anything - just clicked on download.

  Now everthing is great to work with the HP printer Assistant.   Finally.

  rockydean

• HP deskjet 1050 J410 series: first levels in hp deskjet 1050 J410 series ink

  I'm unable to check levels of ink on my printer hp deskjet 1050 J410 series.

  I have always used the following method worked well, but WILL NOT WORK today!

  Past the method: -.

  1. click on Control Panel on the desktop

  2. right click on the printer icon.

  3. click on keep your printer (to get the dialog box containing the estimated ink levels wording.)

  My problem:-I cannot find anywhere MAINTAIN YOUR PRINTER formulation that would allow me to access the dialog box mentioned in (3) above.

  Can anyone help please because I am at the end of my mind, I searched everywhere to no avail on the computer for a

  solution!

  Thank you very much.

  Joe

  The steps described in the paper here can help find the ink level for your HP Deskjet 1050 j410 on Windows 8.1.

• DeskJet 1050 J410: HP Deskjet 1050 J410 intermittent printing problem

  My printer has an intermittent problem where when something is being printed, a line will have the empty right in the middle of it (you can see part of the printed information line above and below the Virgin part).   About ninety percent of the lines print correctly.   Even if the cartridge still had ink, I replaced them - this has not fixed the problem, so I thought that the printer was bad.

  This is where it gets strange:

  Some time ago I bought an another Deskjet 1050 J410 (it was on sale and I wanted a backup).  I replaced the active printer with the new printer, thinking the problem would probably solve themselves.   Guess what?  It does the same thing as the old printer.   It doesn't seem to matter what I print (emails, documents,...).

  Thinking that it must be something in the processor (motherboard, printer card?), I turned off the system and left on the printer, then copied a page on the printer as a test.    It is also the same problem.  So now that I'm back to thinking, it is a printer problem.   But how the new printer could have the same problem as the old printer?

  Any ideas what is causing this and how to fix it?

  I ran the diagnostics HP (HP Print and Scan Doctor) and no problems were found.

  I also ran the HP (alignment, cleaning cartridges and printer) Toolbox.

  Is there a software that is loaded directly on the printer and could that be the cause of the problem?

  P.S. before I met this problem about 1 week ago, I had used the printer for more than 2 years and not had this problem.

  Jamieson, of the Forum of Support HP team sent me an email with a link that has several steps to correct the problem, I did.   I am very pleased to report that my problem has been corrected.    Jamieson, Bravo.  You have made my day. Keep up the good work.     I'm curious to know what caused this problem to occur.

• Computer is unabler to commuincate with the series of printer HP Deskjet 1050 J410

  I just install the printer, I did everything well, because he said, he is ready to use, but I get a message like

  "my computer is unable to communicate with the printer" can someone please tell me what I did wrong and how

  to solve this problem? I can make copies, but I can't print or scan

  Original title: I just install a series of printer HP Deskjet 1050 J410

  Hi Bill,

  -What do you mean "I can make copies, but I can not print, scan or?

  It could be that you have a firewall application installed on your computer that prevents communication with the printer, or perhaps you need to uninstall and reinstall the printer due to corrupt files.

  Step 1

  Initially I suggest you run utility HP Print and Scan of the link doctor and check if this solves the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/en/HHO/IPG/Forum/network_diag/&softwareitem=MP-120776-1

  Step 2

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers to communicate.

  I suggest disable you the Windows Firewall and the antivirus temporarily.

  View items-

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

  Step 3

  You can try to update the latest version of the printer drivers and see if it helps:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodSeriesId=4027462

  Step 4

  Uninstall and reinstall the printer and check if it helps.

  Add or remove a printer

  (Also applies to Windows 7)

  For your reference:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I have a HP Deskjet 1050 J410 {a} not contacted the network printer.

  I have a HP Deskjet 1050 J410 {a} printer which is not contacted via the network.

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3 Windows operating system you are using?

  Method 1:

  I suggest review the links and try to run the troubleshooter and check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  Check out the links and check if that helps:

  Network problems

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3795309&prodTypeId=18972&supportTaskId=42468

  Check out the link for more information:

  Solve a problem

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=4027462&TaskID=110

  Let us know if it helps.

• OfficeJet 6500 has more: printer will not use BLACK ink to print in BLACK. Mix of colors rather than use BLACK.

  Printer prints BLACK ink BLACK, instead he mixes the colours to make BLACK.  It creates copies in BLACK only, without mixing colors to achieve the BLACK, but when I ask it to print something it automatically uses the ink color.

  In properties, advanced, I checked the box to print in BLACK only, but did not help.

  In the printing preferences, shortcuts, where it says printing in grayscale, do you feel black ink only as a default?

  I don't know if it will work, I do not use this parameter or the Advanced setting, I have been using high-quality grayscale, but I'm interested to know why, also, when I print 99.9% of the time with color, what I need to change the color ink cartridges so frequently.  You say the color of those who are used to make black.  That makes no sense to me either why the printer would do that, except high-quality grayscale means he uses color inks vs only Black Ink is not.

  Test printed with two parameters, and that is exactly the same, so I won't set my default preferences for levels of gray-black ink only printing and see what happens.

  What how can you tell whether or not the printer is mix colors?  (by the way, if you use unusually fast color ink)

• HP photosmart 5515 all-in-one: HP5515 all-in-one black ink will not print

  I'm having the same problem that other messages that I have seen posted - my black ink will not print

  Help!

  You can try to unlock the black cartridge using a cotton swab soaked in hot water.

  Turn the printer off by removing the power cable.

  Remove the black cartridge & you we see a wire mesh DAB gently with the Q-Tip.

  A cleanup operation between attempts.

• HP Deskjet 1050 J410 Printer series with windows 7 - installation problem?

  Good evening
  I just bought a new printer HP Deskjet 1050 J410 series with windows 7. I installed it... with many problems... whenever it is said that the driver could not be found... but in the end, it is installed. The scanner works fine. While the printer is blocked... When I clicked on the resolution of problems, the message I got was:
  HP Deskjet 1050 J410 series doesn't have a driver.
   
  I uninstalled and reinstalled 3 times and the same problem persists. I don't understand what that means. Should I please?
  Thank you very much for the help!

  Make sure you have the latest and correct the driver for your operating system.

  HP Deskjet 1050 All - in - One Printer series - J410

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=4027462&prodTypeId=18972

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• HP Deskjet 1050 J410 printer is not compatible with windows 8?

  Hi, I just bought the HP Deskjet 1050 J410 series printer. When I try and run the cd on my windows laptop 8 it comes back with a message saying "your OS system is not compatible with the series hp deskjet 1050 J410." I was wondering if you could help me with this? Thank you

  Hello dhwany,

  Download the driver on the web.  You can follow the instructions to install here.

  Please let me know if this helps solve your problem.

  Good luck!