DeskJet 1510: cannot load the ink cartridges Deskjet 1510

I can't not ink cartridges fit or stay when I try to install.  They have to be pushed very strongly or in a corner or something?  They will stay in.

Hello

Follow these steps to replace an ink cartridge for your printer, this item will include pictures and video:

http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/model/5157552/document/c03773247/

Be sure to insert the black cartridge in the right host and the Tri-color in the left.

Shlomi

Tags: HP Printers

Similar Questions

  • How can I load the ink cartridges

    I have TouchSmart series D110 printer that uses 60 ink cartridges and I have Windows 7 on my computer and I need to know how to load the cartridges!   I can't believe the instructions are not in or on the packaging!  ????????????

    Hello

    It should come with the CD, or you can look at the #19 of this manual page.

    http://h10032.www1.HP.com/CTG/manual/c02106007.PDF

    Kind regards.

  • cannot replace the print cartridges CP1025nw

    I am trying to replace the print on my HP LaserJet CP1025nw cartridges.  I did several times.  But this time, I can not cartridges suitable for turning in place.  I press any button to specify which cartridge I want to replace, only yellow appears!  I tried switching the printer on and out on, and that did not help.  I really need to replace black, but cannot figure out how.  Any ideas?

    Hi @annie89 ,

    I see that you have problems with the carousel doesn't turn only not to be able to change the black toner. I would like to help you today.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    You can manually move the carousel, by releasing the locking mechanism. Use something to push it.  Manually, back off the carousel, do not touch the toner however. I have also provided a picture where there are in fact two areas to leave, they are circled in red. The left side is easier to move.

    Cannot remove the ink cartridges.

    If the problem persists, I would like to do a hard reset.
    Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
    This ensures that the printer is full on and can help this situation.

    If you need help, let me know.

    Have a great day!
    Thank you.

  • My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

    My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

    Hello! Welcome to the community @Tammy111 HP

    I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

    HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

    Click on the thumb to below testify my help!

    Click on the "accept as Solution" if I'm you guide to a solution!

    Contact HP:

    Step 1. Open the link: www.hp.com/contacthp/

    Step 2. Enter the product number or select Auto detection

    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

    Step 4. Scroll down and click on: contact HP options - click Get phone number

    File number and phone number appear

  • When traveling in a car, what care should be taken with the ink cartridges

    Win XP

    HP deskjet 1000 j110

    When I take this printer on a road trip (700-1000 miles), should I remove the ink cartridges (type 61)?

    No, the cartridges should be left in the printer.  For best results keep the printer out of direct sunlight and avoid large temperature extremes as much as possible.  Also keep the printer in a standing position, avoid turning on the side or end.

  • My Epson Stylus 610 says to replace the ink cartridges, but I just put in new cartridges Epson

    My Epson Stylus 610 said to replace the ink cartridges, but I had just put in the new Epson cartridges.

    I have it reset, and I tried to clean up the area, but still the same message and cannot work around.

    My drivers are supposed to be updated.

    I can't print anything.

    [Moved from the community centre of Participation]

    Hello

    Welcome to the Microsoft community.

    What operating system is installed on the computer?

    You may need to check if you have followed the actual procedure to change the ink cartridges.

    Please see the following article:

    https://files.support.Epson.com/htmldocs/sc60__/sc60__rf/ink_1.htm

    https://files.support.Epson.com/htmldocs/pho22_/pho22_rf/ink_1.htm

    Kind regards

  • I can't go to my printer. It will not recognize the ink cartridges are full!

    My epson 7400 has not been used for 6 months. I cleaned and aligned the nozzles and it used 2 full cartridges. I installed new ink cartridges, and he says they are empty. Now none of the buttons work, it does not seem to recognize all commands. What should I do?

    Hello

    Turn the printer off

    Unplug the printer from the computer and the wall outlet

    Reinstall the cartridges

    Support all the ink cartridges until they snap into place to make sure that they are well housed

    Close the cartridge cover and push it down until it snaps

    Close the scanner

    Press on the Stop button to start loading of ink. It takes about 2 minutes.

    When the the light stops flashing and remains on, the ink load is complete

    Caution:

    Never turn off the Epson Stylus CX while ink is in charge or you'll be wasting ink.

    If the ink light flashes, press on the Stop button and lower all the cartridges safely

    Manually clean the print heads

    Plug the printer into the wall outlet and the computer.  Turn it on and try printing again.

    Updates

  • Equium - Windows cannot load the device driver for USB dongle

    I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    -what it means and how can I solve this problem?

    Hi Ozcat,

    What USB dongle is that exactly?
    What cell phone do you have?
    What operating system is installed?
    Have you already tried to reinstall the driver for USB dongle?

  • HP ENVY 5646: Replacement of the ink cartridges

    Hi - I have the all-in-one printer from HP ENVY 5646 and endorsed the Plan of instant ink Hp.

    I just run out of the "no Flash" color ink cartridge (ink cartridge black 'no snapshot' is about half full)-both "no snapshots" cartridges supplied with the printer.

    So - I replaced the color ink cartridge is 'no snapshot' with the color cartridge instant I received a few weeks ago, when I signed up for the instant the ink plan, my question is: should I also replace the ink cartridge 'snapshot not' black now with the black cartridge of instant or wait until it is empty?  Is it true that I should replace the black cartridge and color at the same time whenever one runs out of ink?

    Thank you very much for your reply - much appreciated.

  • Satellite A30: Error number (11122) cannot load the bitmap with recovery CD

    I have a Toshiba A30 I want to reformat with the recovery disk. I get that day then I get an error that reads:

    The error number (11122) cannot load the bitmap file. Height max = 100

    The hard drive has now been deleted and I can't sent this message to reformat.

    Can someone help me on this please.

    Hello

    Satellite A30 is quite old and I wonder what report you something like this after so long. I put t know exactly what is happening, but it will be interesting to know a few things:

    Have you noticed a similar problem before?
    Are you using the original disk or some copy?
    Is there a problem with the HARD drive?

    Please do a little bit more about these things.

  • Intel Pro/Wireless 3945ABG cannot load the driver

    Wireless worked fine since I bought this laptop

    Now it has stopped working and has a yellow exclamation mark in Device Manager - it says "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    So I uninstalled the device and check the box that says "Remove the driver for this device", then reinstalled the latest version of the driver on the Toshiba site 11.5.0.32.

    Windows Vista detects new hardware and install the driver, but fails with 'Windows found driver software for your device but encountered an error trying to install it. The system cannot find the file specified. "

    All ideas

    Remove the wireless network adapter in the device, download manager driver the latest from Intel page and repeat the procedure of installation of the driver.

    Good luck

  • Satellite A200 - cannot load the keyboard and touchpad drivers

    Hello

    I have SATELLITE A200-10W, HOME PREMIUM installed with SP1. I use it more than a year. All of a sudden it happened that my laptop stop responding and then I rebooted.
    My touchpad and keyboard stop working, but I connect as a user of the window through KEYBOARD to the SCREEN.
    In Device Manager I CAUTION icon on the keyboard and inside, it says under DEVICE STATUS which

    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (CODE 39). »

    i8042prt.sys and kbdclass.sys files are attached as a driver in detail.

    My keyboard works during BIOS and even when I boot with the CD bootable operating system WINPE, my keyboard is not working, even typing everything inside this environment, but not in the normal window.

    I tired restore my laptop
    LAST GOOD CONFIGURATION
    Apply unsigned drivers
    Safe MODE (does not work yet)

    Downloaded some software like driver detected etc, but... NO RESULTS.

    I don't want to go for WINDOW RECOVERY CD for OS to re - install
    I have a large number of parameters, I don't want to erase...

    IS THERE A SOLUTION FOR IT?

    My warranty ended already after one year

    pls help and answer...

    That s a great info. Thanks for the clarification!

    Good bye

  • How do we install the ink cartridge hp officejet pro 8600 Premium?

    Not having is not an easy time to the top of my printer setting.  I don't see where the ink cartridges go.  I opened the front; but I do not see where or how the games of the ink in the printer.  According to me, Miss me something.  Someone can help me.  Thank you

    @LJoR

    Here is a video that will help you with the installation of the cartridges.
    http://goo.GL/zoVsc

  • I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

    My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    Is anyone know how can I access my hard drive again?

    Thank you

    Hello

    You has made changes to the system before the error appearing?  Cancel the changes.

    (1) in Device Manager > right click on the driver, and then select uninstall

    Reboot and Windows will reload the driver

    (2) remove the upper & lower filters that cause errors in Code 31

    http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

    Access the manufacturer's Web site and search for updated driver

  • e all in a single photosmart 6520: 6520 implemented of the ink cartridges

    Hello I recently had a new photosmart printer of hp 6520.  However the implementation of the ink cartridges were not in the box.  I was wondering if there was a way around it or if I would be able to get a new set of these cartridges in order to set up the printer so we can use it.   I registered and installed all the software.  the only thing I don't have is the cartridges of configuration to use it.   Thank you for your time

    Hello! Welcome to the @jbuckley21 forums

    I read your post on how your 6520 Photosmart did not include cartridges Setup. In this case, you will need to contact HP for the Setup cartridges sent to you, to install the printer.

    Please, give us a call:

    Call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

Maybe you are looking for

  • Safari running too slow on OSX El Capitan 10.11.4

    Hello After upgrading OS X version 10.11.4, Safari is too slow, sometimes it causes all the other program offbeat and prevented from 10 to 30 seconds. Someone had the same problem I have?

  • Import of iMessage for iPhone

    Recently, my iPhone crashed and needed to be restored, but I do not have a recent backup (my fault I know).  I am looking for a way to copy/import the database of iMessage since my Mac (OS X) in my iPhone if I have the iMessage history/attachments on

  • NETGEAR genius too small

    Have been using and loving genius with my home network. Just bought a Dell XPS 13 laptop. Installed the genius. He appears in the center of the screen, but it's tiny. It's 2 inches square on a screen of inh 13 and the text is too small to be easily r

  • Recover Backed up Files of Robocopy

    I'm kinda new to use Robocopy.  I gave to my new job to recover some files that are located on a server using robocopy and Task Scheduler to run backups.  One of the computers on the network was achieved by the Cryptolocker virus so it costed one of

  • where can I buy more ram to my computer

    I need more ram. where can I get it?