DeskJet 1510: DeskJet 1510 broken tray loader

My mother bought a DeskJet 1510 printer/scanner, but when we went to sett the printer paper feed tray at the back, we noticed that one of the clips that hold on to the printer with was broken.  We tried to tape, but it wouldn't do any good about feeding paper into the printer from the status bar.  HP makes the repairs or replacements. or we should return the printer whenever we bought it?

Already done. Thank you.

Tags: HP Printers

Similar Questions

  • have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

    have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

    Hello

    Please contact the Microsoft community. We will be happy to help you with your concern.

    According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

    How do you try to install the driver? Is it through the disc or via the site?

    Method 1: Use a troubleshooting tool to solve the problem:

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: temporarily Disable the Antivirus and firewall and try to install

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3: Try to install in the clean boot

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

    Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

  • Is iMac G3 tray loading and loading RAM Compatible slot?

    I have two iMac G3. One is a load 333mH plate and the other is a slot loading 400mH. Could I take the RAM since the charger of the tray and put it in my charger slot? Tray loading iMac has more RAM in it, and since I just got the charger under OS X Tiger and need all the RAM, I can get.

    Thanks in advance!

    Yes, they are the same.

  • HP Deskjet 1510: Empty tray and the paper jam

    When I try to print, I get message empty paper tray. I take the paper tray and put again, and then I get the paper jam when I try to print again. My printer worked fine od days. This happened for no apparent reason.

    Hello and welcome to the community of HP @R-Tuck,

    I understand that you still receive error messages paper jam on your HP Deskjet 1510. I'll be happy to help you.

    Here is a link to a document offering solutions to troubleshooting to jam on the HP Deskjet 1510 questions. Try the steps and let me know the results.

    The flashes (paper jam) Attention for printer HP Deskjet 1510 and HP Deskjet Ink Advantage 1510 all-in-One Printer Series

    If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

    I hope this helps and have a nice day.

  • HP deskjet 6122 could not load the driver on the CD, he says is no longer supported

    Original title: printer HP Printer driver

    I have an old printer of HP deskjet 6122.  It works very well.

    However, when I plugged in a new desktop computer, I could not load the driver for the CD.  He said that it is more compatible.

    Later, I learned that the driver for HP 990 will work as a substitute.

    When I go to the HP site, there is no help as it attempts to identify my printer before you download the driver.  It identifies my printer 6122 as obsolete and will not load the driver down 6122 or 990.

    Where can I go to download the HP 990 regardless of HP driver?

    It's the HP 990c driver you want?

    If so have you tried selecting the update of Windows while in the Add Printer Wizard?

    It will take more than 5 minutes to get an updated list of printers and the 990c is.

    You can get them here too:

    Drivers HP for Windows update

  • Cannot eject the CD from the drive slot (without tray) load

    I have a Dell Insiron, which took a drive die on me and I'm now trying to reformat and reinstall Windows. The system currently has no BONES.

    The problem is that the slot loading CD / DVD player has eaten my DVD and don't restore it to him.

    1. start the machine

    2. press on the eject button on the top of the keyboard

    3 lecteur_CD whirs and clicks on and then guard spinning for about 15 seconds and then stops turning

    This player does not have a shelf as other CD players, it's just a load of housing where put you the CD directly into the machine. And I can't find a paperclip hole to try to eject manually.

    So now I can't reformat because I can't get my DVD out!

    Thanks in advance for any advice!

    The machine is a Dell Inspiron 1318.

    There is still usually emergency eject hole or button - usually at the rear of the drive.  To look for, you will need to remove the drive from the system.

    ADMIN NOTE: broken link has been removed from this post by Dell >

  • HP5730 of ink tray loader cartridge nothing like it in the photos/manuals

    Therefore the 350 and 351 ink cartridges are not accepted by the drawer cartridge slide mechanism.  Documentation shows images with the handles of charger for cartridges * top * of the mechanism. Furthermore the images show springs to keep the cartridges in place while the charger is working.

    The mechanism in my machine has no springs; the handful of loading of the ink cartridges is at the bottom of the tray. The status bar will not accept the cartridges supplied in the box.

    I have to explain this machine was purchased maybe Staples here five years ago in the United Kingdom, but remained in its box unopened so far since my old HP continued to work OK.

    I really want to know who to contact about this problem.

    "Brownie" given points. I would replace printer in its box (on his side UM) to wait for your answer. Deleting printer review revealed the charger missing to the left of the print carriage and not immediately apparent part. Case solved.

  • Broken tray flap letter on Officejet Pro printer

    Is there anywhere to buy a spare part for the Officejet Pro 8600? I checked the list of replaceable parts of HP for this printer and can't see the part I need.  It is a plastic piece that comes out and stops the book fly away when the book comes out of the printer. It has a flap that you can return to the top, to stop the paper and hold it in place once its print, or you can the flap down. It broke and you don't know where to get a replacement.

    It's called the output tray.

  • Broken yellow load USB X 220

    Hello

    I stumbled and accidentally yanked on my 900 Lumia was charging in my X 220, who broke the little yellow tongue and four metal teeth (I guess that's what we call them) inside the yellow USB port. It is completely broken.

    Anyone know where I can buy a replacement and how difficult is it to replace?

    I miss my usb port yellow as a cowboy miss his finger spring ;(

    Thank you

    presque_vu wrote:

    Planar = in simple terms?

    Is talk of IBM (now Lenovo talk) for motherboad. I'm sorry.

    Uh, I was hoping that I could just buy an another yellow usb, follow the manual 220 X and replace the whole part. Mind you I have not watched the instruction manual yet.

    Unfortunately, it is not as simple as that. USB connectors are soldered to the motherboard. You need expensive equipment and trained technicians to replace these parts without further damaging the motherboard in the process.

    You have three options:

    1. find a repair center local circuit board to do the job.

    2. living without the USB port.

    3 replace the mother/Planar.

  • DeskJet 3511: scan legal size

    Is it possible to scan documents of legal size since my Deskjet 3511 paper tray?  If so, how?

    Hello

    According to the specifications of the printer this printer does not support the legal size

    http://support.HP.com/us-en/document/c03353033

    hope this helps

  • iMac G3 tray charger stuck on the gray screen with question mark flashing folder

    I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark. Not only it does not maintain the keys C or Option, but it will not start up any combination of keys, such as resetting the PRAM or the NVRAM. It just starts and stays on the screen with the flashing folder does nothing. It CAN read the keyboard, because I can turn on the computer with the keyboard, it just won't start to the top of any disk or any combination of keys. Any ideas on what could be the problem? I just replaced the hard drive, but it was the same before I replaced the hard drive as well. In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

    I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark.

    Valid operation system not found.

    Not only it primer not leave now pressed the C or

    Place the cd in the drive.  power off.  Hold c power key on & while in the startup is underway.

    Keys options,

    key option is not supported on tray loading imac g3 333

    In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

    It took charger slot, but I think that optional for the bin.  I think that you can upgrade the firmware with 8.6 for trays.

    You may need to reset the PRAM and NVRAM and Mac's Open Firmware. Stop the Mac, then it turns on and before the screen lights up, quickly down the command, Option, P, and R keys, until the Mac rang twice more after the power to chime.

    Then, before that lights up the screen, hold down the command-Option-O-F until the Open Firmware appears. Then enter these lines, and then press return after each of them:

    Reset-nvram

    Configure default

    Reset-all

    "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings. »

    http://support.Apple.com/kb/TS1812?viewlocale=en_US

    In the case of the...

    Try taking the battery for 10 minutes.  Put back in the battery.  Fingers crossed. Turn the machine back on.

    How do I eject the cd from the internal drive:

    eject the cd

    List of devices:

    devalias

    List of variables:

    printenv

  • Defects of printer driver

    My HP Compaq dx2400 microtour keeps telling me that the drivers for my printer HP Deskjet F4580 are not loaded and cannot be found?  I removed the printer and download the full suite for the printer, twice, but I have the same problem...  The printer is working and I can't find a fault?

    What's wrong??

    Hello muskrat,

    I'm sorry to hear about the message that you receive by saying that your drivers for your Deskjet F4580 is not found. I see you have uninstalled and reinstalled the full featured driver and software and encounter the same problem. I would like to help. I suggest a number of things.

    1. Save and run - print HP and Scan Doctor

    2. check the updates from HP

    I hope this helps!

  • Since the last Microsoft updates, download HP printer no longer works.

    Original title: may not print on hp deskjet F4180 after shot, loading of the latest updates from microsoft.  Download driver hp several times.  Microsoft's response is did not recognize the hp logo.

    Can not print on Hp DESKJET F4180, after shot update microsoft, microsoft message is can varify LOGO.  Printer works when I print from my laptop, but not the destop.

    Hello

    1. What is the exact error message that you receive?
    2 have. the updates you installed?

    You can check the number of the update in the update history:

    1. click on Start, click all programsand then click Windows Update or Microsoft Update.
    2. on the Windows Update Web site or the Microsoft Update Web site, click view update history.

    The following article might help: printer in Windows problems

  • 5650 and Mac OS 10.5.8

    Don't use much my printer and just noticed today that I can change is more preferences after installing Leopard.

    I get the message hp deskjet EDP cannot be loaded because it does not contain a version for the current architecture.

    Sought a software on the site update but nothing again.

    Thank you...

    Downloaded 3.3 base driver and that did the trick.  All the features work again.  The one who rode in system preferences was 2.7.1.
  • HP ENVY 17-R102NL: dvd burner double layer HP ENVY 17-R102NL

    Hello

    I would like to know what kind of burner is installed in HP ENVY 17 - R102NL laptop computer?

    What is the burner model number?

    It is a DVD burner double layer RW-/ + or not? or another type?

    Thank you

    From the Manual:

    Fixed optical drive, Series SATA, DVD +/-RW Double layer SuperMulti Supports zero power optical drive Supports M-drive 9.5 mm tray loading

    Optical drive DVD +/-RW Double layer SuperMulti 813784-001

    So yes, it will read and burn supports double layer.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Maybe you are looking for

  • Use of severe battery after iOs 10.0.2

    Hello. I have an iPhone 6 since January this year. updated to iOS 10 the same day that it was released. and updated to 10.0.2 yesterday evening (less than 24 hours ago). After 10.0.2, for the first time since I bought the iPhone, I went to sleep with

  • eliminate the history of unwanted contacts when writing emails

    When you compose an email, and I type in the first letter or two of the recipient, a story rises and contains undesired, incorrect or unwanted e-mail addresses that are NOT in my address book. How to clean to the top so that the contacts you want app

  • Unable to properly use the tumblr dashboard?

    Up to wake up this morning, I was able to use fully the tumblr and the dashboard correctly. Unfortunately this is no longer the case. When I go on tumblr, I encounter a plethora of problems that make using it almost impossible. On the dashboard and t

  • Corrupt BIOS HP Pavilion DV6-6c51sa

    When I try to boot my laptop it just at a black screen and dosent boot up properly. After about a minute of waiting the caps lock light starts to blink in a cycle of two flashes, which is as I'm lead to believe there is a corruption of the BIOS. I tr

  • How can I restore my docs, photos and music to back up an external hard drive?

    I had to reset my Dell Dimension E521 to factory settings.  Before I did, I copied all my files, photos and music on a portable hard drive Western Digital.  How can I get my files, photo and music restored to my PC?  I tried to copy it to the PC, but