DeskJet 2050 j510 a series cannot scan

Similar Questions

• New series HP Deskjet 2050 J510 "paper jam" will not be printed

  HP Deskjet 2050 J510 series

  I bought this about a month ago. I can always get to print (although it will scan)

  He repeated to me that there is a paper jam when there is no!

  I'm at my wit's end.  I tried everything, except back to the store and throw it on them!

  Life wasn't supposed to be this hard!

  Any fix suggedted?

  Hi michaelangelica

  Try following the steps described in this document

  It works?

  Ciara

• Connection problem series HP Deskjet 2050 J510

  I'm sure I have connected my ph printer on my laptop but I can't scan, or print.  The screen has said, "The HP Deskjet 2050 J510 series was not found"

  The last time it happened I uninstalled and installed again and then it worked.  Now after a few days he did not again.

  He could have a bad connection with the USB cable. You have another one to share?

  Seems to lose the connection after a certain time. USB cable may be the cause. Alternatively, you can try to plug it into another port on the computer.

• How can I make several outputs scanned in a single folder? DeskJet 2050 J510

  DeskJet 2050 - J510

  Windows 7

  At present, each image that I scan appears in a separate folder.  It's a nuisance for the mutiple image scans.  How can I make all the images in one session are displayed in the same fiolde, preferably on my desk?

  Hello kayecy

  Lets try to reinstall the software. Please follow the instructions below.

  1. open Control Panel
  2. click on uninstall a program
  3 uninstall the Deskjet 2050 in the list
  4 restart your computer
  5. download and install the latest version of Adobe flash player
   http://get.Adobe.com/flashplayer/
  6 download the drivers and full software functionality, and then reinstall the printer.

  Complete software Deskjet 2050 features

  Let me know if something changes or if the same interface of shows.

• Impossible to uninstall HP Deskjet 2050, error: C:\Program HP HP Deskjet 2050 J510 series\bin\HPStatusBL.dll

  Original title: when I uninstall the driver and software for HP Deskjet 2050 I get an error message

  When I uninstall the driver and software for HP Deskjet 2050, I get an error message when I start my computer after starting the error message is:

  RunDLL

  There was a problem starting C:\Program HP HP Deskjet 2050 J510 series\bin\HPStatusBL.dll

  The specified module could not be found.

  My computer is:

  Edition of Windows: Windows 7 Professional 64-bit with Service Pack 1

  Brand: Acer

  Model: TravelMate P645-MG

  Intel Core i5-4200U CPU @ 1.60 GHz 2.30 GHz processor

  RAM: 4.00 GB (3.89 GB usable)

  Hello Nathaniel,

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to inform you that HPStatusBL.dll is a type of DLL file associated with HP Digital Imaging developed by Print Driver status logic for the Windows operating system.

  This error could be related to issues in the Windows registry. Broken DLL file references can prevent your DLL to register correctly, file giving you a HPStatusBL.dll error or if the product is not uninstalled successfully.

  You can try these methods below and check that helps:

  Method 1: Uninstall programs and features.

  1. By clicking on the Start button, open programs and features .
  2. Click Control Panel in the right-hand menu.
  3. Click programs.
  4. Click programs and features.
  5. Locate the program HPStatusBL.dll - related (for example. HP Digital Imaging) under the name column.
  6. Click on the entry for HP Digital Imaging.
  7. Click the Uninstall button in the Ribbon to the top menu.

  Follow the on-screen instructions to finish uninstalling your program associated with HPStatusBL.dll.

  Method 2: Remove printers from Device Manager.

  Remove printers and uninstall Windows print drivers using printers and Windows devices.
  1. If your printer connects to the computer with a USB cable, disconnect the cable from the printer.
  2. Turn the printer off and then on again once and make sure it is in a ready state.
  3. Search for Windows devices and then click on devices and printers in the list of results.
  4. Right click on the printer icon () for your printer, then click on remove device. Follow the on-screen instructions to complete the process.
  5. If multiple icons are available for the printer, delete them all.

  You can also check:

  http://support.HP.com/us-en/document/c02259020

  If the problem persists, follow method 3.

  Method 3:

  Follow the steps in the given link:

  http://h30434.www3.HP.com/T5/other-printing-questions/need-help-to-completely-uninstall-HP-drivers-amp-software-FM/TD-p/498183

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• HP deskjet 2050 j510 series: incompactable ink

  I stopped using the printer for 2012 and now I've replaced the ink cartridges (122) and he began incompactable cartridge statement. I bought this printer in nigeria when I installed the printer software, that I downloaded from the hp site, country option only has not only usa nigeria. Please I need help with this I don't know what to do.

  Hi @danny8,

  Welcome to the HP Forums!

  I see that you have found the message with your printer HP Deskjet 2050 j510 incompatible ink cartridge. I'm happy to help you!

  Please contact HP, support for further assistance, to have the printer regionalized for your telephone area. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Best regards!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP Deskjet 2050 J510 - paper tray is full but keep the message that the tray is empty.

  HP Deskjet 2050 J510, Windows XP - new printer - error message paper tray is empty, but the tray is full.

  Looks like paper error output is to come. This is normally caused by dirty rollers. The document below will give you steps to solve the problem. If this does not work, try to do a hard reset. If is not running, you will need to replace the printer.

  "Out of paper" Error Message and the printer is not looking upwards or the paper feed:
  http://goo.GL/hVD48

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• successful installation of the United Nations to the pilot for All_in_one Deskjet 2050 j510 series

  «While I want to install the software (downloaded) driver for my printer "All_in_one Desskjet 2050 j510 series, I came across a window asking " printer information'.»» In this window, there is a field "confirm your location ', there I could not find any provision to select my country (India) & below that there is a field asking to enter the " POSTCODE:... ' "" ", I don't know what to enter... Please help me continue my steps of installation...

  Hi Aswathi_C,

  Please check your message box located at the top right of the window directly to the right of the where it says "Log Out".

• DeskJet 2050 J510 series allow more than 1 page to analyze

  I used to be able to analyze as many pages of a PDF I wanted. I usually just an update of HP suggests, I don't know when the last of them was, or if it is a factor. Any help would be greatly appreciated.

  Hello! Welcome to the @FrustratedLobo forums.

  I read about how you can no longer scan multiple pages with your Deskjet 2050 printer and I want to offer my suggestions.

  Click this link to get the drivers and software download page, select your operating system and select "driver" and download the full feature software and driver. Once the download is complete, run through the installation to install all the features of your printer. You should have the options at the time where the installation is done. :

  HP Deskjet 2050 all-in-One Printer - J510a drivers

  If there is still problems with scanning, answer with your operating system and error you see!

  I will do my best to help

  Have a great Tuesday

• DeskJet 2050 J510 - Scan and printserver

  Hello!

  I can't use the scan function, if I connect to my printer via a shared printer on my other PC.

  Can I use the function of scan on all computers in the network if the printer is connected to a print server?

  All PC using Windows 7 64 bit.

  As the name suggests "print server, it can only be used for printing when the printer is shared. Scanning is not possible because this HP Deskjet 2050 printer does not support network. It is for the USB connection only.

• 2050 J510: a HP Deskjet 2050 J510 can be ussed wireless

  This printer can be used with wireless? If yes how? I installed the drivers and did the wireless Assistant but it still does not work. I'm trying to do it on a laptop. It prints when connected via USB.

  Hello

  Thank you for using the forum.

  Based on the info from this link:

  http://support.HP.com/us-en/product/HP-DeskJet-2050-all-in-one-printer-series-J510/4027463/document/c02063036/

  It does not support wireless.

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Feature of printer HP Deskjet 2050 J510 estimated ink level

  Does anyone know why the shortcut of printer HP Deskjet 2050 has more estimated ink level functionality?  That is until 05/12/12, and now the entire window has changed. "Now it has only the options to 'See whats printing' and 'Customize your printer' Set preferences.  I can't find any reference to the updates that may have changed, so I have no restore points.  The only thing that has changed recently is the new version of the HP Support Assistant.  This would have an effect on the printer software?

  Problem solved by downloading lasted driver according to the instructions.

• Deskjet 2050 j510 printing problem

  print only a part of the impression and the text is surprisingly large

  Hi 69nom,

  Thanks for the reply!

  Since it is only the Excel that seems to have the problem, I suggest that you try to add another driver. To do this please follow all of the steps below:

  1. go into your control panel, and then printers and faxes.

  2. on the left, under printing tasks, click Add a printer, and then click Next on the Welcome screen.

  3. Select Local printer attached to this computer, and then Next.

  4. from the drop-down list, select the port using the Deskjet 2050, and then click Next.

  5. under manufacturer make you you select HP. Under printers find the hp deskjet 990c printer and then click Next.

  6. you can change the name of the printer or leave it as is, the decision is yours. You can do this by default if you wish. If you do just that you don't forget to select instead of the Deskjet 2050 when you print from Excel. Be sure to click Next when finished.

  7. not to share the printer, unless you need to share, and then click Next.

  8. say yes to print the Test Page to make sure everything worked, and then click Next, followed by finish.

  Once this is done, please try to print from Excel using the Deskjet 990c printer driver and let me know how it goes!

• HP deskjet 2050 J510 series: Deskjet 2050 scan icons not opening

  I use windows 7 and until recently could open the printer and the HP support Assistant using the icons on the desktop. Now when I clicked on the icon of the printer that is used to open in Notepad, but now it wont open at all and support assistant says it has stopped working and the error message indicates that windows will close and that it is seeking a solution siutable.

  Please someone offer some kind of advice on how to recover the two icons back to the normal conditions of use.

  Hi 715647 ,

  Thanks for responding!

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Please let me know how it goes!

• HP Deskjet 2050 J510: Continuous scanning

  With the help of W7, Firefox 35.

  For some reason I cannot now continue with a scanning operation ending up with all pages in one group. Now, they must be analyzed individually.

  How is it possible for me to get the routine of scanning a page, removing, going back and place the page on the scanner, until the work is completed?

  Thanks for any help.

  Colin.

  colinX,

  When you click the scan option, please select the Document in the file option, then when you return to the advanced settings, you can uncheck the box for save each analysis in a separate file. See below: