DeskJet 3050 a, offline cd labels

Similar Questions

• My deskjet 3050 exploded online, and I can't print.

  My Deskjet 3050 went offline and I tried to connect wireless and it won't.  It will not be printed.

  Print a network Test Wireless at the front of the printer.  Is it connected to your wireless network?

  What operating system?  What router?

• Example: Deskjet 3050 - J610: printer removes items in the print queue

  Please see problem posted on June 9, 2016 and thread support. Sorry, I don't know how to go on this subject but the problem that I've marked as being solved is no longer is. It it is possible to mark as resolved and to reopen the thread please let me know how and I would be glade to do. Essentially sent items to the queue printing are deleted until they can print. They show in the print queue and then are marked "delete." I ran Print ahd doctor Scan of my desktop PC, and he says that everything is OK with the printer. I can see what the ink levels in the printer, and it printed on the printer succcessfully diagnostic information when asked to do so. I can see all of the information on the model of the printer, the serial number etc. so it seems that the PC can see the printer. But it will not print emails or Word documents - while he has done it before. Problem seems to have started when I tried to scan a document in and it would not. Printer is connected wireless and has an IP address, it doesn't seem to be the firewall attached - I disabled the Anti Virus software and it will not print. It runs the Windows firewall good that cause issues? I disabled that too, but it did not help. I followed the intstructions given by Gemini02 a HP Support Agent and it seemed to solve the problem but it only did it once and then continued to remove items from the print queue. I also tried to turn off the printer and then the PC, left for a while and then restarted them and that seemed to work. He already showed the printer as offline and printing and scanning doctor fixed that but when I ran it but still it only printed once and then returned to the deletion of items in the print queue. Grateful for any advice anyone can offer please.

  Hi @Moonfire24,

  Welcome to the HP Forums!

  I saw your posts on how your HP Deskjet 3050 - J610 printer keeps deleting items in the queue in Windows Vista. And I'm happy to help you!

  Please try the steps in this guide, Print Jobs stuck in the queue (Windows), let me know what happens! (Even if the title of the guide may not correspond to your question, I think that the solutions will help.)

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  Hope this guide helps!

• HP deskjet 3050... new toner cartridge (61) seems to cause gobbeldy-* beep * printing

  Hello.  Mark here.

  HP deskjet 3050, black cartridge 61, Windows XP.

  Recently replaced my black cartridge on receipt of notice system that the ink was low.  Installed new cartridge, print alignment page alignment page scanned.  Now, the printer prints the correct image or text but has a lot of 'jump' and 'holiday' until the result is barely readable.  New cartridge was form Best Buy purchsed and door label HP so I think that it is authentic.

  Tried to uninstall and reinstall the new cartridge to no effect.  Even will not grant me a new alignment page.  In my view, a new alignment process would be the next step to try, but I can't force the system to allow this.

  Thanks in advance for your suggestions.

  Thanks to everyone who responded to my question with the printer cartridge.  After several attempts to solve the problem with your excellent suggestions, I broke down and installed a new cartridge.  Problem solved.  Apparently, I had a bad cartridge from Best Buy, where I buy all my stuff like that.  Because I don't have a receipt for this item for $20, I don't then take it back to Best Buy, but I certainly will ship the bad cartridge HP with a note.  I'm certainly not angry or disuaded from HP - I found their stuff as fairly reliable over the years.

• HP Deskjet 3050 J610 - error

  Printer has worked for a while and stopped working a few days ago.

  In the queue, I get an 'error' as the status

  I uninstalled the software countless times. installed from disk and downloaded the latest driver for my computer (macpro, OS X 10.6.8).)

  Also the switch cables & cartridges & it still does not work.

  Now when I open the HP utility, I get a message telling me that my computer components have been developed for another version & some features will not be usable. Then he told me to download the latest version of what I did several times. I had 3 HP printers connected tpo this computer 6 months & now none of them work, so I uninstalled all the software for all of them & focused on trying to get just the HP Deskjet 3050 J610 to work.

  I did Test the HP utility, which tells me that if it prints OK that the fault is the drivers or printing from my computer system. It does not print OK, and here, the solution is to install the latest drivers, which, once, I've done several times.

  Anyone else having this kind of problem? Or have any idea of what I need to do?

  Thank you.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with the 10.6/10.7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Download and install this: http://support.apple.com/kb/DL907

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Finally, download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

• HP deskjet 3050 a: hp deskjet 3050 has 0xb04021a6 error codes

  At the error code 0xb04021a6 on the screen of the printer at the time wherever you turn it on.

  Have research all day but unable to know what means this error code.

  Hi @e-year-e.

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a HP Deskjet 3050 has e-all-in-one printer showing an error code "0xb04021a6" when he is running. I would like to help.

  These error codes are caused by hardware or firmware issues.

  "Here is the document of suppiort designed to be used with this problem - ' 0xc19a0005" or similar error.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Series Deskjet 3050: test printing sheet but only blank sheets come out otherwise, also can not copy to printer.

  Has made no recent changes outside the update for Windws 10.

  OK, thanks for that.

  Here is the link for the drivers and software for your printer page: http://support.hp.com/us-en/drivers/selfservice/hp-deskjet-3050-all-in-one-printer-series-j610/4066450/model/4066451#Z7_3054ICK0K8UDA0AQC11TA930C7

  If that doesn't show Windows 10 when you open it, and then click change and select Windows 10 in the menu drop-down.

  The drivers, you need to download are full feature software and drivers.

  Remove all the existing drivers and the software of the printer.

  Install the new software of HP but have the printer unplugged and it do not connect until the installation program invited to do so.

  After the installation is done and you reboot, you should be able to use your printer without problem.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HPJ610a Deskjet 3050: Join the network wifi through router new Deskjet 3050 HPJ610a

  I moved into an area of network connected to fiber (NBN Australia) and installed a new router D-Link DIR - 850L.  I was unable to connect to the router using WPS.  I had to buy a HP Envy, which connected wtihout difficulty.  I just upgraded my router to a TP - Link Archer C9, with a richer control interface, so I tried again to connect my Deskjet 3050.  Once again, no luck.

  I read a number of posts about this, and they all back down to the re-use of your installation of the printer software.  The problem is that the software driver for OS X El Capitan comes from Apple and is already up-to-date. I am able to run the printer when it is connected by a USB cable, so if I could work out how to emulate an installation, I might be able to get connected.  Is it possible to do this?

  Hello

  Sorry for jumping in, but the steps in Mac OS X are in fact incorrect.

  In System Preferences, select Printers and scanners.

  Double-click the listed USB printer, and then select the printer settings / Options.

  Open the Utilitiy tab, and then click Open Utility.

  In the screen, select Convert to wireless and follow the on-screen instructions to connect the pritner to your wireless network.

  Note: If no option appears, click the top phone menu and select Connect a new printer, and then follow the steps by choosing a wireless connection.

  Kind regards

  Shlomi

• Printer HP Deskjet 3050 has prayer after installing new cartridge HP

  After replacing the black cartridge the wrong printer aligns the chops from the top of the page and forget the lines print. I tried all the recommended soplutions. Even the alignment page has half of it missing, so is not recognized by the printer. Even if printing from my computer or just copy. Is there a way to reset top factory of the printer page and start again?

  Hi DavidAH,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 3050 went wrong aligns the chops from the top of the page and missing print lines.

  I recommend the following guides:

  1.) "alignment Failed" Error Message displays on the all-in-one.

  2.) Troubleshooting print quality problems.

  3.) reset of the printer.

  Hope this information helps and have a nice day.

• install deskjet 3050 without cd

  I can't find my CD to install my deskjet 3050 what can I do to install it without?

  Here is the link to download the star driver full compatible with Windows 7 for HP Deskjet 3050 all-in-One Printer:

  http://ftp.HP.com/pub/softlib/software12/COL34584/al-85606-3/DJ3050_J610_231.exe

  If you want to install it on any other operating system, please see the following link and select the appropriate operating system:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062 & LC = on & CC = US & DLC = in & sw_lang = & Product = 4066452 #n187

• Printer Deskjet 3050 (J-610): Driver for Deskjet 3050 with Windows 10

  When can we expect a driver to mount the Deskjet 3050 as a network under Windows 10 printer?

  Hello

  It is:

  http://ftp.HP.com/pub/softlib/software12/COL34584/al-109394-3/DJ3050_J610_1315-1.exe

  Kind regards.

• DeskJet 3050 a-J611g / CR232A: 0X00759C98 HW_WATCHDOG C, what is error - code this? How can it be solved?

  Hello, I have a Deskjet 3050 a-J611g / CR232A. I am running windows 7 (variety, that is to say: etc. ultimate, home premium,.) code error 0X00759C98 HW_WATCHDOG C, what - what? How can it be resolved? The only thing that was changed was I enabled update automatic and put in place e print. Everything seemed fine, but the next time I went to my printer this wasd error on the screen of printer control button. Once the printer starts after reset it again. Is there a bad Council, which needs to be replaced? There seems to be nothing broken or out of place, that's why I think. Any help will be greatly appreciated! If anyone has the definition of this error, it would be very useful! Thank you in advance!

  This also happened to me. To fix it I just unplugged the printer of and held the power button for about 15 seconds. The only changes that have been made before the error occurred were:

  1: network SSID was changed

  2: tried printing without black print cartridge (later discovered that she had no effect)

  3: new software installed on computer (don't think it was the question whether)

  I hope this works for you too!

• DeskJet 3050 connects to the router.

  I use a new HP Deskjet 3050 J610 out of the box (comes with a laptop purchase student a few years ago and was never used) with a MacBook Pro with OS X 10.9.1.  I configured the printer via a USB port by following the instructions and it worked well because the driver is preloaded in the latest version of Apple, but when I try to connect to my Belkin router the printer times out.  I ran the diagnostic page and the SSID names do not match.  I can't find a way to change the SSID the printer connect manually.  There is no HP folder on my computer that would normally House the printer configuration information.  I've looked through all the documentation on HP and can't find anything that tells me how to enter the establishment.  Any suggestion would be appreciated.

  Found the answer in an answer to a question on the HP Deskjet 3054.  Worked for my system, too, so I'm running.

• HP Deskjet 3050 J610a ePrint questions

  I have a HP Deskjet 3050 J610a printer that is listed as being capable on the list of HP AirPrint compatible printers and ePrint.

  However, I can't a Web Services tab at all when you access either the printer via its IP address or in the printer menu.

  I can't find an update of the firmware on the support of the printer section and have had no response from HP email warranty covered. Can someone help get this job, I can print wireless easily from the main engine, it was installed on, but can't see the printer and any apps ePrint AirPrint apps. When printing the configuration pages any printer ID or e-mail address is printed. As active poster on the section of Microsoft Web services.

  The HP support pages only to see Help information about the ePrint for Photosmart printers and Officejet, Laserjet, Designjet even though they support Deskjet.

  Any help is greatly appreciated as this is starting to annoy me now...

  Hi all

  The matrix management model has been updated! DJ 3050 has been replaced by the 3050 a DJ, plus additional models were added.

  One more thing... If you have the mobile device (iOS, Android, Symbian) and a DJ 3050, you have a printing solution. You can install the free application of HP ePrint home & Biz. This app will allow you to print to ~ 200 models of different HP printers, including the legacy networking and HP printers compatible ePrint.

• Cannot access Deskjet 3050 has with Hp Envy M4

  I am trying to connect laptop Envy my daughter to a Deskjet 3050 x a M4. I downloaded the x recommended software from the HP driver software and when the software said installation was successful, I chose a recipe to print, but it does not print. I have uninstalled/reinstalled the software and got the same result when you try to print another recipe. There is no other steps mentioned after successful installation. Are other measures, that I should have, as a reboot?

  I'm still trying to get my daughter's hand.  She seems to be dragging its feet in front of me.  I'll get a hold of you about the success or failure of the you recommendation

  Thanks for responding so quickly.  I only wish that I could have done it same thing