DeskJet 3050 has errors in the press cannot use alignment

Hi, I hope you can help.

I just today inherited a second Deskjet 3050 J611 from a friend a hand. I'm setting up on my system and I have a problem with the alignment page printing.

My system is Windows 7 64 bit and I have connected the printer wireless to my network. The thought I want to calibrate the printer I ran the alignment, but go looking at the alignment of the mine of the internet pages is decidedly not just. Some lines seem to be missing and the illustration at the end of printing is 'lines' with blank lines. Therefore, the analysis of the alignment fails. I also printed the windows test page and that seems doubtful too with the lines of print with the tops? cut, but some lines are intact. I've included a scan of the print-out of alignment if it helps to diagnose my problem. At least the scannner works!. I can print from my Ipad 3 even if the quality is not good and the same thing with Windows printing, I hope that if I can make the alignment that the seeds will disappear.

I changed ink for new trucks and installed the latest drivers and software from the HP site.

Please help if you can.

In General, this kind of question is cleared up by the replacement of the ink cartridges. Especially with Deskjets and more with have received you second hand, the chances of the cartridge/print head (they are combined) being empty or clogged is very likey. I would as a first step, and if this does not resolve the issue here is a document of support on print quality issues which can also produce some more light on the question you have:



http://www.HP.com/United-States/consumer/digital_photography/print_better_photos/tips/print-quality.html



I hope that helps you out, and if you have any questions do not hesitate to contact me. I will reply to you as soon as I can.



Have a great day!

Tags: HP Printers

Similar Questions

  • I don't have that an ipad2, ios5 and HP DESKJET 3050 has, this disc is of no use. How do I print look like?

    Without a drive disc and the connection between a desktop computer and a printer how to printer e e-mail address. Also how do I input to the printer the router password? Pushing all the menu options, I managed to print a single copy (printing of the air) of my iPad, don't know how I did it! Can not repeat!

    To make this work (with a 3050 and other inexpensive HP WITHOUT the "Wireless Setup Wizard" façade printers), your router must support WPS (Wifi Protected Setup).  Check your manual for the router (or google for it) to check if it supports WPS.

    If so, proceed as follows (may vary slightly according to the printer model):

    1. on the front of the printer go to Wireless menu and navigate to 'Restore wireless by default'.

    2. in the same menu wireless, start the WPS or Wifi Protected Setup process.

    3. within 2 minutes, press the WPS button on your router.

    The printer and the router will communicate with them for a few minutes (Yes, it takes a while).  Afterwards, simply enable Web Services on the front of the printer and then you can print from your tablet or phone!

  • manually clean the printheads for deskjet 3050 has

    DeskJet 3050 a not print not tried red heads ink level four times cleaning is ok and the use of hp ink cartridges

    Hello fred1934,

    Welcome to the Forums of HP Support!

    I see that you can not print red with your Deskjet 3050 has, you ran the print head cleans several times, but it does not help. Try using the manual procedure in this guide: "Incompatible print cartridge" or "Print Cartridge problem" Message appears on the computer or the printer control panel, three Solution.

    Hope this helps,

  • DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

    My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

    I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

    Help?

    Hey @benjaminllim,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. Turn the printer off:
    2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
    3. When the lights come back on the router, turn on the printer.
    4. Disable any antivirus, firewall or security of your Mac software.
    5. Try to run the installer.

    Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • HP deskjet 3050 a: hp deskjet 3050 has 0xb04021a6 error codes

    At the error code 0xb04021a6 on the screen of the printer at the time wherever you turn it on.

    Have research all day but unable to know what means this error code.

    Hi @e-year-e.

    Thanks for joining the Forums of HP Support for a solution to your printer problem.

    I understand that you have a HP Deskjet 3050 has e-all-in-one printer showing an error code "0xb04021a6" when he is running. I would like to help.

    These error codes are caused by hardware or firmware issues.

    "Here is the document of suppiort designed to be used with this problem - ' 0xc19a0005" or similar error.

    Please let me know if that solves the problem, or if you need assistance.

    Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • Cannot get deskjet 3050 has in a j611 series print

    my printer does not print

    Hello

    Thanks for posting the question on Microsoft community forums. Looks like you can not print using HP Deskjet 3050 has.  Please answer a few questions to refine the question.

    1. do you get an error message?

    2. are you aware of changes to the computer before the show?

    3. what happens when you try to print?

    I suggest you perform the steps described in the article:

    Solve printer problems
    http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps. Please reply with the status so that we can help you.

  • I get the rror message. "Error adobe license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your administrative COMPUTING

    I get this error message. "Error adobe license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. (148: 3) "How can I fix it? When I reinstalled the software, I get a message that I have an invalid serial number.

    Hi John,.

    Could you please the version of Acrobat you are using, and also work on the operating system?

    To check the serial number of your product, you may return the following document.

    Quickly find your serial number

    If you are using windows you can see the following link for more information on the solution to the existing problem.

    https://helpx.Adobe.com/Creative-Suite/KB/error-licensing-stopped-Windows.html

    If you wish to contact Adobe support team, please visit the following link.

    http://helpx.Adobe.com/x-productkb/global/Service1.html

    Please click the blue button "Still need help" to connect with Adobe executives.

    Let us know how it goes. In case you need more assistance write us back.

    We would be happy to help you.

    Concerning

    Sukrit diallo

  • HP deskjet 3050 a series: during the analysis of my printer HP Deskjet 3050 a I get the COMPUTER NOT FPUND message on my printer

    When I scan from my HP deskjet 3050 printer has series, I get a message on my computer printer not found. If I connect the printer on my computer I can scan from the printer. Scan doctor tells me that there is nothing wrong with my printer.

    Hi @eightysecond,

    Welcome to the HP Forums!

    I understand that you cannot scan to the computer of your HP Deskjet 3050 a on Windows 7. I'm happy to discuss this issue scan for you!

    Please take a look through this guide, a "computer not found," "No computer detected," or "connection error" message for HP Deskjet 3050 has e-all-in-One Printer Series.

    Hope this guide to solve your problem and have a nice day!

  • Example: HP Deskjet 3050 has J11n: my printer Hp3050n used to scan to my applemac

    Until recently my HPDeskjet 3050 has scanned on my mac automatically j11n. It will not now and message scanner is not found. I am completely ignorant about computers. Help, please! Thanks.I could have disabled and now don't know how to connect.

    Hi @Valerie35,

    Welcome to the Forums of HP Support! I see that you are running into some problems of printing and scanning to your HP Deskjet 3050 has, when you try to scan, you get an error message 'not found computer '.

    If you have recently lost the connection between the printer and your network wireless, you have to reconnect using the USB key to the wireless configuration.

    Please go ahead and start troubleshooting here: printer does not maintain the wireless connection

    I hope this helps, let me know the result!

    Thank you

  • HP Deskjet 3050 has All - in - One J610 series is not compatible with mac os x 10.8 mountain lion. need help.

    Hi I have a HP Deskjet 3050 all-in-One J610 Series a as indicated in the title, and I have the operating system Mac OS x 10.8 Mountain Lion. I need help to get or install the software hp for printing wireless setup in my dorm. Any help is very appreciated.

    Hello

    I'm not not clear with your exact printer model, it is the printer Deskjet 3050 a (J611) or model 3050 (J610) ?

    For the Deskjet 3050 J610- a complete software not available at this time.

    As there is no comprehensive software available for Mountain Lion, you will need to set up a temporary ad hoc connection and then use the EWS printer to connect the printer to your router.

    • Press the button on the control panel wireless to display the options menu on the screen of the printer wireless.
    • Select on the screen of the printer's wireless settings, then Netowrk default settings.
    • Under the same wireless and select Radio wireless and make sure to put it on.
    • From your Mac, click the WiFi icon and then click on join another network.
    • Click view networks, select the printer SSID, it will include 3050 or J610 in its name, then click on join.
    • Allow 2-3 minutes to establish the connection.
    • Open Safari and click on the favorite icon ().
    • Hello-click and then click on the name of the printer, the EWS page appears.
    • Enter the network tab.
    • Less wireless (802.11) click Wireless Setup Wizard and then click Start the wizard and follow the steps on the screen to configure the wireless connection.
      Note: If you must provide the type of security for your wireless network, you can click the WiFi icon, click Network Preferences and select the Wi - Fi network. Click Advanced, and you will find the type of security for your network in the Wi - Fi tab.
    • Once the wizard of wireless via the integrated Web server configuration is complete, click the Wi - Fi of your Mac and you connect to your router again.

    Finally, go to System Preferences > print & Scan and add the printer. confirm all calls to get the drivers from Apple servers

    For the Deskjet 3050 has (J611), be sure to connect the printer with a USB port and follow the installation below:
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&cc=us&DLC=en&LC=en&OS=219&product=5061082&sw_lang=

    Please let me know of any problems,

    Shlomi

  • Install HP deskjet 3050 a error: missing operating system

    My printer HP deskjet 3050 has during the installation, I get the error: operating system file missing c:\Windows\inf\usb.inf

    Please help
    Windows 7 64 bit

    Hi Nathan,

    1. What is the accurate and complete error message you get?
    2 does the problem only occur when you are installing Hp Printer?
    3. don't you make changes to the computer before the show?

    Method 1: I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 2: I suggest to perform the clean boot and then try to install the drivers to check whether a third-party program is causing the problem.

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
    http://support.Microsoft.com/kb/929135

    Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

    Method 3: I suggest you to uninstall and reinstall the latest drivers on the manufacturers website. http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodSeriesId=4311836

    Post us the results once you try the steps above.

  • WLAN Autoconfig error 2: the system cannot find the specified file

    Hello!

    I've read through messages for 2 days now the solution could apply to my problem yet.
    My wireless adapter stopped working and I traced the problem back to Services-> Wlan AutoConfig' that cannot be started. Whenever I press 'Start', I get a message saying "" Windows could not start the service WLAN autoconfiguration on the computer Local Wlan AutoConfig error 2: the system cannot find the specified file "."
    I tried the "sfc/scannow" and "netsh winsock reset" command in an elevated command prompt and then restart, but neither have worked.
    Now I'm all out of options and I hope someone here can help me!
    Best regards
    Anders

    After doing a lot of research I found a solution. It turns out that my registry has been screwed up (I also try to get aero back and noticed that I have no "themes" in the registry or services.) Wlansvc in the registry were missing folder and the security settings.

    My problem was

    WLAN Autoconfig error 2: the system cannot find the specified file

    As I had windows 8 on the other partition, I exported the registry (wlansvc), went into windows 7 and he added. Now I can connect wirelessly.
    I'm uploading my reg file (I use windows 7 ultimate with sp1 x 64).
    http://speedy.sh/8sUs2/WLAN.reg
    I hope this helps (I'm not sure if this is specific to my wireless card - edimax)
  • DeskJet 3050 a: hp deskjet 3050 has not not red print

    I recently replaced both my cartridges on my Deskjet 3050 has. He had already printed perfectly for the past 2 years.  I checked that they are correct cartridges of real HP purchased from HP.

    I'm on Macbook Pro with OS X Yosemite 10.10.5 version and wireless connection.

    Please can anyone help because it's so frustrating?

    Thanks in advance.

    Martin

    Hi Martin,

    Try to print a self-test report by selecting settings > reports > Self Test.

    You see the magenta color printed correctly by the equipment?

  • Why no driver Deskjet 3050 has 7 can I?

    I'm trying to set up my HP 3050 has on my HP laptop running Win 7.  I assumed that a driver would be available in

    Win 7.   There is no HP Deskjet 3050 has no appropriate driver available.  My disks went in a fire.  What should I do? Thank you for your suggestions.

    Hello

    Have you checked the site?

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5061058&TaskID=135&prodTypeId=18972&prodSeriesId=4311836

    I hope this helps.

  • Error 2: The system cannot find the specified file

    Failed to start the Windows Audio service on the local computer. Error 2: The system cannot find the specified file.

    Help, please
    Sam

    What version of Windows, including service pack (right click on my computer > properties)

    What past just before the problem arises?

    Click Start > run > services.msc > OK
    Scroll down to "Windows Audio"

    The Windows Audio service must be started and its "Startup type" should be "automatic".  If it is not started, double-click the entry and click on the Start button.  If it is unable to start the service or instead generates an error message, the file for the Audio Service may have become corrupt or deleted (although this file has to be protected by Windows File Protection).

    Search for your system (probably C :) drive
            
    audiosrv. DL (it's only one L)

    Make sure to look in the "system folders" "hidden files and folders," and "subfolders.

    You should find the audiosrv.dll (with two Ls) in C:\Windows\system32.

    If she is not there, it should be in C:\Windows\ServicePackFiles\i386

    If it's not there either, you have a file named audiosrv.dl_ in C:\i386?

Maybe you are looking for