DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

Similar Questions

• Destjet HP 3050 has j611 all-in-one series does not not on windows 8

  I got Hp Deskjet 3050 a j611 all-in-one series on my windows 7, I've upgraded to Windows 8 and my printer did not work properly so I uninstalled so I could reinstall it, but it will not install because it says that it is not compatible. is it possible that I can make this printer work using Windows 8?

  Hey kelyka1,

  I guess you are trying to reinstall with the CD supplied with the printer.  Click on the link below to access the download page for the driver for Windows 8 for the Deskjet 3050 a J611.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109013-2&cc=us&DLC=en&LC=en&OS=4132&product=5061082&sw_lang=

  I hope this helps.

• HP Deskjet 3050 has e-all-in-one: impossible to download drivers and software Web site

  I have seen this problem posted a few more times, it seems that it is recurring.

  I reinstalled Win7 on my machine.  I try to reinstall the driver and software for my all in one.  I get ' HP is compile your results. " It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. ' message for more than 10 minutes now with only the busy indicator.  I tried this on Chrome and IE with the same results.  Help.  I need my scanner.

  The pilot site is always questions, but you can download the driver Windows 7 x 64 for the HP Deskjet 3050 a directly from the link here:

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

• Cannot install driver for HP DESKJET 3050 a j611 all-in-one using windows 7

  Stagnate in the printer, but can not find a driver. Have tried to set as the default printer, but right click I only get CREATE-HELP-DELETE SHORTCUT-PROPERTIES of the DEVICE can someone help as HP are useless

  You don't install it correctly, but just pluged in there.

  It must have taken all of 10 seconds to locate your model on the site of HP

  You install using the cd of HP, or the full functionality of the HP site download and does not connect until the installation says to

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=5061092

• HP Deskjet 3050 has J611 printer without a driver.

  What happens to my driver for my printer HP 3050 has J611 it saids no driver?

  [Moved from comments]

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer for this information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• HP Deskjet 3050 has J611 series watch in trouble with wireless printing

  Hey there,

  I have just a series of combat a HP Deskjet 3050 printer a J611 and wireless printing to work perfectly. However, for the last week or so is no more.

  The printer is connected to the network, as the result of the wireless network test is proven and it is the same network that the laptop is connected to. I have already uninstalled and reinstalled the software. The wireless light is on and I can see the signal strength and the IP address. However, it still works.

  I also I sent an email to the printer to see if it worked. Initially, I received an automated email saying my printer is not connected to the internet and then printing will be delayed. I didn't touch the printer after that, but about 6 hours later it started to print.
  I also tried to connect the printer with a USB key and configure settings wireless via USB does not work either. The computer cannot find a printer connected to the network. There is no firewall blocking the application or the printer.

  My settings:

  Router broadband wireless ADSL2 + -.
  Huawei EchoLife HG521
  TalkTalk
  Laptop - Medion Akoya E7214
  32-bit operating system
  Windows 7 Home Premium

  Help with this would be much appreciated! Thank you!

  Larissa

  I doubt disturbed the other printer.  Kaspersky can be a problem, but we're going to explore other things first.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• DeskJet 3050 has J611 printing project

  So I have a 3050 a J611.  I want to adjust the print quality settings and it won't let me.  I'vegot best, Normal, project and custom, but only Normal and custom are selectable.  I want to be able to select one of them, why can't I?

  I was looking just at things once again, and it's sort of silly system.  Quality is selectable in the tray press selection section.  I think they have just forgot to remove the redundant part for quality selection.   v

• HP Deskjet 3050 a: HP all-in - one Printer Installation remotely

  How can I download and install the remote HP all-in-One Printer software without going through the MS Store?  He wants to put me in place and MS Account and put all my files, etc. on a site not on my computer.  I don't want to do that.

  @Johanned

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

  REO

• DeskJet 3050 has J611 printer, windows 7 64, sony vaio F series with router netgear seem incompatible

  I was able to connect successfully the printer to my computer sony vaio notebook, as much as I first disconnect internet router, after that the installation I can connect internet once again, then it works for a few hours. However, when I turn off and restart the computer, the computer does not find the printer. Meanwhile, the printer is connected and has the correct network and are accessible from my Ipad or eprint, but not of my sony vaio. I tried all the solutions proposed in the various forums without success. Can anyone help? I also checked that my computer is on the same network. The printer appears "shadow" under devices and printers. Thanks in advance.

  What router are you using?

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.

  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for the second.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help

• HP Deskjet 2540: My printer cannot connect to the wireless network (SSID is not found)

  Hello

  I have a HP Deskjet 2540 printer that is configured to print using the USB cable, and I have no problem printing through it. I just bought a router (D-link DWR116) and I'm trying to set up the connection to the router wireless to my printer. When I use the printer setup & software and select the option "convert a connected USB printer wireless", I can choose to enter into the setting of the printer access the router automatically or manually. These two will come with the same problem where the program is my name SSID of the router successfully but then failed to connect to what the SSID is not found.

  It comes on it comes up with the error message:

  Question: You have manually entered the name of the network (SSID) cannot be found.
  Solution: Check that your wireless router is powered. When to manually enter the name of your network (SSID), make sure you enter exactly including upper and lower case and spaces.
  ============================================================================================

  Which is meaningless because it came with the SSID earlier and I chose what options the wireless network available. I tried to manually enter the SSID, but after entering the password for the router, the same error message appears.

  Help, please.

  Thank you

  In fact, I solved the problem. Something about the wifi light on the printer. It can not be flashing, I don't know what the blue light flashes on the wofo of the printer, but I don't think that it means that the wifi is on.

• Deskjet 3050 printer has J611 all-in-One series

  I can't seem to attach to my computer

  Hi cidlittle54,

  What is the operating system on your computer?

  How do you try to connect the printer to the computer?

  Installation of the software of the printer in Windows for a USB cable connection

  Install the software of the product for a wireless network connection

• HP deskjet 3050 has J611 series and Mac Osx 10.7.1

  I am trying to install the printer hp desk jet 3050 a (series j611) and I have the mac os x 10.7. 1 operating system and it does not install. Can you help me?

  No, this is not true.  This printer is compatible to the current OS X 10.8.  Your CD may not be compatible, but...

  Download and install the latest version of the software for your printer from Driver link request at the top of this page

• HP 3050 has J611b (all-in-one)

  Is the foregoing allows scanning with the ADF?

  If so, how to enable it? I use a Mac OS X 10.6.8

  Hello

  This may be possible from the software, but I'm not to known mac software (im a boy of windows), but as far as I can see you need to parse from the software, when asked to choose to scan another page and when, select Save. It will ask you what type of file and when you select a file type that supports multiple pages as PDF them should be available to select a checkbox "save all items in a single file.

• HP DESKJET 3050 HAS J611 PROBS JPG SCAN

  Why this device scan all my documents in a JPG format and not a Word Doc or plain text?  Also is this device of rock?

  DOC7777 wrote: why this device scan all my documents in a JPG format and not a Word Doc or plain text?  Also is this device of rock?

  Hello DOC7777, I think that the default format for your printer is in jpg format. You can download and install the latest version of the software for your printer, if you have not already.

  There may be an option to save the scanned in a different format. Most of the scanned jpg images can be inserted into a Word document.

  Here is the link for the package full feature software/driver for your printer.