DeskJet 3050 is connected wireless but does not actually print

Similar Questions

• Re: Deskjet 3070 - replaced the cartridges but does not now print!

  I have the same problem with my printer Officejet 6700 Premium. I just replaced all the cartridges with HP new ones. The printer is now going through the motions but does not print blank pages. This happens for all what I am trying to print including Diagnostics pages. The printer is a little older a year is not under warranty. Any help would be greatly appreciated!

  Hello twoshirts,

  I saw your other threads, and I understand that you have completed all the procedures listed here troubleshooting: printer does not print black ink or color of ink or prints blank Pages without success.

  I would like you to follow the steps below:

  1. reset of the printer, please make sure that you plug the printer directly into the wall, do not use a surge protector or power bar, they can cause the printer is in an error state and lose features of base over time.

  2 a 'cartridge problem', "Ink cartridge failed" or not "compatible ink cartridges" Error Message appears on the all-in-one, I know you did the cleaning steps, but, if you please, reinstall the cartridges and perform all THE steps listed

  3. now go ahead and run HP print and Scan Doctor- it has been designed to provide users with HP and features troubleshooting fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  I understand that you are not able to print diagnostics from the menu on the front panel as well, but want to see if the PSDR detects all conflicts in the software or drivers.

  Please let me know the results.

  Thank you

• OfficeJet pro 8600 more connects wireless, but does not connect to Internet

  I use Windows 7.  The free thread is ideal for printing, but I do not understand why the web

  does not connect.

  Hi susea;

  Hope you are doing well and I'm sorry that you are having problems.

  Jean-Marie this tool;  http://support.HP.com/us-en/document/c02037530

  If that didn't help then share what router you're using, please indicate brand and model? I'll offer to make sure that your router is updated with the most recent firmware, also I personally always use Google's DNS servers. Some servers DNS provided by your ISP (Internet service Provider)

  You can change this setting by going to do the following:

  Press the Win key on your keyboard.

  1. Type Ncpa.cpl (this will take you to the network connections)
  2. Select your wireless connection
  3. You will see a screen on the botton, you will see a button called properties, near the left button
  4. On the Properties menu go to IpV4 (if you don't see scroll down) double-click to open
  5. In this screen, you will see (get IP address automatically) slot that you wil see the Obtain DNS server address automatically select this option
  6. Type 8.8.8.8 and 8.8.4.4 airfield

  I will also choose a static IP address, and this can be done here as well.

• OfficeJet J6450 - printer connects wireless but does not print job cable modem replacement

  Material: My printer is an OfficeJet J6450. I am running Windows Vista, current update.

  Probably triggering the event: I replaced my modem docsis 3.0 with a doscis 2.0 modem. PSI has remained the same. All other software and firewall remained the same.

  Dysfunction: After the replacement of cable modem, I found that I could print is no longer in my HP OfficeJet 6450. I would get an error in the printer window ' error - print. "  After the reboot after the publication of the initial error, I would get the error "error - sent to the printer.

  What I did:

  As a first step, I've uninstalled and reinstalled the HP software for the printer (complete package with exception of PhotoSmart and HP customer monitoring program).

  Use the connection for the network printer wizard, I entered the router password wireless to the printer. At first I don't have a connection. Then I rebooted the computer and the printer. I also returned to the default setting of network on the printer and repeated the configuration of the network. The connection was finally successful.

  The automatic test of the network page and the network printer wizard confirms the connection. Digital display of the printer and the HP diagnostic utility has also confirmed the connection. But the diagnostic utility is unable to print a test page and throw an error - "Print Test failed.

  The result disappointing:  I still can't anything to print wireless.

  ... Thanks in advance for your suggestions to get my printer back on...

  Go to start > Control Panel > printers and delete all instances of the printer.

  Then re-add the printer:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.  Get IP address of a Test of Netowork wireless on the front of the printer (usually in the network menu).
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Windows Vista 7 and HP Officejet Pro 8500 A910 connected wireless but does not properly

  I just moved in with roommate and wireless to connect to Windows Vista 7 with HP Officejet Pro 8500 A910... when I select print test page or a document to print, the printer and the computer are connected and respond, but instead of the test page or document the printer starts printing of dozens of pages of AI computer jargin: % BeginProlog %. : file Pscript_WinNT_ErrorHandler 5.0 0/currentpacking where{pop/oldpack...etc etc... This jargin continues for more than several pages. Anyone know what is the problem and how to fix?   Thank you, cropcircleguy

  Hello

  Please visit the link below to fix the problem.

  http://whp-Java.extweb.HP.com/ewfrf/wc/document?DocName=c01954177&LC=en&cc=us&DLC=en

• DeskJet 3070 - replaced the cartridges but does not now print!

  Ciara

  Can you please send me information on how to solve this problem?

  Thank you

  D

  @loxluta

  I answered your private on this message.

  Thanks, Ciara

• HP Officejet: How can I get my HP Connect acct give me credit for printed pages, but does not start printing

  How can I get my account HP Connect give me credit for the pages that they have counted print which did not actually print because the computer did not communicate on the printer correctly.

  Hello @Gunth,

  Welcome to the Forums of HP's Support. I guess when you are referring to the credits of the page you want to say that the instant the ink program. I would like to help.

  This isn't something that can be controlled from your connected HP account. You will need to speak to a representative of the competent Department of ink instant.  (A congratulations to move things in the right direction would be appreciated). The question now is how to communicate with the instant the ink service.

  Here is the solution/answer:

  The following link will give you the phone number for the different departments of the ink instant.

  Simply choose the one that applies to your country of residence.

  Instant ink contact information.

• Premiere Pro CC 2015 active charges but does not actually open.

  I use Windows 10

  Processor: AMD FX (tm) - 8350 eight cores processor (8 CPUs), ~4.0GHz

  Memory: 24576 MB of RAM

  Card name: AMD Radeon R9 x 270

  So I tried the first uninstall and reinstall after rebooting my computer and put an end to its process in the Task Manager, but the first does not open without worrying, although it appears in the Task Manager each time. And I'm not sure what the problem is because my other adobe products opens fine. Any ideas or help on what could be the problem and how to solve?

  Hi rich,

  Follow the steps below:

  ' 1. go to Menu start and open the Device Manager.

  2. click on the drop down for "graphics cards".

  3. right click on the AMD graphics driver and select "disable."

  4. try launches the first after you turn off the AMD driver.

  Kind regards

  Navdeep Pandey

• Computer can see wireless but does not connect

  I have a new HP EliteBook Folio 1040 G1 running under Windows 7 64-bit. The computer can see the wireless network, but when I try to connect to them I get a pop up saying "Wireless: assocaiting" followed by a saying "Wireless: disconnected" and the connection never works. In this case connect to any wireless network. I know that networks and passwords are correct, because my phone and iPad can connect to them without problems.

  I've updated all the drivers via Windows Update and also the SP support Assistant. I tried to uninstall the wireless driver and allowing windows to discover and install from scratch. Nothing seems to work. I see a similar thread a few years ago in the forums but no resolution. I never got so so boredom before wireless connection and I can't help but suspect a hardware failure.

  Can anyone suggest anything?

  Thank you

  Phil

  OK, I realize, but this cannot help others, after raising a warranty with HP call, it turned out that my problem was hardware after all. HP sent a technician to replace the network card, but when he opened the laptop, it turned out that the antenna is detached from the card wireless altogether and reataching it solved the problem.

  Like I said, probably not much help to anyone because it was a specific question, but I thought I would post the result anyway.

• C309a Photosmart AIO prints ok wireless but does not havea analysis option

  I have installed, reinstalled, have chess 3 and level 4 uninstall many for = imes and cannot get the scan to work function unless I connect the printer using a USB cable.

  I created a static IP 192.168.0.6 and this works well for wireless printing.

  The wireless network test report shows the connection to 192.168.0.6 with an excellent signal strength.

  All categories in the summary of tests show 'pass' and no other network detected.

  The router is open, without passwords or encryption.

  I disabled my firewall/protection virus on the pc and the router. (even if it prints ok wireless)

  The computer is a HP Envy23 touch

  The operating system is Windows 8.1 update

  In addition, the HP solution Center fails to install.

  I did a "factory reset" on the printer.

  It drives me CRAZY!

  Can anyone offer a solution?

  Finally fixed!

  If someone elsehas this problem, here is what worked for me.

  Run the uninstall of level 3

  remove all the Photosmart left of files in C:\program files (x 86)

  Open regedit, find and delete all entries "Photosmart".

  run cCleaner registry cleaner twice

  reset

  If the network check out is enabled, you will find the printer listed under "devices and printers".

  run print and scan doctor and let it download and install the software.

  I hope that someone help avoid pain inflicted by is not HP do a correct uninstallation.

• HP Photosmart C4780 prints wireless but does not scan.

  I have a HP Photosmart C4780, which works great on USB, but only print via a wireless connection.  This model may be able to analysis via the wifi connection?  I have an IBM T23 running Windows XP SP3 with all updates.  I see the CD-ROM driver I have is version 14.1.0 which is the latest version online also.  I missed something in the installation that makes possible the wifi connected to scan?  I saw a USB connection through the room, when I want to scan anything.

  n2prise,

  You could try scanning utility ande printing:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en&os=228&product=3794615&sw_lang=

• Battery "connected, charge", but DOES not charge.

  Hello

  I've recently updated in Windows Vista Home Premium to Windows 7 Home Premium.  With Vista, my battery played very beautifully and I've never had problems.  As soon as I have upgraded to Windows 7, I currently has the following problem:

  When I hover over the battery icon in the system tray, it says ' 19% available (plugged in, load).  However, the battery is not at all.  The small farm level animation stops and, although the system seems to thinking that is my battery charge, it is not.  When I first installed the new OS, battery charges to 69% with the same problem, so he went up to 75 percent for about 1 week before in free fall, so that now my battery charge limit is 19%, which, as you can imagine, takes about 15 minutes to the battery power.

  After several redundant and unnecessary communications with Microsoft, I thought that maybe someone on this forum might have experience with this problem or any suggestions on what I could try.

  Note that it is NOT apparently common problem some people have with the battery saying "plugged in, not charging", that my system is specifically stated the battery recharges when it is not.

  It took me some time to get even Microsoft agree the problem they insisted that it was because my battery is a bit old.  However, this happens with the two batteries that I own, using a charger that I have, and, as I said before, it started just when I installed clean Windows 7.

  Thanks in advance for any help!

  
  

  Ryan

  Hello Ryanr1083,

  We had this problem. I suggest to contact the manufacturer of the system, and you may need to replace the bettery.

  You can see the links below, which has similar problems.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/f06a5bae-0CAF-4EAE-ae56-1aec1e1291e6

  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/8f41bb6e-3702-4DD3-8d34-d5a4d1cff915

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/765fc712-678d-4C8E-AA00-6abb00e3eb62

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/8a5f9b80-800A-46ce-bdeb-435f411fb7dc

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thank you
  Mir - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• DeskJet 3052. screen lights up but does not show words or options.

  I can't choose copy or scan or other options because I can't tell what buttons to push.   Suggestions?

  Hi there lunchthyme,

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  Good luck!

• Satellite L750 - WLAN Driver seems installed BUT does not actually

  I formatted my laptop 'Satellite L750"which, like"Realtek RTL8188CE' wireless network. After the download and installation of the network adapter driver for Windows 7 x 64 Toshiba site wireless, everything looks fine on the screen of the installation and after installation. Driver status says 'this device is working properly' and appers wireless icon in the status bar as expected.

  BUT wireless serach finds no access point. When I look at ' ipconfig/all' into the command screen this adapter is not seen in the list?

  I turned on and off the map of the software several times. I disabled and enabled driver several times. I tried to download the driver of this same card 'Realtek' Web site but nothing has changed?

  What is the problem that I can't understand. Before the format it worked well in the same operating system windows7?

  You can enable or disable WLAN using FN + F8 key combination?

• 4620 HP print from wireless then does not USB print

  Product HP: HP 4620

  Impression of the OSs: OSX (wireless), Windows 7 Home Premium (USB connection)

  Problem: after that I have an OSX wireless printing, all future work print of the Windows 7 system sit in Quebec until the Windows box is restarted.  All further work of OSX after work Windows are also qued.

  Any help is appreciated.

  Try to run the doctor print and scan and check the results.

  http://support.HP.com/us-en/document/c03286146

  Alternatively, you can restart you Printer Spooler to see if that helps. Do you know how to perform this step?