DeskJet 3512: 3512 Deskjest prints and then it says error ' impossible communitate with printer

I had been using a HotSpot to connect with the printer - now cancelled hotspot and back to USB connection.

Priner will print 1 document, then send a cannot connect error.   Allows you to cancel the document.

It seems that the computer sends the document twice? and leaving an impression and the second get error.

If you miss the error message (cover, etc.), it does not print the following document.

I rebooted the computer, deleted all of the HP software and reinstalled the HP software.

Any help would be appreciated.

Thank you

He stopped doint it this morning.  HAAVE not changed anything since I posted.

Tags: HP Printers

Similar Questions

  • Unknown Publisher box opens, I click run, it starts and then stops, saying "error reading setup initialization file".

    Windows doesn't let me download an application from my library to the city.  It is an application used to download their books. I have Vista Home Premium on my HP Pavilion.

    I start the download, the process begins, and then a small dialog box opens saying "Unknown Publisher" and the choice of 'run' or 'Cancel '.  I chose 'run', it seems it will continue then a little screen pops up saying "error reading setup initialization file."  I "ve never had no problem download at this point.

    For the same problem, I tried the following and still no luck:

    I've got "pop-up blocker" turned off.
    I disabled the "Inprivate filtering",
    I turned off my "firewall" temprarily

    Any other suggestions for this problem?
    Thanks for your help!
    Winifred_M

    Hi Winifred_M,

    Thanks for posting on the Forum of answers.

    If you can provide a link to the application, we can try to recreate the issue.
    Otherwise, it is perhaps a question that you should take with the Publisher of the software.

    However, you can try to use the Windows Installer CleanUp utility:

    When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.

    Do not worry. Windows Installer CleanUp Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

    Download the Windows Installer CleanUp utility

    We have updated Windows Installer CleanUp Utility. This version of the Windows Installer CleanUp utility works correctly in all versions, 32-bit and 64-bit Microsoft Windows. If you have an earlier version installed on your computer, we recommend that you download and install this latest version.

    You must be logged on to Windows with a user account is an administrator on the computer to run Windows Installer CleanUp Utility. For more information about how to install and run Windows Installer CleanUp Utility, see the section "more information".

    You can download Windows Install CleanUp Utility starting from Microsoft Download Center:

    Download the Windows Installer Cleanup Utility package now.
    (http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)

    Copied from http://support.microsoft.com/kb/290301

    Please let us know if that helps.
    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • O2 dongle is never to step of the password and then just says device not detected / found

    Original title: im trying to use my o2 dongle to connect to the internet, but for some reason some he used to let me...

    Ive connected the dongle and it goes through the normal treatment it says connection. However, it's never at the stage of the password and then just says device not detected / found

    Hello

    You can try to reinstall the USB controllers and check.

    a. Click Start and type devmgmt.msc and then click OK.

    b. expand Bus USB controllers.

    Note: You will need to scroll down to find this point.

    c. the first USB controller under Bus USB controllers right click and then click on uninstall.

    d. Repeat steps above for each controller USB is listed under Bus USB controllers.

    e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

    f. check the device to see if it works.

    You can also consult the following link:

    Tips for solving problems of USB devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Hope this information is helpful

  • WinZip settles just, he managed at the end of installation and it will not install a shortcut and then I get error 2902

    original title: cannot install Winzip error 2902

    WinZip are just install, he managed at the end of installation and it will not install a shortcut and then I get error 2902

    Are you aware that Windows will unpack the files without the need of Winzip or any other 3rd party program?  It has also the ability to create files zipped, so why would need Winzip?

    Good luck.

  • Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

    Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

    Hello

    Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

    Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

    Thank you

  • I am trying to install Microsoft FSX and it stops saying error 1607 unable to install "installsheildscriptingruntime".

    I have recently reinstalled windows vista on my asus cube made all RPG updates defrags

    I'm trying to install microsoft fsx and it stops saying error 1607 unable to install "installsheildscriptingruntime".

    IV tried to use the help but no joy help please

    Hello

    Thank you, I ran a microsoft fix - it program and it worked now I loaded my flight sim fsx

    and works very well, thank you for your help

  • 8600 premium print and then gives the error message that it cannot print the document that it just printed.

    It isn't really a problem, just a nuisance.

    Last week I printed several documents from PDF files and print documents.  Once printing has been completed, an error message would be displayed on my laptop that the printer cannot print the document.  I've ignored the warnings and continued, and then the printer would print the document again.  I found that if I clicked on the error message, printing in double stop.

    Since then, whenever I don't print from any program (MS Office, Firefox, Chrome, IE, etc), I still get the same message if the end of the print document.

    Just a nuisance, but if I forgot to point out the error, the doc print again without error message after the second printiing...

    I noticed that the queue, regardless of the size of the document, always freezes on the last page to print before closing.

    I turned and turn it back on and reset the connection to a static IP address for the printer wireless...

    Hello DRS1966,

    Yes, I can understand the frustration of getting an error once printed of your document. I'm glad that's not interfering with your documents but would like to try and get rid of it. Please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

    Please let me know if it detects errors, or that it cures the problem. I'll watch for your reply.

    Thank you

  • my iphone will not restore and then it says: cannot find iphone

    need help

    Make sure you have the latest version on itunes installed on your computer download itunes free www.itunes.com/download. Then see here... http:support.Apple.com/kb/HT1808. You may need to try this more then once. If you use windows-Temporarily disable your firewall or your antivirus software, and then try again. If you want more addition to this situation of www. http://support.Apple.com/en-us/HT201413.com

  • after update my screen jumps and then down says something about sha - 1 certificates. any help?

    When I open the browser the bottom of the screen jumps and then after a while, I get a screen. This looks like a devloper control screen. and receive warning messages on sha - 1 certificates.

    Hello, if it happens by itself, please make sure that that you do not encounter the keys that are stuck or shift on your keyboard (or try with another keyboard). what you describe sounds like the developer of firefox tools are open, they can be invoked by pressing F12 for example...

  • After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

    Signature of the problem
    Problem event name: BlueScreen
    OS version: 6.0.6000.2.0.0.768.2
    Locale ID: 2057

    Files helping to describe the problem (some files may be is no longer available)
    Mini111709 - 01.dmp
    SysData. XML
    Version.txt

    See a temporary copy of these files
    WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

    Additional information about the problem
    BCCode: 1000008e
    BCP1: C0000005
    BCP2: 81FA7519
    BCP3: 851D1F98
    BCP4: 00000000
    OS version: 6_0_6000
    Service Pack: 0_0
    Product: 768_1
    Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

    Hello

    Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
    View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
    in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
    a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
    information on all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Recently, asks Windows to format my device in G: (SD card) and then he said: Windowns impossible to format.

    I've never had this problem before.  Still, I inserted my SD card then transferred my files from the same card in the same way as always.  He asks to format the device in the g and when I try, it says that Windows is unable to format... It is a huge problem for my work.  I tried an LPB SD card and the same thing is happening.

    Hello
     
    You cannot format a disk or partition that is currently in use, including the partition that contains Windows. It is a safety feature so that you cannot delete Windows by accident. To reformat your SD card, reboot your computer and try to format.
    Try SD card connection to another computer, backup the data and format the SD card.
     
    To format the G: try the following steps.
    1. open computer.
    2. right click on G: and Format.
    3. Select the NTFS file type, and then click format.
    4. click on ok.
     
    If the problem persists, connect the SD card to another port and verify its operation.
     
    For more information on the 'formatting of disks and readers' visit this link:
    http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives
     
    I hope this helps.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.
  • Thunderbird stops for one minute with the symbol of the waiting and then returns an error message on a script does not? CAUSED: By McAfee

    Thunderbird stops especially when you write a message, displays the circle waiting and finally back with a message on a script does not properly. The choices are stop script or continue, the choice is obviously stop. It's embarrassing, I have set up with the same problem with XP on Thunrderbird and on Firefox and supposed to with Win 8.1 this would go, I was wrong. It is a standard installation of you bird, have not had the problem again with F'fox.

    Thanks for the info, I intend to replace McAfee but looks, as norton may have the same problem or a similar problem and is probably what is causing issues with XP. E machine XP will disappear but will have to solve on the new machine.
    Once again thanks for the info.

  • When you try to open and then immediately the error occurs.

    Error.png

    When you try to open then immediately the error.

    See here, Douglas.

    Beat

  • DeskJet 3512 simultaneous usb and wireless?

    I have summer/am hoping to be able to set up so that my wife could print 'Wireless' so that I could maintain the ability to print from my desktop. Now, I see that I must "move" backwards?

    Is there a way that it can be placed on my desktop USB while allowing it to print from the laptop, whenever she needs?

    Hope that makes sense has failed to find anything while I was searching for this problem... ?

    Thank you!

    Connect your via USB, install the printer.  connect wirelessly to the woman, the printer and wireless.  Should work just fine.

  • DeskJet 2540 all in one print a few pages and then stop saying printer error

    I'm on windows 8.1 x 64, I use office 2013 pro, I had this problem for some time and now I'm getting really annoyed that there is no solution for it, yet I have searched several sites and forums and nothing. I'm in the middle trying to print something IMPORTANT for the University. I saw someone posted on the use of another driver, but who can't find anywhere and i ' ts becomes so frustrating, I uninstalled and reinstalled, using the software dr anything. someone tell me for gods sake there at - it a fix for this problem, if not I'll get a refund sorted by your warranty cause this is outrageous.

    This problem is now solved for me, my brother helped me find the cause, it turns out that when you use your firewall it seems to interrupt communication on wifi as it print fine with usb and wifi turned off. what you need to do is to find the ip address of the printer and add it to your chest/whtelist firewalls etc., it shouldn't be a problem

Maybe you are looking for