DeskJet 3520: deskjet 3520
Update Windows 10 a few months back. Printing worked very well. Today it stopped working. Tried everything. Now, when I try to reinstall the printer driver, I get an error that says: devicesetup.exe has stopped working. I can't the printer to print anything.
Could be updated Windows 10 recently. Please check your history of updates of Windows 10 and remove/uninstall kb3132372
Note: Microsoft is working with Adobe now:
To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.
Tags: HP Printers
I'VE JUST SET UP MY DESKJET 3520 TRIED TO PRINT MY DOCUMENT FIRST AND BLACK IS VERY BAD QUALITY, SO SMALL THAT IT IS BARELY READABLE, IVE TRIED TO RE PRINT 5 TIMES AND STILL THE SAME... CAN SOMEONE HELP ME? THE BLACK INK CARTRIDGE IS DATED...
I've sorted it my self, I took the black cartridge and wipe the tip with paper, the was not sink much ink was out at first, but more I wiped the most ink began to flow,
Made a few test prints and now it seems in good condition.
Maybe a blockage on the cartridge
Running Win 7 and used to have an all-in-one HP Deskjet 4200. All print very well, but was not really happy with the photos. In any case, recently bought a HP 3520 and am having problems printing. Still using the same computer (Asus) and Microsoft Office software.
That is the problem. When I select either normal or draft mode, the page displays two lines, ignores the three following, then repeat. This happens no matter what type of document that I use. In optimized mode, it prints very well. Of course, which also uses the ink more. Is there some hidden settings that I'm missing? I even tried to install it on another computer running XP and the same question.
HP technology doesn't have a lot of help, and I reinstalled the software, realigned the print heads and made a double cleaning.
Photos of printing OK.
I'm a loser.
Because the best way to force out more ink on the page, essentially put more ink on the page as you would normally in Normal mode or project. The definition of the best mode of our resources is:
"It is the highest recommended print quality." It uses the patented color HP PhotoREt technology for best results of treatment. The declared resolution is 600 x 600 dpi, but PhotoREt provides improved results. »
Since it is a deskjet, ink and the printhead are integrated together to replace your best option for a print head is defective or if you are simply more ink.
Let me know!
Although I have a lot of little black ink low on color my impressions are coming in red now in yellow instead of black and Red
Welcome to the Forums of HP's Support. I understand that when you print using your printer Deskjet 3520, a problem of print quality with regard to the colors.
I've included the document to solve the problems of quality Print to the HP Deskjet 3520 and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series . There the steps you want to fix the problem of print quality.
DESKJET 3520 ON WINDOWS 8 (64-BIT) ALMOST NO BLACK IN ONLY IS HOISTED ON THE PAPER WHEN I PRINT. I USED THE HP DOCTOR. I DOWNLOADED THE LATEST VERSION OF THE DRIVER. I CLEANED THE VENT OF THE CARTRIDGE. I REPLACED THE CARTRIDGE WITH A NEW CARTRIDGE BLACK... ALL HELP IS IS FACT. WHAT ELSE CAN I TRY?
Have you called HP? (1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.)
If so, what was the outcome of the appeal? If you do not call, please do and let me know how it goes.
Hello... I bought and installed my deskjet 3520 on my wireless network and 2 laptops about 1 week ago.
Everything was fine but then a PC started refusing to connect to the network.
Technical support to the Belkin unhooked all the network and uninstalled everything... then reconfigured a new wireless network. Call Net2.
Access both the web very well on Net2 PC but the printer connects is no longer makes sense if he still thinks I'm on Net1.
So... the question is... What is the best way to get the 3520 to be accessible on Net2 on BOTH computers.
I didn't want to screw up whatever it either so have not tried whatever it is me again!
I'm reasonably notified have the installation disc. Win7 operation on both computers. Wired ethernet connection available and can connect each PC with a USB stick if necessary... but really want to use both wireless. I also have original HP print and scan doctor installed from the installation process!
Hope that helps and thanks in advance!
When you post again, I'll check in. I wish you the best in getting the printer is connected to the new configuration of the network.
If you need assistance I am more than happy to help. Have a wonderful and safe trip!
Since the update to Windows 10 I lost the HP page that allows me to update the ink, scan to printer, etc. How to do that now? Your help will be greatly appreciated. Thank you.
I saw your post about software problems you encounter since the upgrade to Windows 10 and I would like to see if I can help.
First, you must consider the information contained in these resources.
If you printer software was installed before your upgrade, I try to uninstall the software completely and then reinstall it by using the most recent driver available on the HP Web site. Here's how to clean all the drivers of your computer.
I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Uninstalling the printer software - use as a rough guide, but the steps for Windows 8 should be pretty close to Windows 10.
You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available. (Once again Windows 8)
Software drivers can hide other places would be in your device manager.
To open Device Manager:
1) enter the Device Manager in the search field.
2) click on Device Manager.
(3) you can click on View, in the upper part of the windows, click Show hidden devices.
(4) to develop the types of devices and check for any pilot associated with your printer.
(5) to remove a device from Device Manager, click on the name of the device in the list and then click Uninstall.
For more information, see for Windows Device Manager information 8/10.
Download the newest software package here; Drivers and software features full printer e-all-in-one HP Deskjet 3520.
Or download the direct link here.
Then look for the updates of Windows; Drivers and software with Windows Update (Windows Update 10, 8)
Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.
I look forward to hear from you!
I have a Deskjet 3520 printer. I installed a new HP ink cartridges, color printing works fine, but the black does not print. Even if I force black only in the preferences to print gray nothing comes out. The print head moves back and looks like it's printing, but the page is empty. I also ran the cycle of cleaning heads.
My question seems to get fixed after I ran a printer 'clean' options available.
If you guys have this problem, why not try to clean?
I bought a new Deskjet 3520. I set it up on the wireless network, and everything seems fine. However, as I'm trying to implement Web Services, he told me always impossible to connect to the internet, it does not say why. I have the correct key in place, and everything else on the wireless can connect to the internet. I have uninstalled/reinstalled software... rebooted the router, restarted the printer, still no go.
I understand that you are not able to connect to web services. I would follow the steps below.
1. get the IP address of your printer.
2. Enter the printer's IP address in a browser.
3. Select the tab network at the top of the page.
4. on the left, select network.
5. Select Network (IP) address
6. select manual DNS server
a. manual Preferred DNS should read 188.8.131.52
b. alternate DNS server should read. 184.108.40.206
7. Select apply you could get a fair warning select OK.
Let me know how it goes.
My deskjet 3520 printer all in one is indicating an error OXCO260000 TRTHREADSTOP C on the display of the printer code. I was not able to find a solution for this.
Hello and welcome to the HP @Peachy2community.
I understand that you get an error message 'OXCO260000' on your HP Deskjet 3520. I'll be happy to help you.
Here is a link that will guide you through the troubleshooting steps for the error message you receive.
Please, try the steps and get back to me with the results.
If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.
I hope this helps. Have a great day.
The shop said it was compatible. However, the slot is smaller than the cartridge.
There are two printers with this number, but one is called the Deskjet 3520 e-all-in-one who takes ink 564.
The oldest 3520 takes ink 27.
I just replaced my 564 to 564XL black ink cartridge. I received a message that the cartridge has been installed correctly. but when I tried to print I got a blank page. When I looked inside the printer, I saw that inner right before the printer is filled with fresh touches of black ink.
I went on troubleshooting hp including cleaning printer head site and it did not help.
Welcome to the Forums of HP Support!
I understand that since the installation of a new black cartridge for your HP Deskjet 3520 e-all-in-one printer prints blank pages and you may have noticed some residue ink inside your machine. I would like to help you today to this question.
Now, residue of ink inside right of your machine is completely normal behavior. For more information on why this product please click here.
However, I'm concerned by the printing of blank pages. To begin troubleshooting can I please have you click here. When the support document opens can I please have cross you Solution three and four. This includes all sub-steps under two listed Solutions.
Please reply to this message with the result of your troubleshooting. Good luck!
Since upgrading to IOS 10 on my iPhone 6plus, when I add my printer (HP Deskjet 3520) as my connection in the settings to use remotely AIO to print/scan I get the error message "No internet connection" in the application of remote hpprinter AIO. My internet connection is on, the blue light for the internet is on but it connects to the printer because he thinks that the printer requires security for the internet. I tried uninstalling/reinstalling AIO remote and also refreshing to the Internet is done everything to nothing. Help would be very appreciated!
Well, after research through the forums, and not finding the correct information, I went to my router and found a setting "enable wireless isolation" which does not allow anyone on the network to see any other computer. Once I removed this setting, I solved all my last 6 months of frustration and not being able to print!
I just use the Software Support HP to install the drivers and software for my 3520 Deskjet on Windows 10.
At the end of the process, no software has been opened, there is no shortcut to the software available on the desktop and the printer is not available.
Windows 8.1, I could use the scanning and printing software that has been installed.
Are there instructions on how I can connect to my network printer?
Thank you very much for your answers!
Please have a look through this guide, scanning without HP (Windows 10) software.
Hope that answers your question and have a great day!
"Please click the Thumbs up icon below to thank me for having responded."
First day instaled deskjet 3520 printer all-in-one on the internet ok
Two days does not connect to the internet.
My internet connection is ok for my laptop and mobile
Thank you for the additional information. I was very surprised to see the number of disconnects the printer has had in the last 24 hours.
According to the information provided, I'm surmising that you stopped in step: evaluate the wireless network Test page according to the wireless network Test page you are correctly connected to your network. In this step you ask to change the change to your wireless router, you please begin at this stage and test wireless printing? If you are unable to print please continue with the remaining steps. For ease of reference, I have included a list of the document printer does not maintain the wireless connection again.
I installed the HP utility to scan from my HP Deskjet 3520 to my Mac Book pro, but the "edit scan tasks" button is grayed out. I can only scan one page at a time, but one I want to scan multiple pages
Thanks for the reply back @cjbd,
You are able to open the HP scanning software when you perform a search from the Mac?
You try to scan several pages from the printer to the Mac or from the HP scanning software?
You should be able to open the HP scanning software and edit everything from there.
Normally, you can select PDF to scan in a single file multiple documents if that's what you try to do.
Because this model only has a dish, you must be notified to scan another page.
Here is a document for digitization of the control panel of the printer: HP Deskjet 3520 e - all - in - one and HP Deskjet Ink Advantage 3520 e-all-in-One Printer Series - how to perform a scan: from the control panel.
If the HP scanning software does not work, you will need to uninstall and reinstall the software again.
I handed the document to uninstall: Printers HP - uninstalling the software of the printer (Mac).
Here is the link to the drivers: HP-inkjet ink-SW-OSX - Mavericks_v12.34.40.dmg
Please get back to me. Thank you!
Maybe you are looking for
For example: I was fill out a form on a Web site, I had never been to before, who asked for my e-mail address. After I had typed a few characters, a floating box appeared just below the form field, containing one of my e-addresses (similar to but not
Hello I would like to do an upgrade of the processor for my Tecra A11 i5 - 430 M 11N to a probably much faster i5 processor. I thought that the i5 - 580 M'd, but the laptop does not start when I installed this processor. I started the 430M, done some
Product name: HP 1000 Notebook PCOperating system: Microsoft Windows 7 (64-bit)I forgot my password for administrationAfter 3 attempts, it showsSystem disabled51294623Help out me.
Hello I recently added 6.0 on my other JDE and everything seemed fine that the project I had built a jar file. I could not however managed to sign. I used the same signature tool for jde 4.0.2 to 5.0 without problem so I'm a little confused on what i
I'm trying to embed a video in a JDialog box . Finally, I need to integrate three separate videos and so I implemented the functionality to define my own implementation of JFXPanel for re-use. I am able to run the application and when I debug in the