DeskJet 4535 & 1606dn laserjet: impossible to print some HP printable worksheets & impossible to remove the existing connected HP printer

Similar Questions

• A8 Tablet 5500: impossible to remove the shortcuts/icons

  Hello

  My tablet is new out of the box of a few hours.
  It is impossible to remove all the icons on the desktop: the tray does not appear!

  When I press a few seconds on an icon, I can move only but not remove it.

  I already have the update firmware and factory reset.
  It drives me crazy. I missed something?

  Your help would be greatly appreciated. Thank you.

  Thks for the answer.

  I used Lenovo Laucher... It's crazy that it doesn't work!

  I put the pitcher in the apex and it worked fine now.

• HP Deskjet 1050 (J410 series): impossible to install the software/driver of printer for laptop Windows 8

  Hi, I tried to connect my laptop (Windows 8.1-64-bit) on my printer (HP Deskjet 1050 all-in-One J410 series).  I tried to install the printer using the CD that came with it, but it shows a message "not compatible with this operating system". After reviewing previous questions here, I tried to download the software driver for this printer. None of these files have no effect with some presenting a message saying that the device must already be installed on the laptop for it to open. Anyone able to help?

  Thank you!

  Hello

  Please download the following installation package, save it on your computer (remember where) after this fight, click on the downloaded file and run as administrator.

  http://ftp.HP.com/pub/softlib/software12/COL32611/al-109412-3/DJ1050_J410_1313-1.exe

  Your printer has only USB connection:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c03775352/

  So ONLY plug the USB cord/cable when the installation process asking.

  Kind regards.

• Cannot run some programs after system restore to remove the virus

  Hello

  Toshiba my duaghter had a nasty virus that pretends to be an antivirus software product, which sneaked in, between the time his default service Norton has expired and I had the time to install Trend.

  Can not remove it using trend, so on the advice of a friend, decided to make a windows system restore to a point before the infection. It worked successfully and the virus has disappeared, but now she can't run some programs, I tried to reinstall Trend, but fails because he says you must first uninstall Norton. But I can't run Norton, or uninstall, and certain folders on C: are no longer accessible.

  I have to do a full restore of the Toshiba System (IE back tofactory settings? This seems a drastic measure, but the issue is beyond my meager knowledge of PC.

  Thank you

  Graeme

  Hey Buddy,

  Hmm... This announcement is a bit confusing... Maybe the programs you want to say were installed after the system restore point, who knows?

  In my opinion you must reset the laptop configuration that you have already written. This will restore the pre-installed Windows version where everything is working correctly and that all the drivers and tools are installed.

  Therefore, you only need the Toshiba Recovery disk and boot from it. This will restore the factory settings.

  Check this box!

• F4140 does not. Impossible to remove, the software says it is not installed, but then will not re - install

  The printer is not working so I want to remove and re-install, BUT the printer is not in Add/Remove Programs (I have XP).  I downloaded the complete installation package and tried uninstalling it, but the unistall program says that nothing is installed.  Then I tried to install it but it says that the software is already installed and does not settle anything. I'm really stuck this time.  I wish that HP had a "cleaner" uses, because obviously, the registry or something is out of sync.  Help, please!

  Hey there,

  Here's how you can uninstall it by using the brush that is built into the software. I've included the two options on how to access the cleaning brush. Simply choose which option is easiest for you.

  Option 1: From Original installation CD:

  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-64285-2&cc=us&DLC=en&LC=en&OS=228&product=3235310&sw_lang=
  10. run the download to reinstall the printer

  Option 2: If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-64285-2&cc=us&DLC=en&LC=en&OS=228&product=3235310&sw_lang=
  10. run the download to reinstall the printer

  I hope this helps!

  -Sean

• Impossible to remove the item from Windows Media Player

  Original title: Windows Media Player

  I downloaded some videos a few years ago and now I want to remove them from the PC and Windows Media Player. They seem to be linked to a web address for each video. When I remove them, they still appear an hour or two later. I can't get rid of them and I can't find them on my pc. How can I get rid of them?

  Thank you

  Dan

  Open WMP: -.

  1. Click Options on the Tools menu.
  2. Click the Privacy tab.
  3. Click on the clear history button to clear Windows Media Player's recently played files list.

  S.Sengupta Media Center MVP

• OfficeJet Pro 8710: Impossible to establish the wireless connection between my laptop and OfficeJet Pro 8710

  I'm tryng to connect wirelessly between my laptop and printer but I am unable to do so.

  My laptop finds the printer and when I go to add the device I invite me to "Enter the WPS PIN code for your printer". So, I printed out the Configuration Page of the network and it gives me the "wi - fi direct password", which I suppose is the password that is required to establish that it connection (I may be wrong in my explanation). However, when I type the password on my laptop it does not establish the connection. I said "try to add the printer again, or check with the manufacturer for addiitonal installation instructions.

  Any insght and assistance is greatly appreciated.

  Thank you.

  Hello

  You should searh for your wifi network at home and connect your printer and the laptop to the network. Direct WiFi option is really only for configurations that do not have a modem/router.

  You may need to disable the option Wireless directly on your printer to help the wireless configuration.

• Impossible to activate the wireless connection

  I have an Inspiron 1012 mini. A week ago, it worked fine and I was able to connect to the internet. Now I can't turn on wireless. Using Device Manager, I see that the Radio is enabled. However, when I use the network LOCAL utility, to toggle the checkbox is disabled and grayed out so that I can not change it. By the suggestions of the other forums, I tried fn/F2 but nothing happens. Is it a hardware problem with my wireless card, or is there something that I am missing?

  Gambler1,

  Sorry we could not find the exact cause of your problem. Please be careful when you download updates from Windows. Maybe one of them has caused some of the problem.

  Take care

  Rick

• Switched back to Fusion. Impossible to remove the icons from Parallels

  This is a repost. I was probably not word the subject well enough on the first post

  I use the Fusion user for 4 years now, but in order to satisfy my curiosity I looked into Parallels 8 to see what differences there are between it and the Fusion.

  Because I assumed two virtual machine programs work would present a problem I uninstalled Fusion and installed Parallels 8. Uninstallation of the merger was without incident, as the installation of Parallels 8. After using it for about two weeks, I decided that I would stay with Fusion since Parallels did give any real advantage in a world of Boot Camp.

  I followed the instructions for the elimination of Parallels in the side Mac and the tools of the side Windows. I then reinstalled merger. Everything was back to where it was before my tests, or so it seemed.

  I discovered some latency in the boot process, as well as garbage on the screen (at the start of Windows) that wasn't there before that I did my unfortunate test. I then dug deeper into the side Mac and searched all Parallels and found a lot of stray files that uninstalling seemed to have ignored or missed, ranging from the plists at hidden in the library folders. I carefully deleted only files that have been clearly identified as 'Parallels' files and folders. I tested the program VMWare Fusion and everything seems to work fine, but I've always had this nagging suspicion that everything was not as "clean" as it was before the test.

  Yesterday, I finally got fed up with the slow start of Windows 7 Pro and decided to look in the Windows registry. Boy, was I in for a surprise. There were more than 600 entries from channels that Parallels creeps in and through the Windows registry. Fortunately I am versed in regedit and quickly cleaned up the filth of Parallels. My MBP seems to boot properly.

  I'm having a small problem on Mac side that maybe you can help solve. In my taskbar, there is the BootCamp/VMware arrow. If I click on it, a drop down menu appears with the Parallels icon (see image)

  I can't, for the life of find me the file or the folder associated with this 'Parallels Desktop (Mac)"listed program. Behind the drop down menu is a list of all files that have the exact string "Parallels Desktop (Mac)" included in it. And now my question.

  What can I delete or change to rid myself of this icon and the list?

  For the record, I'm on a MBP (late 2008) 8 GB of RAM and using Boot Camp on an NTFS partition

  Click the Applications Menu Settings button under the drop-down list button in your screenshot.

  Click Clear Recent Applications.

• Impossible to extend the existing wi - fi with time capsule airport

  Hello

  I have one Capsule of airport TB 2 hung on an Ethernet in my study (lower level).

  I already have an existing wi - fi network to ISP modem/router to my media box provided at the top level.

  In addition, I have an Extender provided by the ISP of lower level.

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  I tried several times to do so, but either it freezes up or creates its own network despite the

  mode bridge as stated in Airport utility.

  Guide gently with the method or Protocol correct to put that in place.

  Thank you

  Jay

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  It sounds like you may try to extend the network of your "main" router wireless

  The time Capsule will not be able to extend wireless network if your 'main' router is also an Apple AirPort base station.  Or... in other words if your 'main' router is not an Apple product, then the time Capsule will not be able to extend wireless network.

  So, the first question to ask here would be... What is the number of brand and model of your router "main"?

  If you intend to leave the time Capsule connected to your main router with an Ethernet connection, the Capsule must have the maximum value of "create a wireless network.  If you use the same wireless network name and password using your 'main' router, Time Capsule will provide additional wireless coverage in the area where it is located.

• Impossible to access the existing wizard account settings change in IMAP?

  I cleared up the boxes - check for new messages at the beginning

                                                   Download messages every x minutes
  

  I clicked FILE - NEW - ACCOUNT E-MAIL EXISTING-

  but he comes to open the wizard, called "set email account in place."

  When Alternately, I open the server settings, which allows me to change the name of the server, username, and port but not Server Type.

  I suppose Hat I'm miss read the instructions or lack a step, or who have already obtained another wrong setting - help please?

  You do not change a POP, IMAP account (or vice versa) in Thunderbird (or any email client, in my experience). configure you a new instance of the account.

  If you set up the accounts in Thunderbird using POP and IMAP and to study their settings pages, you will see the differences that make non-interchangeable. Message stores are also very different, but it is not as obvious.

• Impossible to share the internet connection on the mac pro with the 5s iPhone book

  Hi, I use Internet on my mac pro book using ethernet

  I try to connect to internet on my iPhone 5 s using internet sharing. When I try to connect my iPhone using wifi it shows that there is an authentication failure

  Please help me solve the problem

  Thanks in advance

  Hi Hima8,

  If you are unable to get your iPhone to connect to a network Wi - Fi, the article below the link Details a number of troubleshooting steps that may help restore his ability to do.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network
  https://support.Apple.com/en-us/HT204051

  All my best.

• Satellite L505-13F - impossible to activate the wireless connection

  Hello, I have connectivity problems with my Satellite L505-13F.

  I can't turn on the wireless connection. I press Fn + F8 and nothing happens. The indicator at the bottom of the laptom turns on.

  I though this would be a problem with the drivers. I downloaded realtek wlan driver here [http://aps2.toshiba-tro.de/wlan/?page=downloads], but it has not installed correctly. Then I used the toshiba software installer, but yet again, nothing has changed. I have Windows 7 Home premium 64-bit.

  Device management, I have seen that I installed a wifi driver. (Realtek RTL8191SE Wirelless Lan...) So, what the problem is?

  Any suggestions?

  Hey,.

  Something happens if you press other keys FN or FN + F8 doesn't work only? Normally with this key combination you can enable/disable wireless network card.

  In addition, it would be interesting to know what happens if you are looking for WLAN networks. You see your WLAN router?

  If all the keys FN n t work, reinstall the package of added value and utility to Support Flash Cards. Otherwise, it could be another problem and you should reinstall the driver again and make sure the firewall isn't blocking the connection.

  See you soon

• Impossible to remove the program from the Control Panel,

  Cannot remove using Add/Remove program, to get mesasge: log file is invalid or damaged.  Using Windows XP

  Download and install Revo: http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html and use it to try to uninstall the program.  It often works when uninstall Windows is not.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to remove the notice of validation on the main screen XPpro

  Help! -J' still have the validation notice (of a previous installation) on the lower right corner of my screen. Not only it is annoying but it makes me think that the little problems I have are caused by debris from this facility.  I tried all the suggestions of M/S to remove and even erased my HD and re-installed a clean system disk. I tried to replace the product key (it doesn't).

  I am running Windows XP pro and wish to stay with it - can I fix this without recreating the entire system again?

  Thanks to everyone for all the suggestions.
  Rob

  Have you tried to activate Windows XP by phone
  http://support.Microsoft.com/kb/307890/en-us

  If the activation of the Internet does not work, then see the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 can be confused with the letter B, etc.).

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com