DeskJet 755 CM: 755 cm

Machine has two parallel ports on the top.   Can be used for tracing two computers?

The & #3; & #1; & #1; Designjet 755 cm has a parallel port single centronics and RS-232 serial port.  I personally suggest a JetDirect card and put the Tracker on the network.  I took these on eBay for < $ 20, delivery included. & #3; #2; & #1; #4;

Tags: HP Printers

Similar Questions

  • OptiPlex 755 w / HP 520 Deskjet Printer - cannot operate

    Hi, I have recently updated my Dell Optiplex 755 EnergySmart MT for Windows 7.0.  I have a HP Deskjet 520, c. 2000, I would like to be able to continue to use on the Optiplex 755 system - because he ran well on Windows XP and is still in good working condition - bought but I can't seem to find the necessary drivers.

    HP has stopped supporting this printer long ago.  I would be very interested in any suggestions that anyone might have to make it run on Windows 7.0.  When I plug the Deskjet 520 in the Optiplex 755, the printer turns on if the parallel port to connect without a doubt.

    Thank you.

    gef2014

    gef2014,

    When you have installed the operating system, have you installed the drivers in the correct order? How to download and install drivers in the correct order

    Windows 7 32-bit or 64-bit?

    What program anti-virus and firewall are you using?

    Is - this printer cable or wireless?

    This printer uses a usb port or a parallel port adapter?

    Rick

  • I got a repair for $755 Bill.  That it covers?

    For a 13-inch Macbook pro retina 2015.

    What does cover this $755 Bill?  He said absolutely nothing in my statement of repair.  Just lists the price and applicable taxes.  Leaves no room to leave me a message. Nothing.

    I find that the genius bar primary examinations States the problem.   Have you received such an assessment?

  • Windows 7, Optiplex 755... I downloaded Ffox, shows will not load error

    Trying to implement an OptiPlex 755, Windows 7. I can get IE work ok, but after downloading Firefox, it won't come to the top when I click the icon... gives me a message that says: I'm missing something. I'm about to give up Firefox, and I do not because I enjoyed using it for years. Could use your help.

    Be sure to mark where you think that the solution was the answer. He's going to place near the top of the page so people with the same problem can find easily.

  • EliteBook 755 g3: elitebook HDD

    Hello, I have installed on my Elitebook 755 g3 SSD and I want to update install a HARD drive for photos and movies (keeping all programs on the ssd).
    It is, I don't know what type of HARD drive I can install it on the laptop. 7mm or 9.5 mm? I think that 7mm because the laptop is very thin, but I couldn't find anything on the specifications.

    You're welcome, mate!

    No, a 9.5 mm disk fails in a small Bay. You can adapt a 7.0 mm in a Bay of 9.5, but the reverse is not possible.

  • virtual serial port? Vista 64-bit, usb, palm 755 p verizon dongle

    I have a new Vista 64 bit operating system and I'm having problems that everyone else is still.  Can't hotsync using the cable.  I bought the dongle bluetooth (Kensington) that many have said works.  My phone recognizes the PC.  My instructions on the phone that warm using bluetooth synchronization tells me to set up a virtual serial port.  The instructions are not very clear.  This is where it falls apart for me.  Can someone explain how to configure this virtual serial port?  Thank you.

    Well, I'm pleased to announce a successful solution.  On the recommendation of some other son that I left and piece and ioGear GBU321 Bluetooth USB key and Setup was a snap and it works (although SLOOOWLY compared to a connection cable, a while and plug your treo during your first sync).

    To setup you do the following (and this can also work for your Kensington):

    • Insert the driver CD
    • Insert the dongle when asked.
    • Install the drivers
    • Pair your device.  Basically, go to the configuration Bluetooth on the Palm screen and select "Trusted Devices".  You will find the bluetooth adapter, select it, and then the Palm or PC will provide or ask a pairing code.  The instructions will guide you through, but basically, you'll want to make sure that the same numbers are registered on both screens (this prevents you from accidentally pairing with some random near the computer)
    • This will actually set up your virtual port for you.
    • You can go to the hotsync Manager and click on "serial" and select the port created in the pairing process.
    • If you don't know which port has been created "Control Panels" and select "Phone and Modem" (assuming that you are in "Classic view").
    • Click on the modem tag and you will see something like 'Standard Modem over Bluetooth link' and next to that it will be the assigned port.

    I hope this helps.  I know that I was relieved not to have to trash my Palm or my PC (although when the Pre or iPhone with a physical keyboard comes out all bets are open)


    Message is about: Treo 755 p (Verizon)

  • Hard drive replacement for Satellite L750/755

    I would like to replace my existing HARD - 500GB, purchased with the portable L750/755 to the United Kingdom. Ideally I'd like a 1 TB drive. Can anyone advise on my options - should be a Toshiba or can I buy the other disks hard manufacturer?

    My current HARD drive is identified in the device as TOSHIBA MK5065GSXN Manager.

    Thanks in advance

    Toshiba HDD do not. I changed the original HDD with SSD and is not Toshiba.

  • Satellite L750/755 - no connection after Windows updates

    HI, I have a brand new L750/755. network card is atheros.

    There is no way to connect to the internet after you install updates to windows (85Mo, framework 3.5.1 security updates).

    Computer laptop will always find any accesspoints, but connect only with limited connectivity or no internet access.

    I had to restore the laptop before the updates installed to solve this problem.

    How can I work around this problem, or if not how can I get these updates to stop installing on close?

    Thanks in advance

    PS I had already tried installin the latest NIC drivers, change the power settings and connections to all other routers. nothing has worked.

    > I had to restore the laptop before the updates installed to solve this problem.
    Do this and after having done this only automatic disabling Windows update. When you manually do Windows update, install important updates only. Before you begin to update the optional check listed and disable updates updates of pilot.

  • Y510P issue of parameters power (SLI GT 755 m)

    The other day, I tried to play then on the battery and got terrible frame rates. I got the power settings on maximum Performance. Are there any other settings that I'm missing?

    Thank you

    -Phil

    Hi Phil,

    Computers portable high performance are not able to play on the battery. You see, between the processor 47w and even one 755 m to 50w, you look around 120w. Batteries are not capable of producing enough electricity for the game while on battery. If you want to game on battery, I recommend using the hd4600 pulling on the gpu bay ultra.

    P.S. I have the same model as you.

  • Current availability of housing Ultrabay Europe/Anything 755 M GT Y510P?

    I am really considering getting this laptop Y510p I feel it basically fits all my needs. http://www.NetAnttila.com/shop/M20/fi/NetAnttila/-Lenovo-IdeaPad-y510p-15-6-7419815

    Its price is good and the components aren't bad at all. However I will modernize the RAM and the HARD drive for a fee. Maybe the CPU later.

    The largest study in the present case however is obviously the ability to run 2 x GT 755 M graphics cards in SLI. Comparable this portable computer option (with the SLI). Becomes a very powerful, but very good machine market.

    The problem is. As others began in other threads (I read all). You can buy the ultrabay housing maps here: http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?...

    The thing is. I can't see it. Or elsewhere for that matter. Other members of the forums say just 2 months ago they sold for $90. I live in Europe, but whatever, it's. I can only find 2 of them on eBay for US $200 each. Including taxes, it's an insane amount and I do not know the sentence.

    There are other options in my country, of the Finland, to get one with the ultrabay card SLI therefore already included. But the problem is. The only site I can buy to (because of the need to use the partial payment) is the first link I posted.

    My question is. I probably get this laptop without the SLI. It is so possible to really the ultrabay card anywhere?

    Also the laptop in question comes with power 170W is not a problem. Thanks for all the information and opinions!

    Lenovo has reported that the Ultrabay cards are no longer available and have been abandoned. The initial price of the card was $249, so your option to buy a card may only on eBay or the portable version SLI.

    I guess if you decided to buy one month before, you would have been able to buy the Ultrabay card.

  • HP EliteBook 745/755/725 G3: Missing 'Label restore electronic tool' to fix the POST error boot in the BIOS 1.08

    The latest BIOS for the HP EliteBook 745/755/725 G3 made reference to a 'restoration tool electronic Label' to remove a MESSAGE error after flashing the BIOS to 1.08.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7815285&swItemId=ob_160552_1&swEnvOid=419...

    According to the release notes: "NOTE: for systems that do not comes with BIOS version 1.05 or later, this utility may be required if the BIOS has been updated.» Visit the page of the BIOS and drivers on www.support.hp.com and follow the instructions using the Restore tool from HP on the electronic label. »

    This tool can be found on the support Web site.

    If flashing the BIOS is causing this problem for systems shipped with a version of BIOS before 1.05 why is the tool not available to correct the problem?

    Better question is why was - this BIOS update published at all if it can cause a system to stop for 15 seconds during POST if you do not have the correction tool POST message as described in the release notes and the POST message?

    Version 1.01 of the electronic Label restore tool has fixed my problem.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_162255_1&lang=en&cc=us&hprpt_id=HPGL_ALERTS_1873677&JumpID=em_alerts_us-us_Mar16_xbu_all_all_641843_1873677_LaptopsandHybrids_routine__/

  • On an inactive touchpad on a laptop Toshiba L-755

    My computer is a month and a laptop Toshiba Satellite L-755. The touchpad stopped working after I stopped and restarted later. I installed a mouse into the USB port and it works very well. What can I check to see why the touchpad has stopped working? Could I have unconsciously done something to turn it off?

    Hello

    Try the system restore before that happened:

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    ---------------------------------------------------------------------------

    Check with support of the manufacturer system, documentation online or forums that there is probably
    Shortcut keys that enable and disable the touchpad functions.

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to install Windows XP Home SP2 to a Dell 755 Tower comes with Vista Business installed?

    OK guys,

    I aquried a used Dell 755 minitower that had wiped HARD drive, but originally shipped with Vista Business installed o/s. This computer still had the sticker code product key for Vista Business on the computer.

    I have a Windows XP Home SP2 OEM disc with a product code and tried to install it on this computer, but I get an protection windows with a blue screen error whenever I tried.

    I have a Vista Home OEM disk basic with its own key code product. The computer has allowed me to install this operating system, but not would allow me to use its product key code, but would allow me to use the old Vista Business key product code that was on the computer and complete the installation. Everything was fine, but I just don't like Vista o/s and I would like to install my OEM Windows XP Home SP2 to this computer and high grade it to SP3.

    In dealing with this computer, I discovered it would allow me to load Windows XP Pro just find, but I was using a copy borrowed this o/s and had to uninstall if I could return it to its owner. I also borrowed a copy of Windows 7 OEM I installed in this machine and it works just fine, but I had to uninstall it to return to its owner.

    I still want to know why I can't install Windows XP Home Edition for this machine.  Does anyone have information about this situation or a way to solve it?

    Btk (billy the kid)

    Looks like the drive you borrowed your friend had a SATA driver integrated into it.  What you can do, is go into the BIOS and change the AHCI to IDE mode.  This should allow you to install XP.  Or you could use a floppy disk and install the driver by pressing f6 during installation.

    Don't forget: OEM keys are related to the original motherboard enabled on.

  • If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

    If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

    "carlostorresWG" wrote in the new message: * e-mail address is removed from the privacy * _vista...
    If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?
     
    If the machine came originally with Vista, and you charged it with Win 7 disc by the same manufacturer, it will go into a grace period and the non-genuine end - the key used for this installation requires data appropriate to the SLIC table in BIOS in order to activate it.
  • Dell Optiplex 755 MT with Windows 7.0 NO SOUND

    Hi, I have recently updated my Dell Optiplex 755 EnergySmart MT for Windows 7.0.  I get no sound from the speakers.  Can someone please?

    The windows Vista Driver for X 86 or X 64 works fine in windows 7 or windows 8 or 8.1 windows you also need the AMT HECI drivers if the system has Vpro

    http://downloads.Dell.com/pages/drivers/OptiPlex-755.html

    http://downloads.Dell.com/audio/R164900.exe

    There are more recent files that you don't need to jump through hoops for.

    One size fits all.

    Operating systems

    Windows 7 32 bit

    Windows 7 64 bit

    Windows Vista 32-bit

    Windows Vista 64-bit

    Windows XP

    Windows XP x 64

    Chipset

    ftp.us.dell.com/.../R174616.exe

    HECI

    ftp.us.dell.com/.../Intel_AMT-HECI_A02_R255437.exe

    GROUND

    ftp.us.dell.com/.../Intel_AMT-SOL--LMS_A02_R255438.exe

    Installation of the drive (by WinZip) with the file Setup.exe to Intel_AMT - HECI_A02_R255437.exe

    Download

    1. click on download now to download the file.

    2. when the file download window appears, click Save (Windows XP

    users will click Save) this program to disk and click OK.  Save it in:

    window will appear.

    3. If you want to save in: field, click the arrow to the bottom, and then click on for

    Select desktop, and then click Save.  Download the file to your desktop.

    4. If the download complete window appears, click Close.  The file

    icon appears on your desktop.

    Install

    1 double click on the new icon on the desktop, titled Intel_AMT - HECI_A02_R255437.exe.

    2. the self-extracting window appears and prompts to extract or

    Unpack in C:\DELL\DRIVERS\R255437. Write down this path so the executable (I.e.

    You can later find Setup.exe file).

    3. the self-extractor file window appears.

    4. click on OK.

    5. After completing the file extraction, if the Self-Extractor

    window is still open, close it.

    6. click on the Start button, then run.

    7. type C:\DELL\DRIVERS\R255437 in the box text open, and then click OK.

    8. follow the on-screen installation instructions.

    Description Importance Version Published Supported OS Download
    Analog Devices ADI 198 x integrated HD Audio, v.6.10.x.5491, A02
    Analog Devices HD Audio driver
    Recommended 6.10.x.5491 27/09/2007 Windows Vista 64-bit
    Windows Vista 32-bit

Maybe you are looking for