DeskJet 932C, Windows 7, a red and green light on the machine will not work

Similar Questions

• Windows VISTA BIT missing Modules! Updates to the installer will not work.

  MY windows progam (and several other installation programs) will not work.  I went down to the BITS service does not.  I found several remedies that include restarting or re-configuration of the service.  However, when I try to start to change the service in the Control Panel, I get a message that the modules of BITS are not!  Can my BITS have been removed?

  Note: I had my living room PC to eliminate an infection particularly bad virud - perhaps they removed too?

  Pavillian Mediacenter HP with Windows Vista Edition Home Premium (x 32)

  Thank you, DRC

  Hi DCassie,

  1. Have you tried the 940520 full KB?

  If you have not completed the Ko 940520 try the full article and check if it works.

  If the article does not help then to recover a corrupt service, you will need to perform the repair installation of Windows vista and the Windows vista disc, you cannot perform repair installation.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Acer Aspire V - 123 Windows 8 keeps freezing and some keys on the keyboard are not working

  I'm currently using a netbook ACER ASPIRE V - 123 with Windows 8 as its operating system and it is not yet updated to 8.1.

  At first when my computer laptop while boots 'seems' to agree, and whenever I try to open a file without any content it took me about 30-45 seconds, opening a program would take me almost 45 seconds to a minute, and I think that something is not right with my laptop and when I try to open a website via my web browser and my laptop would just FREEZE and I can't do anything about it , but I hate to do HARD reset. And to add to this unfortunate scenario is that some of the keys on my keyboard are not working the letters like R, T, I, O and backspace and many others (which I don't remember exactly one by one).

  I try to read some forums on different sites and some posts to the community of MS and did several tests like starting in SAFE MODE w / NETWORKING and downloaded the software like MALWAREBYTES to find potential infections, but nothing found. I also did the start-up in MINIMAL MODE, but again, the situation was the same, but when I'm the boot without failure the filling and freezing are only decrease and I don't want always starts in mode safe.

  From now my laptop is booting in a start-up in MINIMAL MODE and I don't know what to do next, what to try next. I hope someone could lead me to the solution to this problem, I would be eternally GRATEFUL.

  Please do help me in a step by step process and if possible please guide me with pictures or screenshots because I prefer to learn things when I Visual effects on what to do.

  Thanks for patiently reading this post.

  -Raphael

  Hi Ben,

  Sorry for the late reply, the laptop has been fixed, it seems to be a hardware problem. We disconnected the connection of the keyboard to the laptop right now I use an external keyboard to type. Cannot afford now to buy and replace my laptop keyboard, the graphics card Driver has been updated also and I've reformatted the OS

  The gel did not appear more in the normal boot and if all goes well for work this way for good.

  Thanks for the information you have shared to me, he has also been a great help.

  until next time Ben!

  Best regards

  Raphael

• Toshiba 40L5441DG - Led shows red and green light

  My Toshiba 40L5441DG were now waiting for 72hrs, and the Led is showing red and green lights.
  I just bought 3 weeks ago... I need help pls.

  If I understand you right when you try to turn on your TV on the LED is green, but there is no pic, right?

• I am running windows 8.1 and lightroom 5.7. AutoPlay will not work... period even though my settings in Control Panel. Try DVD and opens in Lightroom only! Any thoughts?

  I am running windows 8.1 and lightroom 5.7. AutoPlay will not work... period even though my settings in Control Panel. Try DVD and opens in Lightroom only! Any thoughts?

  OK I tried. No configuration work at all. And it is a purchased the LR in a group, set current online copy! I am at a loss. While I love the edition is a computer after all and I think I'll have a bit of scrap Lr if I can't solve this problem.

• in windows movie maker, I made a film, but the disc will not play music, he worked before

  in windows movie maker, I made a film, but the disc will not play music of any other disk, in the past, I did what I do

  Hi Authorsz18,

  You are able to hear the music in the preview?

  Try to adjust the volume of an audio clip in the audio / music. And add music from the disc hard if you added songs to a DVD.
  1. right click on the audio clip > volume
  2 adjust the volume with the cursor.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-music-to-your-movie

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• Hi everyone, I have a downloaded version of Lightroom 5 (not the online version) and my tool bar to the right will not work. I can do everything but tools toolbar won't make any changes in the photos.

  Hi everyone, I have a downloaded version of Lightroom 5 (not the web-based version) and my tool bar to the right will not work. I can do everything but tools toolbar won't make any changes in the photos.

  Help is appreciated.

  Have a great day,

  Omar

  Hi Omar,.

  Could if it you please let me know are you not capable of working in the develop Module?

  Or is the Panel on the right in gray?

  Also could you please attach a screenshot.

  Kind regards

  Tanuj

• Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How can I uninstall the programs of the

  Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How do I uninstall the programs of the broken laptop and not running before installing on a new? Sincere friendships Fabian

  Hello

  If you have access to the machine, turn off Adobe CC applications by the signature of the application.

  Please see connect and disconnect to activate Cloud Creative applications

  Kind regards

  Sheena

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• 64-bit virtual machines will not work on the new computer running 64-bit Windows 8

  
  My new computer running 64-bit Windows 8. I installed WorkStation version 9 and the virtual machines have 64-bit operating systems will not work.

  have you turned on VT in the host system BIOS?

• Backward compatible? Can I write software in 2015 SP1 and expect it to work well in 2013 SP1? What are the features will not work?

  I need to set up some labview on my current computer software and run it on another computer in another country in a month. I was told that the computer I will eventually run from abroad Labiew 2013 SP1. I don't have a Labview on my computer today and thought I would setup the same SP1 version ito 2013 compatibility. However, it seems that this is not an option. When I go to download products my options are 2012, 2012 SP1, SP1 for 2014, 2015 and 2015 SP1.

  So what's the best move here? Can I install 2015 SP1 and wait that everything works ok when I go abroad? I guess not. Why 2013 SP1 is not an option for me? Should I see if guys abroad can upgrade to the latest version? What happens if they can't?

  Thank you

  Trevor

  As others said, the best option is to get the same version. If for some reason you cannot really, I suggest you get an older version, because then you can write the code in a newer version and backsave, there are at least two issues that may bite you if you are not well aware of how they work:

  1. If you have used the new features, they will not work in the old code. What you get in fact depends on the specific feature you are using.
  2. When you backsave, I'm sure that LV is a hierarchy save, which means, if you have screws located in the external files that are not vi.lib, it will create copies and you might have a more difficult time sorting out the dependencies.

  This occurs if you are using an older version, because the most recent version will simply open it.

• Digital satellite P200 (PSPBGA) - footprints and the webcam will not work on Windows 7

  I use a Satellite P200 (PSPBGA) and have upgraded from Vista to Windows 7 Ultimate 32 bit.

  However the Toshiba Fingerprint Utility and Web Chicony Camera Assistant Software both do not work. I checked and there is no new update on the Australian site.

  Can you please help me with these two questions?

  Hey Buddy,

  I think that in this case, you can't do anything. I mean Windows 7 isn't on the market yet and at the moment there no drivers available. You can only try the Vista drivers because most of them are also work on Windows 7.

  Alternative I founded on the Toshiba page we some drivers beta Windows 7. Maybe they work:
  http://www.CSD.Toshiba.com

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• WiFi on but green light on the airport is not

  I and Airport Extreme. WiFi works, but the green light is not lite. If I unplug or click the reset button, it flashes orange, and then darkens. I ran a diagnosis and everything he says is done, which is to use a unique name, use WPA2, connects automatically, etc.  Why the green light does not illuminate? Is it important because the WiFi is on?

  The Green LED has probably failed. As long as everything works OK, you can ignore the 'question '.

  However, if the airport is 4-5 years, it would be time to start thinking about a replacement... given that the average life of the airport lasts about 4-5 years.