Deskjet F350 all in one printer: deskjet F350 does not print

Similar Questions

• DeskJet F2280 all-in-one with Windows 7, does not analyze, was working fine

  I have an all-in-one Deskjet F2280 my operating system is Windows 7, everything was perfectly working until recently I went to scan a document and nothing happened, the power button blinks for about 30 seconds then stops. I deleted the driver and downloaded the driver date several times but always the same problem - full while downloading I get a fatal error Code 2203, I tried the solutions proposed on the HP troubleshooting page but always end upward with the same problem. I can print & copy perfectly. Please can someone help?

  Hello swallowsretreat

  When you mention that you have tried the HP troubleshooting page you were talking about article "fatal error" error 2203' (MSI 2203) displayed for HP Software Installation in Windows? ' " Otherwise I have suggestion follows first to try to resolve the first fatal error.

  Fatal error MSI message relates to the Microsoft Software install (MSI). As such they problem may be related to more that the software you are trying to install and be linked to the operating system.

  Let me know if you continue to receive the error when installing even after the rest of the article for fatal error 2203. Also have you tried to install the printer on another computer?

• All-in-one HP Officejet J4540 does not print my Quicken program pages

  The printer says it is printing and makes noises that's going to start, but does not take the paper and does not print anything.

  Hello

  1. the problem occurs only with program quicken?
  2. are you able to print from other programs?
  3. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Cannot print from Quicken
  http://Quicken.Intuit.com/support/help/printing/not-able-to-print-from-Quicken/GEN82237.html

• PhotoSmart 3210 All In One wireless network and does not know how to connect now lost.

  Hi, I have a 3210 all in one Photosmart, and I can't find it on the network more.

  I know that I've done worse of unistalling, reinstallation of the driver HP software and change the IP address of the printer. So I hope that someone can help me with this problem and return to the place where its still visible.

  I have a PC with XP and a Mac with OS 10

  Computers are both connected to the modem wireless cable router.

  The printer is connected to the router via ethernet.

  I can see the printer using a browser and entering the IP address of the printer. I can ping its IP address. The Mac can see the printer, but have installed the correct drivers to see (I think I can handle this, no need to worry about this yet).

  The problem is that I can't see it in the "Add a printer" Wizard on the PC. So I can't add it to the PC.

  I looked around the support of HP and they told me to uninstall the drivers and reinstall them. There was also mention of changing the IP address of the printer to a larger number, but that no longer works. So I went to the automatic assignment of an IP address to the address of the printer. And finally, I've seen mention to unplug the printer and by pressing 'ok' and 'Cancel' all plugging back in. He did a very long installation, but does not solve the problem.

  I searched the forums for a solution and can not find one - so I've exhausted all help (Ive been on the forums enough to know to search before posting a question).

  If Im not sure what to do next. Someone at - it suggestions? I don't really know what I can do to fix this problem: I'm sure it is just a corrupted file or bad setting somewhere I just do not know where he is.

  Thanks in advance for any help.

  Message edited by creeg on 30/09/2009 22:42

  For your Mac:

  If you're running Snow Leopard, the driver for the 3210 is compiled.  Open the applet Print & Fax under system preferences, then press [+] to add the printer.  For other versions of Mac OS, download the driver from here and run the installer.
   
  If you continue to have problems with the Mac, reset the printing system Mac and repeat the instructions above.  Information about resetting your Mac printing system can be found here (http://support.apple.com/kb/HT1341)

  For the PC:

  The 3210 is on the network, we will try to add the printer manually. First verify that you can access the printer's internal web page by accessing its IP address or host name.  You can find the IP address and the host name by printing the network configuration page.

  Here is the sequence of manual installation of the printer driver for XP:

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the host name of the printer. You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".

  
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Photosmart C6380 all-in-one: HP Solution Center does not work after update to the last version of Windows 10

  Printer worked flawlessly after upgrade to Windows 10. But with the last update, I can't scan more by HP Solution Center. I tried HP doctor and then remove and reinstall the software suite full, ensuring I have the latest drivers, but it still does not work. HP Solution Center is installed on my pc, I can even click on it and then it opens (briefly) and then closes, there is no way I can use the features. [However, doctor of HP, I could do an analysis of test and that worked, so there is nothing wrong with it.] Help...

  Hello

  Microsoft has since released a new update for this problem.

  Fix solution:

  Please download and install the following update KB3133431 from Microsoft:

  https://support.Microsoft.com/en-us/KB/3133431

  Note This update is available through Windows Update only. (Updates )  must be lit)

  1. Click the Start button, select 'Settings' and select 'Making day & security'
  2. Under "Windows Update", select "Advanced Options".
  3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• HP Photosmart C6280 all-in-one: HP Solution Center does not work. I can print but not scan

  I can't open the HP Solution Center to scan. When I try to open it I get a notification that all software is not installed. I ran Dr. scanning HP and all software installation downloaded and ran. Every thing is installed. Tried to open it to new and same result.

  Am going to the forum and found this update of windows 3132372 could be the problem. Checked and I do not have that update to uninstall.

  Because the HP Scan and Capture app can be a solution. Who has downloaded but it refused to detect my printer.

  I really need to solve this problem. I got nothing else problems with printing and scanning as Windows 10 came.

  A ran a uninstall and reinstalled (second time). It's working now.

• I have a G510n all-in-one Officejet wireless that does not print in Cyan.

  The cartridges are full, I cleaned the printheads several times, made all the diagnostic tests, restarted the computer, reinstalled the software and drivers.  I can't align the print heads because the scanner cannot see blue lines due to their not printing not.  The printer is out of warranty, so I need to know if I need to trash or is there another solution for this problem.  Following a forum, the person said it was chip problem, but did not specify how they fixed it.  Coult it will be the same question?  Any suggestions would be extremely useful.

  Thank you.  I called and you have a printer replacement for Iwould less pay at the store.  Simple and effective.  I appreciate the help.

• HP officejet 5510 all-in-one will copy but does not print documents from files-all controls don't say no problems found

  Print a document, but since I canceled the last few pages, I can't print anything.

  Hello

  ·         What operating system do you use?

  I suggest you to follow the steps in troubleshooting section below and check if it helps:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this helps

• All-in-one Officejet 6700 Premium does not work when a cartridge is empty

  On my officejet 6700 Premium, I have had trouble since the magenta cartridge was missing.  I'm unable to print even if you select using black only, it appears on the screen that gives me the choice to order or cancel, it gives also this pop up if I try to scan documents to save to my computer and even trying to fax.

  I am currently using Windows 7 Ultimate service pack 1

  I am at a loss on it and a plan to buy a cartridge, but in the meantime all that I need is to use black and also to scan documents.  Is there a way around this issue?

  I'm sorry that you are experiencing this issue.

  You will not be able to print WITHOUT this magenta cartridge. Some printers (older models) can print certain colors without another cartridge in the printer. The reason why it is not printing because this magenta blends in with all the other cartridges to perform a true black.

  So if it was another cartridge, it would give you the same error message and do not print.

• How can I remove ink jets if my all-in-one is broken and does not light?

  My hp officejet pro8600 than n911g was struck by lightning.  It will turn is no longer.  I used a new cord without result.  I need to remove the ink jets, I recently installed.  How can I access them without power?

  It is possible that the printer was not fried, but the power may need to be reset.  Watch this video for sure:

  http://h20621.www2.HP.com/video-gallery/us/en/customer-care/1245172417001/fixing-your-HP-printer-when-it-wont-turn-on-or-respond/video/

  If the printer is really fried, remove the front panel to access the cartridge Board and force it to the left.  Since you printer is not repairable, you lose nothing.

• All-in-one HP Officejet 4635: my HP Officejet 4635 all-in-one printer does not print since upgrading to Mac 10.10.1.

  All-in-one HP Officejet 4635 does not print since upgrading to Mac 10.10.1. Any suggestions? Thank you!!!

  Hi brenHP4630,

  You might want to try updating the driver for your specific operating system. You can find the download HERE.

• Inspiron one 2320 touch screen does not work

  I have all in one, my touch screen does not work. I have Windows 7 How do I work?

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19456063

  or by post to this community to get help.

• HP Deskjet 2540 all-in-one: HP Deskjet 2540 does not print

  I bought my printer a while ago and implemented so I could print wireless from my Mac. The other day I had to print some PDF documents and printed first, but the other two never printed. In the queue, it says "ready to print" and the two buttons wireless to the printer are turned on. It also does not print when I connect it to the USB port. But when I print the test page, which printed fine.

  Hey @bess-stanton1,.

  Welcome to the Forums of HP Support!

  I see that you have some problems with your machine printing Mac OSX 10.11 for the all-in-one printer Deskjet 2540. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Disconnect the USB cable if it is connected.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router.
  4. When the lights come back on the router, turn on the printer.
  5. Close any programs you have open.
  6. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  7. Hold down the CTRL key and click on an icon of your printer on the left.
  8. Click on reset printing system.
  9. Click the 'more' in the lower left corner.
  10. Select your printer from the list.
  11. Click in the box next to and select your printer from the list.
  12. Click on Add.

  Please let me know if you can print after you follow the above. If you can, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• DeskJet 2544: 2544 HP Deskjet all in one printer series No. CN4172BO1M

  Hi, I have a problem with my HP Deskjet 2544 printer all-in-one [personal information deleted], I experience a gray line through the text the two lines that makes text blurry and difficult to read.

  I cleaned and aligned the print heads, changed for a better print quality that has helped a little, but the line is still in the text, can you please advise.

  Hi @oldfeller1,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using an all-in-one printer HP Deskjet 2544 with a Windows Vista PC and printed text is blurry and difficult to read because of the grey lines through all the lines of the text of couple. I would like to help with that.

  Here is the document of support designed to be used with this type of problem - fixing poor print quality.

  Please let me know if that solves the problem, or if you need assistance.

• I have HP Deskjet 3050 a all-in-One Printer - J611g and need help with printing, please?

  I just bought the HP Deskjet 3050 all-in-one printer-J611g a. The manual has shown to do the printer double-sided printing odd pages then only print even pages only, and it works very well for one page on one side of the sheet. However, when I want to print two pages on one side of the paper and another of two pages on another aspect of the sheet, print the odd pages or even pages only just does not work! Ditto to print more than one PowerPoint presentation on one side of the page, if I click on print the odd pages only, then the printer will display the odd number of powerpoint slide instead of print odd number. I used to have another printer HP Officejet and never had any problems with two-sided printing. This printer comes with the function double-sided printeing at all?  If so, how can I do duplex printing?

  Thank you very much!

  This is a limitation of the software that you use and how the HP printers recognize the incoming files. When compress you multiple pages on a single "page" this page is actually two pages, with even and odd numbers. It is therefore difficult for the software to determine the page numbers 'odd' and 'even' when printing, because it is no longer applicable to the relevant pages, but the format in which they are being printed.

  I hope this information is useful!

• DeskJet 1050 - J410h: Installation 1050 A All in One Printer (J410h)

  Recently, I upgraded my laptop Windows 7 630 to 10 Windows, but when I want to reinstall my printer 1050, show that my laptop is not already compatible on my printer. Kindly advice me on how I can re - install my printer again. Thanks and hoping for your immediate answer.

  Marlon

  Hello

  Thank you for using the forum.

  Please download and install the FULL features software to win 10 from this link:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-1050a-all-in-one-printer-series-J410/5068679/model/5068684#Z7_3054ICK0K8UDA0AQC11TA930C7

  Hope that helps!