DeskJet F380 print only page 1 - only when the first powered

Similar Questions

• I have a C4480 printer, r prints only on the left side of the page, I use a MAC.

  I use a printer c4480, any text, I try to print, it prints only on the left side of the page, there is enough ink in the printer and the preview appears just fine. I am frustrated, I am trying to print a RESUME and need my printer for other things for College, any help is greatly appreciated, thank you.

  Looks like you kept the printer unused for a long time...

  Looks like you kept the printer unused for a long time...

  cartridges badly shot... He is not able to get permanent ink nozzles. He slowly gets ink nozzles. And it subside before arriving at the right side of the book... and then when cartridges move to the left. he receives little time ink comes to nozzles...

  Looks like you kept the printer unused for a long time...

  cartridges badly shot... He is not able to get permanent ink nozzles. He slowly gets ink nozzles. And it subside before arriving at the right side of the book... and then when cartridges move to the left. he receives little time ink comes to nozzles...

  Hey we can try a different cartridge. Check if this DEBRABANT... made me know

• DeskJet 3520 prints only in on runing window size 24 font 8.1?

  HP deskjet 3520 prints only in on the 24 font size. victory running 8.1

  The font size is controlled by the software print application that you use.  You change the font size in the software.

• HP Officejet 6210 All In One prints only on the left side of the page

  After good results, I tried to print a "retail Transaction" of Quickbooks account form twice with the same result:

  info. prints only on the extreme left, a straight line down...   I did adjust the paper tray.  What could be wrong?

  Thank you for your time and your advice.

  Texas-sleeper

  Salvation to the texas-sleeper,.

  I understand when you print from Quickbooks print right on the left side.

  I'll be happy to help you.

  In the program you are trying to print from, click file and then click on print. The print dialog box opens.
  Select your printer, click printer properties or properties.
  Click the paper/quality tab.
  In the press or type click on the dropdown menu, select the type of paper that matches the paper loaded in the paper feeder and the desired print quality, paper size, select the correct size of paper.

  Make sure that the appropriate paper size is also selected in Quickbooks software.

  Try printing a different file where this file is corrupted or damaged.

  I have provided a document of Quickbooks print does not correctly.

  Solve common printing problems.

  Try printing from another application to see if there a software problem with the printer or application you are printing from.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Good day!

• Hide the drop-down list when you print only when "PLEASE SELECT" is selected (unused field).

  Our form has several drop-down lists that by default the option "Choose", and not all of them are used whenever the form is used.  When we print a copy of each document, we would like the (unused) field "Choose" to disappear when printing - to make a copy of paper filter.  Is there a script for this?  I tried to use only the general framework ' Visible but does not print ", but of course, the field prints any - we need to print only when there was one another option as the default"Select"is selected.  Thanks in advance for your help.

  Coleen

  You can use a custom validation script, something like:

  Event.Target.Display = event.value = "choose"? display.noPrint: display.visible;

  To put this into effect, you will need to make a different choice and place it back to "choose." Another option would be to place as a custom Format script.

• Wireless printer prints only when it is plugged in power cord.

  Original title: printer

  I have a wireless printer and was working fine and then stopped printing, it will print only with the USB cord plugged. How can I make work with the USB cord.

  Hello

  What printer you are using?  What is you receive the exact error message?
  As many printers have specific installation instructions, I know that my HP needed me for not connect it first, and then click Print network opposed to USB settings then plugged into the USB port for installation and then just unplug the USB and WiFi, printing, once all installed and tested WiFi printing you can also print via USB , for me I could anyway.

  Just uninstall the driver and software and all re - install again.

  With printer (get the USB cable for the moment)

  To try this click Start > devices and printers > add a printer > add a network, wireless or Bluetooth printer > it will search a little, but I hope that your printer will display in the main window, if it is to highlight and click Next and follow the prompts to install the driver.

  You can check these sites

  http://www.printerhacks.com/How-do-i-make-my-printer-wireless/

  http://www.labnol.org/gadgets/make-wired-printer-wireless/12639/

• Place items only on the first page

  Hi Forum,

  I m wondering if I can place my library assets.item (0) only on the first page.

  Because the script below place assets in the library, when I click on a particular page...

  Instead, when I run the script, the assets must be placed on the first page...

  Is this possible... I tried this way... but does not work...

  PG = app.activeDocument.pages.item (0);

  myRect = pg.rectangles.add (); (I tested with the addition of rectangles on the first page, it works)

  var Lib = app.libraries [0] .assets [0] .placeAsset [pg] [0];

  Thanks for the help forum...

  Shil...
  

  need to select as you have already saved the obj in myObj

  var currDoc = app.activeDocument;

  var myObj = app.libraries [0] .assets [0] .placeAsset (currDoc) [0];

  myObj.move(currDoc.pages[0]);

• Calling a function only when the State is active

  I turn to find the event just to call a function only when the status is active. In fact, I created a State to display the 'product details' click and once the system changes to this State - I have to perform a function.
  
  Here's the context:
  
  Let's say that you are on the home page where you will need to click on a product to see details. By clicking on the product, the State to view the details of the product will be activated and a variable inside the new state you will receive all the data (from the class of product). But I discovered Flex run all States at the beginning and we need to watch how declare our function to make sure that we do not have a null to a variable/object reference. Given that value is moving to the State only when the click event to occur, the process of globalization, execution of all States at the beginning will not have any value yet (for the specific product to deal with in the State of the productDetails). So I can't use creationComplete to perform a simple function like setSpecs(), where all the values (for example, width, height, circumference, diameter, price, etc.) will be instiate specific labels.
  
  What event to use to call a function internal once we are in the State? Just using the creationComplet and stated if he check the currentState = that I have to work on is not enough. I tried 'activate', 'show', 'enterStage' and many others, but without success. I tried to search the Internet, but it seems that this problem is not popular enough to generate sufficient results.
  
  But I know that it is possible in the case otherwise it will be is not logical and since Flex work very well with the event, I found the right event. It's something basic I know, but when you do not know, it seems difficult to find! ;-))

  Thanks Greg!

  I agree, this is a better method. So I'll change my SENSITIVITY to use viewStack instead of the State. But the problem persists what that, if we use the viewStack State to launch an event only when the State/viewStack is displayed on the screen.

  I found something that works very well for me: updateComplete.

  First of all, I found this before reading your information about viewStack so it worked very well for the method of the State. That I decided to do a test to viewStack and made the necessary changes to the code to reflect a viewStack navigation and make sure the updateComplete was not within my component (stateProduct.mxml). The system was not able to view the specification as the setSpecs() function was not instantiate when displayed. I added the updateComplete = "{setSpecs ()} ' and everything worked great!" So I conclude that no matter if you are using a viewStack State, the updateComplete event can be used to run or functions only when the component is displayed on the screen.

  Now, I have to make my transition between the State working with viewStack effect! ;-))

  Thanks to Greg for this useful tip!

• Skype rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when having a Skype number?

  I reset my phone to factory settings and it works now.

• Skype number rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when with a Skype number?

  (Previously posted this in the Android subforum)

  I reset my phone to factory settings and it works now.

• Display shuts off and comes back only when the Satellite A210 is restarted

  Hello

  Satellite A210 display goes off in time and returns only when the computer is restarted.
  Duration usual DURATION 30 or 45 minutes

  Please advice
  # Is it a hardware or software problem?
  # Some other face same problem brings advice?

  The machine is a year and a half old runs windows vista Basic that comes with it.

  I reinstalled the drivers card display also the problem remains same

  Hello

  Have you tried an external monitor on the laptop?
  If the external monitor works fine, it seems to be a problem of internal display and must be replaced.

  You use the factory settings on your laptop computer or you have installed your own version of Windows? Before turning to an authorized service provider, you need to restore factory settings to determine if it s a hardware or software problem. With the factory settings, everything should work fine and if not, I think it s a hardware problem.

  Check this box!

• My Ipad charger charge my iphone 5s only when the phone is turned off

  Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

  Hey Bigfootinyourface,

  I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

  Identify the fakes or not certified lightning connector accessories
  https://support.Apple.com/en-us/HT204566

  See you soon!

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• HP Deskjet F380 printer shows "offline" and does not print.

  original title: have a HP Deskjet F380 printer stating 'offline' replaced new ink cartridge checked cable always in offline mode. Verified that the printer is not on the pause mode.

  Printer was working perfectly until I put in the new ink. Do check the cable (works well on a different printer). How can I get the printer to work again I'm using XP home. Checking the status of the printer and there is no tick etc. against the break point in the fax and Printers window.

  Hello

  Follow the steps in the link below and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=1128296#N71

• FM Radio has its out only when the screen of the phone is turned off

  FM Radio has its out only when the phone screen is turned off. Even for the speakers or headphones.

  I SOLVED!
  I had turned on 'Ok Google' and set it listening to "from any screen. Looks like Google to try and listen to all the time and blocks Radio FM output for headphones and speakers