DeskJet F4280 all-in-one: Deskjet F4280 print white

Similar Questions

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

  My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

  Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

  new PC using Windows 7 until recently.

  Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

  Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

  This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

  Gordon,

  Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

  then buy a new one.

  It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

  But don't thank you for the reply... even if it was a joke!

• 5742 HPOficejet e-all-in-one: retain default printer Fax and Photo paper tray

  Hello.

  The printer keeps failing for FAX and paper in the photo tray.  How can I fix this in windows Vista?

  Hello @Vanessa3,

  Welcome to the Forums of HP Support!

  I understand that when you print from your Windows Vista-based computer to your HP Officejet 5742 e-all-in-one printer the screen 'Fax' is popping up and the incorrect paper tray / support is selected. I would like to help you today to address these issues. If the "Send faxes" window appears only when you print to a specific program, there is probably a setting must be adjusted under this specific programme. If this is the case, what program are you a victim of problems when printing?  If the 'Send of Fax' window is popping up under all programs that you print from your computer, it is likely that the wrong printer is selected as the default printer in the printers and devices window. Can I please you follow the steps below to fix this problem.

  Set the default printer:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one. This printer should display a green check mark above to indicate that it is the default printer.
  4. If your Fax-HP Officejet 5742 e-all-in-one shows like check mark on this subject, please right click on HP Officejet 5742 e-all-in-one (printer) and left click on "default".

  Once the correct printer has been confirmed as the default printer please test print to confirm that the 'Fax' problem is solved.

  Once solve us the problem of Fax, we will be able to adjust your print settings to confirm that your printer is configured to print on the correct paper and with appropriate support tray.

  How to check the paper tray settings:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one
  4. Right click on the HP Officejet
  5. Left click on Printing Preferences
  6. On the paper/quality tab, make sure that the Paper Source is set to main tray
  7. Also, ensure that the media is set on plain white paper (if that's what you print on)
  8. Click apply and OK
  9. Close the Printers folder
  10. Try to print a document to confirm that your HP Officejet prints from the correct tray.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP psc 2115 all in one color not printing on Mac

  Hello

  I have a MacBook Pro, OSX 10.9.4. It prints very well on my HP psc 2115 all-in-one in black and white, but not color. I tried to find an update for the driver here, but nothing helps. Is it just that the printer is not compatible with my operating system, or is there something more I need to do?

  Thank you very much

  We gladly invite you.

  Try to reset the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Some Printers & Scanners.
  Right click (or Ctrl + left click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Once you have finished, click on the sign more and select the PSC 2115 list.

  Click on the drop down menu, then make sure the HP PSC 2110 is selected.

  Please let me know the results,

  Shlomi

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• Photosmart premium 3-all-in-one does not print black ink

  My C310 series 3-all-in-one hp photosmart print no black ink on the page.  The cartridge is new, and all ink cartridges are full.  The printer is 3 years, just one month out of warranty.  I downloaded all the updates, I'm sure and went to the website of hp troubleshooting page.  I followed all directions, twice and still no black printing.  Please help, I don't want to buy a new printer!

  Under Tools, I see only "Clean cartridges" not "clean print head."

  When I chose "Clean cartridges" twice, black ink printed!  Hooray! Once I have this post, hopefully get back to the page to say the problem is "solved"!

  Oh, while I have you on the line, while the cartridges were being cleaned, I got a message saying that I had to download the latest hp drivers, because those I have is not compatible with this version of Windows.  However, I download the latest drivers for 8.1 from your web site when I had a terrible paper jam.  After that I downloaded the latest drivers, this problem has been resolved.  But, given that I get this message re incompatibility, I need to re-download?  It was only a couple of weeks (up to three) that I downloaded the drivers.

  Thank you once again!

• HP 1315xi all in one will not print.

  Recently had to wipe my hard drive and reinstall everything.  I use Windows 7 (64-bit), and my all-in-one does not print anything from the computer.

  I downloaded the latest driver for the 1315 all in one series (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) from the Web site.  After that several unsuccessful attempts installation, following the troubleshooting guide, I was finally able to have it installed, but it still does not print.  It will scan and copy, but not reading as a printer.

  Help, please.

  Hello althor1170

  It seems to be a problem with the computer and the printer communicate with each other. Have you tried another USB cable or port? Have you tried setting the printer wireless or network? If he works on the network, then the problem is with the USB cable or port. You are using a USB hub?

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• -What is the HP Officejet 7310 all in one able to print wireless

  -What is the HP Officejet 7310 all in one able to print wireless

  What operating system?  If Windows and with the printer connected to the router via Ethernet, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  Message: Script error...

  OK if you use IE9 32-bit

  Latest version of the driver from HPupdate

  Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

  Hello borisgit,

  As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

  Script error when you try to print from Internet Explorer 9

• HP Deskjet 2540 All In One: Unable to print color?

  I have a Deskjet 2540 brand new all-in-One. Printer is delivered without any instruction manual. How to print color? I hit 'print' of my document and it comes out in black and white. When I type on the printer, the 'color' button, it draws just a piece of paper through the unit and nothing is displayed at all. I do not understand this crazy thing. My old printer didn't need me to tell it to print color or black and white, that he knew what was coming through the system. I'm about to make this thing.

  Thanks, actually it would print test print color, just not when I tried to get a print document in color. new printer, new cartridges. Change my selection of the printer of HP Deskjet 2540 2540 Deskjet series just seemed to settle, I don't know why. I just mention it here in case other Mac users have the same problem.

• HP Deskjet 3052 a e-all-in-one: update the printer software

  I have I already know the answer to this question, but I'll ask anyway.  I have a printer HP Deskjet 3052 J611G e-all-in-one has.  My computer is running Windows 7 Home Premium.   I want to upgrade to Windows 10, but the printer I have is not compatible.  I look for updated software for the printer but can't find anything whatsoever.  Is it possible to upgrade my printer software or am I condemned to buy a new printer?

  Thank you for your time

  Spoiler (Highlight to read)

   

   

  Hello

  Your printer is compatible with Windows 10. the drivers can be downloaded from this link:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050A-e-all-in-one-printer-series---J6/4311836/model/5061072

  Don't forget to click on the button to change, and then select Windows 10 in the selection of the BONE at the top.

  Shlomi

• DeskJet 3520 all-in-one does not print anything

  I have a 3520 Deskjet all in one printer model #SNPRH - 1102.  It is connected wireless to a HP Pavilion dv6 Notebook PC.  It is currently running Windows 7 Home Premium, and the system is 64-bit.  The printer is 2 years old and had been well until what a few months there working.  The warranty has expired.  Whenever I sent something to the printer, it seems it's going to print, but then he spits just blank pages.  I checked the cartridges of ink and even that she replaced with new ones (HP cartridges) but that did not help.  I made sure that there are no blockages in the cartridges, went through the cleaning process and still nothing.  It allows to print the internal test pages, but it is not scanner and re - print the test page.  I can't even make copies on this subject.

  I used all kinds of HP, troubleshooting, the doctor print and scan; I checked to make sure that it is connected to the network; I uninstalled and reinstalled the printer; I have updated software recommended by HP, uninstalled and reinstalled the software.  I also did troubleshooting of Windows and the only thing it came with was that Microsoft Teredo Tunneling adapter has a driver problem.   That this has something to do with the printer?

  I don't know what else to do.  Is the printer just trashed or is there a way to get it going again?  Maybe I just need to start over completely; I'm totally frustrated!  I hope I did everything correctly, but I'm not super tech savy, so any help would be greatly appreciated.  I can't really afford to get a new printer now.

  Thank you

  Print head of the Deskjet 3520 is not removable, a printer of replacement would be necessary. Even with the printhead being out of warranty, pay a replacement is available if you contact HP Technical Support team. It would be interesting to look into the options available for your printer.

• OfficeJet 6815 e All in One: 6815 Officejet print low quality on pc and high quality on devices

  Purchased a new HP Officejet 8615 e All in One and finally got it working after hours of shyte with unistalls and reinstalls. Now it works, but it prints documents with best quality of my laptop, iphone, ipad, and acer. From the pc, it prints out horribly. Downloaded a software/driver full features and always bad impressions from the pc.

  He is currently connected wireless. The printer test pages are all of good quality, all in colour. Scan doc says it all is green and works correctly.

  Obviously, there is something missing on my pc...

  Any ideas would be useful.

  THX

  Thanks for providing this information @MikeG7.

  Yes, it sounds like a driver problem. You should have a lot more options at your disposal.

  I checked online and the only available drivers are the base drivers. I suggest you update this driver to see if you have additional features that are available for the Windows XP computer.

  In the windows printers and faxes, right-click the printer and then click printer properties.

  Click the Advanced tab.

  Click new driver.

  Next.

  Select the HP Deskjet 990c printer, then continue the wizard.

  Apply the settings.

  Check the print settings and try them and print them out to see if the quality is improved.

  Keep me posted! Thank you!