DeskJet F4500 - no wireless connection. Help!

Similar Questions

• Windows 7 does not send print to deskjet 932c with parallel connection, help

  I got a new hard drive installed and old a cloned.  Now, I can not print to hp deskjet 932C printer in Windows 7. Printer is connected with a parallel cable. Has worked before but not after the hard drive cloning. Help

  1. There are two ports on the Deskjet 932.  One is for a parallel cable, it has a 25 pin plug on the end that connects to the computer and a PIN 34 taken to the side of the computer.  The other port is located right next to the parallel port.   This port uses a USB A - B cable, which is what you need.  The page here can help.

  I suggest the following:

  1. Buy a cable USB A - B, the right length (quite a long time to reach the computer to the printer.)
  2. Turn the printer off.
  3. Disconnect the current parallel cable to the printer and the computer.
  4. Turn on the printer.
  5. Connect the USB cable to the printer.
  6. Plug the other end of the USB cable to the computer.

  The page here can help.

• The configuration of the new MacBook Pro and HP C4780 wireless connectivity helps

  The MacBook Pro OS 10.6.3 so the CD that was included in the box of C4780 is should not be used.  I need to configure settings wireless in the printer.  Can I connect the printer via USB and it prints.  All the information that I have seen and read States to use the "Printer Setup Utility" for this, but I can't seem to find it.  All required HP software is upposed to be on the MAC under 10.6.  I'm relatively new to a MAC and I tried to look around to find the utility but don't have happen what it is.  The only utilities that I can find under 'Printers and faxes' and 'Options' for the C4780 are a number of requests for test pages, ink, supplies and other levels.  Can someone point out exactly where I find the Setup utility?

  OK, I did everything above, and does not now print.  I even reset the printer IP to the IP of origin just to try again and also now works.  My printing problem may have had more to do with resetting the print subsystem and then redefine the printer for the Mac.

  In any case, I'm now moving forward with other installation problems.  Thanks for the help and suggestions.

• Deskjet F335 wireless connectivity

  The Deskjet F335 has wireless connectivity?  If so, how can I connect to a wireless network?

  Sorry, it is not a wireless printer.  Some wireless routers have ports USB supported printers (like the Apple Airport series some D-link and Netgear routers as well).  That would be an option.  However none of these supports scanning, printing only.

• All-in-one HP Deskjet F4500 - how can I add a password to my wireless printer

  I just put a password on my router (netgear) so that my neighbors would stop stealing my signal. Since I added the password, I have not been able to print wireless. I have no problem printing if I have the usb cable connected to my laptop, but I need to be able to print wireless we have 4 laptops that use the same printer. Help, please!

  OS - Windows 7 (every 4 laptops)

  Acer Aspire 7560 Series / Acer Aspire 7741Z series / (2) Acer Aspire One 722 (Netbooks)

  Please let me know if you need more information.

  Hello

  While the USB is disconnected from the PC (if it was connected, make sure to restart your PC after disconnecting the cable).

  Follow the steps below to connect the printer to your network:

  Click Start > all programs > HP > HP Deskjet F4500 Series.

  You should see Add a device or reconfigure wireless connection.

  Follow the steps in choosing a wireless connection.

  You will be guided to temporary taking the USB to connect the printer to your network.

  Please let me know question ny,.

  Shlomi

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• HP Deskjet 3520: Wireless connection

  Recently, I changed my wifi network in my house and found that the printer cannot connect or recognize the new wifi network. I tried the reset of the printer to its default settings and turning the router and the printer power off and power on. I do not have a USB however, so this isn't an option for me.
  I am extremely confused with the way the printer is supposed to identify the wireless network and how I'm supposed to connect to another or where I'm supposed to type the password for the network.

  Any help gratefully received.

  Hi @Jillianne16,

  Welcome to the HP Forums!

  I noticed that you can not connect your HP Deskjet 3520 to your new wireless network. I'm happy to help you with this problem of connection!

  A few questions for you:

  1. What operating system do you use? If you do not know the operating system you are using, please visit this site. Whatsmyos.
  2. You are able to print a test page with your printer? Video: print a Test Page-HP Deskjet 3520 e-all-in-one printer. (That way we know that material the printer works properly.

  In the meantime, please see this message, How to connect a USB-wireless printer to a wireless network without PC, by @jason_h. If you do not have an iPad as indicated in this message, using your computer, open a web browser (for example, Firefox, Google Chrome etc.) and put the IP mentioned in this post in the address bar of the web browser. Then continue with the instructions in this post.

  Otherwise, if this post does not help to connect, I would very get a USB 2.0 printer cable at a local store. Once you have the cable, you can connect temporarily to your computer and convert a USB connection to a wireless connection, what could be easier.

  Hope this post will help and hope to hear from you soon!

• Unable to connect my printer (HP Deskjet 3052 a) wireless

  original title: wireless printer

  Purchase a printer HP Deskjet 3052 has and can't get my Toshiba Satellite phone so he could work. Will not work using the USB cable or wireless. Any Advisor. Downloaded the software and also used my cd, but the computer shows it's there, but when I go to print said I need to select the printer. When I do it does not help because it does not find.

  You have perhaps confused things by trying to connect with the USB connection or wireless.

  Subsequently, I guess you have a wireless router.  What is the make and model?
  Or are you simply trying to connect wireless to the printer WITHOUT a wireless connection between your computer and the Internet (i.e. without a wireless router)?

  If you click Start > devices and printers, do you (a) see an icon for the Deskjet printer, (b) see two icons for the Deskjet printer or (c) not see some icons for the Deskjet printer?

  Assuming that the answer is (a), right-click on the icon, select "Printer properties" and click on the "Ports" tab

  By ensuring NOT to click in the list of ports, use the scroll bar on the right side so that you can see the line with the box checked.  What he does say to the title of 'Port' and 'Description'?  You will have to perhaps to click and drag on the low vertical line in the header (between the word 'Port' and 'Description') in order to make the column wide enough to view the entire entry).  Click Cancel to exit the printer properties dialog box.

  Now, go to the printer.
  Print a Network Setup page:

  1. Press the wireless button to display the wireless Menu.
  2. In the wireless Menu, select print reports.
  3. Printing reports, select the menu Configuration.

  What is reported as the IP address of the printer?

  You can also print the wireless network test report:

  1. Press the wireless button to display the wireless Menu.
  2. In the wireless Menu, select print reports.
  3. In the printing of reports, select Test Wireless.

  The manual of your printer is not an example of these two reports, so I'm not sure what will be included.  On one or the other (if there are not two), it should show the name of your wireless network.  T it?

• How to print on a HP deskjet F4500 of a Chrome Chrome cloud wireless book?

  How to print on a HP deskjet F4500 of a Chrome Chrome cloud wireless book?

  Hello

  Follow the steps below to install Google Print delegating, be sure to follow the steps for a conventional printer as appropriate for your printer model:

  http://support.HP.com/us-en/document/c02817255

  Shlomi

• How to install the drivers for the hp deskjet F4500 wireless printer?

  Troubleshooting says I need to install a driver, my printer is offline and I am unable to do it online.

  He showed this: Hp color laserjetCp2025dn no driver and hp deskjet F4500 no pilot, said to install the drivers, but I don't know how to do this, any help is appreciated, thanks!

  Hello

  Check with HP, their drivers support and documentation online and ask in the Forums of HP.
  HP has excellent information on pilot facilities.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I need help setting up my new Xbox 360 on my wireless connection.

  can anyone help w / my xbox wireless connection

  original title: new edition of xbox 360 Wireless

  Hi SeanLynch,

  You can consult the following articles and check.

  Wireless Xbox LIVE

  http://support.Xbox.com/en-us/Xbox-Live/connecting/wireless

   

  How to configure settings on your Xbox 360 Wireless

  http://support.Microsoft.com/kb/908877

   

  How to connect an Xbox 360 Wireless network adapter

  http://support.Microsoft.com/kb/907330

  Let us know if it helps.

• DeskJet 3050 J610a - unexpected wireless connection problem.

  Running:

  10.7.4 MacOSX

  HP software: HP_Lion_Ink_SW_v12.13.17

  Printers: Deskjet 3050 J610a worked perfectly via a wireless connection

  MacBook5, 1 Intel Core 2 Duo, while I had been with HP Software HP_Installer_DJF4100_v9.7.1, which has been * no * intended for this printer, but I was able to "ADD" the printer Deskjet 3050 through preferences system, through the HP Socket,

  [Recklessly] looking for a more "functional" configuration, I looked at HP support and found that a specific software was released for computers running "Lion".

  So I uninstalled the previous DJF4100 software, restarted the computer and installed the new software and drivers for Lion as described above.

  Now the printer Deskjet 3050 J610a appears in the network of the computer under "devices" as

  "HPJ610a.047DED", Type: computer network computer. It is also detected with.

  ' Security: no ', while my Wi - Fi throughout the House network is encrypted with WPA/WPA2 Personal.

  I could of course decline on the previous software and configuration, but before that I would like to understand why this new software, which was released by HP for Mac computers running Lion behaves in such a way, why does the printer as a standalone device (which she has never done it before).

  As I said, before I regress to the previous configuration, using a software program that initially is not required by the printer or by the operating system, I greet all the information and suggestions.

  I need the wireless connection!

  Thanks in advance.

  Okay, well, I think that a different router can only solve this problem dead.  Consider an Apple Airport Terminal.

  If you connect your Mac on the network 'JPJ610a.047DED', this is a direct link between your Mac and printer wireless (not involving only the D-link).  So, naturally, you shouldn't be able to get on the Internet with this arrangement.a

  When you run the HP software (Finder - go to Applications-> HP-> -> printer software installation &) it will allow you to connect your printer directly to your network with the temporary use of a USB cable.  He who does not?

• Need help with Photosmart C4795 Wireless Connection

  What I have: HP Photosmart C4795

  What I use: Macbook OSX 10.9.5, wireless network with WEP security, running, I'm not sure if I have WPS or not (don't know how to say or use it)

  Problem: I used it as a wireless printer without problem for the past five years.  Recently, I moved and cannot find out how to configure the wireless connection.  USB connection works fine.  I still have the installation software, and as far as I can tell, it is updated (I'm not positive however.)  When I run the HP Installation Wizard, I've got to the point where I select "Set up for wireless" and the HP installation wizard crashes every time.  I scoured the forums and have found conflicting advice about this problem.  Someone please give me a clear answer. is there something I can do to get the job of wireless or no wireless capability is no longer works with Mac OS x 10.8 or superior?

  Ah ha! I thought about it.  For anyone who uses an ATT Uverse router, maybe that's your problem.  My router is a NVG589 of Arris.  I don't know about other routers, but I guess that's the same thing.  These routers are capable of WPS, but their default settings have the WPS is off.

  You have to

  1 access to the properties of your router via a web browser (Safari, Internet Exploere, Firefox, Google Chrome, etc.) to the address http://192.168.1.254/mdc
  "2 click on 'Edit your settings or wireless security'", you will need the code printed at the bottom of your router.
  3. turn on the 'Wireless Protected Setup (WPS)'

  From there, you should be able to follow the Setup instructions for printers WPS enabled found here: http://support.hp.com/us-en/document/c02273853

  This next set of instructions is specifically for anyone who has a Mac and running the version OS x 10.9 or higher.  (If you don't know how to check this, click on the apple icon in the upper left corner of your screen.  Select "About this Mac" a box will appear with the information of OS x).

  Select Mac OS X.

  Select the third option OSX v10.10 Yosemite, Mavericks Xv10.9 OS and OS X v10.9 Mountain Lion.

  Select Option 1: Wireless Installation (EVEN IF YOU ALREADY HAVE IT CONNECTED VIA USB.)

  Skip the second step and proceed directly to step three.

  Select the second method: install the software using Apple software updates

  Follow the instructions for the method of the push button.

  I hope this helps for those who had as many problems as me!

• HP Deskjet 3050 a J611 is no longer can scan over a wireless connection

  HP Deskjet 3050 has J611; Windows 7

  Without having to install new updates - printer is< 2="" months="" old,="" the="" option="" to="" wirelessly="" connect="" to="" the="" scanner="" and="" other="" options="" disappeared.=""  scan="" and="" other="" options="" available="" when="" connected="" via="" usb.=""  wireless="" scan="" was="" working="" fine="" since="" the="" printer="" was="" purchased.=""  scan="" connection="" disapeared="" on="" a="" day="" when="" i="" had="" already="" used="" the="" wireless="">

  I've seen this question discussed on some forums without any specific problem other than to plug it in USB - which is a workaround and not an acceptable answer.

  Patches or fixes for this issue?

  Thank you

  JML

  Log in to the router to make sure it has the latest firmware.

  If this does not work, uninstall the HP software (using the uninstall program in the HP folder), restart your PC, then download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.