DeskJet t1200: jury of trainer T1200

Similar Questions

• DesignJet T1200

  Hello
  My HP DJ T1200 displays white screen with LED lights I format and therefore does not work, there is t he not choice to replace the trainer?
  Thank you for your help.

  Hello

  With the wide printer, take out the trainer, remove the battery for 5 min and reinstall. It works sometimes.

  If possible, share the status of the 3 leds on the trainer.

  The issue could be the trainer or the APC's hand. The Leds on the trainer can tell you what part is faling

  Best regards

  Mike G

• Designjet t1200 MFP: length Maximum of t1200 printer paper?

  "We're trying to print a poster of long (150 '') on our T1200 but when we enter the length and width (150 ' x 36') he continues to change the 150 to 129 ', which is in the box greyed out under the length of the custom paper box.

  The maximum length we can print on a T1200 is 129' or is there a way around this?  I read the manual, but it does not say what the maximum length of paper that you can configure in the menu custom.  At least, I didn't see it anywhere.

  Also, I downloaded the driver to my computer earlier, just to see if the latest driver could have corrected it, and it's the same thing: gray area below the custom length box that says: "5.51 - 129.00.

  Hard to believe that HP would put an arbitrary restriction on the length of the paper you can print on.  There must be a work around.

  Thanks Mike.  Tried a couple of things and finally decided to use the 5500PS driver.  Works like a charm.   Maximum length is now 150 feet!

  Mike, could you print past the 129 "max limit the driver t1300?

  Only downside, is that it there is no roll selection on the 5500, since it is a single roller machine the the t1200 is double rolls.  It comes default roll 1.  But for the banner occasionally use of impression, it will work very well.  The rest of the time, we can use the original driver T1200 and not lose the roll option.

  So now I use the driver of 5500 on a 1055 C and a T1200, as a 5500PS.  A versatile driver I would say!

• HP Designjet T1200 PostScript: during the t1200 firmware update file

  I tried several times from several systems to download the update of the firmware:

  TT6 - TTAJ_08_02_03.3_mvl40 - x 86 - opt_B.fmw

  Downloads of files consistantly with a 467 720 KB file size.

  "The process of updating the firmware has not been successful. The file you have selected may not be good, or the problem may be due to a transmission error. »

  1. How can you contact HP for updating the firmware file.

  2. other solutions?

  Hello

  Did you try to contact HP and get another FW file?

  Best regards

  Mike G

• Designjet T1200 HD-MFP: Designjet T1200 Scanner

  Hi all

  Im having a problem with the scanner pc not find and connect to the scanner. Have checked connections, turned off both scanner and pc, son of the late disconnected, powered by scanner and pc upward and reconnected the son of fire. Used the two ports of wire before the scanner. Re-scanned dozens of times, and the pc scanner won't scan. Even went as far as using the system recovery disk, still no dice.

  I see that the manual recommends to replace the interface board and the interface cable. Although I have found no part number for the interface cable, at least than the average fire wire cable. Any input would be greatly appreciated.

  Thank you!!

  Hello

  Yes, you will look at a problem with the cable or a firewire interface card. In some cases, the problem could be the APC of the PPC hand.

• Where can I find the download of the base for a HP Deskjet D4260 printer driver?

  Where can I find the download of the base for a HP deskjet D4260 printer driver? I have a new Windows 8 tablet running, and the only thing I can find is downloadable for the complete software suite.  References from the HP website they have a base driver download but you don't tell where.  Search all of lead them to the download of the complete suite.

  Hello eworth3,

  I followed on the specific page for this driver and found the same thing - my apologies that there is not a link on this page for basic training.  I did a search on the site hp.com for this text and it took me to a page that has the base driver... I have included the link below.  This is the basic feature software solution and is a driver software intended only to users who want a basic print and driver scanning for use with their device from HP all-in-one.

  Thank you for that bring to our attention: I would ask to add the link to the specific page.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109012-2 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0001

• HPC88C0D HP Deskjet 2545: Code/email address incorrect for the HPC88C0D (HP Deskjet 2545

  Sorry to bother you - read the instructions about the cancellation/deletion of the code 'web services' printer, one used for e-print?

  All the instructions are for printers equipped with screens etc. (This little 2545 model HPC88C0D... has about 5 buttons, display a) number of copies, b) the question of if a WiFi on/off/connection, and that's it?

  Discovered by pressing combinations of these a few buttons, surprising the achievable results, but what combination to actually delete the code... no idea. I can't turn it power and half of a train of ithat page "initial Setup" same... with the same code.

  Hello

  What code you related to?

  The HP Deskjet 2545 model does not support the ePrint feature, so there is no code available for this model application.

  Can designate you the Direct wireless printing code while pressing the button wireless Direct for 30 seconds? It is a different code then the one that you see and supposed to allow for conencting the printer without a router...

  Please clarify if I may have misunderstood your intent.

  You can find the specifications of printing capabilities Mobile below:

  http://support.HP.com/us-en/document/c03811750

  Shlomi

• Trainer new installation & hdd to t790 - serious problems

  I bought a Designjet t790 (very cheap) opportunity, and for some reason, the seller does not give me the trainer on board with the printer. Without the printer formatter showed error 08:11 - "no communication between the product and the touch control panel. So I studied a bit and bought a new Board of the trainer.

  I read somewhere that the hard drive is optional and not necessary for printing - it is false, no? Insert the trainer jury diskless hard gives error 08:11 even once, after been slain with '1% initializing' minutes. I had to buy a new hard drive with firmware - separately the parties have now cost more than the printer itself.

  With the new drive hard attached to the Council of the trainer, the initializattion Gets a little further, to 20 percent. Then I get a new error: 01.0:10 - 'Communication with engine APC failed.' If I leave it for a few minutes, error passes to 08:04 - touchscreen communication is lost.

  Now, I have to buy another part?

  Touch lights comes on after 6 seconds of market, but no matter what combination of keys does not seem to work. The touch of the screen seems to work as I can scroll the error screen.

  EDIT: Touch keys should work - when I press cancel, home and help at the start, the lights blink a few times as a confirmation. Nothing happens after that, it will similarly during initialization 20%, then 01.0:10 error.

  The power supply light is and remains lit, but the button itself does not seem work - the only way to stop this thing is with the main switch from 1/0 to the back, next to the power cable. When I turn the 1/0 button, the printer turns on instantly.

  Thanks for the help everyone! After fighting a few more months with this, I got a new card of mother and who sets the printer.

• Can PCI 6602:How I use digital lines of the Board of Directors and at the same time to generate trains of pulses by using a meter?

  Hello!

  My problem appeared when I tried to update my traditional NOR-DAQ legacy code to DAQmx.

  I use 2 meter (meter 5 and 7 meter) on PCI-6602, to generate trains of pulses, as well as the lines of e/s digital port 0 (the form lines from 0 to 7). What I do in my request, it's that I'm starting to generate the pulse train on the output of 2 meters and after that I play with the State of digital lines.

  Traditional, it was no problem to use the meters and digital lines at the same time, everything went perfectly, but in DAQmx, is not possible.

  What's happening: I start generating train of pulses on the output of counters, no errors, but when I try to change the State of a line of digital port the generation of the pulse train is stopped. What happens when I start the task associated with the digital way.

  My question is: is it possible to create a channel on digital lines without changing the channels created for meters?

  Another thing that I managed to do with the panels 'Measurement and Automation Explorer' and Test for PCI-6602, is basically the same thing, I generate trains of pulses on the output of the 7 meter and try to start a job on the digital line, but I get an error:

  "Error-200022 occurred in test Panel.
  Possible reasons:
  Measurements: Resource requested by this task has already been reserved by another task.
  Device: Dev4
  "Terminal: PFI8.

  On the contrary if I use the counter 0 or a counter 1 to generate trains of pulses I encounter the same problem.

  What resources are used by 2 to 7 of the PCI-6602 card counters and the counters to 0 and 1 do not use?

  Thanks in advance for any answer!

  Ciprian

  After doing some real tests on this device, I found that it is a normal behavior for the jury of 6602.  This is because when you start a task digital all 32 lines are configured for digital i/o, so it replaces your meter operation.  The article below the link explains a little more on this subject.  You must start the digital task before the task of counter to use the features of both in your program.

  2 meter and above will not work correctly when you perform digital i/o on NI 6601 or 6602

  http://digital.NI.com/public.nsf/allkb/43F71527765EEC3886256E93006CD00C?OpenDocument

• Counter/Timer Pulse Train generation

  Hello

  I'm having some difficulty to understand why a particular VI I does not work (upper part of the image below), I was wondering if someone could give me an idea of the cause of the error message.  I have a counter/timer, which I use to generate a pulse train.  It works very well on samples of "continuous", but when I turn it on to 'finished samples' I get an error of "resource is reserved" when it comes to the DAQmx VI of 'play '.

  I made an another VI (lower part of the image) and it works very well with finished samples.  So basically I wonder what's different on finishes versus continuous sampling which could cause a resource to book or not. (the Board of Directors is a PXI-6281 if it matters)

  Thank you

  Adam

  

  OK, I just looked through the manual and it seems that when you do a finish on a counter pulse train generation, the jury must in fact to divert the OTHER counter.

  This may have been aparent earlier if the error message about what resources he tried to get was more prolific.

  In any case, problem solved I guess.

• ink advantage Deskjet 3545: como hacer reseteo fabrica one advantage more deskjet ink 3545

  Hola soy nuevo in esto, espero explain well as sucede lo...

  Tengo a problema grabe, a few months ago compre una hp deskjet ink advantage more ago 3545 y estaba muy running good pero UN dia appeared as habia una change para the more there is the instale, the apague y sigueinte al dia as the encendi para volver has utilizarla me pidio me entirely than tubiera hojas blancas y pressure ok.

  Al hacer eso in the pantalla Patrick appears 'imprimiendo pagina alineacion '...  Pero no sales of esa pantalla, apago the Patrick, the return a prender y sigue el mismo message... I can print directly from the computadora apesar of than esta ese message, pero no puedo sacar form y escanner funcionar dejo el no works directly from the Patrick y tampoco dandole the orden del ordenador.

  "" probe are con quitarle corriente mientras esta burning y a tiempo conectarla pero el message again after no tambien is quita ' imprimiendo pagina alineacion "don't use the hp tool para problemas did y no soluciona nada, the change that instalo resultó danar el equipo.

  Quisiera saber training of back values of fabrica (factory reset) para dejarla como estaba cuando the Sin understand the change that descargo e instalo, there is that no me permite hacer nada, no el menu Escalin Patrick aprece ago I never print alineacion hoja already. está inutilizable the more.

  Hi @crisruel,

  Welcome to the HP Consumer Forum English!

  If you post your question in the language of your choice, please use the following link to do so;

  English: http://h30434.www3.hp.com

  Spanish: http://h30467.www3.hp.com

  French: http://h30478.www3.hp.com

  Portuguese: http://h30487.www3.hp.com

  German: http://h30492.www3.hp.com

  Korean: http://h30491.www3.hp.com/t5/community/communitypage

  Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage

  Otherwise, feel free to post a message in English. Thank you and have a great day!

• HP has solved the problem of trainer P2015.

  Gentlemen.

  In my company we have over 100 P2015s. Many die because of the problem of well known trainer. These units are no longer under warranty. We decided to buy about 50 trainers to fix these, but until we do - new trainers will be redesigned advice? (I hear they discovered the circuit which caused the problem).

  Thank you

  COD

  This may sound crazy, but our p 2015dn had the same problem until I cooked the trainer as jury said on another forum.  I deleted the Board of Directors of the printer does not work, dissolving the plastic on the right tape/coating, then preheat the oven to 350f, place the Board on three balls of foil on a cookie sheet, let Cook for 8 minutes exactly, removed and let cool and then installed and have now a printer to work again!  Try this with a bad formatter board - what do you have to lose.  May be a low soldier joint in the manufacturing process. But I have worked for me.

• DeskJet 1050 in europe - compatibility of ink with us

  Hi, having recently moved back to the United States of Europe I had to realize that my HP printers (from the Germany and United Kingdom) do not accept ink cartridges HP United States-have sold. Althouth I chose the correct cartridge for HP deskjet 1050 j410a type, the printer LED were continues to flash red. A brief search on the internet showed that HP just en-coded all printers so that you virtue use cartridges of the country have purchased printers.

  However, it seams to be the way to change the code of the printer so that it sells US HP cartridges will accept. Can anyone help? I have a HP Deskjet 1050 entry level and a high C8081 of range and I don't want to lose them either.

  Any help will be appreciated.

  I may be able to help, I'll send you a private message asking some details.

  For others with the same question, you will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Not all agents are trained in this procedure, if you talk to the agent is not able to perform the procedure ask to speak to a supervisor and then ask 'regionalization Reset. "   Webpage of HP on the subject is here.

• 10 Photoshop do not print to HP Deskjet 9650

  My computer is running Win 7-64.  There are 96 GB of free space on the C drive. This is a new computer with the HP 9650 connected for the first time.

  Printing on HP Deskjet 9650 will not work for Photoshop.  Printing on a HP Deskjet 970 works.

  HP 9650 is connected with a USB cable.  A test page printed tool box print as expected.  Windows Photo Viewer printing.

  Print the same document printed successfully using Windows Photo Viewer does not Adobe Photoshop Elements 10.  Attempts to print from MS Word documents (MS Office 2010), Adobe pdf viewer, Fire Fox, or Windows Internet Explorer will not work.

  The power light on the HP 9650 flashes seem to indicate that the print job is being processed. But printing never occurs. Sometimes "Photoshop Elements print: does not" appears.  Other times, as no error message appears on the computer screen.  Other programs mentioned above do not display an error message.

  After several minutes, the power light is on balance and the resume light starts to blink on and outside balance. By pressing the switch lighting summary does not alter.

  The HP 9650 printer manual talks about the meaning of the combination of light-market summary-light-flashing and stable.  I think that it is easy to remove the printer is waiting for a special support dry plain paper is used, and this same medium has been used successfully printed from Windows Photo Viewer. Printer is not paper. Print job was not a banner, stall I/O is considered to be not a problem because the printed test page and a document can be printed in Windows Photo Viewer. Even if the printer set up page has been configured for "Automatic" tray selection, manual loading of back was without change.  This seems to eliminate the printer wait for a load manual feeder.

  The foregoing leaves only a 'media mismatch' problem according to manual printers. I have exceeded tens of settings printer page times and find no inconsistency of media.  If there is an incompatibility of media probably would be present when you print the document within Windows Photo Viewer.

  Hello! Because the in that forum you posted is for beginners by train to learn the basics of Photoshop, I moved your question about Photoshop Elements forum, where you can get a more specialized help.

• Can I get training on site for my employees?

  I have a team of employees who are not the right users of our devices iPhone Mobile 6.  Most simply use their phones as phones (phone/e-mail-mail/text and the occasional photo).

  Ideally, I would like to have a trainer come to our national sales and make a training session with them:

  This course (or a version of it for about 50 vendors) would be perfect, I think.

  iPhone Basics (in English)

  New to iPhone? This workshop is a great way to learn about the new features and pick up some tips, tricks and practices.

  Is this possible?  Anyone know who I would contact to get there?

  THX

  You can contact your local Apple store and ask them

  In my view, there are also 3 parties that could help you with this