Desktop blackBerry Smartphones software

I am away from home and have neglected to put office software preconfigured for my Curve 8330 on my laptop.  When I go to the BB download page nothing jumps on me and said of desktop software preconfigured for Curve 8330.  Does anyone know what version of the software should I use?

Here is the link to the desktop software

http://NA.BlackBerry.com/eng/services/desktop/

Here is the link to the OS software just in case you need it too.

http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads

Tags: BlackBerry Smartphones

Similar Questions

  • Update on 9360 bb curve blackBerry Smartphones software

    Hello

    my phone needed to update the software so I chose for her to do. However, it has reached the stage where it is back up my data, but it has now ceased on 12% overal completion for several hours. I took battery out and tried again, but it has again reached the same point and doesn't seem to make any progress.

    Any suggestions on what I should do? is there a problem with my phone or does it take time?

    Help!

    Nicola

    Two options to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.
  • BlackBerry Smartphones Software Update

    Hai everybody, I'm new as a BlackBerry user. I tried to update my BB of smartphone and pop up see the message your BlackBerry is up to date. But I I have found a new version came out with my site Web de BlackBerry operator.

    Should I stay with the current version or upgrade to the new version?

    Hello and welcome to the community!

    Only you can decide what you should and shouldn't do. As a general rule, it is good to update the operating system more recent available because this would have features, fixes and features not in older versions. If the OTA update does not offer you anything, then you can force it via PC (you can't do this on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry Smartphones software problem

    Hi all, I need help... today I back up my phone and new software has been installed, but when I'm offline now a message is on my cry: devide the Pocket contains software that is exclusive and confidential to the research in motion (RIM) ltp... NOW, I CAN'TUSE MY MOBILE... Help, please... k

    kate1 wrote:

    Hi all, I need help... today I back up my phone and new software has been installed, but when I'm offline now a message is on my cry: devide the Pocket contains software that is exclusive and confidential to the research in motion (RIM) ltp... NOW, I CAN'TUSE MY MOBILE... Help, please... k

    Hello and welcome to the community!

    If you cannot have the necessary buttons, then you may need to reload your OS again as something could have hurt in the process. If you try the process again, and it does not offer you different levels of OS install, you have to force. The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • 9860 blackBerry Smartphones software update... IN CASE OF FAILURE

    Like a good little BlackBerry user, I followed the prompt to load a software update.  He asked the question, "Are you ready to be two hours without your phone or emergency access?"  I said, Yes, and he began "backup of your data.  Unfortunately, it is stuck at 6% in "progress in the backup set".  I tried turning off and re-boot and it always gets stuck at 6%.  If I'm doomed?  What I can do.  Will reads now and pray that he will magically fix itself from one day to the next.  If not, then I hope you smart people in these support forums will have the answer for me.  Thanks in advance for your help.     Stephani

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.
  • BlackBerry Smartphones software problems?

    My bb 8520 curve gives me endless disputes it keeps freezing/hanging, and this stupid thing small clock appears in the middle of my screen so often that I can hardly do something, I have only 1 app on my phone because I thought he might be slowing. I have to make a traction battery @ least 3 or 4 times a day, I did a cleanup of security that it made it worse, can some help please

    Hi mako1981,

    I suggest you make a backup of your BlackBerry® smartphone and then reload the software as described in the article below:

    KB11320 - how to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...

    or

    KB19915 - how to perform a clean reload of software applications smartphone BlackBerry using BlackBer...

    Thank you

  • Problem blackBerry Smartphones Software Update

    Hi all

    I have a serious issue here.

    I tried to upgrade my software today to ver *. 181 everything was fine except when my phone data had to be restored back (step 10 of 10). Where is my application crashed and I had to reboot my Desktop Manager. But now he don't ask me to restore data, or update anything.

    Anyone with a clue that, how can I restore my data that was backed up to my Desktop Manager.

    Thank you

    Ramirez

    Search your entire hard disk for files with the extension of the RPI (*.ipd). What are the backup files created by DTM. Choose which is the correct (very probably by the time of the file) and then use it as a source for restoring:

    • KB10339 How to restore data from a backup file to a BlackBerry smartphone

    Good luck and let us know!

  • Pc of blackBerry Smartphones software

    Hi, how do I get media map showing on the pc software, his shows always feature nd I have a memory card on the fone

    Hey Tnsingwane,

    Welcome to BlackBerry Support Community Forums.

    Mass storage mode cannot be activated, please take a look at the following article on how to enable or disable the mass on the BlackBerry smartphone storage mode: http://www.blackberry.com/btsc/KB13564.

    I hope this helps.

    Thank you!

  • Reload 513 blackBerry Smartphones software

    Hi my name is Jojo.  I did something stupid today.  I blocked my keyboard on my phone and I've exhausted all my attempts to open it and now it says "reload software 513".   What I do now, or how?  It is a Blackberry Curve 8330 Smartphone... Please help me...

    Hi and welcome to the Forums!

    Here's a knockout who deals with this error:

    KB13003 "JVM 513" error message appears on the BlackBerry smartphone

    I hope that it contains something useful!

    Good luck and let us know!

  • BlackBerry smartphones software update to the device to 4.5

    I have a new curve 8330 and I've updated the desktop v4.5 software.  I could not update the software of the device to 4.5 however.  The instructions tell you run Desktop Manager and click Update, but there is no option for it on the desktop.  Here, any help would be appreciated because I want to use dataviz documents to go, but it takes v4.5.

    Code 4.5 for CDMA devices are not yet available to the general public.

    I don't even think THAT RIM has just introduced them to their CDMA carriers for certification yet.

  • Desktop of blackBerry Smartphones software update problem

    I have a Torch 9800 and the Desktop Software 6.0 Bundle 2949 version.

    I got a message suggesting that I upgraded to 7.0.0.59 (Bundle 60). However, as soon as the download update is finished, I get the following message

    "Winzip Self Extractor - could not create c\users\owners\app data\RIM - unzip operation cancelled."

    The desktop software will recognize is no longer my phone and cannot synchronize.

    Any suggestions what to do next?

    Thank you very much

    At any time a phone is not recognized by the BlackBerry Desktop Software, I recommend watching this article:

    http://www.BlackBerry.com/BTSC/KB10144

    See if that helps you.

  • Desktop download for Curve 8320 blackBerry Smartphones software

    I bought my Curve 8320 from a previous owner and the software CD was not included. Which version to download?

    To get the BB Desktop Software to open this link: http://na.blackberry.com/eng/services/desktop/

    Click on the Download"" button.

    In the drop-down list select: BlackBerry Desktop Software version 4.7

    Click on the button "Next" under the drop-down list

    To find

    Desktop Manager 4.7.0 English B59 - without Media Manager

    and download it.

    When it is downloaded - install it.

    I advised to download BB Desktop Software without Media Manager because it is not necessary to have the Media Manager.

    It is possible to avoid the use of Media Manager and transfer of media files directly on the desktop computer memory card.

    Visit this link for instructions:

    http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&message.ID=...

  • Desktop blackBerry Smartphones BlackBerry 7105t software

    My daughter has been attributed a 7105t for Christmas... Of course, this is not the last in the line of BlackBerry and its entry with no software. How can I download the desktop software so that she can get the best out of this cell phone? I found the user guide, but it does not say what 'new' software is compatible with this older phone. He said just to put the CD in and download the desktop software.  I also looked on the BlackBerry site on the software and I do not know what program to download (which is compatible with the 7105).

    Any help would be greatly appreciated.

    Thank you!

    Download Desktop Manager here:

    https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

    For this device, you'll be fine with the 4.2 version of the DM Service Pack 2 without the Media Manager software.

    Of course, the newer 4.6 and 4.7 works perfectly as well.

  • Desktop blackBerry Smartphones Downgrade Software

    Good afternoon!

    Tour 9630 V4.1.0.40, using Sprint as a server

    I just downloaded the most recent software 6.0.0.43, unhappy change program office update that created and you want to revert to the previous version on which I had more control. Can locate the method of decommissioning of unit but no office.  Should I uninstall and reinstall?  Could take back me to 18 months.

    Uninstall the current DM.

    Restart the PC.

    Install the old.

    For a clean uninstall of Desktop Manager
    http://www.BlackBerry.com/BTSC/KB02206

  • Error message from the Desktop of blackBerry Smartphones software

    I have upgraded to Windows 10 and when I try to sync my 9720 I get the following error message:

    Sync error

    CRADSDatabase ERROR: (C:\Users\Willie| AppData\Local\Research in Motion\BlackberryDesktop\XCPCSyncOEM\SyncSDK.209.601\Translators\RimBB\Contract

    (13A51349280B43B58E9859A938B3F18) is not open.

    An advise please?

    Thank you sdgardne - a full uninstaal and install did the trick!

Maybe you are looking for