Desktop computer does not display the computers on the network after waking from sleep.
Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.
Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.
After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.
I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.
This issue is resolved.
Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector. Suggestions?
It is a laptop?
And if you start in safe mode?
DesktopHaven't tried safe modeDisconnected the projector, and then restarted; back to work now!
Original title: after the installation of the Board explorer9 will not display calendar date
tried to re install calendar but still no date display
O are you talking about the gadget?
O also, do you mean to say the version of Internet Explorer 9 (Beta)?
This behavior is most often observed if the XML registration is missing in the system. To resolve this issue, follow these steps:
a. close Windows Sidebar. To do this, right-click on the Sidebar icon in the Notification area, and then click exit.
b. open an elevated command prompt window.
i. click on Start > all programs.
II. click Accessories.
III. right click on invite and then click run as administrator.
c. in the command prompt window, type the following command and press ENTER:
Similarly, run these commands:
If the registration was successful, you will see the message DllRegisterServer in
succeeded to for each executed command.
d. open Windows Sidebar (sidebar.exe) and check if the problem is resolved.
See if it works.
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
For about a week, my computer no longer displays my Sansa Clip when I plug upward with the USB cable. I can still hear the computer, the connection of detection, but it does not show in Windows Explorer, as before. I checked the setting on the clip and it sees - USB - Auto detection. If I change this meteorological service of the Canada, Windows Explorer displays the clip and folders, but the folders are empty. However, the files are still on the clip and play. Need to know what is happening, so I can add other files to my clip.
Thanks for the inside. I just do what you say and everything works fine now. Thank you and Merry Christmas.
I saw configuration for testing, and everything seems to work except when I try to connect to the virtual machines using PCoIP. Microsoft RDP works very well, resizes the appropriate office, etc. Trying to connect through PCoIP results in the next login page, but it will not accept any interaction through the client view. Another strange thing is that the login page is with windows and does all of the same screen in full screen is enabled. Here's how things are configured:
-5 workstations running on Win XP x 64 SP2 (see agent installed on each workstation)
-Desktop computers are part of a pool of manual, no persistent
-View connection server is a Server 2003 x 32 R2 SP2 VM
-View Composer is installed in vCenter (4u1 (v)
-All virtual machines are running on top of ESX 4u1
I tried to connect with PCoIP from several different computers (Windows 7, XP) and all have the same question. Any ideas on what could happen?
Sorry, Windows XP 64-bit is not supported at this time. The versions of operating system is listed in the available.
If you find this information useful, please give points to "correct" or "useful".
It says Startup Repair is checking your system for problems. If problems are found Startup Repair will be correct automatically. Then he will say: the Startup Repair cannot repair this computer automatically. Send information about this problem
And then he said access to retrieve options log in as an administrator. I forgot the password of administrator or local user
Microsoft prohibits any aid granted for passwords forgotten here.
If you have forgotten your password, how can I connect normally to use your desktop computer?
Are you sure that this request for password is not not to do with the Acer recovery process?
You can read this information:
"Some Acer models have a default password that you use to start the process of recovery from the recovery Partition 'hidden'.
Usually press you Alt + F10 at startup to start the process of relocation and Acer default password should be 6 zeros, unless someone has changed.
If not, give Acer a phone call. »
See you soon.
When I'm looking in the Properties tab for the device in Device Manager I get - Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
BUT when checking for an update as I get - the best driver for your device is already installed. Windows has determined the driver software for your device is up to date.
I tried to uninstall and reboot, but it does not help.
I am running Vista Business.
Try to run Fixit:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
original title: Hard Drive rename BUG
I have a problem with the change of name of the hard disk.
Disk Management displays the names for each partition, but when I open my computer C only a specific name, the rest of the partitions are named local disk and if I try to change it by right clicking Rename or properties and change volume name, after clicking on ok nothing happens, but more funny that I go to disk management and I can see the change in the name of the partition , but Explorer keeps showing local disk, drives me crazy.
I am running windows 7 Pro.
Someone please provide solution.
Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
(http://windows.microsoft.com/en-GB/windows7/Back-up-the-registry) How to back up and restore the registry in Windows
You can try these:
a. open the Start Menu.
(b) in the area of the white line (search), type regedit and press ENTER.
c. click on the button continue in the UAC prompt.
d. in regedit, go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer
e. in the left pane, right-click on explorer.exe and click on New and key.
f. type DriveIcons and press ENTER.
g. in the left pane, click with the right button on DriveIcons and click on New and key.
h. type the drive letter (EX: E) you want to change the route name and press ENTER.
i. in the left pane, right-click on the drive letter (EX: E) and click on New and key.
j. type DefaultLabel and press ENTER.
k. in the right pane, click with the right button on (default) and click on change.
To change the name of the reader - l.
i. enter a name (Ex: My DVD), and then click OK.
II. go to step n.
Mr.. to restore the default drive name-
i. leave it blank, and then click OK.
II. go to step n.
n. Repeat steps i to m if you want to add another drive letter icon to change.
o. close regedit.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.
I have checked the firewall and they took two computers, but still no luck.
Did you change your computer?
This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.
Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.
Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.
I suggest you to install the update on windows XP.
This reference so
Currently, there are 3 pictures in a folder. I saved two more in this folder with photoshop CC
at a time in tiff and psd format. I imported as usual, but the photos are not displayed in the "library" window
If I try to import the pictures are greyed out, as if they were already listed.
I found the problem. The photos have been duplicated and in another place where they should not have been. I did a search all photos and thought it was them. Once I knew it was easy to fix. Thanks for the suggestion though.
I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.
In the last days I've updated the software and drivers from the Microsoft Update web site.
Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 220.127.116.110, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.
Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 18.104.22.1680 version) has caused many other problems on a variety of hardware and software platforms.
Does anyone have a definitive solution for Satellite L40?
I looked at four options.
1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.
2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.
3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 22.214.171.1240 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.
4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.
Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?
If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.
I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.
Please post the result.
cable tested good, replaced by the new network card it works, actually clicked on the computers in the workgroup to see last week and it worked now missing again... can get online another fine two computers agree, but can not see me
If your router not booking IP use.
Otherwise, configure the computers with static IP addresses.
Then go to sharing and permissions.
Maybe this can help.
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357
In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.
When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
I used to have my screen resolution 1440 x 900 up to what I recently unplugged my monitor now is not even an option to have the resolution 1440 x 900
You could try a system restore before that happened to see if that corrects the problem.
How to make a Vista system restore
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
I'm using Window 7 Ultimate
The following can help:
Whenever I want to check computer (memory) space available on each drive, click on the 'computer' logo, it does not display the response on the screen. Instead, it displays a screen with a message "Windows Explorer has stopped working" for a few minutes and then returns to the original display. I get the same answer, whenever I click on the "control panel" logo I need advice how to solve this problem. Thank you.
Did you change your computer?
I suggest you follow the link (this also applies to windows vista)
Explorer Windows stopped working
Maybe you are looking for
After that the updated BIOS update yesterday my secondary monitor has not worked. The computer is unable to detect in the settings of the device. Given what has happened, I have: Cable unplugged/Replugged and made sure all lights (when you plug the H
Main problem: I'm writing a VI that will read data from a data acquisition and write to a text file when I hit a button "registration". To do this, I use the VI of reading DAQmx in a while loop, which is located in a case statement (I hit the 'Save'
Since 2004, I send, I think some use, its blocked a months ago that I got once, but I again blocked despite I followed all the steps Since 2004, I send, I think some use, its blocked a months ago that I got once, but I again blocked despite I followe
I saw this option for the selection of keyboard on the UK site. This means the keyboard has a US layout but with EU symbols on it? Someone at - it an image of a keyboard? Please post it ~ ~ ~
Well, that's how all passed down, I was given an Acer Aspire 5532 to a friend who found and had no inside hardrive. Naturally, I have a blank hard drive and I installed Windows XP on my new laptop computer. EVERYTHING worked perfectly as Windows XP h