Desktop files Disappered

Similar Questions

• Preparation fresh reinstall of Windows XP. Wish to save all settings display; computer desktop, taskbar to desktop, files, etc.

  Preparation fresh reinstall of xp.  Wish to save all settings display; computer desktop, taskbar to desktop, files, etc.

  Reinstalls previous, I had to do this through trial & error to get it the way I prefer it.  I tried to manually copy the display properties and then reset after reinstalling them, but sequence must be just right to get it the way I like it, & some steps is still missing

  THX

  First create a backup of your hard disk Image. If you then restore the image as you can.

  Free alternatives:
  EASEUS Todo Backup Home V3
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  http://www.TODO-backup.com/

  ============================================================================

  How to make a backup of your registry: http://support.microsoft.com/kb/322756

  Can not say that restoring the registry will do what you want but the Image backup, you will have at your having previously worked copy of XP

  ============ Tweak UI ================================

  Try Tweak UI Power Toy from Microsoft: http://windows.microsoft.com/en-US/windows/downloads/windows-xpInstall,

  run and under logon, you will find checkboxes to select the accounts to display and automatic logon you can choose to enable/disable it by cheque or unchecking the "automatically connect" option.

  TweakUI is a tool very useful and relatively safe for most of the users because they
  don't need to use the registry editor or other methods less obvious to do
  changes to Windows.

  More details on the features available in Tweak UI:
  http://www.winxpsolution.com/Tweakuixppro.aspx

  J W Stuart: http://www.pagestart.com

• How can I change my default save HDD to my FAVORITES and DESKTOP files (I want to always work out laptop for these two files)?

  I travel a lot and always had problems with what files and update my portable media player. Finally, I feel I have the solution and until now it works fine except for two files. I have only about 8 files/important things I work on quite regular, then now, I set up the files on my laptop and managed to get them to be the main 'saved' from my office. In this way, when I go, all I need to do is to make a back-up of EXACTLY what is on my laptop and here I am. [I used to work on my desktop and I must then transfer the files to my laptop when I would need to travel, but inadvertently, is I would like to work on a file on my desktop before I left (but after the transfer) and when I got home from my trip that I would not forget to transfer the portable desktop files but would open and work on a desktop file before realizing that I] did not transfer.  So it would be a nightmare to have to compare each file to copy / paste new entries of the desktop and laptop to get a REAL current, updated file. Now I am working just on the laptop at work, and then on a trip (just have to make backups of a 8 files). My only two problems are that for the life of me, I can't find how to have FAVORITES and save on the laptop instead of the OFFICE desktop computer. Please tell me step by step how I do drive (portable) M be my default save to FAVORITES, and OFFICE to make the perfect solution for my high travels. Thank you

  you could try synctoy from microsoft:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=C26EFA36-98E0-4EE9-A7C5-98D0592D8C52&displaylang=en

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• I am trying to burn a dvd on windows media player movie, but all I get is a desktop file burned on the dvd

  I am trying to burn a dvd on windows media player movie, but all I get is a desktop file burned on the dvd and that's all what he'll do it just ejects and the session is over

  Hi Barbara,

  You can use the player to burn a mixture of songs from the library of the drive or your computer to an audio CD, after which you can play the CD in any standard CD player. Alternatively, you can burn files on CD and DVD data. It is not possible to burn the live streams, such as radio stations, on a CD or a DVD.

  Follow the steps in the link below.

  Burn a CD or DVD in Windows Media Player: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  If you need further assistance on this topic, let know us and we will be happy to help you.

• All previous Desktop files lost after having a Vista system restore

  My Vista hard drive crashed recently. I sent it to a place where my files could be restored and re-enter them. In which folder find "Desktop"? I lost all the previous Desktop files. .../systemprofile/Desktop is not in my computer

  * original title - where Office REALLY? *

  Try going to your drive C/users / / desktopand if it isn't there then the files were probably deleted permanently unless they were shortcuts to programs in this case, they would be somewhere in the program most likely files

• My Desktop files and shortcuts to folders disappeared

  original title: My Desktop files (images, PDF, PSD, txt etc.) as well as shortcuts to folders disappeared. Where files could go to?

  One day, he was doing fine. The other, a whole bunch of icons, files, records were missing. Some are still there, others are not. I've been racking my brain for if I installed anything. And I uninstalled these programs. No change. I got the files that I just used on my desk and they went. Photos, psd files, pdfs, remark, I need things and they are gone!

  What could be behind this problem and how to bring them back? The only thing I remember of change was McAfee. She gave me bad. I called support. They uninstalled and reinstalled. But they were fine after that. No change until yesterday.

  No need for a restore. Thanks for the help.
  However, somehow loads of programs and files have been placed as 'hidden' (don't know how it happened yet)
  I was able to fix the half of them, yet some programs are not available. But working through the problem.

  For those of you who have the same problem.
  As all my files and folders are back! And are very well Phew! Everything is better!

  Solution:

  If I remember correctly, as it has been quite some time. I opened "My Computer" click "Desktop" at the top left. Then I clicked on "Organize" and then "Folder and Search Options" and then "view" then I searched "hidden files and folders" and selected "Show hidden files folders and drives." Click on "OK." -that worked for me.

• All my desktop files and library are missing in Windows 7

  Need help, I have a windows 7 Ultimate OS on an old Dell XPS of 3 years. Operating system implemented at level of Windows Vista home for more than a year. Last week, when I connected, I noticed that all my desktop files were missing. Library of the missing files (including photos, videos, music & docs). Whats funny is that none of the files are missing. However, all possible files in each folder are missing. There is no way that I could have them was deleted by mistake, can not think of a keyboard shortcut to clear all the files, but leave the files. I run avast antivirus, set to day & works perfectly well. No application installs & the only windows update I see around this event was for MS silverlight.

  I backed up all possible files using a recovery agent & the thought of doing a clean reinstall of the operating system. PS - My research on the net has returned no results for this problem. Looking for all entries before going to come & clean clean my system. THX in advance
   
  * original title - need help with Windows 7, all the missing files *.

  Here are the steps I recommend:

  1. Open the computer and open your folder C:\Users.
  2. Right-click on the folder of your user name and select Properties.  Unset as hidden, and then click OK.

     You will be asked what you want to apply the changes.  Choose JUST THE FOLDER.  Although it seems appropriate, are not select subfolders, because some things down there, including the appdata folders and as such, must be hidden.

  3. Then go inside your userfolder and select all your folders accessible by the typical user (downloads, Documents, photos, video, etc.) and disabled the option down on those.  This time, pouvez you use the option 'apply to all subfolders and files '.
  That will get you squared away back.

• Full name: C:\Users\New Age\Desktop\file to fix\FrontierGentleman - All41Episodes_archive.torrent file size: 25.4 KiB

  I downloaded this file and it used open and do not play, I need help please and thank you... make name: C:\Users\New Age\Desktop\file to fix\FrontierGentleman - All41Episodes_archive.torrent
  File size: 25.4 KiB

  Bonniefirmin

  It is a torrent file and it takes an appliction open it and run it like utorrent.  Basically, it's just the location of the file you want.

  FYI, that will be a BIG file

• Real desktop file went in the systemprofile folder. How can I get this back: C:Windows\system32\Config\systemprofile\Desktop

  The 'desktop' file is missing/aisle of the C:Windows\system32\Config\systemprofile\Desktop

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. have there been recent changes to the computer before the show?

  2 are you face any weird problem on the computer?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Rof the United Nations [System File Checker] SFC scan on the computer that would be a search for system files corrupted on the computer and replace them.

  http://support.Microsoft.com/kb/929833

  Method 2: If the problem persists then try to perform a restore of the system:

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Please follow these recommended steps and post if you still experience the problem.

• Windows 8: WINDOWS and Desktop files lose all of a sudden

  Hello.

  Two months ago, my Windows 8 system hung. When I restarted, my appearance of windows has been changed! None of the shortcuts and Desktop files were there on my desk. I opened the desktop workstation directory. Find the files here and them saved! However, my office and Windows does not appear as before. ALSO, once my lap top was closed, the directory Desktop my computer didn't have the files, more.  No programs have been lost.

  I worked with this Windows until today. Today my Skype rang. When I tried to answer, my lap top hung. I restarted. This time, the old windows two months ago started and my project files on mu Desktop have increased with any folder, because I was working on them. I save files every minute. They are not hidden. I searched for them. No results! No recent updates to my laptop. I open Power point and check recent documents. They were all two months. There is!

  I have one of my last day files urgently needed! How and where can I find it? I tried safe mode, too. Useless!

  Thanks for any helpful comments, in advance!

  Hello

  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  I hope this helps.

• Small batch. Review, edit and save to the desktop file.

  I have 50 or more photos of the weekend. I have already created an Album called 'Birthday 2015' and all images imported into this Album.  I want to review them and keep the top 25 or more.  Then cultures, change and save these 25 only to a folder on my computer desk. I want to move this folder over to a SD card or USB key to send to a family member. They want just the photo files, not a slide show or anything like that.  I want to keep the originals of all 50, as well as the finite set of 25.   This will be my first time using Photoshop elements 13 for what that this or another can touch a single image to print at home.   What is the process for this?  It is an 'event', a 'project' I drop the unwanted, those of the Album (how I do that) or simply to 'save' the finished a separate desktop file I'll?  How do I "save under" the picture over to the desktop file? 

  Thank you

  Mike
  

  michaelg7242004 wrote:

  I have 50 or more photos of the weekend. I have already created an Album called 'Birthday 2015' and all images imported into this Album.  I want to revisit and keep the top 25 or more.  Then cultures, change and save these 25 only to a folder on my computer desk. I want to move this folder over to a SD card or USB key to send to a family member. They want just the photo files, not a slide show or anything like that.  I want to keep the originals of all 50, as well as the finite set of 25.   This will be my first time using Photoshop elements 13 for what that this or another can touch a single image to print at home.   What is the process for this?  It is an 'event', a 'project' I drop the unwanted album (how I do that) or just 'save' finishes to a file separate from the Office I'll?  How do I "save under" the picture over to the desktop file?

  Thank you

  Mike

  Mike,

  The two following tips should help you:

  -1- creating a new album of an existing

  An album in your current catalog is a list of files, just like a playlist for audio files. If you want a selection (a subset) of these files, you simply create an empty album. Select the view original album, select the required pictures (easy if you have assigned a given star) by the shortcut Ctrl A, and then drag and drop in the new album of emptiness.

  -2-hourly using 'Export' of the Organizer.

  What you want to do, who prepares the files to a new location or media selected, is called "exporter" in the elements or Lightroom.

  When you're in the Organizer, select the thumbnails (highlighted), you must use the menu file/export or the shortcut Ctrl E. The dialogue then you box will allow to choose not only the target medium or the folder where you want to copy your files. More important still, it allows you to choose the file format and size of the exported files and it can rename them in order to preserve the custom in the album sort order.

  Which is a bit more complex is to work with the original and edited versions if you have version ' sets ' and albums at the same time. If you do not use version sets, no problem. You export originals and files published in two different lots with different subfolders.

  If you use sets of version, which means that the edited versions are attached to the original and you have chosen the version to display at the top of the version set in the navigation area. It is only as the displayed version which is exported. People are generally perplexed when they create sous-albums as described above. Whether you have your album ready for export with the edited versions. You want to export the original separately in a different folder. This would mean that you change the display order of versions to show the original as "top version" for each image. The information about the item "top version" are independent albums: If change you in one album, if the photos are also included in a different album, the 'top' of the version will also change.

  The simple solution if you want to export original and edited separately versions would be to export original first, then do the editing and export the edited versions shown in your albums.

  Once you have the version sets in your albums, you can't easily get to the originals. This would mean using the menu edition/version the value to be converted into individual elements and lose the link between the original and edited version.

  I should mention that the use of the albums is a way to use the Organizer to export your selected objects.

  If you are using categories and keywords, you can select (highlight) your files and export as explained above.

  You can also use the menu file/export to media removable (Ctrl + Shift + O) to copy to flash drive or SD card.

• Strange desktop file authorization behaviors?

  Elements copied from office ask for password to move or delete. Usually the items copied from a rom drive or dvd/cd external? Just right on the desktop.

  Use Get Info to change the permissions of a specific file. However, there may be reasons for these files have the permissions provided. Do not change them unless you know the consequences in this way.

• Qosmio X 505-Q892 Desktop files and folders endangered

  As indicated by the name of the thread I encounter a weird problem I've never seen before, I was wondering if anyone else has experienced this problem before where the files and folders on the desktop and files and folders within other folders just goes completely invisible are however still usable.

  Last night I had some strange lag on my computer so I restarted, everything loaded up just fine. I went to load Firefox and an excel spreadsheet to update on my spreadsheet work, and nothing went wrong. Save the file and went to open one that follows and everything in the folder disappeared. It's like everything just went invisible, I tried to move all my old files to the new folder on my computer from an external drive, and he said that all the files are still there. So I rebooted the computer again, and my entire office was empty except for my trash, so I did a system restore to see if it would be useful and done it in a way, but it only is half of the files and visible programs still. Half of my files are still invisible, the information is there and other programs can access the information, I just can't access it myself via records (if it makes no sense to me).

  Now, I know the difficulty more easy for this would be completely clean up the computer and start again, but I have no boot disks and that you don't have any idea how to get half of the drivers and all back, I'm decent with computers, but this part goes beyond the knowledge that I have. Any person in charge of helping a confused man? @. @ I just want to get my files usable again as they are normally...

  It looks like Windows 7 common bug where it is not refresh the list of files. If you press F5, you should see the files appear.

• How can I keep the original photo date if I have a copy in another file (for example: a desktop file)?

  I have created a new folder on my desktop and you want to add photos copied (from the photo app) of a date range. I would like that they in chronological order. When I copy and paste those pictures, they are all "update" to today's date and does not use the information 'date taken '. Any help is appreciated thanks

  Easy - just export and display in a program that includes photos - dates are incorporated into the photos in the EXIF and IPTC data

  Maybe you look at the dates of the files which are only linked to the record and have nothing to do with the picture somehow

  LN

• Problem correct launch of sequences shortcut on the desktop file

  I created a shortcut on the desktop that runs successfully a sequence file.  The icon I have chosen was "C:\Program NIUninstaller Instruments\TestStand 3.5\UserInterfaces\Full-Featured\LabVIEW\TestExec.exe".  The problem is the following:

  I have several set up desktop shortcuts to launch multiple sequence files.

  If the operator closes TestStand before closing the current file in the sequence, by activating another shortcut, TestStand opens with the previous sequence file loaded.  The file in the correct sequence is displayed in the ListBox on the left of the screen; However, the file of the previous sequence is loaded.  This will inevitably cause confusion with the operator.

  Any ideas will be appreciated.

  Thanks in advance.

  2 options:

  1. tell the users to close the sequence when they are made by choosing File > close all files of sequence and executions.  TestStand remembers the last sequence which was open.  He re - opens there next time that TestStand gets run.

  2. change the source code of TestExec.exe close the file in sequence on farm.  Or do not remember the open movie file.  If you are using the full user interface, you want to look in the VI called Full UI - configure Application Manager.vi which is called UI - full Initialize.vi.  You will see a property with ReloadSequenceFilesOnStart node.  Change the enum to ReloadFile_All to ReloadFile_None.  Rebuild the exe file, and then deploy it.  You will have to look for it if you use the Simple graphic interface, but it will be the same property node.

  If you go with several it's more work for you, but then you don't have the problem of the operators running the wrong test on WEAR it wrong.  Option 1 is a matter of training.