Desktop HP Envy 750qe: cannot install ESXI 6.0 on this server

Similar Questions

• Cannot install ESXi 4.1 on HP ML350 G6

  I'm not able to install ESXi 4.1 on my HP ML350 G6 server.  I have 2 Intel Xeon 5650processor w/6 hearts each, 16 GB memory, RAID 1 + 0 on HP Smart Array P410i controller channel with 6 X 300 GB SAS 10 K disks.  The DVD-ROM is SATA.  The boots just fine CD and get all the way to choose the disk to install it on, but it shows as a remote disc and when I proceed with the installation I get this message:

  The installation operation has encounterd a fatal error:

  Cannot find the image of the installed system. This is due to the image, not been correctly mounted the CD-ROM not supported.

  Curve ball.  I am able to install ESX 4.1 and was able to connect vSphere Client to configure the host.  Why no ESXi?

  I appreciate all the help, I tried as much as I know how.

  Matt

  have you tried to mount the ISO through the ILO instead of using a physical disk? also check the MD5 of the download to make sure it is ok

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Cannot install ESXi on a Seagate HDD 5.5

  Hello

  While I am trying to install ESXi on a Dell M630 Blade Server, it does not detect the storage drives to install on. I use a Dell certified 500 GB 7.2 K rpm NLSAS 6Gbps in 2.5 Hot plug Seagate (model number hard drive ST9500620SS).

  
  

  Any help would be greatly appreciated.

  
  

  Thank you

  In some cases, it may be necessary to clean the partition table on the disk. In any case, depending on your hardware, components, you may need to use custom Dell ESXi image, which includes additional drivers to take support the Dell hardware. You will find the image at http://www.dell.com/support/home/us/en/04/product-support/product/poweredge-m630/drivers. Simply change the ESXi 5.5 operating system and expand the 'Business Solutions '.

  André

• Cannot install ESXi 5.1 U1 or U2, error CPU_CORES

  
  Hello!

  I can't install ESXi 5.1 U1 or U2 on a Supermicro X10SLM + f motherboard with a quad-core Xeon-E3-1220 v3 CPU. It displays "ERROR CPU_CORES" claiming that I have only a single core and stops the installation. I was able to inject the drivers NIC to go beyond the failure of the 'no network adapter', but now I get this error of CPU.

  Someone at - it tried with this combination and has managed to install ESXi?

  Thank you for your time!

  Gregg

  Root cause found by Milton Cai to Supermicro tech support.

  Flash the BIOS to v2.0 was not completed correctly. Move the jumper to pins 2 and 3 JPME2 and re-flashing, then back to pins 1-2, fixed it.

  See these FAQS:

  http://www.Supermicro.com/support/FAQs/FAQ.cfm?FAQ=18279

  http://www.Supermicro.com/support/FAQs/FAQ.cfm?FAQ=17137

  Gregg Hill

• Cannot install ESXI 5.5 HP 3500 PRO series

  Dear all,

  Try to install ESXI on HP PRO 3500 MT series 5.5. Its gives me the following error.

  "NO network adapters have been detected.

  Can someone please help?

  Thank you
  Sriram Das A

  Im not saying there is a problem with your network adapter, its just ESXi does not have a suitable driver for it. IM assuming that you use Realtek RTL8171E gigabit ethernet (received this HP site). There was a blog post from Vladan Seget on how install driver 8169 vib. http://www.Vladan.fr/Realtek-8169-NICs-not-detected-under-ESXi-5-5/

  But once it comes to 8169. I'm not sure if there is a driver available for 8171 (8171and same 8169 is not in the list of VMware support)

• Cannot install ESXi 4.1 but can install ESXi 3.5

  I have a Dell PowerEdge 2600

  I tried to install ESXi 4.1, but it simply doesn't. Happens to step to show the points and keep the machine on reboot and it goes into a loop.

  I managed to install ESXi 3.5 that I thought that the machine does support 32 bit.

  There are some features I need on the 4.1 which are not included in the version 3.5 for example boot from .iso and also the 3.5 I think is no stable (dose of console does not display anything).

  As I am already running 3.5 I tried to do an upgrade from 3.5 to 4.1 in vain.

  Would be really appreciated any help.

  Thank you

  Hi, me too I have a Dell Poweredge 2600, I bought used about 4 years ago. The Intel Xeons that are only 32 bit so that they do not support vSphere.

  HTH,

  Bernie

• Cannot install ESXi v5.5 - copy with debugfs error

  Hello!

  I am installing Hypersphere ESXi Vsphere v5.5.0 (or v6.0) on a Dell computer.

  I burned the image to a CD:

  VMWare - VMvisor.Installer - 5.5.0 - update02 - 2068190.x86_64.iso

  I can boot the computer off this CD image, and the first steps of the installation process are ok. At some point, I can accept the license (press F11), and then to select the player that I want to install to.

  In my case, there is only one choice: internal HARD drive. This point is highlighted in yellow, I just press ENTER.

  A few seconds later, I get the following error message:

  Copy with debugfs to /tmp/ESX_upgrade/boot/Initramfs_genkernel-x86-3.14.16-gentoo.gz

  Any help will be greatly appreciated!

  THX

  Tibo

  Is there some thing/all operating system installed on the local disk? In this case the local disk wipe could help.

  Alos there could be a problem with the driver for the NETWORK interface that is integrated, which is generally not supported (no driver) with desktop computers. You will need to customize the installation image in this case to add the driver.

• Cannot install ESXi 4 on HP DL360 G6

  I have a brand new HP DL360 G6 I downloaded 4 ESXi and ESXi 3.5 U4 and iso confirmed are correct with md5 checksums.

  I've updated the Bios and RAID controller to the latest firmware and reset all to factory default.

  I ran HP Smartstart CD and run all the diagnostics & full on everything and everyone on two occasions. with the help of HP Tech on phone.

  I install Windows 2003 Std without any problem.

  I too disabled PXE on the NETWORK interface card in the bios.

  Hardware config.

  2 x Intel Quad Xeon E5540 2.53 Ghz

  4x4Gb = 16 GB of ram (all matched)

  6 x 146 GB 10K two ports SAS RAID 10 on with firmware p410I 1.66 (tested RAID 5 too)

  I get to the screen of the yellow Installer Accept install, then select disk0 and about 2 percent in said what follows.

  The installation operation failed

  The installation operation has encountered a fatal error:

  Cannot write the image on the selected disk. This can be caused by bad sectors on the device or other hardware problem.

  The following information will help VMware Support team with your problem. Please save this information before proceeding.

  System information:

  Manufacturer: Hewlett-Packard

  Model: Proliant DL360 G6

  Used Tag: XXXXXXXX

  BIOS Rev: Hewlett-Packard

  If I not I see the following in the last lines of Alt - F12

  0:00:00:30.601 cpu1:4859) SFS: 1073: 1 e9 4 0 0 0 0 0 0 0 0 0 0 0 not a drectoryh

  sysboot: 13, esxupdate-db-maint returned error

  sysboot: get the "PBHOST" of the line of the kernel startup parameter

  sysboot: running "crond".

  sysboot: execution of "setsid(2) /sbin/watchdog.sh s cdp/user/sbin/net-COP."

  sysboot: execution of "esxcfg-init" - set-boot-progress fact

  sysboot: execution of "sbin/vmdumper" - g successful startup

  0:00:00:30.752 cpu4:4891) successful start

  0:00:00:31.219 cpu5:4899) FFS: 1073: 1 4 4 c 7 0 0 0 0 0 0 0 0 0 0 0 not a Director

  Help, please!

  I would absolutely use the version of HP. First try.

  http://communities.vmware.com/docs/DOC-6824 for a manual installation of the USB. Works the same in 4.

  http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM06 for the version of HP

• HP ENVY 5660: CANNOT INSTALL

  6 TIMES TIRED TO SET UP AND INSTALL THIS NEW PRINTER WIRELESS TO MY MINI-TOWER COMPUTER

  EVERY TIME SAYS THAT SOMETHING IS MISSING, 13 ERROR AND CANNOT COMPLETE THE ENTIRE UPWARD

  FRUSTRATED

  has been connected to the HP support and problem solved.

• Cannot install ESXi 5.5 on Dell PowerEdge T620

  Hello

  I have a Dell PowerEdge T620 server and I want to install VMW VSphere Hypervisor 5.5 on that.

  I tried 2 ways above, but they are not successful.

  Track 1:
  -Start with DVD integrated with server
  -Config for RAID 5
  -Choose the option "VMW ESXI 5.5 HDD"
  -Error: "the provided raid configuration is not supported" and force reboot me.

  Track 2:
  -L' boot using an ESXI 5.5 CD-ROM
  -Follow the step on Setup screen.
  -Scan disk step HARD to install the process is too long too long scan...

  I hope that an idea can help me solve that.

  Thank you!

  You use the ESXi Dell installation?

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?DriverID=20VNP

• HP envy 4504: cannot install software for hp 4504

  Hi-hope you can help

  I am trying to install a hp printer 4504, but the downloaded driver and the software will not install. I've tried everything in the troubleshooting guide and have also tried to disable my anti virus software. I also tried to use the disk.  None of them worked.

  Thank you

  1815 wrote:

  Hi-hope you can help

  I am trying to install a hp printer 4504, but the downloaded driver and the software will not install. I've tried everything in the troubleshooting guide and have also tried to disable my anti virus software. I also tried to use the disk.  None of them worked.

  Thank you

  What was the site you downloaded the software from? Also you are the administrator, otherwise it will not be installed? Sometimes, you do a 'run as administrator' sometimes to install stubborn programs. But since we don't know where you got this patch program will be hard to find.

  Try this driver for hp here... they have Win7 driver/software support.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5368527

• Cannot install esxi 5.5.0 u1 on UCS C220 M3S with version 2.0.1a - no network card

  Hello world

  I have a big pb installing esxi5.5.0 U1 on a UCS C220 M3S with version 2.0.1a. I get this message: no network adapters.

  I found a lot of post on the internet that say to do a custom installation CD, what I have done but without success. I also try to use the iso installation Cisco custom, with the same result...

  I have not anderstand what happen as the MMIC see network interfaces...

  Here's my hardware:

  Firmware of Intel I350 1 Gbps 0x80000AA4 network controller - 1.446.1

  Firmware Interl Server Ethernet adapt I350-T4 0x80000AA6 - 1.446.1

  BIOS 220M3.2.0.1a.0 (Build Date: 28/04/2014)

  MMIC 2.0(1a)

  According to Vmware Compatibility Guide, this version is compatible with: C220M3.2.0.1a.0.042820140020 of Cisco Systems, Inc.

  http://www.VMware.com/resources/compatibility/detail.php?deviceCategory=...

  and by Cisco Compatibility guide also: http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

  If the ideas?

  Thanks a lot for your help.

  Concerning

  Similar situation discussed in

  https://supportforums.Cisco.com/discussion/12189941/no-compatible-networ...

  It is possible that the optionROM for the integrated card is not activated.  Try to enable it in the BIOS, you can via the MMIC (see cimc_enable_optionrom) must attached. You also want to verify that this option gets enable in the bios.
  You can enter the bios by pressing f2 during boot (see BIOS_Option_ROM)

• Cannot install ESXi on MacPro 6.1 Firmware MP61.0116.B11 5.5u3

  Hey everybody,

  I have a Mac Pro 6.1 which has been recently updated to Yosemite 10.10.2 to have the latest version of the firmware MP61.0116.B11.  I know that VMware brand MP61.88Z.0116.B05 as their last.  On the download and the creation of a Setup ESXi bootable to prepare the Mac Pro all load and present me with Setup ESXi 5.5.0 but the system recognizes no any keyboard so I can't hit enter to continue the installation.  I tried a Dell USB keyboard and 2 Apple keyboards but no dice for either.  We took another 2013 Mac Pro in exactly the same configuration, but that has been bundled with 10.10.0 and probably has an older version of Rome.  Someone at - it ideas?

  It does not resemble a keyboard Bluetooth pairing allows him to work.

• Cannot install ESXI 5 on DELL R720 (NIC not found)

  Hello

  I read that I need to download the patch for the Broadcom onboard network card and I did.

  I don't know what now? to unpack the patch on my PC?

  can you please guide me how to use the patch with the ESXI ISO?

  BTW, why DELL do not have a customization ESXI 5.0 like HP, Cisco and others?

  Thank you!!

  Dothan.

  There is a cd of dell custom

  When looking for drivers select vmware or esx as the guest operating system.

  Here is the link:http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?DriverId=PHTJP&FileId=2988919716&productCode=poweredge-r320&urlProductCode=False

  I also added to my page: http://sparrowangelstechnology.blogspot.com/2012/08/dell-customized-esxi-iso.html

• Cannot install a network - error message: this wizzard can not configure a network connection.

  Vista Business SP2 32 bit OS

  Impossible to set up a network connection using a wizzard.  Message: This wizzard cannot set up a network connection.

  A broadband connection was founded prviously.  There is no display of the network in 'connect to a network window.

  a new folder by name hiddenpbk appeared on the desktop and through which I can connect to the previously established connection.  but can not connect via "connect to a network window.  Neither I am able to set up a new connection using the wizzard.

  Please helpme.

  Hello

  Can you explain what connection to a network means in your case?

  What exactly you want to connect?

  If you have a valid broadband (Internet connection), you are already connected to a network.

  If you want to check your wireless system follows this process.

  If as a result of this process, you find something wrong, tell us what it is.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET