Desktop HP Envy: should I leave computer 24/7?

Similar Questions

• I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

  I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

  Keep the computer plugged in whenever possible.

  If you keep the computer always connected, make sure that at least twice a month

  Run it on battery until battery charge level falls to about 40-50%.

  Please don't completely discharge the battery. Discharge the battery completely will reduce wear and tear on the battery.

  For more information:

  Section: To optimize the battery life

  http://support.Apple.com/en-us/HT204054

  Citing at the bottom of the linked article.

  "The question is often asked:" should I disconnect my laptop from the mains when not in service? Under normal circumstances it should not be necessary because as soon as the lithium-ion battery is full, a properly functioning charger will stop the load and load the pad will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe. »

  http://BatteryUniversity.com/learn/article/bu_808c_what_the_user_can_do

• How to connect to Windows 8 on my computer desktop HP Envy without using a password or pin code?

  How to connect to Windows 8 on my computer desktop HP Envy without using a password or pin code?

  Hello

  Did you read the MS article that I posted above?  There are instructions on how to do not require a password.

  Since the upgrade to Windwos 8.1 is free, then you should do this update and apply all of the published HP updates.  Then watch this video and it will show you how to remove the password and lock screen.

• Desktop HP ENVY 700: problems with the boot from usb in the bios

  Hi I'm trying to boot from usb on a desktop HP ENVY 700. I don't know the serial number now.

  I followed the instructions and have produced a bootable USB and I checked this on a work dell computer where there is an option for me to boot from my USB if I so wish, but on my HP ENVY any options choose it does not appear with my USB in question and when I try to change the boot sequence making sure the usb/floppy and drive hard usb is above the rest of the sequencers starting it always starts just to the top as usual to my windows boot 10. I've disabled secure boot and used the boot of the legacy and it still does not work.

  I went through all the options I can that seem to be logic and it just does not work. I don't understand and I have to start using a usb key that I use the operating system can be very dangerous in a real environment, so it can not be downloaded to the hard drive.

  I need immediate help, this becomes quite frustrating now that it should be simple to do, but HP is not the way to simplisitic to do.

  Please if someone could point me in the right direction I would be so appreciative ideally if I could have a ride on the way to do

  I need this to work because I can't afford to buy new systems and its for my studies so its imperative

  Your PC has a motherboard of Memphis and happens to have a UEFI BIOS and the hard drive of the GPT format.

  You can check the type of hard disk online order volume by using the DiskPart utility.

  

  Create a flashdrive bootable UEFI with RUFUS.

  https://Rufus.AKEO.IE/

  Plug it into an available usb port before you press the power button. Near the powr button and immediately start to tap the F9 key to enter the boot from the sources menu. Select the Flash drive under the UEFI Boot sources. Let the boot process. If you have created the key correctly, it should start.

• Desktop HP ENVY h8 - 1520t CTO: the work of 750ti GTX with my HP Envy h8 - 1520t?

  Currently I have a desktop HP ENVY h8 PC - 1520t.

  (http://support.hp.com/us-en/product/HP-ENVY-h8-1500-Desktop-PC-series/5330773/model/5333059/product-...

  I think to buy an EVGA GeForce 750ti Superclocked 2 GB GDDR5 graphics card

  (http://www.amazon.com/dp/B00IDG3IDO/ref=wl_it_dp_o_pC_nS_ttl_encoding=UTF8 & colid = 1UKLB0G1XKA6Q & colii...

  I want to know if the graphics card will be compatible with my PC

  Thank you

  TPDavd, welcome to the forum.

  I think it's a great little card.  I think it should work on your computer.  However, before order you I advise to contact EVGA Tech Support to ensure that they agree.  They will be able to tell you with certainty all.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally? What other steps should I take in Mode safe?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  System Restore IS NOT the way to remove malware. The reason why you do not see the effects of the malware in safe mode is probably due to the fact that the process for most malware does not load in safe mode, and therefore not active.

  Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

• Will not wear my watch for a week... should I leave it on the charger for a week or take off for the week?

  Will not wear out my watch for a week... should I leave all week on the charger or leave it?

  Hello

  You can leave it on the charger if you wish.

  https://help.Apple.com/watch/#/apd2b717523a

• ENVY 750-129cb: new computer - DVD not opening

  Hello

  Just bought a HP Envy 750-129cb awesome computer - and internal DVD/CD RW drive does not, when the button is pressed (after the opening of the case of money - outside)

  HP DVD/CD RW drive

  Module # DV - 8465H, February 2016

  Provided with the computer

  I opened the computer and checked all cables, etc., everything looks good, but the DVD will not open.

  Any ideas?

  Thank you very much.

  Hello

  Thank you very much for the help - I really appreciate it.

  So, I bought a new graphics card - graphics of 750 Genforce GTX ti, as my old HP Elite had an AMD Radeon 6700, while I was trying to get an equivalent to him for my new HP Envy, since AMD card was not compatible with the motherboard.

  The 'tech' guy, said it would make a difference of 25% - the graphics card GTX AGAIN, that what came with the HP Envy 730 GT map - and especially good for photos.

  But, please let me know your thoughts. Don't you think it's a value-wile put this card in? Maybe I'd better return the card and put it toward a new laptop, since both of my laptops died at.

  Thank you once again, all the details would be really nice

• HP Envy 15-j109TX Touchsmart computer laptop upgrade help

  Hello, my HP Touchsmart Envy 15 - j109TX laptop computer is shipped with 2 GB DDR3 NVIDIA GeForce GT M 740 graphics. Can I put graphics or higher cards of 4 GB DDR3 NVIDIA GeForce GT M 750 ?

  Also, I want to upgrade the RAM to 16 GB and a 2 TB HARD drive . Is this possible? I don't see any customization option in the HP Shopping Web site. So how can I do? also, thanks for mentioning about cost of upgrade of these.

  Hello
  
  Here are the specifications of product: http://support.hp.com/us-en/document/c04031367
  
  Go through the Page 4 and 5 of the user manual:
  http://h10032.www1.HP.com/CTG/manual/c04091768.PDF
  
  Upgrade options:
  Up to 1.5 TB drive HARD with no hybrid NAND support
  
  Up to 16GB 1600 MHz RAM with boost DDR3L dual channel
  
  Although Nvidia 750 M dedicated 4 GB card is indicate against the graphics options, I think not that this is possible because actually nvidia in this model is not as a card but more a chip which is attached to the motherboard. I think you need to contact HP in your area directly for this.
  
  It will be useful,
  Thank you

• Desktop HP ENVY Phoenix 810qe: desktop HP ENVY Phoenix 810qe

  I wanted to know if
  
  Desktop HP ENVY Phoenix 810qe
  
  Comes with graphical bultin or only the dedicated graphics card?
  Please guide me so that I can make decision of purhcasing this product. Thank you

  Hello

  The link you provided indicates that this particular model has a NVIDIA GTX 745 graphics card included in the price.  This product HP, K6V72AV, also built in the Intel graphics processor, but it is not usable when the NVIDIA GTX 745 is installed.

• Should I leave my new mini die 4 Pad completely before you recharge it fully?

  Should I leave my brand new mini die 4 iPad completely before recharging? I've heard that it can increase the autonomy in the long term?

  You too, its called a full life cycle when it has low battery and charge you 100%, this will increase your battery if your having battery problems

• HP ENVY desktop h-8 1520 t CTO: where can I download HP TOOLS for my desktop HP ENVY h-8 1520 t CTO: 8.1 Windows Pro 64 bit?

  HP tools partition has been deleted! I need to download the HP TOOLS for my desktop HP ENVY h-8 1520 t CTO?

  Thanks to the members of form help.

  Hello

  The HP_TOOLS partition can be re-created by installing the diagnostic software package found on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-141219-1&cc=us&DLC=en&LC=en&OS=4158&product=5333058&sw_lang=

  Kind regards

  DP - K

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• I can run a windows desktop themepack 7 on my other computer that has win xp pro?

  original title: I can run a windows desktop themepack 7 on my other computer that has win xp pro? I copied the files on the xp pc, but I get a message saying windows cannot open it. Thank you

  I can run a windows desktop themepack 7 on my other computer that has win xp pro? I copied the files on the xp pc, but I get a message saying windows cannot open it. Thank you

  Go here for instructions:

  How to use the themes of Windows 7 on XP or Vista.
  http://www.labnol.org/software/Windows-7-themes-for-XP-and-Vista/11205/