Desktop HP Pavilion HPE h8 - 1360t - internal speakers don't seem to work?

Similar Questions

• Desktop HP Pavilion HPE h8 - 1360t there rear USB ports?

  I have one of these order of HP computers. Everything I've read indicates there are USB ports on the front and the top of the unit. Nothing on the back. Not even a photo. Having the wires coming out of the front constantly ensure is ugly, in my opinion.

  Here are the specifications and configurable options for the desktop HP Pavilion HPE h8 - 1360t CTO. Here are the specs because that's card mother IPMMB-FM (Formosa). According to the specifications;

  

  (#2) - USB 2.0: 4

  (#4) - USB 3.0: 2

• HP Pavilion HPE h8 - 1360t Desktop PC audio output

  Desktop HP Pavilion HPE h8 - 1360t there outputs separated from the headphone speakers?

  

  1 S/PDIF 2 - USB 2.0: 4 3 - LAN (ethernet) 4 - USB 3.0: 2 5 - 1 DVI - i and DVI - d: 1

  6. audio: Center/subwoofer 7 - Audio: Line-in 8 - Audio: output rear speaker

  9 - audio: line out 10 - audio: pregnant side 11 - Audio: Microphone

  AND

  15-in-1 multimedia card reader + Top I/O (2 headphone plug to listen USB 3.0 + 1 + 1 taken micro + Front I/O (2 or 4 USB 2.0)

  YES, the h8 - 1360t should have outputs of speakers separated from the headphone output.

• What software native AV hp pavilion hpe h8 - 1360t have?

  HP pavilion hpe h8 - 1360t

  Windows 7 Edition home premium

  looking for software native AV for my desktop hp help solve a problem with the download of an online store. any help would be appreciated... thx, shave

  Hello

  Unless you paid for otherwise normally the machine is supplied with a product called NIS (Norton Internet Security) .

  Kind regards.

• No sound from my laptop! in the control panel it says internal speakers are turned on and works but it is still no sound

  Yesterday there was no sound... today no sound?

  in the Panel, he said internal speakers are turned on and working, cannot restore the system that do not have a point to return to.
  can anyone help?

  Hello

  You have made any changes to your computer recently?

  I suggest you to follow the steps from the link and check if it helps.

  No sound in Windows

• Pavilion HPE h8 - 1360T: Max RAM per slot (4 locations)

  I'm upgrading RAM on my 1-1/2 year old h8 - 1360t.

  On the page "Product Specifications and configurable Options" (http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03425388 & DocLang = in & docLocale = en_US & jumpid =... , under Hardware Options - memory, it says "must select one of the following options:...") 16 GB (4 x 4 GB) PC3-12800 DDR3 (PC3-10600 on this system turns)' (the only 16 GB option - maxed out for WIN7 64 bit).

  In addition, in the support page "HP Desktop PCs - the upgrade memory (RAM)" (generic - non-specific to any model) (http://support.hp.com/us-en/product/HP-Pavilion-HPE-h8-Desktop-PC-series/5258496/model/5261720/docum, under "Verification of the quantity of memory can be added to your computer model", it says "to find the amount of memory per slot, divide the maximum amount of memory that the computer can hold by the number of memory locations of the motherboard. Usually, this is the maximum amount for each type of memory. For example, if the computer is able to contain a maximum of 4096 MB (4 GB) memory and the motherboard has four memory slots, install 1 GB (or less) per slot. »

  When I check the options of 'Memory' on www.crucial .com, the only 16 GB option it gives is 8GBx2.  Can I do trust what is Crucial says about it (which seems to contradict what the HP options & specifications page)?  I think that the answer is Yes - that HP doesn't care. and options page is just saying how it would come if I had ordered with maxed out at 16 GB RAM - but thought I would ask before ordering memory.

  Thank you for responding to this.

  I dug a little further on the Crucial site, and it seems that the 8GBx2 actually works:

  Recommended for my computer:

  

  And here's the review of one of the examiners:

  

  The reason, I was a little skeptical about what the HP standard sheet said for the computer I had before this one, HP said a certain maximum size of RAM (below what the operating system should be able to manage).  There was a post on the HP forums who said you could use the larger RAM size (until the operating system can manage) in this model computer.  I tried and it worked fine.

• The pavilion p7 1235 have internal speakers?

  Pavilion P7 1235 7 running windows there internal speakers?

  Here are the specifications of the desktop HP Pavilion p7-1235. Based on the lack of speakers either mentioned in the plug, I would say that this model is not internal speakers.

  Please send Bravo

• HP Pavilion HPE 1090 t: could someone help me please... Desktop HP Pavilion HPE h8-1090 t CTO - PSU replacement/compatibiliy

  I just bought a new power supply (Corsair CS650M) because someone has suggested that it would be a good replacement power supply for my HP model which is HP Pavilion HPE 1090 t.   I need to know if this Corsair works and is compatible with my system, because something is not working with him directly or I did something wrong.    This is my first install and when it comes to the ins and outs of power amplification entry & exit and amperages I get so confused about this stuff.   But I think I took all the pluged connection correctly, at least when I re-plugin my old PSU after the installation to fail, I had the PC working again, what made me give confidence that I did the Corsair install correctly.  But what happens is after the installation of the unit from Corsair and turn the system he clicked power off after about 10 seconds or more and then restarted after a few seconds, then stopped again and turns off after another 10 to 15 seconds, and nothing would come up on top of the screen no more.   The first time I did the research what PSU would be compatible, I was getting conflicting results with a few places on the net saying that the majority of the HP out there (excluding some models such as the slimline) could be replaced by different manufacturers and higher power PSU, while other places I looked different.   Even the person who recommended me this power supply said in his post that he installed a Corsair HX650 model in its HP PC, and it worked very well for him.  Now, after the failure of the installation for the next few days, I did a lot more research and when I went on the site of HP and looked up the specifications of the model my PC I noticed under the power supply section, he had a heading that says "must select one of the following options" (in fact most of the different sections shows that the title too) and then he showed only two options 460W and 600W.  Then he asked me if it's the only option I get with my model.  And then I looked at my model number HP on the HP PartSurfer and under the section of the PSU, it also registers only 460W and 600W.   So who is?   I have to stay with only these options two HP or can I get a power supply with a higher power a bit then 600W from a different manufacturer that is what I want.    If I can get something that is compatible other than the options listed HP please let me know, or if this Corsair should work someone please let me know.   I need to return it otherwise.    My specs are below.

  Thank you Aaron

  HP Pavilion HPE series
  Model No.: h8-1090 t CTO Desktop PC

  Name motherboard manufacturer: IPMTB-TK Pegatron HP/Compaq name: Truckee

  PIC of the motherboard link: http://support.hp.com/us-en/product/HP-Pavilion-HP E-h8-1000-Desktop-PC-series/5080764/model/5117795...

  Original HP installed: AMD Radeon HD 6570 (Bronco) graphics card 1 GB Model: 648533-001, SP # 659355-001

  Link video card PIC: http://www.ebay.com/itm/111761368505

  Nothing has been added/modified recently real system.  Last change was the beginning of the year 2015, which was a new 2 TB HDD and added however problem memory only started about 3 weeks ago.  The Interior has been cleaned (diffuse can)

  600W Μatx Estar v5 HF PSU (Petrus)

  Information about the current hardware out of the Power Supply Unit

  Switching power supply
  Model: DPS-600WB A
  Part number: 633186-001
  600W power MAX

  Output: DC output rating (new Corsair PSU)

  + 12Va = output DC 16A = + 3.5V / + 5v / + 12v /-12v / + 5vsb

  + 12Vb = 18 a Max Load = 25 a / 25 a / 51 / 0.8 a / 3a

  + 12Vc = 12 a Max comb = 130W / 612W / 9.6W / 15W

  + 12Vd = 10A power Total Power 650W

  + 16 5.08V = side of AC input

  + 3, 3V = 15 a AC input: 100V - 240V

  + 2 5.08Vsb = current: 10A - 5A

  -12V = 0.3 frequency: 47 Hz to 63 Hz =

  Entry:

  100-127V ~, 50-60 Hz, 10 a

  200 - 240 v ~, 50-60 Hz, 4A

  You are welcome.

  Although there is a limit to the amount of power that is needed to power your computer, it uses only the amount of power it takes to power the computer correctly.  The extra power is kept in reserve for the purposes of art.  Thus, you cannot really bad the computer with extra power or amperage.  You can sleep on this point.

  Indianaak wrote:
  

  Thank you very much for your quick response, I wasn't getting anyone to answer the previous post.

  If your saying these HP spare parts are not exclusive to the company?  Some connectors may be owners, but most are not.

  It should work then?  Yes.  I've recommended hundreds of the PSU in the years I've been helping on the Forums; in fact since about 2002.

  How about the input/output & amperages of note that I registered?  As I understand not all this jargon, I want to assure you that I have / using correct notation for my system.  I don't want to fry one of my compondents with to much amperage.   Well, either I did something wrong installing or this power supply is a dud then.  Read my explanation at the top of the page.

  As I said before I pretty sure I had all the right connections, what can you tell me if it sounds right for you.  I have pluged in both connectors wired on the motherboard which were the main ATX 24pin power connector and the EPS/ATX12V 8 pin which I shared and pluged a piece of the cable labeled 'CPU' in slot 4 pins on the montherboard labeled ATX CPU.  Regarding the other split 4 pads, I don't see anywhere, it could be pluged into the motherboard.  If two 4-pin connectors were even marked, it should be good.  However, you can try to plug the other 4 pin instead of this, just to make sure that the right pair is connected to the processor power.

  My AMD Radeon HD 6570 1 GB graphics card is the type that is fed through the MB so I didn't use any of the PCI-E cables 6-8 poles.  It is very good.

  And so the only thing I had left that I have pluged the compondents of Sata cables that was my Bluray burner, my 2 TB hard drive and my USB 3.0 card.  They are very frank.

  Yet once again being installation of hardware in my system let me ask hopefully not a stupid question, but when you connect compondents Sata cable, you must have the plug-in in a particular order of wiring compondent or how do you?  I don't check the specifications of your power supply, but I think most of them have a single 12V rail.  If this is the case, you don't have to connect them to any order.  If there are two rails, it is best to divide the power of each rail.

  On my old PSU, it has an extension cable SATA used to connent card USB 3.0 which is pretty tightly squeezed between graphics card and sound card, so I guess I could use the extension cable with the new PSU POWER Sata wiring without any compatibility also publishes, right?  This should be no problem I can think of at this point.

  Thanks again for your help, I'll probably will try and plug it once more and see if I can make it work.  If this does not work for now, I strongly suggest that you contact Technical Support of Corsair for help.  They are the experts on their products and grab any errors that we do.  It is very difficult to diagnose a problem by far.  When you have done with this project, you will no longer be the excuss you are a novice. You will have a lot of knowledge that you did not when you started.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Internal speakers Satellite C640 suddenly stopped working

  Hi friends,

  My satellite c640, internal speakers suddenly stopped working but works fine when the headphones or external sources are connected
  Is this a hardware problem?

  I m using win 7 64 bit and I tried to install the drivers but seems to be a hardware problem

  Thanks in advance

  Hello

  I don't know if it is a hardware issue of m.
  You may need to check certain settings.

  In Control Panel-> sound-> the Read tab.
  You should see the speakers selected as the default device.
  You can also click these speakers to the right and you should see a few options:
  Speaker Setup
  test
  Disable
  and so on.

  Test the speaker first. In my case, a short tone is displayed. You can also mark the speaker and click the properties button. You will see a second window with tabs. Check the second tab called LEVEL. Here, you can change the sound level.

  What happen exactly when you try to reinstall the sound driver? You get errors?

• Pavilion HPE h8 - 1360t: no internet connection

  I can't connect to the internet.  The wireless router works and connects the other points to the internet, so I know it works at this point.  I am using a cable to the HP Pavilion and tried a different cable and that did not help.  I tried different plug-ins for the router and which did not help.  Tried connecting direct modem HP and rude which did not work.  I think that the problem is with the NETWORK adapter that is on the motherboard.  In the system, he says he's working.  Also indicates that the drivers are the most recent.  But it is not connected to the internet, so I don't know if he knows.

  I installed Windows 10 a few months ago and everything worked until about 5 days ago.  Is it possible to check the NETWORK card?  Or what should I look for and then do?

  Another problem that may be relevant, it's that I lost the start menu that should appear.  I was right clicking on the Start button for everything that I needed for a few weeks now.

  TIA,

  Jim

  Hey there!
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that wireless and the start menu does not work on your laptop.

  Please try a few steps recommended below.

  Step 1. Click the Start button, then select "Command prompt (Admin)" from the menu. This can run as administrator command prompt.
  Step 2. Type the following command and press the Enter key:
  Reg delete HKCR\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f
  Step 3. Enter the command below in the command prompt and press ENTER once more:
  netcfg - v u dni_dne
  Step 4. Restart the computer, and come back with your parameters of connection Wi - Fi free. You should now see a list reconstituted from all the networks available within the range.

  To fix the start menu, please follow the steps recommended below.

  1. launch the Task Manager

  Press [Ctrl] + [Alt] + [Del] keys on the keyboard at the same time, or with the right button of the taskbar, and select Task Manager.

  2 a new task in Windows

  When the Task Manager window opens, click more details to decompress, and then select new task run on the file menu.

  3 run Windows PowerShell

  When the run new task dialog box opens, type powershell, check the box to create this task with administrator privileges, and click OK.

  Type the following command: Get-AppXPackage - AllUsers | Foreach {add-AppxPackage-DisableDevelopmentMode-register "$($_.) {"InstallLocation) \AppXManifest.xml"}

  I would like to know if it works!

  Have a great day!

• Windows 7 - HP Pavilion HPE h8 - 1360t I added a second hard drive

  I installed a seagate (seagate 2 TB Barracuda SATA) second drive on my desktop computer.  When I got to the top I could go to the control panel and not see under the heading records.  Seagate said to go to the BIOS and choose 'Auto Connect your new drive', but there is no other choice to Auto Connect.  If anyone can tell me who is the right choice on the BIOS screen to find and identify my new second hard drive?

  Hello

  In the disk management window, right-click on your new HARD drive and select Format to start the wizard.  Windows 7 will affect a Volume label so if your happy with it, just leave the default.  File system is NTFS.  Allocation unit size must be left by default.  Select the option to perform a quick format if it is not already done.  Leave all the other default settings, and then click Ok, and then Ok to start the process.

  Once this done, your new HARD disk should now appear when you look under the computer.

  Kind regards

  DP - K

• Pavilion HPE h8 - 1360t: update to Windows 7 will not

  I made the fatal mistake of upgrade with a new installation of Windows 7 HJome Premium to Windows 7 Professional. After a lot of hunting to find the various missing drivers of WIndows, I was able to install a fuly operational Windows 7 Pro, but now I find that it will not update. I spent hours to examine and try the many "patches" (often contradictory) found on the Internet, but none of them did actually resolve the problem. The failure of Windows 7 update seems to be a very common problem, so I'm puzzled as to why there is no simple cure proven. It seems that I need to return to the Home Premium, but I thought I would try the forum before travelling.

  Hello

  That's the problem.

  Please read this article, in its entirety, by Ed Bott.

  The use of the Win 7 cumulative hotfix eliminates the problem.

  Jay

• Pavilion HPE h8 - 1360t: what USB should I use to create recovery media from Windows 7?

  All the instructions/troubleshooting I had clearly said to avoid USBs that are compatible to Windows 8.
  Now the question is, is that the information simply obsolete? If I can't have a recommendation on which particular USB I have to use? Thanks in advance.

  KingFeather, welcome to the forum.

  Here is a Flash drive that I used to Win 7, 8 and 10 of Win Win.  I think that you need a drive that has at least 8 GB of free space.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Desktop HP Pavilion HPE h8m: graphics (or other) to upgrade?

  Hi all, new to the forum.

  A week or two ago, I thought that I had an advance here (TAPI) on my problem, but now I can't find the thread despite several searches.  My apologies in advance if I'm posting in the right place or not by the rules of the forum. (try!)

  So here go us:

  I'm not much more than a PC gamer, but there is a new game, I just _have_ to play. My machine is now four years old and has problems (I'm naïve about computers, but I strongly suspect that it is the graphics card):

  My almost-grille-pain:

  • Windows 7 Home Premium 64-bit
  • Processor core AMD FX-6100 six [3.3 GHz, 6 MB L2/8 MB of Cache L3]
  • 6 GB OF RAM
  • 1 GB DDR3 AMD Radeon HD 6450 [DVI, HDMI, VGA adapter]
  • Audio beats

  Game Minimums:

  • Windows 7 64 bit
  • Intel Core 2 Duo 2.6 GHz or AMD Phenom 9950 Quad Core 2.6 GHz 4700 E
  • 4 GB of Ram
  • 1 GB ATI Radeon HD 5770, 1 GB NVIDIA GeForce GTX 460 or better
  • Direct X Version 11
  • 45 GB of available space
  • Map its compatible DirectX

  Recommended game:

  • Windows 7 64 bit
  • 3 GHz Quad Core
  • 8 GB RAM
  • 2GB 2 GB NVIDIA GeForce GTX 770 or better, ATI Radeon HD 7970
  • 45 GB of available space
  • Map its compatible DirectX

  I got the game to run (clunkily) until the beginning of the tutorial, but I'm to the point where it's unplayable. Speed reading/erratic graphs, and my mouse pointer is invisible. An invisible pointer was tolerable for a while as I could "guesstimate" its position and eventually get to the place that I had to click, but now it doesn't work at all. Besides, it's no funny.

  Issues related to the:

  1. Is the problem of the graphics as I suspect, or is - ability that something else (or both)?
  2. An upgrade can be made at my machine at a reasonable cost (say ~ $250 or less)
  3. More information is needed?

  I have the game tight until the lowest "computer application" (I don't know the tech talk) parameters, but it did not help.

  For those interested, the game is 2 XCOM. I've posted on the forums of 2K and got some advice, but wanted other opinions.

  Thanks in advance for any help,

  Rob

  Thank you for the additional information.

  I got the information you were looking for: product number: QV456AV - model: Elite h8-1100 CTO.  Please change you confirm and delete the Bill because it has your personal information.  Here is the Product Specifications page for this.

  I agree that your video card is the weakest component in the computer.  (There are several things to consider when you upgrade a video card: 1) power required to carry out. (2) the length of the card.  It must match with room for a good airflow). and (3) the BIOS of the motherboard.  The power supply unit (PSU) in the computer is 300W.  Most of the newer video cards require at least 400W runs correctly, with the exception of some EVGA cards that State a minimum of 300W.  However, these cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released October 19, 2011.  I suggest to contact EVGA Tech Support (1-888-881-3842) for help with your choice of cards.

  If you need to upgrade the PSU, I highly recommend Corsair products.  I normally recommend at least 500W; 600W would be even better.  The PSU is the backbone of the computer and not a place to save money.

  I think that 8 GB of memory is more than enough, and the processor is fine.  Another upgrade that would give you a major performance increase is an SSD.  Following recommendations of Crucial memory.  They make great products for OEM computers.  Also, when they recommend it they guarantee that it works.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Pavilion HPE h8 - 1360t: the graphics card upgrades

  My current system has used an AMD Radeon HD graphics card 7570.  I am interested in upgrading this map and looking for a recommendation for a mid range to high level card that corresponds to this case / motherboard.

  My system uses UEFI and I already know that I'll need to upgrade my power for something in the range of 500W.

  Thank you

  -Keith

  Hello

  The NVIDIA GTX 970 is a decent graphics card.  Because of the many brands and models of graphics cards, you need to open your PC and do a step inside. Please read this document posted on: a discrete video card selection Guide

  If you don't push monitor resolutions since 1920 by 1080 and average use game setting then the NVIDIA GTX 750 TI would be a good choice for use with a power of 300 watts with many games. However, the GTX 970 with a 500 Watt power supply would be good for many games even with the higher game settings.

  He'll come down between your choice of performance and the depth of your portfolio.