Desktop HP Pavilion p7: user profile service does not connect, cannot load user profile

Similar Questions

• Motorola surfboard SB5101 modem does not connect after loading Win 7 OS

  I had Win XP 32 bit and have now updated for Win 7 64 bit (I have a 64-bit processor) now my computer does not connect to my modem - Motorola Surfboard SB5101 even if styling check here says it should be OK.  When I try to connect I get this error: failed to connect #651, modem or other reporting device connection error.

  My service provider could not help and said my signal to connect is good.  I loaded the new drivers Vista 64 for my modem as it was the only rider to a 64 bit OS that I could find, in the hope that it would help.  No chance here no more.  Any suggestions?

  I guess that you connect the modem to your computer with a USB cable.  If your modem has an Ethernet output, use it instead.  The Ethernet connection does not require a pilot program and is more reliable than the USB connection.

• Remote Desktop on Windows 7 Professional 64-bit does not connect to my computer Windows XP VPN

  I recently updated from windows XP 32-bit to Windows 7 64 bit.  According to the same installation instructions, that I used on XP to connect to my computer to work through VPN & remote desktop is no longer working.  I can connect to the VPN connection without no problem, but when I use remote desktop to connect to the computer, it does not work.  I get the message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are all very well, so it must be another problem.  I also checked windows firewall remote desktop is allowed on the exceptions list.

  Any help would be greatly appreciated!

  I fixed, which was ultimately quite simple.  I changed the 3 settings, 1 - uncheck the TCP/IP v6 2 - in the options of the remote desktop, ADVANCED tab, I changed the server authentication for: connect and don't warn me.  3 - below, to connect from anywhere, settings...  I chose: do not use a remote desktop gateway server. \
  I checked the TCP/IP v6 and everything still works.
  Hope that helps someone.

• Satellite A305D-S6848 does not start - cannot load Windows

  The DISPLAY SHOWS "Windows failed to load because a required file is missing or corrupt... »
  file: ntoskrnl.exe
  status: 0xc0000098

  I DON'T HAVE AN INSTALLATION DISC, AND DON'T KNOW HOW TO GET SYSTEM OPERATIONAL RETURN?

  CAN SOMBODY IF YOU PLEASE HELP ME?

  Hello

  There seems to be a series of Toshiba laptops we and that's why the recovery process can be different on Toshiba notebooks European

  However, the recovery procedure must be mentioned in the manual of the user. Check this box

  First try this:
  Switch on and press F8.
  Select Safe Mode, and then try to start the Windows mode without failure.
  If this does not work, try to repair the computer option.

  I think the laptop must be equipped with HARD drive recovery. This means that you could recover the device without the use of the recovery diskette.

  As mentioned it's series American TV to laptop and I know that you must press the 0 key immediately after the laptop has been powered.
  This should start the recovery

• Desktop HP Pavilion p7-1016ukm: beats audio does not work on windows 10

  
  

  Hello:

  See if this driver IDT HD works.  Install and reboot the PC...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

• Re: Tecra 8100: CD-Rom does not - W2k cannot load drivers

  Hello

  I have Windows 2000 on my Tecra 8100. For two days, my cd-rom doesn't work anymore, because Windows cannot load one or more drivers.
  I did nothing special, except a game and using word and excel.

  Anyone got a solution for the problem, because I do not know much about computers.

  Additional info:
  Windows 2000 SP3

  CD-ROM:
  TEAC-CD224E-BA

  Kind regards

  Martijn

  Hello

  Sorry, but it will help get more info on CD/DVD drive.
  Optical drive is listed in Windows Explorer?
  What is the status in Device Manager?

• Satellite L655D - user profile service does not load

  I was not able to log in to my partner on a new user account, guard showing the message user profile service does not-
  I have already tried to use face recognition, but was not able to configure it correctly and delete the account.

  The problem of user accounts has been present since I deleted the account of recognition of faces.

  Any ideas how I can restore the user account created for someone else on this computer.

  Hello

  I think that there is already a solution for this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57534

  This seems to be a known issue of Windows and you can fix that running the Microsoft Fix this Microsoft Fix it 50446 problem provided by Microsoft

• Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

  "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

  Profile of user could not be added

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• How can I get my account? "the user profile service could not connect..." User profile can not be downloaded... »

  I can't access my account... message says: "the user profile service could not connect..."  User profile can not be downloaded... »

  Help, please...

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

  Original title: how to change a password for an administrator account that does not work properly?

  When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the steps in the article mentioned below and see if the problem persists.
  http://support.Microsoft.com/kb/947215
  
  Hope that helps.
   

• the user of Windows 8 service does not have the opening of the session; user not found.

  I can't sing on my PC. The display of error messages: SERVICE does NOT have THE USER LOGIN; USER NOT FOUND.

  I only have one user on my PC and its administrator. I tried the system restore and I did not work.

  Hello

  Please try this patch and see if that helps:

  http://www.kapilarya.com/user-profile-service-failed-the-logon

  Hope this helps, good luck :)

• Pavilion x 2-10-n109nl: Audio services does not

  Hi all,

  at one point in time and after any particular event, my laptop (Pavilion x 2-10-n109nl with Win10x64) started does not recognize the audio device. It displays a red x is close to the 'Volume' icon in the taskbar notification as if no audio device installed and lists an "unknown device" in Device Manager. Find that this unknown device has been "Intel ESS Audio Device (WDM)" and managed to install it with Intel drivers went back to 01/12/2016, so for the moment I had all audio devices is properly set up and works, but the Red Cross disappear and if I try to start Windows troubleshooting service it says "Audio services does not. This who can I try to do to get the problem resolved?

  Thank you all,.

  F.

  Hey @Ledbetter92,.

  Driver Audio Conexant is one that is registered in your page of drivers like Audio driver for you. This part is so good.

  Thanks for being patient and following all the steps! I very much appreciate the cooperation while trying to find a solution you did great! I wanted to make sure that I told you.

  You can try to do a reset of the BIOS. To reload the factory-installed BIOS configuration settings, perform the following steps:

  1. In the BIOS Setup utility, select the tab out.

  2. Select message Load Setup Defaults.

  3. Select Save Changes and Exit (pressing F5 and the Enter key will also load default configuration).

  4. Press ESC, then press Enter to exit the installation program.

  Source: reload the default settings

  Here is the document of HP Pavilion 10 - n100 x 2 detachable PCs-No Sound from computer speakers and Audio output connector that was created for this specific problem. You'll see below I have included the context of the document and the version numbers for each driver you need. Could you please check the versions currently installed on your laptop?

  Here are the steps in the document:

  No noise is through the computer speakers and the audio output connector headphone or external speakers are connected. An exclamation point (!) appears in the device on the audio device manager. This question is exposed on Windows 10.

  To resolve this problem, follow the steps to download and install the following SoftPaqs to update BIOS and install device drivers:

  1. Download and install the BIOS update.

  2. Download and install Chipset Intel graphics, camera and Audio Driver Pack.

  3. Download and install the Driver Audio Conexant.

  Updated HP Notebook System BIOS (Intel processors)

  • File name: SP73945
  • Version: F.06
  • Review: has

  Chipset Intel Graphics, camera and Audio Driver Pack

  • File name: SP72830
  • Version: 604.10146.2652.361
  • Review: has

  Conexant Audio driver

  • File name: SP72855

  • Version: 1.58.0.50

  • Review: has

  I would like to know how it goes

• HP Pavilion 15 laptop: HP Pavilion - Audio Service does not

  Hi I recently bought a new HP Pavilion 15 and the volume down icon to the right, footer has an 'x' in a red circle next to it. When I go over it, it says "audio service does not work. I currently have no sound on the laptop.

  No idea how this can be fixed please?

  Thank you

  Hi Tom,

  Try the following.

  Download the Realtek Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66107.exe

  When finished, press and hold the Windows key and press R.  In the run window, type devmgmt.msc and press ENTER.

  Expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66094.exe

  After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Let Windows load completely - it can automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click on the button set as default (it will be gray if already defined)-check if you now audio.

  If you have still no audio, hold down the Windows key and press R.  Type services.msc and press ENTER.  Search for audio Windows servive, right-click and select Properties.  If the service does not work, try to run.

  If you still receive the "Windows could not start the service windows audio on local computer» Error OX800706cc - the endpoint is double ' mistake, you're best bet is to do a Refresh as detailed on the link below.

  http://support.HP.com/us-en/document/c03538721

  Kind regards

  DP - K

• Error: 80070426-Windows Update may not install as Cryptographic Services does not start.

  Hello!

  As you can guess Windows Update is not installed for a few months. Cryptographic services does not start . CPP is the beginning.

  Error: 80070426

  Already tried a few suggestions MSKB.

  Method 2: Set Cryptographic Services to automatic, network logon. Result: Error (unsigned) 1083
  Method 3: Rename the Catroot2 folder
  Reregister DLL files that are associated with Cryptographic Services.
  However, suite couldn ' t be installed.

  regsvr32 initpki.dll
  regsvr32 gpkcsp.dll

  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll

  DCOM service - access denied when running.

  sfc/scannow couldn't fix some corrupted files.

  Computer HP laptop came with Vista pre-installed, so I do not have the repair disk.

  No doubt the system restore won't help, as I remember recently that c-Cleaner wiped the old restore points.

  NOD32 Antivirus + Spyware Doctor still running. Already run MSRT and Super Spyware, but nothing much.

  Kindly help!

  Kind regards

  Satyajit

  Diagnostic report (1.9.0011.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - GD2PK - BD3R2-44MV3
  The Windows Product Key hash: f7FPE6g/CLFmnJ4E6GbEU9Xn1sA =
  Windows product ID: 89572-OEM-7332166-00021
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6000.2.00010300.0.0.002
  ID: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D} (3)
  Admin: Yes
  TestCab: 0x0
  WGA version: registered, 1.9.9.1
  Signed by: Microsoft
  Product name: Windows Vista (TM) Home Basic
  Architecture: 0x00000000
  Build lab: 6000.vista_gdr.080917 - 1612
  TTS Error: M:20091104073513946-
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\Slsvc.exe[6.0.6000.16509]
  [File mismatch: C:\Windows\system32\drivers\Spsys.sys[6.0.5840.16389]
  [File mismatch: C:\Windows\system32\Slcext.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\advapi32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\kernel32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rpcrt4.dll[6.0.6000.16525]
  [File mismatch: C:\Windows\system32\authz.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\msvcrt.dll[7.0.6000.16386]
  [File mismatch: C:\Windows\system32\samlib.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\ntdsapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\dnsapi.dll[6.0.6000.16615]
  [File mismatch: C:\Windows\system32\ws2_32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\nsi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\user32.dll[6.0.6000.16438]
  [File mismatch: C:\Windows\system32\gdi32.dll[6.0.6000.16766]
  [File mismatch: C:\Windows\system32\msimg32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\powrprof.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\setupapi.dll[6.0.6000.16609]
  [File mismatch: C:\Windows\system32\oleaut32.dll[6.0.6000.16609]
  [File mismatch: C:\Windows\system32\ole32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\shell32.dll[6.0.6000.16774]
  [File mismatch: C:\Windows\system32\shlwapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\version.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winmm.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\oleacc.dll[4.2.5406.0]
  [File mismatch: C:\Windows\system32\mmdevapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wtsapi32.dll[6.0.6000.16553]
  [File mismatch: C:\Windows\system32\regapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\crypt32.dll[6.0.6000.16425]
  [File mismatch: C:\Windows\system32\msasn1.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\userenv.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\secur32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\netapi32.dll[6.0.6000.16764]
  [File mismatch: C:\Windows\system32\psapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\netrap.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wldap32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winbrand.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\iphlpapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\dhcpcsvc.dll[6.0.6000.16512]
  [File mismatch: C:\Windows\system32\winnsi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\dhcpcsvc6.dll[6.0.6000.16512]
  [File mismatch: C:\Windows\system32\gpapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\slc.dll[6.0.6000.16509]
  [File mismatch: C:\Windows\system32\gpsvc.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\sysntfy.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winsta.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\nlaapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\ncrypt.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\bcrypt.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mpr.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\credui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\cryptui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wintrust.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\imagehlp.dll[6.0.6000.16470]
  [File mismatch: C:\Windows\system32\dbghelp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mssign32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wininet.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\normaliz.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\iertutil.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\tapi32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rtutils.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rasapi32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rasman.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rasdlg.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mprapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\activeds.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\adsldpc.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\atl.dll[3.5.2284.0]
  [File mismatch: C:\Windows\system32\certcli.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winscard.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\netplwiz.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\urlmon.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\propsys.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\xmllite.dll[1.1.1002.0]
  [File mismatch: C:\Windows\system32\mlang.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\advpack.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\apphelp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\msiltcfg.dll[4.0.6000.16386]
  [File mismatch: C:\Windows\system32\shunimpl.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\devmgr.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\newdev.dll[6.0.5054.0]
  [File mismatch: C:\Windows\system32\dwmapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winspool.drv[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\cscapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\windowscodecs.dll[6.0.6000.16740]
  [File mismatch: C:\Windows\system32\ntshrui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\feclient.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\shdocvw.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\imm32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\msctf.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\duser.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16386_none_9ea0ac9ec96e7127\gdiplus.dll[5.2.6000.16386]
  [File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16550_none_56f0fd51b4f462f8\gdiplus.dll[hr = 0 x 80070002]
  [File mismatch: C:\Windows\system32\msrating.dll[7.0.6000.16386]
  [File mismatch: C:\Windows\system32\ieframe.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\msi.dll[4.0.6000.16386]
  [File mismatch: C:\Windows\system32\mshtml.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\msls31.dll[3.10.349.0]
  [File mismatch: C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_87e0cb09378714f1\comctl32.dll[5.82.6000.16386]
  [File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_40339432230aebeb\comctl32.dll[hr = 0 x 80070002]
  [File mismatch: C:\Windows\system32\comdlg32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\printui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\cfgmgr32.dll[6.0.6000.16609]
  [File mismatch: C:\Windows\system32\puiapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\hlink.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\imgutil.dll[7.0.6000.16386]
  [File mismatch: C:\Windows\system32\usp10.dll[1.626.6000.16386]
  [File mismatch: C:\Windows\system32\inetcomm.dll[6.0.6000.16669]
  [File mismatch: C:\Windows\system32\msoert2.dll[6.0.6000.16480]
  [File mismatch: C:\Windows\system32\ieui.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\efsadu.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mfc42u.dll[6.6.8063.0]
  [File mismatch: C:\Windows\system32\odbc32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\oledlg.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\linkinfo.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\query.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\clbcatq.dll[2001.12.6930.16386]
  [File mismatch: C:\Windows\system32\cabinet.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\scecli.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\w32topl.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rpchttp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winhttp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\fwpuclnt.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\ktmw32.dll[6.0.6000.16386]

  Other data-->
  Office details: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D}1.9.0011.06.0.6000.2.00010300.0.0.002x 32*-*-*-*-44MV389572-OEM-7332166-000212S-1-5-21-3747016915-1105364745-1034703816Hewlett-Packardlaptop Presario V6500 Hewlett-PackardF.2A 20080222000000.000000 + 000A4313507018400EE40090409India Standard Time(GMT+05:30)03HPQOEMSLIC-MPC10310312C0A25836FDBE5ACFmDbcrRY1pTOcrz4ZUZRHhpUuc0 = Microsoft Office Enterprise 2007 89388 726-2958074-6564314100Microsoft Office home and Student 20071219

  Spsys.log Content: U1BMRwEAAAAAAQAABAAAAC58AgAAAAAAYWECADAgAADCBCA/81zKARhDs/4hWdo7Xkl9D+HKpni6Sfv7jmoHEBVqqW/xcrQYytms9RtRtLWsIPXcLJpmwOfDvX0zCybmDilyQLttVIyTRhimAiUiBLOYhz3eEQj3sEGnmR0ReJ9KlWCJouxq6PAIwHwHVMfvNauSbFvmaTCDPKtQZQFIQcDXIAwFGl6D9S/GUDYecePFRKM/leS97bxOVVm9fICZUkfHdDNbo72qUqYYmAlRJO05+WV1r70w2O6Pl99gqTnSYR4j0FashTOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAw=

  License data-->
  The software licensing service version: 6.0.6000.16509
  Name: Windows Vista HomeBasic edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: 199086aa-6cb8-4e5b-b698-f2be56f1e8ee
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89572-00146-321-600021-02-16393-6000.0000-0492008
  Installation ID: 234075993312598255872244522405847072649516093605215141
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
  Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
  Partial product key: 44MV3
  License status: licensed

  --> HWID data
  Current Hash HWID: QAAAAAEABwABAAIAAgABAAAAAwABAAEAnJ9ERYTHdhu84yC + gASIzAaYmGC6ZEQsznDy9J4v6lrYfiqsrFZ4qg is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP NVIDIA MCP67-M
  SRAT AMD HAMMER
  HPET PTLTD HPETTBL
  START PTLTD $SBFTBL$
  MCFG MCFG PTLTD
  TCPA Phoenix x
  SSDT PTLTD POWERNOW
  SLIC SLIC-MPC HPQOEM

  Thank God!

  Finally, I worked it out myself. But it's painful to watch than virtually any other that Uday has responded to my problem. Something I've been waiting for so eagerly.

  I applied my common sense and defragmented the dirives then sfc/scannow, and it worked. Cryptographic Services said when I began to log in as network account. So my problem is solved. Now, windows update works fine.

  Interestingly, Microsoft Fix it, says it cannot start the Cryptographic Services. Are God, while the _____ you supposed to difficulty? It made Internet Explorer icon on my desktop and other places.

• SSO Presentation Services does not start

  Hi all
  
  I'm currently implementing SSO in the windows environment. I followed the stets as provided in the deployment guide.
  
  1. create the Replicator user: success
  2. credentials look-alike user was added to the credential store: success
  3 configured Oracle BI Presentation Services to identify the store of credentials: success
  4 but when I configure the instanceconfig.xml file to run in a SINGLE authentication mode, presentation Services does not start.
  
  This is the code that was added to the instanceconfig.xml < ServerInstance > article
  
  < Auth >
  < SSO enabled = "true" >
  < ParamList >
  < Param name = 'seem the IDENTITY '.
  source = "serverVariable.
  nameInSource = "REMOTE_USER" / >
  < / ParamList >
  < / SSO >
  < / Auth >
  
  Please note this point 3 i.e. adding credentials to the instanceconfig.xml file presentation services is restartnig.it, it's only when I add to the foregoing code it fails.
  
  The system error I get is
  "The Oracle BI Presentation Server service stopped with error 4294967295 (0xFFFFFFFF) special service."
  
  Kind regards
  Bla

  The problem has been resolved. I tried different combinations to copy paste and several reboots of the Referral Services to make it work.

  Can I get my points now? :-)

  Again my understanding is that after you have configured the details below, I should be able to bypass the authentication process (OBIEE login screen) and see the
  Dashboard directly when I switch on the connection URL. But in my case it is not the case because I put the credentials once again.
  Is there anything else I need to configure. Just trying to make single sign with Windows so when the user logs on to Windows desktop
  and passes the URL to see the OBIEE dashboards.

  Your understanding is wrong, but I suggest that to start a new thread as this if a different issue that is completely different from that described in this thread.