Desktop memory

Similar Questions

• upgrade of desktop memory

  
  

  BF13, I don't think that memory in the link you provided will work.  The motherboard supports Dual-Channel memory.  It is faster than the modules in the link.

  Here is a link to HP Store.  I suggest you contact them to ensure that you purchase the correct memory.  They should be able to help you.

  Let me know if you need assistance.

• HP p6310f pavillian: desktop memory

  My daughter lives in another State and has visited a week before and dropped off an HP computer, p6310f.  I plugged in and turned it and it has 2 problems.  I will only address one at a time. The computer would not start.  I used my computer to search online to HP for the p6310f features.  I took a mental note on the specs.  I lit the p6310f and press F - 10 to look over the bios settings.  The profile for HP for the p6310f indicates the memory module DDR3 M2N78 - motherboard "is supported.  The BIOS tells me there are (3) memory modules DDR2 installed.  I checked the MB model number and that's okay.  I read the info on the memory modules and they are DDR2.  Is the spec HP p6310f bad sheet when declaring the M2N78 - THE motherboard only supports DDR3 memory strips, or are the memory modules DDR2 badly installed?  I don't know the history of this computer and my daughter she recently obtained a military person being transferred abroad.  I would appreciate any information anyone can provide on this issue. Thank you

  Hello:

  It seems that the info attached to the support page for this model may be incorrect.

  Here is another page, the same motherboard having demonstrated that it has DDR2 memory.

  http://support.HP.com/us-en/document/c01635734

  If you have confirmed that the stickers on the memory of State it's DDR2 and so not the BIOS, then it's DDR2.

  It is physically impossible install memory DDR2 DDR3 slots and vice versa.

  The notch in the memory is divided into different locations on DDR, DDR2, and DDR3 memory.

  DDR types operate with voltages different and incompatible with other DDR type.

  That's why the notches in the memory are cut in different places.  To avoid shorting the motherboard or memory modules by installing the memory of the wrong type.

• Failed to upgrade memory Presario SR1800NX desktop PC

  Hello

  I have a Presario SR1800NX desktop PC, for 4 years.  The HP "Product page" Web page for this computer shows installed at the factory 512 Mo PC2-3200, 240-pin, DDR2 SDRAM.

  I removed the 512 MB factory card and installed a Crucial 1 GB DDR2 PC6400 800 MHz card ( http://www.bestbuy.com/site/Crucial+Technology+-+1GB+DDR2+UDIMM+Desktop+Memory/1359891.p?id=12182533... ).  Immediately after switching on machine beeps continuously and the screen remains black.  Tried another but idential Crucial 1 GB card and got the same failure.  Removed Crucial and card of 512 MB factory reinstalled and it works very well.

  HP driver download webpage, I installed the update of the BIOS & update driver for ATI chipset.  The Crucial RAM still does not work.

  This PC has a known issue with RAM PC6400?

  I'm sorry, my brother, is not correct.

  Index an SRAM card speed is maximum speed; It is backward compatible with the slower bus of the same type and form factor.

• HP Pavilion Media Center a1440: HP Pavilion Media Center a1440n Desktop PC ram compatibility upgrade

  Can I replace the ram (1 x pc-4200) original with 4 x1GB 240-pin DDR2 667 (PC2-5300) ECC SDRAM Desktop memory?

  Eastvanray, welcome to the forum.

  This is memory that is supported by the motherboard:

  Four connectors DIMM DDR2 240-pin

  Supports PC2-3200 (400 MHz), PC-4200 (533 MHz) and PC-5300 (667 MHz) DDR DIMM

  HP/Compaq approved maximum memory is 4 GB *.

  Note: * actual available memory may be less

  The memory that you want to install says it is ECC.  I think that the motherboard use more memory non - ECC.  Furthermore, I believe that your OS is 32-bit.  Therefore, only 3.25 GB of memory would be usable.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Pavilion a6755f: upgrade to 16 Gb memory

  My Pavilion a6755f Vista 64 bit according to the standard sheet can except 16 GB memory sticks, I bought 4 x 4 GB DDR2 240 pins for the double system, he exepts 2 x 4 8 gb in the blue of 2 slots fine but does not except the other 2 x 4 GB set in 2 slots for a total of 16 GB black. The Bios reads the 2 x 4 8 fine GB but with 4 x 4 16 GB it reads 328 MB with a squickly sign in front of him.

  Any body can help me on this one thanks

  The trick to this is to only buy and install memory modules memory major manufacturers that ensure compatibility of their modules with your PC. Crucial memory, Corsair, Kingston, include the well known memory manufacturers.

  Try to upgrade by matching with the published desktop memory module specifications [specifications is, as you know by now, a shot in the water and a financial risk.]

  An example of this is seen in the following image.

  Here's the URL

  http://www.crucial.com/USA/en/compatible-upgrade-for//Pavilion-a6755f

  

• Dc7800 compatibility memory

  Hi I have a DC7800 SFF and I am planing on improving memory to its Max 8 G.

  I want to know if this memory would be sustained:

  G.SKILL 8 GB (4 x 2 GB) 240-pin DDR2 SDRAM DDR2 800 (PC2 6400) Quad Kit desktop memory model F2-6400CL5Q-8GBPQ

  I'm confused because some website says only DC7800 UDIMM support...

  Could you point me in the right direction?

  Thank you

  Hello:

  I put this G.Skill memory in my dc7800 CMT.

  2 of these 4 GB kits.

  http://www.Newegg.com/product/product.aspx?item=N82E16820231207

  8 GB works fine.

• The Desktop (6823w) upgrade

  Hey guys! I was wondering if I can get a feedback about upgrading my computer. I recently bought a 6823w for a good price and wish to update. Fortunately, I did my homework before this post and would be grateful if someone can check links (all Newegg) and verified that they should all sit and work.

  PSU-(Worried if it's compatible... done some hw and found a thread on the well with 6823w 500w version)

  http://www.Newegg.com/product/product.aspx?item=N82E16817139028

  RAM-(not worried for this one)

  http://www.Newegg.com/product/product.aspx?item=N82E16820148347

  Graph-(mainly worried if she's holding in the case)

  http://www.Newegg.com/product/product.aspx?item=N82E16814161372

  Processor-(pas vraiment inquiété àle sujet de celui-ci, soit.) Everything's going to be difficult to install)

  http://www.Newegg.com/product/product.aspx?item=N82E16819103849

  Main concerns also include the temperature. I understand the processor and graphics can run more hot right now, however, I perfectly agree with opening the case and let the heat. My room tends to stay cool in the winter, in any case. Input would be much appreciated... Thanks in advance!

  CORSAIR Builder Series CX600 V2 600W ATX12V v2.3 80 MORE certified Active PFC Power Supply
  To adjust as it is the same size as that of the CX500 which is known to adapt.

  Crucial 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1333 (PC3 10600) desktop memory model CT2KIT51264BA1339

  Should work, but is not Crucial to recommend security... Here's what recommend Crucial .

  HIS Itceq X Turbo H695QNT2G2M Radeon HD 6950 2 GB 256 - bit GDDR5 PCI Express 2.1 x 16 HDCP Ready CrossFireX Support video card with Eyefinity
  Should work, but is going to be a very tight is shaped.

  AMD Phenom II X 6 1090 t. Black Edition Thuban 3.2GHz Socket AM3 125W processor with Six cores office

  This CPU exceed the TDP for your motherboard listed by HP.
  Max TDP: 95W
  Motherboard supports the following processor upgrades:
  NOTEnly Socket AM3 processors are supported with this motherboard.
  AMD Phenom II X 6 Six-Core (core Thuban) 10xxT
  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (core Deneb)
  AMD Phenom II X 3 Triple-Core (heart Heka) 7xx/7xxe
  AMD Phenom II X 2 5xx (nucleus of Callisto)
  AMD Athlon X 4 6xx/6xxe (undactylopodite)
  AMD Athlon X 3 4xx/4xxe (Rana)
  AMD Athlon X 2 2xx/2xxe (Regor)
  1xx AMD Sempron Single Core (core Sargas)

  Frank

• Helps control memory

  Can you help me?

  I have a HP Pavilion Media center m8277c. This is an Intel Core 2 Duo CPU E6750.2.66 Ghz, 2.66 GHZ.

  RAM and 400 GB 2 GB drive. With a max. Cap. RAM to 8 GB. O.S. 32-bit Windows Vista.

  I bought windows 7 32-bit and 4-bit. I also bought 8 GB Kingston HyperX T1 series RAM (4x2Go).

  My question is. Have I not the right stuff to memory. I want to run the 64-bit windows. Here are the reference numbers for Kingston.

  240 pin DDR2 SDRAM 1066 (PC28500) Dual Channel Kit Desktop Memory Model #KHX8500D2T1K2 / 4G?

  I just ordered, but now I'm not sure I got the right one.   Can you help me? Thank you

  Here are the specifications of your HP m8277c desktop. According to the specifications, the following memory upgrades are supported;

  Dual channel memory architecture
  Four connectors DIMM DDR2 240-pin
  Supported DIMM types:
  DDR2-800
  DDR2-667
  Memory non - ECC, unbuffered
  Supports DIMM DDR2 2 GB modules
  Supports 8 GB on 64-bit PCs
  Supports 4 GB * on 32-bit PCs

  It is for your HP m8277cKingston system specific memory. Kingston KHX8500D2T1K2 / 4G you have prescription is DDR2-1066 and is faster than the speeds of memory support for HP. It is possible that faster memory will be relief at DDR2-800 when it is installed in your system. The memory that you have ordered may or may not work depending on a number of factors. If you bought the memory of a blade to purchase a large political return, try it and if it does not return. Normally, it is suggested to get the upgrades of memory support.

  Frank

• I'm upgrading from my memory and wonder what I can use...

  Setup: HP Pavilion p7 - 1370 t.

  Windows 7

  Motherboard of Carmel (single channel architecture)

  I want to upgrade to 8 GB but cannot pick up a good set of 2 x 4 GB and edge... at the same time I was wondering the performance of memory dual channel single channel iron starters:

  http://www.Newegg.com/product/product.aspx?item=N82E16820231428

  It will work, and it will operate a maximum capacity?

  Thanks in advance...

  Hello

  The memory that you have selected

  "G.SKILL Ripjaws X Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model F3-12800CL9D-8GBXL.

  works perfectly according to the configuration of the memory of your PC.

  Memory Must select one of the following options:

  • 4 GB (2 x 2 GB) DDR3 PC3-12800 (turns the PC3-10600 with Sandy Bridge CPUs)

• HP dc7100 SSF, XP Pro, Mem: DDR PC2700, DDR PC3200 non - ECC, 512 MB memory

  I gave this computer in a family member to replace another computer, she has 256 MB in each of the 2 locations. the other 2 units are empty... The old computer is a HP Pavilion a610y with 512meg memory on a memory card. On the label, it is identified as: 0425 PC3200U-30330

  HYMD264646B8J-D43

  512MB DDR 400 MHz CL3.0

  The dimensions of this card are: 5 1/4 inches long and 1 1/4 inches in height.

  This will agree and will work in the computer of SSF series HP-Compaq dc7100?

  Dimensions desktop memory are a standard size, only the notches in the memory stick changes depending on the type. PC3200 notches are the same as pc2700 & it "should" work in the dc7100, but will operate at pc2700 speed since all the memory will operate at the speed of the slowest in the machine.

  Only way to know for sure if it is compatible is to try it. Support white tabs at each end of the slot memory to open it. Match the tab inside the slot the memory stick guts to be sure that it is oriented correctly. Press firmly until the memory is seated and white paws nearby on the ends. Turn on the power and start. If you get the boot and no beeps error, you should be good. Once in Windows, check to see if the new memory is recognized. (You can also enter the BIOS to check before Windows starts)

• Windows 7 memory 64-bit dump blue screen while playing the Star craft 2 and Battlefield 3 in and out of sleep.

  Original title: 64-bit Windows 7 memory dump blue screen

  Specifications of the computer

  CPU: Zambezi FX-4100 3.6 GHz (Turbo 3.8 GHz) AMD Socket AM3 + 95W Quad-Core Desktop Processor FD4100WMGUSBX

  Motherboard: ASUS M5A99X EVO AM3 + AMD 990 X SATA 6 Gb/s USB 3.0 ATX AMD motherboard with UEFI BIOS
  GPU: 01 G-P3-1460-KR of EVGA, GeForce GTX 560 (Fermi) 1 GB 256 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready SLI Support video card
  RAM: G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1066 (PC3 8500) desktop memory model F3-8500CL7D-8GBRL
  PS: CORSAIR Builder Series CX500 V2 500W ATX12V v2.3 80 MORE certified Active PFC Power Supply
  SSD: OCZ Solid 3 VTX3-25SAT3 - 60 G 2.5 "SATA III 60 GB MLC "
  HARD disk: SAMSUNG Spinpoint F3 HD103SJ 1 TB 7200 RPM / MIN SATA 3.0 Gb/s 3.5 "drive hard internal-Bare drive
  OS: 64 - bit Windows 7 Home Premium
  It's a new generation and I have all updated drivers, bios, and Windows updates. I set my virtual memory for two hard drives (min: 8000/Max: 24000). I run PrecisionX in the background with stock settings, and Asus II HAVE suite and my CPU is overclocked to 3.8 (recommended turbo). I run CNettoyez on a regular basis to solve registry problems.
  I had my new blue screen of generation of dumps from memory, about four times since I built it. It comes into play, i.e. of Starcraft 2 and Battlefield 3, and once when he came out of sleep. I ran a memory test, and he says that he has no problem. Suggestions or anything like that, I need to test again?
  On a side note: don't suck my HDD or is it decent? 1 TB, 3 Gb/s, 32 MB cache. My OS is on my SSD as well as Torchlight 2, and the rest of my stuff on my disk HARD of Starcraft 2 and Battlefield 3, media and stuff.

  Thanks for your help. I think that I thought about it. The "timing" on my ram is disabled, so I manually set in the BIOS and see what happens.

  Also, it would cause W7 to freeze coming out of sleep? I had this recent problem where when my computer out of sleep and it wouldn't wake up and my CPU LED should blink slowly. After turned it off, I will re-start and it would be nice, but now it is that whenever I put it in sleep mode.

• Upgrade memory - this computer does he?

  I have a Pavilion XE783 desk top. It's an old computer that I would like to use for my children. I don't know how many GB of RAM, it came with but I would add more if possible. Could you tell me what is the max RAM upgrade for my machine? If necessary. I opened the machine and it has two empty slots, but I don't know if they are for memory or something else. Exactly what kind of RAM would I look online or in a store?  Is there another suggestion to improve the overall speed of my machine? Thanks in advance.

  Max Ram is 512 MB and it has 2 slots, so you would need 2 x 256 meg PC100 desktop memory modules.

  Online memory store

  Above is a link to a picture of the memory and a place to get it for about $50 for 2 x 256 sticks. I won't answer from this seller, but at least it shows you what you need. If I remember this model memory is hard to get, being upwards under the power.

  It has a processor Celeron 700 so with 512 memory he would go quite well Windows XP and Windows 2000 really well.

  He came originally with Windows ME, which is a train wreck, an operating system, but for children to school stuff and some simple games that would work. I just would not ME on a computer to the internet.

• G.Skill memory upgrade. I hope it's okay?

  So since I upgraded my power supply and graphics card, I decided, that its good, we will increase the RAM.

  I checked all the sites for upgrade details and it boiled down to G.Skill.

  G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1066 (PC3 8500) desktop memory model F3...

  I will also buy a single module of 4 GB of RAM, which I will install using the Tri-channel.

  Anyone want to confirm that my office: HP Pavallion Elite 170f mobo will accept it? This way I can rest assured at night and make a happy purchase.

  Thank you!

  HP Pavallion Elite 170f w / Antec EarthWatts 650 POWER supply
  I7 - 920, 12 (3 x 4 GB) G.Skill DDR3 1066, EVGA GTX 560 (SC), 1 TB Hitachi 7200 RPM HDD
  Samsung LCD 27 "monitor
  Come on... San Diego Super Chargers!

  Hello

  My e9280t (truckee mobo) originally shipped with 9 GB (four DIMMs of 2 GB and a 1 GB dimm memory) with an open slot.  I pulled the one 1 GB dimm and installed two DIMMS of 2 GB to stimulate the system to 12 GB.

  I have used CPU - Z to check dimm specifications and purchased the corresponding DIMMS exactly as the original 2 GB DIMMS.

  Your case is slightly different, but you need to match the timings of 4 GB with what to avoid potential problems. Generally faster DIMMS will clock down to the slowest DIMM, but there are no guarantees in life.  Find out what the return policy is before you buy.

  If you need to go ahead and buy three 4GB DIMM and remove all DIMMs and install the new DIMM Bank 0 of each channel and the everything works.  The diagnosis of HP memory startup made a reasonable job to test the DIMMs. Or you can download the memtest86 iso and burn to disk using the Imgburn.

  Once you are convinced that the new DIMMS are good then fill in the blanks with three DIMMs of 2 GB. Re-run the diagnosis.

  BTW, Windows 7 Home Premium will limit memory 16 GB , so you will need Pro, company Ultimate addressing more than 16 GB.

• After the effect CC 2015 - KERNEL_SECURITY_CHECK_FAILURE (memory dump)

  Hello

  As is obvious, I had a problem after installation of AE and it gives me a blue screen with a message above (KERNEL_SECURITY_CHECK_FAILURE). It seems that there is a failure of memory between AE and another software or driver. So I analyzed Memory.DMP file with WinDbg and gave me a result below.

  As you can see, I discovered, file dxgkrnl.sys with AEGPUSniffer.e process of do a memory crash. I have to say befor installation AE I uninstalled drivers for my graphics card (Geforce and Intell) and installed a pilot seller directly but AE has a problem with DirectX. (my edition of DirectX is 12)

  
  

  Here is the Configuration of my system:

  
  

  Laptop: HP with a UEFI Firmware (start secure power off)
  

  Windows 10 edition 10586

  RAM: 16 GB

  Graphics cards: Intel internal (1 GB) and dedicated Geforce GTX (4 GB)
  

  CPU: 2.3 GH core i7 (quad core and 8 logical processors)

  HARD DRIVE: 1 TB

  All drivers up to date

  
  

  Well, any help will be appreciated. If there is no any way to make it correct, can I do it just with a new edition of EI or will be the same?
  

  
  

  
  

  Debug version of Microsoft Windows (R) 10.0.10586.567 X 86

  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Babak\Desktop\MEMORY. DMP]

  The Bitmap core dump file: the kernel address space is available, the user address space will be may not be not available.

  Symbol search path is: srv *.

  Executable search path is:

  Windows Kernel Version 10586 MP (8 procs) free x 64 10

  Product: WinNt, suite: TerminalServer SingleUserTS

  By: 10586.17.amd64fre.th2_release.151121 - 2308

  Computer name:

  Core = 0xfffff802 '6fa00000 PsLoadedModuleList = 0xfffff802' 6fcdec70

  The debugging session: killed Dec 29 01:11:09.512 2015 (UTC + 08:00)

  System Uptime: 0 days 0:00:54.331

  Loading the kernel symbols

  ........................................................... Page 105d4a not present in the dump file. Type ".hh dbgerr004" for more details

  ....

  ................................................................

  .................................................

  Loading user symbols

  PEB is paginated on (Peb.Ldr = 00000000' 002e2018).  Type ".hh dbgerr001" for more details

  Loading unloaded module list

  .........

  *******************************************************************************

  *                                                                            *

  * Bugcheck analysis *.

  *                                                                            *

  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 139, {3, ffffd00024267490, ffffd000242673e8, 0}

  Page 11b 860 not present in the dump file. Type ".hh dbgerr004" for more details

  Page 110e88 not present in the dump file. Type ".hh dbgerr004" for more details

  110515 page not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  Probably caused by: dxgkrnl.sys (dxgkrnl! DXGDEVICE::DestroyAllDeviceState + 1cb)

  Follow-up: MachineOwner

  ---------

  7: kd >! analyze - v

  *******************************************************************************

  *                                                                            *

  * Bugcheck analysis *.

  *                                                                            *

  *******************************************************************************

  KERNEL_SECURITY_CHECK_FAILURE (139)

  A core component has damaged a critical data structure.  Corruption

  could potentially allow a malicious user to take control of this machine.

  Arguments:

  Arg1: 0000000000000003, a LIST_ENTRY has been corrupted (i.e. double deletion).

  Arg2: ffffd00024267490, the address of the frame of trap for the exception that caused the error checking

  Arg3: ffffd000242673e8, address of the exception record for the exception that caused the error checking

  Arg4: 0000000000000000, reserved

  Debugging information:

  ------------------

  110515 page not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  Page 1280 not present in the dump file. Type ".hh dbgerr004" for more details

  DUMP_CLASS: 1

  DUMP_QUALIFIER: 401

  BUILD_VERSION_STRING: 10586.17.amd64fre.th2_release.151121 - 2308

  SYSTEM_MANUFACTURER: Hewlett-Packard

  SYSTEM_PRODUCT_NAME: HP ENVY 15 Notebook PC

  SYSTEM_SKU: K8U61PA #UUF

  SYSTEM_VERSION: 097F120000405F10000310100

  BIOS_VENDOR: Insyde

  BIOS_VERSION: F.22

  BIOS_DATE: 25/11/2014

  BASEBOARD_MANUFACTURER: Hewlett-Packard

  BASEBOARD_PRODUCT: A 22-0

  BASEBOARD_VERSION: KBC Version 83.12

  DUMP_TYPE: 1

  BUGCHECK_P1: 3

  BUGCHECK_P2: ffffd00024267490

  BUGCHECK_P3: ffffd000242673e8

  BUGCHECK_P4: 0

  TRAP_FRAME: ffffd00024267490-(.trap 0xffffd00024267490)

  NOTE: The frame trap does contain not all registers.

  Some registry values can be set to zero or incorrect.

  Rax = ffffe0017d079730 rbx = 0000000000000000 rcx = 0000000000000003

  RDX = ffffe0017d045890 rsi = 0000000000000000 rdi = 0000000000000000

  RIP = fffff8026fb59d82 rsp = ffffd00024267620 rbp = ffffd00024267729

  R8 = ffffc001f8dfe3f0 r9 = 0000000000000003 r10 = 7fffc001f8dfe3f0

  R11 = 7ffffffffffffffc r12 = 0000000000000000 r13 = 0000000000000000

  R14 = 0000000000000000 r15 = 0000000000000000

  iopl = 0 nv up ei pl nz na po cy

  NT! : FNODOBFM: 'string' + 0x8c82:

  fffff802'6fb59d82 cd29 int h 29

  Reset the default scope

  EXCEPTION_RECORD: ffffd000242673e8-(.exr 0xffffd000242673e8)

  ExceptionAddress: fffff8026fb59d82 (nt! FNODOBFM: 'string' + 0x0000000000008c82)

  ExceptionCode: c0000409 (security check failure or stack of saturation of buffer)

  ExceptionFlags: 00000001

  NumberParameters: 1

  Parameter [0]: 0000000000000003

  Sub-code: 0 x 3 FAST_FAIL_CORRUPT_LIST_ENTRY

  CPU_COUNT: 8

  CPU_MHZ: 8f7

  CPU_VENDOR: GenuineIntel

  CPU_FAMILY: 6

  CPU_MODEL: 3 c

  CPU_STEPPING: 3

  CPU_MICROCODE: 6, 3 c, 3, 0 (F, M, S, R) GIS: 1st ' 00000000 (cache) 1 ' 00000000 (init)

  DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT

  BUGCHECK_STR: 0 X 139

  Nom_processus: AEGPUSniffer.e

  CURRENT_IRQL: 2

  Error_code: (NTSTATUS) 0xc0000409 - the system detected an in this application the stack-based buffer overflow. This overrun could could allow a malicious user to take control of this application.

  EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - the system detected an in this application the stack-based buffer overflow. This overrun could could allow a malicious user to take control of this application.

  EXCEPTION_CODE_STR: c0000409

  EXCEPTION_PARAMETER1: 0000000000000003

  ANALYSIS_SESSION_HOST: HP-ENVY15

  ANALYSIS_SESSION_TIME: 29/12/2015 17:10:58.0743

  ANALYSIS_VERSION: 10.0.10586.567 x86fre

  LAST_CONTROL_TRANSFER: from fffff8026fb4d2e9 to fffff8026fb42760

  STACK_TEXT:

  ' ffffd000 ' 24267168 fffff802' 6fb4d2e9: 00000000'00000139 00000000'00000003 ffffd000 ' 24267490 ffffd000 ' 242673e8: nt! KeBugCheckEx

  ' ffffd000 ' 24267170 fffff802' 6fb4d610: 00000000 ' fffff802 00000000 ' 6fa3272f 00000000'00000000 00000000'00000000: nt! KiBugCheckDispatch + 0 x 69

  ffffd000 '242672b 0 fffff802' 6fb4c7f3: ffffe001 '7b2bf010 ffffe001' 7b2bf010 00000000 00000000' ffffe001 7 d 168270: nt! KiFastFailDispatch + 0xd0

  ffffd000 ' 24267490 fffff802' 6fb59d82: ffffc001 'f8dfe330 ffffc001' f8dfe3f0 00000000'00000000 00000000'00000000: nt! KiRaiseSecurityCheckFailure + 0xf3

  ' ffffd000 ' 24267620 fffff801' 4871147 b: ffffc001 ' ffffc001 00000000 'f7a6e010 ffffc001' f7a6e100 ffffc001 ' f7a6e100: nt! : FNODOBFM: 'string' + 0x8c82

  ffffd000 ' 24267650 fffff801' 48710653: ffffc001'f7a6e010 00000000'00000000 00000000' 0000000b 00000000 00000000': dxgkrnl! DXGDEVICE::DestroyAllDeviceState + 0x1cb

  ffffd000 ' 24267690 fffff801' 486f3717: ffffc001 ' f7a6e010 ffffc001 'f8dfe330 ffffc001' f8dfe330 ffffe001 ' 7cf74080: dxgkrnl! ADAPTER_RENDER::DestroyDevice + 0xa7

  "' ffffd000 ' 242676 c 0 fffff801 ' 486f00b4: 00000000 ' 00000100 ffffc001 'f8dfe330 ffffc001' f8dfe330 fffff960 ' c5492d90: dxgkrnl! DXGPROCESS: destroy + 0x2bf

  ffffd000 ' 24267790 fffff960' c53b6c9c: 00000000' 00001cb0 fffff901'407 a 3730 00000000 '00000007 00000000' 00000000: dxgkrnl! DxgkProcessCallout + 0 x 64

  ffffd000 '242677f0 fffff960' c5035cb9: fffff901'407 has 3730 fffff901 '407-3730 ffffe001' 7b72c080 00000000 00000001': win32kbase! GdiProcessCallout + 0x8c

  ffffd000 ' 24267870 fffff960' c53d08cb: ffffd000'24267 has 48 ffffd000 242679 c 0 00000000'00000000 00000000'00000007: win32kfull! W32pProcessCallout + 0xd9

  ' ffffd000 '242678-0 fffff802' 6fdfc262: ffffd000 ' 242679 c 0 ffffe001 ' 7b3e42b0 00000000'00000000 00000000'00000000: win32kbase! W32CalloutDispatch + 0x6b

  ffffd000 ' 24267910 fffff802' 6fe06ddf: ffffe001 '7b3e42b0 00000000'00000000 00000000'00000000 ffffe001' 7b72c080: nt! PsInvokeWin32Callout + 0x42

  ' ffffd000 ' 24267950 fffff802' 6fe812f2: ffffe001 ' 00000007 ffffe001 '7cf74080 ffffe001' 7cf74080 ffffe001 ' 7b72c080: nt! PspExitThread + 0x49b

  ffffd000 '24267-90 fffff802' 6fb4cfa3: ffffe001 ' 7cf74080 ffffe001 '7b72c080 ffffd000' 24267b 80 ffffd000 ' 24267b 80: nt! NtTerminateProcess + 0xde

  ffffd000'24267 b 00 00007ff8'14085364: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceCopyEnd + 0x13

  00000000' 0014fd98 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x00007ff8'14085364

  STACK_COMMAND: kb

  THREAD_SHA1_HASH_MOD_FUNC: a0a5514a4d87706527c6f92c37842ea8c43b81ac

  THREAD_SHA1_HASH_MOD_FUNC_OFFSET: 11718e5c925d2d833f63315284a04f89616e7880

  THREAD_SHA1_HASH_MOD: c9f3f8c71ac99eb021b386cc891dde1c61018273

  FOLLOWUP_IP:

  dxgkrnl! DXGDEVICE::DestroyAllDeviceState + 1cb

  fffff801'4871147 b 488b4b50 mov rcx, qword ptr [rbx + h 50]

  FAULT_INSTR_CODE: 504b8b48

  SYMBOL_STACK_INDEX: 5

  SYMBOL_NAME: dxgkrnl! DXGDEVICE::DestroyAllDeviceState + 1cb

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: dxgkrnl

  Nom_image: dxgkrnl.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 5632d 261

  BUCKET_ID_FUNC_OFFSET: 1cb

  FAILURE_BUCKET_ID: 0x139_3_dxgkrnl! DXGDEVICE::DestroyAllDeviceState

  BUCKET_ID: 0x139_3_dxgkrnl! DXGDEVICE::DestroyAllDeviceState

  PRIMARY_PROBLEM_CLASS: 0x139_3_dxgkrnl! DXGDEVICE::DestroyAllDeviceState

  TARGET_TIME: 2015-12 - 28 T 17: 11:09.000Z

  OSBUILD: 10586

  OSSERVICEPACK: 0

  SERVICEPACK_NUMBER: 0

  OS_REVISION: 0

  SUITE_MASK: 272

  PRODUCT_TYPE: 1

  OSPLATFORM_TYPE: x 64

  OSNAME: Windows 10

  OSEDITION: Windows 10 WinNt TerminalServer SingleUserTS

  OS_LOCALE:

  USER_LCID: 0

  OSBUILD_TIMESTAMP: 2015-11-22 17:24:24

  BUILDDATESTAMP_STR: 151121-2308

  BUILDLAB_STR: th2_release

  BUILDOSVER_STR: 10.0.10586.17.amd64fre.th2_release.151121 - 2308

  ANALYSIS_SESSION_ELAPSED_TIME: 25 c 0

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0x139_3_dxgkrnl! dxgdevice::destroyalldevicestate

  FAILURE_ID_HASH: {070f1ec5-2412-7644-8cb9-60ac33a7233f}

  Follow-up: MachineOwner

  ---------

  I thought about it! After rolling back to the previous edition of Geforce driver the problem disappeared