Desktop PC HP Pavilion p7-1414: Ram speed question

Similar Questions

• HP Pavilion p7-1414 will not boot from the CD

  Hello

  I recently bought your desktop HP Pavilion p7 1414, I am trying to boot from a CD to reinstall Windows 8 - I put the CD to start first in the BIOS, but when I restart the computer and I have the CD, "press any key to boot from the CD" is not displayed.  It starts just directly to the computer HARD disk in Windows to connect.

  I have 64-bit Windows 8. 6 GB of RAM and a terabyte of HARD drive space.  I'm looking to reinstall Windows 8 for a new start.  Any ideas why it won't boot from the CD?

  Very happy!

  Hello:

  You must go into the BIOS and enable the legacy Mode and disable secure boot.

• Pavilion p7-1414 map video noise

  My Pavilion p7-1414 video card began to make noise of fan.  Cleaned and reinstalled.  Always noisy.  If gently, you hold the fan and prevent it from spinning noise constantly.

  Has tried to buy a replacement at Best Buy, and I was told no way.  They don't wear them.  Mine is a PNY210 with 1.0 not 2.0, which is what they have now.

  Where/what to replace this card?

  Thank you

  The card would be acceptable with your power of 300W. But - you will need to modify the UEFI BIOS to accept the new card.

  http://support.HP.com/us-en/document/c03653200

• HP Pavilion 15-E016TX - RAM Max upgrade

  Hello

  I would like to know if I can improve HP Pavilion 15 - E016TX RAM 16 GB? If so, what is the best compatible RAM?

  Thank you.

  Skand

  Hello

  This is your manual: http://h10032.www1.hp.com/ctg/Manual/c03939658.pdf

  Go through the 4 Page, 53 & 54.

  MAX RAM is up to 8GB

  There are 2 slots in your system, we already had 4Gigs

  Then add an another 4 GB in the rest,

  http://PartSurfer.HP.com/search.aspx?SearchText=691740-001

  Config of RAM required: DDR3L 1600 MHz PC3L - 12800 SODIMM SDRAM

  It is a good thing for you:
  http://www.Amazon.in/GP/AW/d/B00DJWLXA2

  https://hpshopping.in/products/online_pr_productdetails.aspx?ProductName=hp_4gb_ddr3l-1600_1.35v_sodimm

  Kind regards

• HP Pavilion 15-ab234na: Ram compatibility

  As topic says, I was wondering what it can take the RAM. I know that the vehicle currently has a 1 8 GB stick runnig at 1600 MHz C11

  The processor is an i3-5157u, I wanted to know if she can accept a 1866@C10 Module 4 x 2 or 1 x 8.

  I also know, it's a new product but, when I go to the support page and look for the manual, I don't see any specific information in the user guide.

  Also in the same page is the guide to leveling Star Wars Special etc. Which is irrelevant to this particular model as the gpu and the CPU is different. Please fix this.

  Hoping to hear from you soon.

  Update on the RAM.

  I bought a SODIMM 2 x scan 4 the other day, put them in and see how it would go.

  1 wanted to channel and good 16 GB is too much really right now.

  2. more than ram speed = better speeds iGPU.

  in any case go to the essential, it actually runs on 1866@C10 with no problems.

• sound card for a desktop hp slimline Pavilion model #: s5120y

  where can I find a sound card for a desktop hp slimline Pavilion model #: s5120y

  Why do you need a sound card?

  Computer integrated audio does not work?

• How to sync my desktop computer HP Pavilion, Acer Netbook and LG Mobile set?

  title has all the details. Help me with how to do that I have to make my life easier tech.  above are my devices

  * original title - I need to sync my desktop computer hp pavilion (Windows Vista), acer netbook and lg mobile (virgin mobile). How? *

  Your message is in the forum for people needing help with the anti-malware program from Microsoft Security Essentials (MSE).

  Thinking about ask you for help in the Windows Forum: http://answers.microsoft.com/en-us

• Accident of bios AIO desktop PC HP Pavilion a228l-20 after update

  I just bought the desktop PC HP Pavilion 20 - a228l AIO and when I update the bios and after it restarts, the white screen. only the switch button is light for a few seconds, then it shuts down.

  Whenever I turn it on, the noise of the fan and hard drive running appeared and for a few seconds, it will stop it back.

  Hope someone can help me with this question and I really appreciate it.

  Thank you

  Indeed, and I agree with you, Mr. Thanks for the kind and long Advisor. In addition, HP technical support will happen soon.

• Is RAM speed issue?

  Introduction:

  Hello, I ran some tests today to see if RAM speed really makes a difference when it comes to After Effects. In short, my conclusion is that, no, it makes no difference. At least not for the type of project I tested it with. Here are my conclusions, but first of all, my system specs.

  System Specs:

  Intel Core i7 - 3930K (4.3 GHz OC) cooled water

  120 GB Sata II SSD for the OS and programs

  256 GB Sata III SSD for the files of project and after effects of Disk Cache

  16 GB (4x4Go) Corsair Vengeance RAM (hourly stock are 1600 MHz @ 8,8,8,24)

  1 GB Nvidia GTX 460 SE

  Test project:

  The project involved 6 AVCHD videos played simultaneously and a few very basic effects such as corner pinning and cc removal of thread. The after effects memory and multiprocessing settings were as follows. 5 GB reserved for other programs, 2 CPUs reserve for other programs, 2 GB by heart.

  Results:

  1333 MHz, 12, 12, 12, 24 @ 1.57V

  Render time: 03:22

  1333 MHz, 7, 7, 7-24 @ 1.6V

  Render time: 03:17

  1866 MHz 9, 9, 9, 24, @ 1.57V

  Make the timer 03:14

  1866 MHz, 12, 12, 12, 24 @ 1.57V

  Render time: 03:19

  2133, 12, 12, 12, 24 @ 1.6V

  Render time: 03:15

  Conclusion:

  So, in my tests, I found that RAM stpeed is not really play a big role in this situation. However, after thinking about this a bit, I realized that this is probably due to the fact that my RAM must load data from and data dump to my SSD in this project. Even if my SSD is able more 500 MB/s had R/W, it is still not even remotely near speed, were one of these RAM speeds.

  So my question to you all is then as follows, can you recommend a type of project with effects that will mainly use the RAM without having to access my SSD? While my tests show a good example of 'real world' of the effects of the speed of the RAM, they do not show the full picture. With your recommendations, I'll create a new project that will best contribute to the effects of the speed of the RAM and add these conclusions about it.

  Yes... just a little space to fit... you could literally get 8 + of my tricks inside of your and still have room.

  In any case, I did a few tests more and discovered more interesting things on the search for the best speed of RAM.

  Test project

  Just a rubix cube in rotation with 6 iterations of keylight to key of all colors. The AE memory and multiprocessing settings were as follows: 5 GB reserved for other programs, 2 CPUs for other programs, 2 GB by heart. See original post for the specifications of the system. NOTE: I increased the frequency breaks through a little following GHz 4,427 during this test.

  
  

  Results:

  NOTE: Purged of the means I have "purged all" immediately before you click the record button.
  

  24 999 1553 (32.839ns total latency)

  Purged of time 1: 03:37

  Time without purge 1: 03:15

  Time without purge 2: 03:22

  24 999 1864 (27.360ns total latency)

  Purged of time 1: 03:51

  Time without purge 1: 03:03

  Time without purge 2: 03:08

  Time served 2: 03:09

  22 999 1864 (26.287ns total latency)

  Purged of time 1: 03:41

  Time without purge 1: 03:08

  Time without purge 2: 03:07

  Time without purge 3: 02:48

  Time served 2: 03:12

  2174 12 12 12 24 (27.599ns total latency)

  Purged of time 1: 03:45

  Time without purge 1: 03:20

  Time without purge 2: 03:18

  Conclusion:

  These figures all seem to be pretty conclusive that the most important part for After Effects displays must have the total latency as low as possible. So if you're in the market for RAM, get some will give you the lowest total latency, even if it means the passage with the 1600 MHz RAM on the 2400 MHz RAM. The argument according to which the higher latency will consist in transfer rate does not appear to apply here. In fact, it makes sense because a single address in RAM should contain nearly 500 MB for just a difference of 8ns in total latency. (Actual capacity of a single address is probably considerably smaller than that. I sent an email to Corsair to know what the maximum capacity. I'll post here again if they ever come back to me). So in the example above, where cpachris can run either 1600 MHz to 24 777 or to 10,11,10,30 2133 MHz, it would be MUCH better off running at 1600 MHz.

  Other important details:

  Intel says that the speed of RAM they recommend is 1600 MHz (Haswell of 1866 MHz however). I think it's because the hearts intel (at least those I did research) have a clock (bclk) standard base of 100 MHz. everything is based on this bclk. Your CPU frequency is generated by multiplying the bclk by a number. So for 4.4 GHz would multiply you a bclk to 100 MHz by 44. Pretty simple. RAM has now (I think) a multiplier locked which has the value 8. 100 MHz x 8 = 800 MHz, multiplied by 2 for Double data rate (DDR), which means, gives you 1600 MHz. If you try to set your frequency high that WITHOUT changing the bclk then you RAM may very well be running at 1600 MHz, just with worst timings.

  Now, if you were to increase the bclk for 116.625 your RAM frequency would become 116.625 x 8 x 2 = 1866. The tests I ran support this. In the original post, I had my bclk of 100 MHz (RAM max of 1600 MHz frequency). This test showed that, if I went more than 1600 MHz there is no advantage. In the next round of tests, I tested only the values min and max for those who do not give a picture complete. In the last test I boosted my bclk to 116.5 who gave me a RAM of 116.5 x 8 x 2 = 1864 MHz frequency. It is at this frequency that I gave my best results. So, if you use valued at more than 1600 MHz of RAM I encourage you to try to increase your bclk to where it corresponds to the frequency of your RAM and then run tests to see if that makes a difference. I'll go back and try to run the same tests with 1600 MHz to see where that falls to help support or defeat my argument.

  If someone objects to my statements above, please comment and let me know why so we can understand this stuff. All my findings are based only on some readings I've done and what my test results show.

  EDIT:

  I just ran some tests more and got subsequent synchronizations during execution of 1600 MHz at the time 8,8,8,24.

  1st series of tests:

  1600-888-24 (latency total 30ns)

  Duration: 03:14

  2nd series of tests:

  1600-888-24 (latency total 30ns)

  Time:05:34

  The time difference between 1600 and 1866 enforcement was minimal. It was exactly the same time for the first test and the time of 1600 in 4 seconds slower than the calendar of 1866 came. Compare the differences to run the same tests AFTER increase the bclk and this discrepancy increases to 15 + seconds. (by only comparing tests performed to the highest cpu frequency because that plays a very important role in the performance).

• Impact of the RAM speeds on site/server

  Hi and welcome to the Finland!

  I am suppose to accuire new material and I don't know what is the most effective way to go.

  I have two options at hand: the R900 and Poweredge R710/R910.

  I just wonder, how much speed RAM (not the amount but the speed) affect a server that will host a website? The site/s is / are quite heavy and at least put a toll on the side of viewers of the performance, but since the R900 supports only 667 Mhz RAM, is really worth to at least double the budget and go for R710/910 supporting 1333 Mhz RAM?

  The speed of RAM affect a server that much?

  Overall the R900 would have a total of four 2, 94Ghz quad-cores and about 100 gigabytes of RAM, 15 k HARD drive of

  The R710/R910 would have about one-third less the CPU performance and about 50 gigs of RAM, you would be 1333 Mhz.

  Think you folks?

  This is an issue involving too variable. In the past, I've seen servers with slower speed ram perform easily out of servers with faster ram, in general, it is the reverse.

  «The R710/R910 would have about one-third less the CPU performance and about 50 gigs of RAM, you 1333 Mhz.»

  CPU speed trumps ram speed usually, especially 33% difference, even taking into account the web servers are mainly intensive reading.

  Not sure how much disk space you need, but if it's a reasonable amount I would look in SSDS for extreme drive speed. If no SSD, and if you have the resources, raid 10 is fast enough.

• DV6 6c65se: hp pavilion dv6 6c65se RAM update more low-speed clock frequency

  Hi I dedided to chenage my original RAM memory to a

  Corsair CMSX8GX3M2A1600C9 NB Vengeance 8 GB (2x4gb) 1600 MHz CL9 DDR3 SO-DIMM two memory Module Kit Performance

  When I changed to RAMto a new and restart a system, I was surprised the classification System went down from 7.6 to 7.4 could someone explain to me why this happened if the old RAM was unbraned in trouble from China? Why my new performance as Corsair is defined by the hardware to work on the low clock speed, also is there nothing in the BIOS to change the clock speed of RAm etc.

  Could someone help me in this regard?

  Thank you

  Hello:

  I can't tell you why the performance of WEI memory went down, but he certainly wouldn't.

  The faster the memory will run in your computer laptop is 1333 MHz, because it is the fastest speed of the processor i7-2670QM FSB can run to, so installation PC3-12800 (1600) memory provides no advantage.

  The original memory regardless who did, should have been 1333 MHz.

  You need a PC with an Intel 7 series chipset and the 3rd generation of processor core to memory to operate at its rated 1600 MHz.

• Desktop HP Pavilion p6210y PC: RAM install problem

  My office is in the factory with the exception of the video card which is a NVIDIA Geforce GTX 750Ti graphics card.  I bought by 4 chips of RAM DDR2 PC2 6400U 800 MHZ 240 PIN by Samsung and installed according to the instructions from HP.  I also double checked my bios and updated to the latest version that has been on the HP website on 20/05/15.   When installed and rebooted my computer I first had a problem with my computer freezing completely on my and I have to make a difficult stop by disconnecting the tower.  I did a reboot and done a diagnosis (F9) and waited to see what would do the memory.  Initially, I had a 'FAIL' BIOMEM-1 error.  After a few attempts, I then is gone one chip at a time and done the same thing.  After that the first 3 installs successfully, I determined then a single chip was bad.  At this point, I restarted my system and started running it with 12g of RAM.  After about 10 minutes, my computer froze again and went to a blue screen stop.  After that restart the desired system get a dskchk is for windows.   I've looked online and made a Windows hotfix, and cured this problem but continued to get the gel and closed blue.  I then reinstalled the factory RAM chips, and it is not reappeared since.  According to all that I can see 3 of my chips are good and should run.  What other steps could be or are at - it a driver for updating bios them or not, I have to do?  Help, please!

  @sooperglew

  Only using three DIMMs will force the PC to run in single channel mode.

  Your first consideration should be Support HP or HP sales during the consideration of upgrades or replacement of memory. If you want to consider other manufacturers of the best way to avoid memory problems is to contact one of the leading manufacturers of memory. I would recommend that you try the tools of these manufacturers: Corsair, Kingston andCrucial. Once you have determined the DIMMs that you need, then contact commercial or technical support to check that you have selected the correct DIMMS. If you buy directly from manufacturers, then they will stand behind their products.

• Desktop PC HP PAVILION P6 - 2100EV Windows 7 64-bit and 4 GB of ram

  HP pavilion p6 - 2100EV is good for games?

  Hello

  Based on the following specifications, you can play light for average games with it:

  http://support.HP.com/us-en/document/c03263595#N412

  Kind regards.

• HP Pavilion p6206uk Desktop PC: HP Pavilion p6206uk desktop PC ram upgrade help?

  Hello

  I want to know how I can improve my ram to, it says on the specifications with a 32 bit OS 4 GB but it does not say how I can get with a 64 bit so if anyone could tell me that would be great.

  Hello:

  The specs say also that the maximum amount of memory you can install in each location of your PC is 2 GB, and since there are only two slots of memory, which is the maximum amount of memory, you can install your PC is 2 x 2 GB regardless of 32 or 64-bit.

  HP tends to put this notation to OS 4 GB 32-bit on the set of their specifications.

  • Dual channel memory architecture

• Pavilion g6 - 2217cl: the HP Pavilion g6 - 2217cl RAM and CPU/GPU upgrade

  Hey there, I am looking to upgrade the RAM and CPU/GPU on my G6 Pavilion. Here's my current characteristics;

  Laptop model: HP Pavilion G6 - 2217cl

  Operating system: Windows 10 family (x 64)

  Current RAM: 6 GB (used 2 slots)

  CPU/GPU: AMD A8 - 4500 APU with Radeon HD graphics card

  What are the possibilities should I upgrade?

  If more information is needed, I'll be happy to provide.

  It supports up to 8 GB of memory and the processor can be upgraded to a 10 - 4600M. Here is the Manual:

  Manual

  There is no video card to upgrade, but for the models of series AMD A video is contained in the processor itself and an upgrade of the processor also carries with it an upgrade for HD 7640 G HD 7660 G video. It's light but a bit noticeable and clock speed go from 2.8 ghz to 3.2 ghz, which is not huge but noticeable. Memory is a DDR3-1600 module, and you can replace your 2 gig with a 4 gig to spend 6 to 8.

  Memory upgrade is as easy as... CPU/APU don't upgrade not so much.

  4 GB PC3 12800 1600 MHz shared 641369-001

  http://www.Amazon.com/HP-641369-001-1600Mhz-PC3-12800-memory/DP/B008L325TW?ie=UTF8 & Keywords = 641369-001 & qid = 1465472116 & ref_ = sr_1_2 & SR = 8-2

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.