Desktop Pentium 4 dc7100 sff: dc7100 sff desktop upgrade hp pentium 4

Similar Questions

• HP Compaq Elite 8300 SFF: Block power Hp Compaq Elite 8300 SFF + graphics upgrade

  In my work asked me to provide five computers capable of video editing on Adobe Premiere PRO 5.x. What I have are available 8300's, with an i5 650 and 4 GB of ram.  I'm looking into upgrading to fulfil the task a bit better, but as an NGO, we work with a very small budget, which is why recycled desktop computers.

  What I wanted to put in a new graphics card and some more ram, however, it seems that the supplied 240W PSU don't deal with that.

  So my options are:

  Run a very low power, small footprint GPU on the original, such as power supply

  http://www.Palit.com/Palit/vgapro.php?id=2392&lang=en&PN=NEAT7200HD46-2080H&tab=SP

  or

  https://www.msi.com/graphics-card/N730K-2GD5LPOCV1.html#hero-specification

  It might also be possible to operate a full card large saving in energy and just cut a hole in the lid of the computer, although I've yet to find a good alternative.

  Another option, I'm hoping to notice is the upgrade of the PSU itself. In the partsurfer, I find that the SFF-8200 has power 320W, PARTNO 613765-001

  Although I don't care there IN the case, I need to make sure it works with the MB. It may be possible to execute it (or another more powerful PSU) as well as a better graphics card.

  Thanks for your thoughts and ideas!

  F

  The most serious problem is the limited on the slot to power. It's on the SSF 25W.

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

• Business PC HP Elite 8100 SFF: Problem upgrade memory with operating system to 64 b.

  I have a small form Factor Business PC HP Compaq 8100 Elite, with 2 GB RAM and Intel Core i5-650 3.2GHz (n ° 2 x 1 GB 240pin DDR3 SDRAM Unbuffered DIMM DDR3-1333 - hynix HMT112U6TFR8C-H9 https://www.skhynix.com/products/computing/view.jsp?info.ramKind=20 & info.serialNo = HMT112U6TFR8C & posM... ) The operating system is Windows 10 to 32 b.

  In the reference Guide of hardware for PC installation additional memory is reported:

  Additional memory installation

  The computer comes with a double speed 3 vivid dynamic synchronous memory (DDR3 - SDRAM) dual inline memory modules (DIMMS).

  DIMMs of memory on the system card holders can be filled with up to four standard DIMM in the industry.

  These media memory are filled with at least one DIMM preinstalled. To obtain the maximum memory support, you can fill out the card system with up to 16 GB of memory. DIMM DDR3-SDRAM

  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:

  • ● standard 240 pins of the industry without buffer non-DDR3-1066 MHz compatible or PC3 - 10600 DDR3 - 1333 MHzcompliant
  • Unbuffered ECC PC3-10600 DDR3-1333 MHz-compatible (Z200 SFF only) ● 1.5 volt DDR3-SDRAM DIMM DDR3-SDRAM DIMMS must also:
  • support the latency CASE 7 DDR3 1066 MHz (7-7-7 calendar) and latency CASE 9 DDR3 1333 MHz (9-9-9 calendar) ● JEDEC SPD mandatory information in addition, the computer supports:
  • front and double-sided DIMMs
  • DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not supported

  NOTE: The MFS 8100 supports 512Mbit, 1Gbit and technology memory non - ECC 2 GB.

  NOTE: The system will not work properly if you install unsupported DIMM

  I replaced the ram 2 with 4 memory 4GB PC3 - 10600 CL9 DIMM 240-PIN - Kingston KVR13N9S8 / 4 http://www.kingston.com/us/memory/search/?partid=kvr13n9s8/4.

  The BIOS recognizes correctly the installed memory (16 GB) and in the OS installed memory is 16 GB (3.49 used).

  To take full advantage of the installed memory has wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  To make full use of the installed memory wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  I also tried to install Windows 7 64B, but after loading the files to start the pc freezes

  Reinstall the original memory, 10 to 64 b windows installs without problem.

  I want to know that is not compatible with the installed memory.

  And if it is possible to avoid having to replace.

  Thank you and best regards.

  @Peppe_Valenza

  I'm not surprised by the response of Kingston.  The issue of density memory was mentioned message #2.

  Try a few other manufacturers of memory and see if you can get the own memory DIMMs.

  Thanks for posting on the forum.

• HP Slimline 260-p009 desktop: upgrade of processor in slimlime 260-p009

  Can this product http://www8.hp.com/ca/en/products/desktops/product-detail.html?oid=11955300#! tab features =

  be upgraded to an i5 processor?

  @Stefan_Thomas, welcome to the forum.

  Here is the memory upgrade information for the computer:

  TDP: 35W

  • Socket type: LGA 1151

• 8200 elite SFF Graphics upgrade

  Hello

  Everyone updated the graphic on a HP 8200 SFF? Could someone give me a tip should I get without upgrading PSU?

  Thank you

  Mattias

  Hello:

  The option for this model is the low profile card Radeon HD 6450.

  You can always find them around.

  Just make sure you get one that includes the profile low support in the editing area.

• BlackBerry smartphones can not complete calendar Sync with BB Desktop Upgrade new

  Completed the installation of BlackBerry Desktop Software Version 7.0.0.43.

  Started the software and checked the settings to sync Organizer as indicated by the software.

  Starts synchronization.

  Software began with obtaining State of the BlackBerry calendar information, then went to obtaining status of Outlook calendar information, and I think it's the reading of all records (several thousand) based on the record, but this version has them spend if fast, that I don't see the total amount before the next phase.

  Software begins to read the records, then stops at the 346 folder, and an Error Message appears:

  Sync error

  Save with the specified Id (FFFFC4DC) not found.

  Organizer synchronization does not complete and the software will Add-Ins (if synchronize all had been chosen), othwise, it stops right and displays the window summary - data organizer - complete, as if he had actually finished all the steps correctly.

  What should I do?

  Thank you.

  Well, I finally got back to normal by removing the BlackBerry Desktop Software updated and re - install version 6.1, which is available on the Web from BlackBerry site.

  I'll wait until the next review came out a month before the upgrade again.

  Thank you, JohnloveshisBB, elload and these people who have posted.

  For those who got the new version to work, good luck!

  eelkes

• Compaq EVO D510 SFF: Compaq EVO D510 SFF CPU Upgrade

  I'd like to update this pc cp and would like to know if it is compatible

  Intel Pentium 4 3.06GHz 512 KB 533 MHz SL6PG/SL6NN Socket 478 CPU processor

  Hello:

  You should be able to switch to this processor, but if you have older motherboard review, hyperthreading will be not supported in BIOS.

  Apparently there were two revisions of the motherboard used in the d510 and the other older does not support hyperthreading, and later review.

  All posts related to this topic on the forum of HP enterprise business community support have been removed.

• HP Pavilion 102la-550 desktop: upgrade help

  I got this pc last month and its great but I want to upgrade the video card and POWER supply, it came with a 730 gt and im sure that my power supply is 300 watts if I want to get a new one, this is the model

  http://www.EVGA.com/products/product.aspx?PN=100-W1-0500-KR

  I also want to adapt to an AMD RX 480

  http://www.AMD.com/en-us/products/graphics/Radeon-RX-series/Radeon-Rx-480

  I want to know if I can upgrade these components, I do not think that the graphics will fit in the case (impossible to find dimensions anywhere but its likely 8.5 inches long), but I don't mind if I need to get the DVD player to use

  link to my computer

  http://h20565.www2.HP.com/hpsc/doc/public/display?docLocale=en_US & docid = emr_na-c04867683

  BTW I lose the warranty if I open the case?

  If so im probably going to wait a few more months

  It is long 9.5 ".  Cut a 4.3 x 9.5 cardbaord model and try that. It should slide under the DVD drive. You should also disable Secure Boot. No question about the warranty.  It concerned only the original installed components.

• HP Compaq Elite 8300 SFF: RAM upgrade

  Hello!

  I tried to replace the 4 GB of RAM, upgrade to 8 GB with a pair of G.Skill. Unfortunately, it didn't turn out as planned, instead, I had a series of beeps and a black screen. RAM details below:

  old RAM: Samsung M378B5273CH0-CK0

  4GB 2Rx8 PC3-12800U-11-10-B0 1.5V

  New RAM: G.SKILL RipJaws X

  F3-12800CL9D-8GBXL

  PC3-12800 4GBx2

  CL9-9-9-24 1.5V

  The Rams are not compatible with the system or are there other factors that could have caused it?

  Claude, welcome to the forum.

  Here's Maintenance and Service Manual for the computer.  On Page 94, you will find the section of memory for the computer.  Please read it carefully.  What I've read, only seems to me that the new memory is compatible with the motherboard.  I think that the timings are incorrect.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Compaq Elite 8300 SFF: processor upgrade

  Hello-

  I was looking for some assistance or suggestions on upgrading my current image to 8 or 16 cores processor.

  Currently installed is an Intel (r) Core i5-3570 CPU @ 3.40 GHz processor. I'm pretty savvy to know how to replace a computer processor, but not savvy enough to know the right type I should use computer.

  I tried to upgrade the processor in the past on a previous machine and ended up losing the machine completely - would not start longer with new or previous processor. IN CASE OF FAILURE.

  Any ideas of a few processors compatible with my camera? Perhaps Intel or AMD.

  Thank you!

  It may be a Core Intel (r) very specific.

  See the following illustrated parts and PDF map of repair for a list of compatible processors. (see page 2)

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?sp4ts.oid=5232852&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-interactionState%3DdocId%253Demr_na-c03612803%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP ENVY h8 - 1437c: HP ENVY h8 - 1437c Desktop Upgrade graphics card

  Hello, I think the evolution of my graphics card to PNY - GeForce GTX 960 2 GB GDDR5 PCI Express 3.0 graphics card.

  My concern is the size of the map, will be the PNY - GeForce GTX 960 fit in my case?

  Here is my link PC product specifications: http://support.hp.com/lt-en/document/c03517380

  This is PNY - GeForce GTX 960 specifications link: http://www.bestbuy.com/site/pny-geforce-gtx-960-2gb-gddr5-pci-express-3-0-graphics-card-black/966900...

  Thanks in advance

  Hello

  Usually the graphics cards under 10.5 "enters Mini-Tower HP offices.  However, it is always better to open your PC and measurement.  Consult this publication of the article.

• Dc7700 SFF CPU upgrade?

  Hello.

  I've seen several questions about upgrading the processor on this machine, but I havnt seen the question. If I buy a GPU is what changes the chances to get a better processor? What is my motherboard? If Yes, what is the other upward to an Intel core 2 duo E6400 I get?

  Sorry if that was confusing.

  Thank you!

  Lsvvv, welcome to the forum.

  Lsvvv wrote:

  Hello.

  I've seen several questions about upgrading the processor on this machine, but I havnt seen the question. If I buy a GPU is what changes the chances to get a better processor? What is my motherboard? If Yes, what is the other upward to an Intel core 2 duo E6400 I get?

  Sorry if that was confusing.

  Thank you!

  No, the GPU and the CPU work separately.  The motherboard determines what CPU can be installed.  Here is the 'illustrated with parts and Service card' to the computer.  P. 2, there is a list of processors that will work in the computer.  The next step upward is an E6600, 4 MB cache, 2.4 GHz, 1066 FSB (Front Side Bus) and E6700, 4 MB cache, 2.67 GHz, 1066 MHZ front side bus.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I have a G5330 with processor E5800 want desktop upgrade

  I find that my video editing software is running slow at times and to change my G5330 HP with a new E5800 pc with new cpu 'faster '. Can't decide on i3-2120/2130 or i5-2400/2500. The difference will be worth and what cpu should I buy like my other half told me to deal with what I have.

  Garry, you understand!

  If it were me, I'd go with the i5 2500.  It's a very good processor.  The i3 Series is more than a budget CPU.  If you really want to gain performance, opt for the i7 Sandy Bridge 2600.  It will also break the Bank, however.

  If your problem is solved, please click "accept as a Solution.

• Alienware r3 gpu desktop upgrade help

  Hi there is a long time since I've posted im running a 660ti gtx right now without any questions im itching to upgrade again couldn't I put a gtx 770 rather than im still on 06 bios version and theres no support more I read I'm looking just the best map and would appreciate advice yet another card brand Bravo guys

  Hi, these are the same drivers, so just install card and if there are new drivers it will update automatically. I then installed the disk that accompanies it, in my case a card asus strix, that load all the software overclocking you'll ever need. It's really just plug and play

  At soon martyn