Similar Questions

• Printer problems due to software on my windows vista desktop problems

  They told me that I have a software problem on my windows vista desktop, because - my printer print test page, but seems to have a communication problem with some of the jobs I want to print. I can't right click and print. Someone at - he heard of this problem and might be able to give me some advice?

  Hello

  1. What is the exact error message?

  2. What is the brand and model of the printer?

  3 have there been recent changes made on the computer before the show?

  Please follow the steps below and get back to us with the results.

  Method 1: Run the Microsoft fixit and check if it helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2: R the print service spooler and verify.

  You must be logged on as administrator to perform these steps.

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Update the printer drivers and check.

  Find and install printer drivers in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  For more information, see the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• (Redirected) PC desktop problem

  My "Dell OptiPlex 745' automatically stops and then tries to start again and again but in vain. It started to happen about three weeks ago. After a week the problem, I took it to the store where I bought it. They replaced its feed to box that solved the problem for almost 1 week. Now the question is there yet. What I'm doing. Help, please. My computer is running on "Windows 7".

  Hi Muddaththir Nadhir,

  Please repost this in the forum Office help.

  http://en.community.Dell.com/support-forums/desktop/f/3514

• Display form OptiPlex GX620 desktop problem

  I have an Optiplex GX620 Desktop FF computer which was given to our Church for the office. I have recently installed 4 GB of RAM and a 80GB HDD SATA white. I have connected to a TV high definition with a PC connection.

  When I turn on the computer, two things happen:

  (1) the TV on the PC channel screen remains empty.

  (2) the computer will beep twice and 1-2-3 lights on the front is green.

  This could be a problem with the graphics/display in the computer card and what can I do to solve this problem?

  The add in video card with LFH connector can have Dual VGA. A dell cable would also a 1 and a 2 on it to indicate what monitor is 1 vs 2.

  Or remove the riser and pull out the card. Blue plastic parts are the locking tabs.

  

  

  

  

  

  Dell G9438 DMS-59/LFH-59 to Dual VGA Splitter extender cable

  http://www.txcesssurplus.com/servlet/the-10187/Dell-G9438-DMS-DSH-59-fdsh-LFH-DSH-59-to/detail

  

• Palm Desktop problem

  I can't use the area of PIMm of the sfw of Palm Desktop on your PC. I have sync very well but the launch of PC all I see the pictures on my palm. I reinstalled and the problem remains. Anyone know a solution please? Thank you.

  Thank you!! It worked perfectly.

• Handspring Visor Deluxe desktop problem

  I used a Handspring Visor with Windows XP Home Edition for the past 3 years with any problem until October of this year.  I tried to open the office program that came with the visor and it failed with the message "invalid address file" and the error message referred me to Palm Support web site.

  I downloaded the update 401 installed and original program on the computer and tried to HotSync, but she doesn't have a sync.  I have tried the following updates: USBREGClean, HS_Updater & DSTUpdater and reinstalled the original program and update (401) but always without success to get the office program to open ot HotSync.

  Any suggestions before I throw the visor away.  I want to continue to use the visor...  Have used the visor for the last 2 months, I am very worried because I can't add on the desktop.  I thought that the Windows Update has been cuaing the problem and returned to a point of restoration in September when the last HotSync worked, but again without success.

  Thanks for your help.

  Try the following steps to see if you can get Palm Desktop to open.

  With Palm closed desktop on your PC, go to computer, c drive or local drive, program files, palm or palmone, find your user folder (it will be a contraction of the name of user in palm desktop), find the address folder and rename it to address.old. Click on the Palm Desktop and see if it opens. If it doesn't, change the conduit in hotsync manager for handheld overrides desktop and sync.

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/na/visor/Deluxe/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• Upgrade memory of PC Compaq Presario SR2177CL Desktop problem

  I have a Compaq Presario SR2177CL desktop PC.  I checked the specifications of the product on the HP site and this is what it says for the record:

  Memory

   

  Attributes Installed memory 1 GB Maximum allowed 4 GB * (4 x 1 GB)
  * Actual available memory may be less

  Speed supported PC2-4200 MB/sec Type 240 pin DDR2 SDRAM

  I went to newegg and purchased:

  CORSAIR ValueSelect 2 GB (2 x 1 GB) 240-pin DDR2 SDRAM DDR2 533 (PC2 4200) Dual Channel Kit Desktop Me...

  When I put the pair of DIMMs in the pc, it won't post more.  The screen is still asleep and I never see the bios screen, I can't go in the bios configuration, or whatever it is.  As soon as I remove the pair, it works again.  The PC came with 2 512 MB DIMM in the slot 1 and 2, so I tried to delete those and replacing them with the pair I bought and got the same results.  I buy the bad memory?  I see it should work.

  Thanks in advance for any help and ideas.

  Chuck

  Finally!  I decided to try the suggested crucial.com memory, I went to the city and found in the store of the local computer.  It is plugged in and it works like a charm.  NewEgg gave me a credit on the memory of others when I called them, so everything worked.

• Magic desktop problem

  Laptop HP with Windows 7 version comes with a game called Magic desktop. A program compiled with many games. My antivirus detected a bug or a virus through this program and I have deleted or disinfect this component and now Magic desktop will not work.

  In realtion to my previous post, I think that the message I kept getting is ezRecover.exe - systemproblem. missing file

  I tried to uninstall this program, but this program seems you incorporated the program windows 7 and can not be remove d through programs - uninstall/repair.

  Please, if anyone out there knows how to uninstall Magic desktop, help me.

  Thnkx

  Hello

  Download and install Revo Uninstaller from the link below.

  http://www.revouninstaller.com/download-freeware-version.php

  Revo and see if he can find Magic Desktop. If this is the case, right click on the program icon you want to remove and choose uninstall.  This will run the uninstall program initially own applications (which will probably fail), but continue with the rest of the process.  During the process, that you may be asked to remove the registry entries, simply select all and then click on remove.  Do the same for any left over files and folders.  Once the uninstall is complete, reboot the PC.

  I hope this helps.

  Best wishes and Merry Christmas,

  DP - K

• HP Officejet 4500 desktop: problem of scan for hardware

  Hello.

  I'm having a problem with the Scanner on my device. It worked fine for years until recently. When I run a scan, the scan bar sounds like it is moved to about, as if she was facing too much friction on his way. The resulting quality of the scan is too rough. Here is an example:

  I tried to reset and even reinstalling the driver, but it seems to be a hardware problem. My device is already passed it is guaranteed and I am entirely willing to open if necessary, because I have knowledge in electronics. What can we do?

  Hi @XtheHunter,

  Welcome to the HP forums! Is a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I saw the post and understand that there are problems of scanning with the printer. I'll be more than happy to help you here.

  First of all, you have diagnosed the problem perfectly that the scan feature does not work. Great job on this point. Kudos to you. It is always a privilege to work with customers technically very. I take it as a privilege to share this platform with you. We value your relationship with HP and want to better serve you.

  First of all, it looks like a hardware problem with the printer. We will isolate the problem correctly.

  Please make some copies directly from the printer without any communication to the computer.

  Place the copy face down on the flat and press the copy button. If the copy is fine, then the question might be software related.

  If there are problems with copy, then try to copy again with a set of different cartridges to further isolate the issue. They copy very well if we could solve the problems for software related issues.

  I'll send you the steps to perform a semi full reset as a private message. Please look for the messages also. Sometimes it is useful to correct the situation.

  If it does not correctly copy, then the printer must be repaired by contacting the HP support by phone. Link: http://hp.com/contacthp

  Please try to copy from the charger bed and document scanner to further isolate the issue.

  If the problem is with the document feeder, then you can still use the scanner flat and vice versa to work around the problem.

  I will send you the links of service manuals for the printer that could be useful.

  Link 1: http://support.hp.com/us-en/product/hp-officejet-4500-all-in-one-printer-series-g510/3919445/manuals

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

• Top of page Desktop problems.

  I am such a fool.  I messed up my counter top.  I accidentally moved my Start menu and my taskbar on my desk.  My icon start used to be on the left side, now it's at the top right.  Taskbar used to be in the lower right corner, now it is on the right side of my desktop. I hope I explained this ok.   Can anyone please help me cela this mess?

  Thank you for your help.

  Right-click on the taskbar and unlock it. Take an empty place and slide it downwards. Lock the taskbar.

• Windows with DC5100 Desktop problem

  I have a HP DC5100 with Windows 7 installed, before I did the format I am using XP. The problem I have is that the computer does not restart with the restart button of Windows7 or when you install a software that needs to restart. I had no problem with xp, doing so, do not know what is the problem?. I did a bios update to 1.08. Has anyone seen this problem or any suggestions on fixing this. When I hit the button reboot stops the computer ok but hangs up on reboot, looks like the drive is rotating and the fans are running, but don't do anything?

  Thank you

  You are the very welcome.

  Sorry, it has not worked. You could try to reinstall W7 and see if you get a different result the second time around.

  Paul

• Customization of the Desktop problems

  Try to use individual photos to the photo folder to customize desktop poster all the files in all the files of Documents at the same time as the content of the folder of the image, which makes the impossible choice. See below - look down - every last file on my computer is open when I try to sort the photos for the customization of the Office!

  Hello

  It is a library that you have opened, not only the images folder.

  Look closely and you will see at the top of the photo library includes: 4 slots. This library includes your images, the images of the Public, the My Documents folder and files of Public Documents. It shows all the files in these folders.

  You must click on the link that shows '4 locations' at the top of the library.

  This will display a small window that displays the contents of the library.

  Click a folder you want to remove from the library, and then click Remove. This will remove this folder. This will not affect the deleted folder or files in this folder.

  Concerning

• Windows Desktop problem because I can not see the desktop but only Windows Explorer

  Hi everyone, I have problem with windows 7, when windows lights, showed no office, only to see the Explorer window, when you type Explorer on track, re - opens the Explorer window. do not display the taskbar, show no office. Windows 7 (please do not suggest restore windows)

  Hello

  Two things for you to do to see if they will fix it:

  Do a Safe Mode system restore to before the problem.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  ___________________________________________________

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon

• Icon on the desktop problem

  I'm trying to lock the desktop icons. I am running windows 7. I right click and continued to check and uncheck everything available. Nothing seems to work. Tried to play with the registry as suggested by many forums and which also failed. As soon as I right click Refresh it now is to annoy the * out of me. -Is this something that can actually be fixed? I literally spent almost 3 hours of work and the search for solutions. Please help if possible! Thank you

  Hello

   
  I would suggest trying the following steps and check.
  a. right click on the desktop.
  b. click view.
  c. uncheck the box for auto arrange icons.

• Acrobat - 2013 desktop problem

  I have the same problem as tanyaa2885541:

  "I Office 2013 and just download Acrobat DC hoping that it would solve this same problem I had in Acrobat Pro XI.  When I try to create a PDF file from some Word documents, I can not select them, and none of the Microsoft files present in the list of supported formats.  Also, when I go to preferences and click on convert to PDF format, none of the formats Microsoft are listed there.either.  I saw this question repeatedly on the discussion Forum, but I don't seem to have been able to find a solution to this problem.  Is there a solution to this, because it is a very important feature for me. »

  I got the test version of Acrobat Pro. If I can't solve the problem, I'll have to revert to the version of Acrobat 9 Standard.

  -J' removed the old version with the Acrobat uninstaller

  -J' restarted the PC

  -J' reinstalled Acrobat Pro DC

  -J' updated Acrobat

  -J' restarted the PC

  Nothing worked, Office documents are not recognized

  However, in the Office I peut use the function "print to PDF", without a single document by one.

  As I merge 80 + documents into a single pdf, this isn't an option.

  Can onyone please help me! @ !

  I have concluded that Acrobat DC is NOT compatible with Office in the way I need it.

  Could not believe that this does not work as it did in the past.