Desktop Windows 7 high CPU utilization

Similar Questions

• Very high CPU utilization

  Hi all

  We have several standards work of the Disqualification created to standardize the data from the source systems. Among all, there are 2 positions causing the CPU usage greater than 97% throughout the work. For the jobs of rest with the same logic, but the source systems different data do not take this as the CPU usage.

  Run these 2 high CPU utilization causing positions for 50 k records and also around 1 lakh separately but still the CPU usage remains the same. that is more than 97%. Are there other specific job setting or settings that causes this problem? For the rest, the jobs CPU usage is average only 55%. Performance wise, it is not accepted and PT test sign off is blocked because of this.

  Appreciate your suggestions! @

  Thank you

  Amol 971-505343978

  Hello

  Why do you think the high utilization of the processor is a bad thing? On the contrary, Disqualification treat this work as soon as possible. While other jobs [that run at 55%] are i/o bound and probably run a lot faster if you were to set the I/O bottleneck.

  Kind regards

  Nick

• Windows Explorer high cpu use jn 9

  Computer freezes & I have to restart my computer

  Hello

  (1) do you have made no changes before this problem?
  (2) you receive an error message then the closure of the computer?
   
  Follow the steps from the links below and check if it helps.
   
  Method 1: You can check if the Windows Task Manager also shows high CPU usage. To do this, follow the steps mentioned in the link.
  See details about your computer's performance using Task Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-details-about-your-computers-performance-using-Task-Manager

   

  Method 2: Follow the instructions in Internet Explorer 9 from the link below and check if it makes a difference.
  Use the software instead of rendering GPU rendering
  http://support.Microsoft.com/kb/2398082

   
  Method 3: Run the FIXIT from the link below, and if that helps.
  Solve Internet Explorer add-on problems when IE hangs or freezes
  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
   
  Hope this information helps.
   
   

• Windows 7 high CPU wuauserv

  I was just going about my day when I noticed abnormally high CPU usage, something has been using 12%.

  So I check my monitor of appeal and wuauserv was the problem I read it was the windows updates

  so I let it run.

  It does not stop so I restarted and then I stop but it kept rebooting and everything would not stop so I went to check updates tab

  and he was stuck on checking for updates, so I've restarted and my pc this time stop wuauserv always does the same thing but

  This time, he said no update necessary so I tried to install optional updates not important to see if it will address the problem

  but it was stuck at 0% and it's premiering in atm im do not know what to do any help would be greatly appreciated thanks.

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  Download page for hand of KB3168965

  https://TechNet.Microsoft.com/library/security/MS16-090

  Win - 7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53187

  Win - 7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53209

  Then manually install it,

  Download page for hand of KB3161608,

  https://support.Microsoft.com/en-us/KB/3161608

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

  Win-7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

• Satellite A300 DVD tray will not open and cause high CPU utilization peaks

  Hello

  I have a laptop Toshiba Satellite A300 - 1 MM and I have a problem with the optical drive (Mat * un DVD Ram Uj880as):

  DVD - RAM plateau sometimes refuse to open. The LED lights up briefly, but still nothing. Windows recognize the drive but the plateau of refuses to open. Eject commands the position of work and management of the computer-> disk management will not work. I can open the tray manually but the optical drive will not read any cd/dvd. No error code in return.

  When that happens it cause peaks of high utilization of the processor (from 60 to 100%) in the System Idle Process. Just stop and restart it solve. After that, the laptop also runs fine and the optical drive.

  I replaced Win7 32-bit with a 64-bit version and the problem persist.

  Help, please. Thank you.

  I have the same machine with Win7 32 bit and use several players. Everything works perfectly. On this virtual path, it is not easy to say what may be the problem. The configuration of your laptop is not known to us, and we don t know how you set up your operating system and additional applications are preinstalled.

  Maybe stupid advice now, but you must install recovery image original Vista that you got with the functionality of your laptop and test with the factory settings. If the same problem occurs we can chat about it.

• Product name: 500-132 a desktop: windows leaks high memory audiodg.exe 8.1

  Processor - Intel Core i7-4770 CPU @ 3.40 GHz, 16 GB Ram, peripheral graphic - AMD Radeon HD 8570

  Graphic Windows Audio insulation loses memory, no problem with the use of the CPU, but over time the memory availble died as most of the 16 GB is identified as being used by audiodg.exe in Task manager ugaining 0.3 MB per update period.

  Any suggestions on how to stop this leak. Ending the process bring back the memory usage to zero, but accumulation will continue at the same pace.

  I think that this leak causes then very slow and suspended operation / program does not.

  I'll be back the Win 8 system and the problem disappeared!

  I replaced the graphics card AMD Raedeon HD8570 as Microsoft advises that this is not compatible with Wim 10.

  Thanks for your reply.

• Cidaemon.exe causes high CPU utilization

  Original title: cidaemon.exe

  This file runs twice in the task as a process manager that causes the CPU usage to skyrocket the browser causing it to freeze any suggestions?

  Hi richardhodges,

  Refer to the article below and try the steps mentioned, check if it helps.

  Windows XP may run slowly and you may see multiple symptoms in Windows Task Manager

  http://support.Microsoft.com/kb/899869

• Windows Vista High CPU usage

  Everytime I open Windows Media Player and Internet Explorer, the CPU usage goes to 95% to 100%. Windows Media Player also responds to slow down even if it's the only program that is open.

  The problem started when I installed McAfee Internet Security and what Vaio Media settings have been configured.

  Please help how to solve this problem.

  Thank you.

  Hello

  Seems to me that you already answered your own question. Uninstall the McAfee software, the problem goes away? Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• command prompt and high cpu utilization problems

  I have an Acer Aspire laptop. Windows 7-64 bit. My CPU usage has been quite erratic for months. She sometimes becomes up to 4 or 5%, but most of the time, he is running between 50 and 100% (I have a counter on my desk). I've been running all kinds of tools and cleaning methods. I had McAfee antivirus for a prior year of minimal, but renewed problems a few months ago and found strange and annoying that he wouldn't be updated every day while I was working. I assumed something was wrong with her, so I replaced it with a program that I got for free with another purchase from Best Buy... Trend Micro, I think it was called. Well, it appeared that Trend Micro used more process and CPU than McAfee. At that time, I thought it would be safer and cleaner for Microsoft Security Essentials TM trade. I also have CCleaner installed and I run it every other day or two. I also run r-kill and tdsskiller a few times but never found something dangerous. I removed everything that I felt uncomfortable unused programs were safe to remove. The last thing that I see and which seems odd to me is that, at startup, a "command prompt" icon will appear briefly in my taskbar and then quickly go to 'start' 'recent '... I have never seen this before so it seems weird, like a clue any. Also in the last few days, usually online, but also with Solitair Windows offline. Either the cursor will freeze or the screen freezes making useless cursor, even for a moment, and sometimes I'll just "end task." I'm not a gamer, I mainly watch movies and videos... Try, anyway! Thanks in advance for the help!

  Wow you're gluten for punishment than TrendMicro Mcafee Ouch

  You did use less uninstallation of Mcafee?

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  You can get trendmicro from Mcafee here too

  http://www.SevenForums.com/system-security/151276-instructions-tools-remove-residual-anti-virus-programs.html

  Personally, I use Panda free and Premium of Malwarebytes.

• Is short boot fail reason (error 1000-0146) Office of glitter and high cpu?

  Dell inspiron 6000. Windows xp professional sp 3. Three weeks ago, my computer started loud beep on startup and sparkle of the desktop icons. The touchpad has stopped working for a while, but most of the time which is fixed. I installed malwarebytes' eliminating about four Trojan horses and tried to update all the drivers. I did a restore of the system about 3 times. When I ran a test drive, there was a failed test short boot 1000-0146 error. When my app icons start to Flash my cpu jumps to 100%. Pressing any key usually stopped for a bit. Is this a compatibility issue with my software or the failure of short boot is the cause. Help!

  Hi Nutmeg30,

  • Did you the latest changes on the computer?
  • You have security software installed on the computer?

  Learn more about the test of startup failures see link below on the Dell site and check if it helps.

  Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_300428&isLegacy=true

  It is possible that some third-party programs installed on the computer is causing the flickering and high CPU utilization issue.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• BlackBerry Smartphones battery drain with High CPU (v6.0 Bundle 3049) because of the net.rim.io.impl module

  Hello

  .

  I have improved my Torch (9800) a week ago and have been noticiing battery drain issues.  The problem is NOT persistent, but is most of the time that goes well.  I am currently on OS v6.0 bundle 3049 (v6.0.0.706, Devils 6.6.0.246).  My Wifi and Bluetooth are always TURNED off.  Only by using the Bell network, for which I have all 5 bars available.

  .

  I investigated further and found that the Blackberry system software was running with more than the processor - usually in the 1970s high, 90 same high.  And this corresponded over the hours until the battery was dead.  I have since deleted all the apps I have suspecpected - such as the Office of Nice and LinkedIn.  But the problem persists.

  .

  Battery pull was made several times, as I checked and there is no update of the OS.

  .

  Now, currently, only the Basic apps are loaded (Alt-Back): home, BBM, phone, Messages, Borwser.  All other applications are closed or exit.

  .

  Further study in the modules of the system software of BB, I found that the net_rim_io_impl, is her consuming ALL the CPU.  I don't know where/what this module does - so I'm not clear on this service within the BB I can disable (OFF) to get rid of the issue.

  .

  Please see the following screenshots, the CPU for the system a little, drops as Options use a part, otherwise it goes back 90 years, if left alone: -.

  

  And in the system software of BB: -.

  

  .

  Please help and guide, with either a fix to the module, or via a workaround solution, in which some service can be stopped or a setting can be changed to avoid this battery drain.

  .

  Thank you!

  I think it could have been resolved in a second thread.

  http://supportforums.BlackBerry.com/T5/BlackBerry-torch/pls-help-100-high-CPU-utilization-V6-0-bundl...

• High CPU and disk utilization slows down the response

  Two years, Pavilion dv7 - 2273ca running Windows 7 64-bit; Norton 360; IE8; Thunderbird; Microsoft Office 2007.  Tend to have several windows open at the same time.  For automatic updates

  Almost every day the laptop enters a period of very high CPU usage; often accompanied by high disk usage.  The response time of the laptop is compromised to the point that I often have to stop using it until activity slows.  I try to use the resource monitor, but do not know enough to say if the legitimate operations or something wrong.  Norton frequently shows svchost.exe and iexplore.exe as a heavy user of the CPU.

  Is this a normal behavior?  If not - any advice on how to identify the culprit?

  On the advice of a HP technician, I ran check disk, and then restore the system in August.  end hard drive.  System Restore did not difference in performance.

  Most of the processor have more of the base, there will be a CPU 0 and 1 for the dual core processors. Different colors are different carrots 0 and 1

  If you sort as I proposed that the highest CPU usage will float to the top, you have to watch it when your cpu pork starts to act up.

  The colors of disc are reading and writing, its hard disk is read or write data on the trays.

  A high utilization of the processor or disk can be considered normal at times, but should not go on constantly.and by dragging down the performance of the system

  Lets say you run a video in your browser, the CPU usage rises, running other programs can do the same thing.

  The disk activity can be high at times also, depends on what you do on the PC, but shouldn't be high all the time.

  http://www.TechRepublic.com/blog/window-on-Windows/learn-how-to-use-the-Windows-7-resource-monitor-for-effective-troubleshooting/3139

  http://www.PCWorld.com/article/241677/how_to_use_resource_monitor.html

• High CPU in Windows 7 between 80 to 100% usage

  * Original title: help! High utilization of the processor and corrupted files

  I have a Windows 7 computer. I had a very high cpu usage these days. When I run nothing it is between 80 and 100%. I tried to run spybot and malware bytes on normal and clean boot and nothing fixed. I ran SFC/scannow on boot and he says that some corrupt files can be fixed. I also tried a cleaning of windows security program and that did nothing no more. I know things high cpu is idle system, rndll32.exe, mcafeeshield.exe, perfmon.exe svhost.exe, one of these. I tried to follow which one in monitor resource but I could not find the culprit. The computer certainly did not raise cpu mode start minimum btw. I tried to stop some services too such that windows update is stopped and still nothing. Help, please!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• Windows 7 update - slow download, svchost high CPU usage

  I have a problem downloading by using the Windows Update application. This problem started after January 2016.  In the past, the request of update seems to work without the use of the svchost high CPU and with a reasonable download time.  There is usually a delay until the download has started, but then they ended quickly.

  I have 4 computers: 3 running Windows 7 Pro (CPU - Intel dual, i5 & i7) and 1 running Windows 7 Home (Intel i3).  If the problem is not related to the CPU hardware as best I can tell.

  My update setting is 'check for updates but let me download and install ".

  The Windows Update process includes 3 steps:
  1. identify the important and recommended updates for your computer.
  2. the selection and download updates.
  3. the creation of the restore point and of the installation, the selected updates.

  My problem is step 2, download the selected updates.  This happens on all 4 systems, and I do not expect a download to be this CPU load.  The download time is too long on all systems 4.

  My online search for answers has been frustrating, but several posts said search for viruses, malware and Trojans.  I ran Malwarebytes (free), Windows Defender, Norton Security and ESET (online) on systems and no objects are found.

  My most recent experience involved my Lenovo 7847 system (Intel dual core). Monday, May 23, I checked the updates and there were 15 updates important and 3 optional updates listed.

  After reviewing the updates, I chose the 15 updates and started the download process.  The svchost.exe that is associated with the update happened to 45-60% CPU usage, update status showed no size or % finished and the task manager - network or explore the process did not show any activity download for a long time.

  Finally, after about an hour, the update showed the download size and the % downloaded.  Svchost usage remains high during the time of whole download.  Once the download is complete, the restore point was created and updates have been installed, who also took some time (but it would be I/O CPU & Drive dependent).

  The download status has not changed during most of the time that the download process is running.  The Task Manager and process explore both show very little network activity up to that very near the end of the download procedure. There is therefore no real indication that the process is blocked or just turn very slowly.   It almost seems that the Microsoft servers are overloaded, they delay the download for some reason, or the process svchost and sub-process fail to create good handshake with the server for download.

  My Questions:

  1. Why is svchost usage so high when nothing seems to happen?
  2. Why does take an hour or more to download the updates?  These aren't the huge file sizes, and this attempt to update was almost 2 weeks after Patch Tuesday, then Microsoft servers should not be overloaded.
  3. Why is the situation unchanged for so long during the download process?
  4. most important, what can I do to change this situation?
   
  Thanks in advance for your help.

  My 'update problem' seems to have changed.  Checking updates takes a lot of CPU resources and a lot of time.

  We will leave well enough alone for now. [It took 3-4 hours for MU download/install updates of June on my Win7 boxes].

  But please bookmark this thread. If the behavior persists in July - and especially in August, respond to this thread instead of starting a new. Good luck!

• Windows Update causes high CPU AND not let me install Windows 10

  Windows 7 update has several issues:

  1 Windows Update Service causes the CPU usage high - CPU usually works 50% or more with a single SVCHOST.exe running.  I click with the right button on the SVCHOST entry in Task Manager-processes and saw all the services that SVCHOST is still running.  One at a time, I stopped and restarted them.  Finally, when I stopped the Windows Update service, the cpu immediately fell to almost nothing.  I rebooted and tested several times, and each time, it was Windows Update service that was causing the high CPU.

  2. Windows 10 Upgrade Advisor says I could upgrade to Windows 10, and get the icon Windows 10 is in the toolbar.  But it has failed to install several times.  Now, after stopping and restarting the service of updating (and I checked, it is started), the window get Windows 10 rises, is empty and goes.

  3. I ran the Update Diagnostic and got 1 error:

  Windows Update error 0 x 80070003(2016-04-04-T-04_56_09P)

  the Details of the Diag Windows Update window said:

  RootCause: RC-DataStore

  Error code: 0 x 80070003

  4. I tried to launch the 'Fixit' for update, but it did nothing.

  5. I tried to update Windows Update WindowsUpdateAgent30 - x 64 .exe Agent,

  but it fails with this message:

  "Windows Update Agent Installer has met a fatal error"

  6. when I try to start Windows Update-check for updates, it displays the dialog box "check for Updates" and activity indicator green runs and runs and runs for more than 10 minutes but nothing happens.  And when I check the view update history, it shows no updates, even though I know that I've run a LOT of updates in recent years.

  7. I thought to reinstall Windows 7.  I went to download from Microsoft, and when repair installation it activated my key it says that it wasn't a retail version, so check with the supplier (in this case HP).  I checked with HP and they said that this machine was is no longer supported.

  8. on the way I've renamed the folder C:\Windows\SoftwareDistribution-Windows SDOLD, force it to create a new (probably why it does not find the old updates).  IT did not help.

  So it seems to me this machine is expandable to 10 Windows (it meets the specifications and the Advisor to update Windows-10 said yes and installed the toolbar).  But something is wrong, probably with Windows Updater, and now nothing will be update or upgrade.  And I can't get a new copy of Windows 7.

  So, any thoughts?  I'm out of ideas.

  All I can say is to ensure that you have the latest Net framework installed manually 4.6.1
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=49982

  And the most recent client update
  https://support.Microsoft.com/en-us/KB/3138612

  Also manually install it kb3136000

  https://support.Microsoft.com/en-us/KB/3136000