Desktop won't load do not in normal mode

Similar Questions

• won't start do not in normal mode

  Computer does not start in "normal" mode.

  Make this info below; do not take into account info from SM to go in the link (this is simply a guide for you)

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Table of contents > Vista

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     Uncheck the box Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click the restart button to restart your computer.

  Mick Murphy - Microsoft partner

• Yahoo Messenger opens in safe mode and not in normal mode

  August 10, my flash has crashed when I was with google chrome, then all of a sudden, yahoo Messenger is wobbly. Then thought that yahoo needed to update Messenger, so I checked and of course, there was a newer version. I downloaded and that one point until yesterday if my computer went to sleep while I was connected to yahoo messenger or if I signed up I could not sign in and the purple area remains impossible to click anywhere or even move desktop. Could not only to return with a restart of the computer.  Now it doesn't open in safe mode and not in normal mode.

  I have been in contact with the support of Yahoo messenger and they gave me things to try as Messenger clear cache via the prompt commands, uninstall and reinstallation in Mode safe mode with networking, reset of IE9, check the connection, etc... Yesterday I did all these steps and this time I saw came error window "missing windows component, flash.ocx". I went to Flash via the Control Panel, and of course, my ActiveX went awol. Then I got using IE9.  Instant yahoo Messenger WORKS FINALLY! And I got the smiley face on the login window animation, BUT I can't use it in Mode without failure.  Login window won't be developed in Normal mode.  Is there something I have to toggle to open in Normal Mode?  I have this blue and yellow shield on it. I did the thing of Mr. fixit and there he had set for a few minutes, then she came back.  In the said detailed report something hidden icon got corrupted and something to rebuild the icon cache...
  -Using Windows 7 Home Premium 64-bit

  Hello

  1 are. what fixit you referring?

  2. do you get an error message when you run Yahoo messenger in normal mode?

  Method 1:

  Right click on the Yahoo messenger and select run as administrator.

  Method 2:

  Perform a clean boot and check if you are able to launch Yahoo messenger in normal mode.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 3:

  To rebuild the icon cache, refer to this link.

  Forum FAQ:How to rebuild the icon cache

• computer windows XP won't load does not and cannot get disk recoevery to run

  After turning on my computer comes up with the Dell logo and then turns off. I tried to start in safe mode and thus to an earlier point, but nothing happens, and the processor is very quiet, so maybe it's that. My main problem is how to get all my files and folders from the hard drive...

  Hi carelesstalk,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Start the computer using the 'Enable VGA '.
  a. see the Description of the Mode of course in Windows XP startup options
  b. in the safe mode options, select "Activate the VGA Mode" and check if the computer starts.

  Step 2: If you are able to run the computer to activate the VGA Mode, then turn off the graphics card and check if the computer starts in normal mode. To do this, try the following steps:
  a. Click Start, click Run, type devmgmt.msc, and then click ok.
  b. expand display adapters, right-click on the sub element and click on disable.
  c. start the computer and check if the computer starts.

  Note: If the computer starts in normal mode, and then uninstall the video card.

  Step 3: If nothing works, then perform the repair facility using XP disk and check the result. To do this, try the following steps:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  If the problem persists and you are using a desktop computer, we you recommend removing the hard drive and connect it to another computer and then back up your data.

  For further assistance, please contact Dell support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista works in safe mode but not in normal mode. Desktop freezes and cannot go to the Task Manager

  My laptop (Dell Inspiron; Windows Vista Home premium 32 bit) works on safe mode and safe mode with n/w mode. When I try to boot into normal mode, it comes to the screen asking my password. You can enter the password. Then, it loads the screen saver and freezes. I see a green circle turning. He never stops. I tried ctrl + alt + delete. It does not work. I did repair the system. No use. I tried the system restore. It shows a file as OS (C :) and another as recovery (x :). I chose the recovery (x :) as file control. He has worked and showed a message like system restore successfully in safe mode. But the normal mode of sill is freezing after the password screen.

  Hello

  • All changes made on your computer prior to this question?
  • You have an antivirus installed on your computer?

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer.

  Also try running a Virus scan using a live care online utility.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/Security_Essentials/

  Follow the steps mentioned in the link below

  How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Let us know if this helps

  Concerning
  Anthony.

• Some projects won't load does not, first Elements 4

  At first, my projects worked very well. I was in the middle of working on a particular project before decide me, ' Hey, we're going to upgrade the computer!

  Now, some projects simply won't load. I click on the project, and all I get is a blackened by window with the text "user interface initialization" below left. It never initializes.

  It is when I have the chance. Sometimes, all crashes with just a few "the first meeting with a serious error." It does not freeze, cause the program is able to create a backup before its closure, so I think that there is some kind of conflict. But for the life of me, I can't understand it.

  The only thing that is changed from then to now is I now version 64-bit instead of 32-bit windows. Graphics card is the same, the memory is the same, everything is the same. That's all just a new installation of windows.

  It cannot be just a general incompatibility, because some projects take very well. It's completely random those who, although they tend to be small. (a few small projects is loading)

  I had to reinstall first but who usually solves problems not create.

  Some things I've tried:

  Clear cache

  Removal of the preferences

  Relocation of

  Disable hardware acceleration

  programs to disable my anti virus (AVG and Spybot 2.0)

  Compatibility mode for Windows XP service pack 2 AND 3

  Give administrator privileges

  It is the only open application

  politely asked

  This software has been my companion software edition for years. I need to understand what got so weird since the 64-bit update.

  Specifications of the computer:

  Radeon 6670

  8 GB memory

  Windows 7 64 bit

  Processor Intel i5 3401

  ASUS Micro-ATX Motherboard

  All my drivers are up to date. Quick time is updated. Flash is up to date. The Cree program open when the draft takes over and works like a charm. So, what gives?

  Red truck inc.

  I have the first Elements 4 in Windows 7, 8 and 8.1 64bits. No problems. In the properties/Compatibility tab, I leave "run this program in compatibility mode for" unchecked. I have to right click on the first Elements 4, select run as administrator, even though I have worked for a user with the privileges of the administrator account. Then, focus on the angle of permissions a little more.

  With the thought of the possible remains of incomplete install or reinstall, you did just uninstall, ccleaner Cross (parts regular and register of vacuuming), reinstall?

  Is this video card Radeon 6670 only video card that has the computer? Are you on any network? Do you run a system single or dual monitor on your Windows 7 64 bit?

  Just some thoughts for now.

  Later.

  RTA

• Desktop not appearing is not in normal mode

  My windows Vista is running in SafeMode with networking, but in normal mode, after that I entered the password for my account, the office displays ever upward, I have just a blank (black) screen for hours. I tried to restore the system at various points in the past, but the problem remains the same. Also, until the computer has crashed, I have a blue screen for 2 seconds and then restarted the computer and the desktop never appeared in normal mode since then. Any suggestions?

  Thank you.

  Hello

  Do you have scanned for viruses in your system? If yes what virus has been detected in your system?

  Check the below registry in safe mode entry:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\shell

  Check the value data for shell. Should be EXPLORED. EXE only. If it is changed, then remove the malicious content & keep only EXPLORER. EXE.

  Hope this will help you.

• Images won't load is not in order (slideshow)

  I noticed something after my slide show. The images are not displayed in the order that they are in the XML file (and which MUST be in order).

  CODE ----------------------------------------------------------------------------

  function load_xml(): void / / first function to call in the script (unique feature)
  {
  myImages_array = [];
  Rnd var = Math.floor (Math.random () * 100000000);
  var url: String = root.loaderInfo.parameters.site_root + "services/slideshow.ashx? id = ' + root.loaderInfo.parameters.sujet_no + '& rn =' + rnd;
  var loadit:URLLoader = new URLLoader();
  loadit.addEventListener (Event.COMPLETE, completeHandler);
  loadit. Load (new URLRequest (url));
  
  function completeHandler(e:Event):void {}
  var myXML:XML = new XML (e.target.data);
  var myOptions:XMLList = myXML.options.elements ();
  var myImages:XMLList = myXML.images.elements ();
  
  transition = myOptions. (@id is 'transition');
  music = myOptions. (@id is 'music');
  Duration = myOptions. (@id is "duration");
  
  for each (var image: XML into myImages)
  {
  var loader: Loader = new Loader();
  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded); Load and add each image in the table
  loader.load (new URLRequest (root.loaderInfo.parameters.site_root + image.@["path"])); Call the function with the path of the image
  }
  }
  
  init = setInterval (init_slideshow, 2000); Creates a single time limit to ensure that the images are all loaded and added to the table
  }

  function imageLoaded(e: Event): void
  {
  Bitmap of the image: var = e.target.loader.content;
  
  If (image.width > 1920)
  {
  image.scaleY = 1920 / image.width;
  image. Width = 1920;
  }
  If (> 1080 image.height)
  {
  image.scaleX = 1080 / image.height;
  image. Height = 1080;
  }
  
  var imageData:BitmapData = image.bitmapData;
  
  var sprite: Sprite = new Sprite();
  
  sprite.graphics.beginFill (0xFFFFFF);
  sprite.graphics.drawRect (0, 0, 1920, 1080);
  sprite.graphics.endFill ();
  
  var spriteBitmap:Bitmap = new Bitmap (imageData);
  
  spriteBitmap.x = (1920 / 2)-(spriteBitmap.width / 2);
  spriteBitmap.y = (1080 / 2)-(spriteBitmap.height / 2);
  
  sprite.addChild (spriteBitmap);
  
  I havemage_total = myImages_array.push (sprite); / / they do not add in the order that they are in the XML file (I guess it depends on the size and such)
  }

  function init_slideshow(): void
  {
  clearInterval (init); Clear the interval
  load_image(myLoader,img); Start the slide show
  load_image(myLoader2,img+1); Prepares the next image
  IMG = img + 1;
  animate_slideshow(); Starts the Tween
  }

  --------------------------------------------------------------------------------------

  The problem lies in the fact Event.COMPLETE when loading images add probably images in the order that they are LOADED and not to LOAD do not. Is there a method that will make them add in the order that they are called?

  Thanks for any help!

  It is not a method in actonscript but there is a method in the loading process to keep things in sequence.  Rather than using a loop for trigger Chargers, create a functional loop where the realization of a loading image triggers the following to start loading.

  The General/generic outline of the process would be (non-literal encoding)...

  var fileArray = your xml files list

  indexCount var = 0

  function loadAFile() {}

  Loader.Load (fileArray [indexCount])

  loader.addListener (COMPLETE, incorporateFile)

  }

  function incorporateFile() {}

  treat the file loaded in place and then to see if someone else must be responsible

  indexCount += 1;

  If (indexCount<>

  loadAFile();

  }

  }

  loadAFile();  Kick things off

• LabVIEW program works in highlight mode and does not not in normal mode

  Hi all

  I want to explain my program first,

  I wrote a program where try to establish communication between Labview and the microcontroller. I am trying to select the com serial port automatically by this program. I joined VI which shows the logic that I used. LabVIEW checks each port working on the computer, writing of visa "and expected to read the '." The fi ' is recived then the loop ends here and shows the good port where the microcontroller is connected. Otherwsie, he continues to look for... each logic works I tried to check in any case, it is work, but it does highlight mode. When I try to run in normal mode, the loop is not able to properly read the microcontroller running permanently. I checked for the output baud rate, no bytes ect., tried somany ways... but it still does not work.

  I checked with all the delays, but I could not understand the problem. I don't have much expirence with Labview... Can someone please help me solve this problem?

  Thank you

  Dembélé

  I see a lot of possible race conditions in your code and no time between write 's' and read the port.

  Also follow these steps:

  

  Do this way:

  

  You may need to reverse your logic too.

  

• IdeaPad U410 works do not in Normal Mode

  Hello

  My Lenovo Ideapad U410 has suddenly stopped working in normal mode. If I need to open a link or an important document, I open it in safe mode.

  Has anyone in front of the same kind of problem? I don't want to format the system as it is first of all, I would like to know the root cause. The laptop is covered by a warranty but Ideapads isn't an international warramty I guess.

  Any help would be appreciated.

  Thank you

  Akanksha

  Unfortunately, it worked only for this instance and stop the system of frustration. Words with lenovo team... need to restore the system.

  Thanks for your help!

• DAQmx write (digital) works in mode "highlight execution", and not in normal mode

  Hello!

  I would like to create a simple vi (it will work as a Subvi watchdog in a project) to send TTL 5V 0V 3 seconds 3 seconds, by performing an iteration in a loop.

  Use a card PCI-6703 to that effect (beside that I use for the generation of analog static waveform on several stations). I also have a DAQ USB6212 card, and I have test my digital output with this USB card digital input via MAX.

  The strange thing is that when I run my code in mode "highlight execution", I get what I want: 5V 3 seconds, 3 seconds, 0V, iteration.

  When I try to start it in 'normal' mode, I only see the 5V constantly from the output through my digital entry in MAX.

  I know I'm doing something wrong, but no idea what...

  Please find attached the vi simple.

  Thanks in advance!

  Kind regards

  Your overall loop time is 3 seconds (3000 MS of waiting).  You have a 3 second delay between writing the real and write the value false.  But as soon as the false is written, the loop reminds immediately (the second set of 3 waiting operates in parallel to the writing-Delay-Write sequence) so the real gets drafted immediately after the fake.  It will be just a blip.  So that if you run in the execution of climax, the code goes pretty slowly so that you see the Boolean value False as LabVIEW takes his time data flowing drawing wires.

  Put a delay function after your DAQmx write wrong, as well.

• Computer automatically starts in safe mode and not in normal mode

  Original title:

  My system is Windows Vista, which is stuck in safe mode.  I tried several to restart in normal mode to have the computer open again in safe mode.  Need help to get out of safe mode and return to normal mode.  Thanks for any help!

  Hello

  1 you get an error message when you start the computer, which leads it in safe mode?
  2. are you aware of any changes made to the computer, before the show?
  Follow these steps and check.
  a. click on Start and then run.
  b. type msconfig in the Open box and click Enter.
  c. click on the Startup tab.
  d. uncheck the box for safe mode.
  e. click on apply and OK.
  I hope this helps.

• can connect to internet in safe mode but not in normal mode

  Hi all... I use windwos 7 ultimate...
  My problem is I can connect to the internet in safe mode, but unfortunately I can't connect to internet in normal mode...

  I have try several step to address this problem, but it seems is no good at all, and for your information guys, I format my laptop 4 times.

  and I update my network driver.

  I use kapersky 7 and malwarebytes even they cannot detect virus or trojan etc which are harmful to my laptop...

  Please help me guys

  Try this:
  -Click Start
  -Type the word msconfig in the search box and press enter
  -Uncheck the box each tick on the Startup tab.
  -Click the Services tab, then check the box hides the Microsoft services.
  -Uncheck the box each remaining tick.
  -Reboot the machine.
  -If this problem, restore the ticks in groups of 8 until you find the culprit.

  ATTENTION: If you connect to the Internet without a router, then you MUST make sure that your Windows Firewall is active. If it is inactive then you will expose the machine to the pirates.

• Some Web sites won't load do not...

  I have a 2009 27 "iMac desktop and my internet, all of a sudden, only will load and open some sites like Google, Facebook, Yahoo, Apple, etc., but will not be open to other sites like weather, Yelp, Tumblr, I could go on and on. It will just say "SAFARI CANT OPEN THE PAGE. Safari can't open the page "weather.com"because the server has suddenly dropped the connection. " Sometimes this happens when the server is busy. Wait a few minutes and then try again. »

  Well I waited 3 days and tried again many times and I am at my wits end. I have tried everything I know, but I hope that someone knows something about what I don't have. Advice, suggestions or ideas would be greatly appreciated.

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Firefox won't load is not the version of the graphic text of a website

  I see more and more pages on several site where firefox will load only the text version of the page, not the graphics. I won't be able to click a button and get a reaction. Even on support of mozilla page button to click to contains the wouldn't do anything. I had to simply press the Enter key to get it to do anything. I have reset FF default values and also load it in safe mode and the same things happening.

  the link below says "try these manual steps", but clicking on it does nothing.

  Hi soboku, ESET filtering characteristic can be adjusted to avoid problems with secure sites, either by disabling the filtering of SSL connections or by importing certificate ESET in Firefox. I don't know if you have already tried these things, but if not, you can consult the manual for your version. I looked the other day, but don't know if yours is the same: https://support.mozilla.org/questions/1006414#answer-592501