Destjet HP 3050 has j611 all-in-one series does not not on windows 8

Similar Questions

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Deskjet 3050 printer has J611 all-in-One series

  I can't seem to attach to my computer

  Hi cidlittle54,

  What is the operating system on your computer?

  How do you try to connect the printer to the computer?

  Installation of the software of the printer in Windows for a USB cable connection

  Install the software of the product for a wireless network connection

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

  HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

  Hello

  Thank you for using the HP Forums.

  You can try this alternative solution to Scan:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• HP C5280 All in one printer does not print all of the beginning of the page or end of page

  HP C5280 All in one

  Does not print all of the beginning of the page or end of page

  Hi david skelton.

  I would like that you start by checking that you have the latest drivers for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3204464&

  I hope this helps!

• Just upgraded to Windows 7 and my Dell All IN One Printer does not print. It is said that the pilot of the AIO 942 not found

  Just upgraded to Windows 7 and my Dell All IN One Printer does not print.  It is said that the pilot of the AIO 942 not found.

  Anyone where I can download this driver?

  See http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20942%20Photo%20All-In-One%20Printer&v=Dell&uid=942STD&pf=0&pi=1&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit.

  There are only drivers for Vista at http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=R151559.

  They are supposed to work if installed in compatibility mode. http://en.community.dell.com/support-forums/peripherals/f/3528/t/19319527.aspx.

• HP Officejet 6200 all-in-One series will not be printed. I get the message that the spooler is not connected.

  I have a HP Officejet series 6200 all-in-One that will not print. I received the message that the spooler is not connected how to fix this problem? Thank you. Margaretjc

  Moved from feedback

  Original title: impression of the printer

  Contact HP support.

  CrystalBall © also SEZ...

  If it's a computer with Win7 with IE10 installed, have supported HP make you that your printing software currently installed is compatible with IE10 (yet). [The chances are that it isn't.]

• HP Deskjet 3050 has e-all-in-one: impossible to download drivers and software Web site

  I have seen this problem posted a few more times, it seems that it is recurring.

  I reinstalled Win7 on my machine.  I try to reinstall the driver and software for my all in one.  I get ' HP is compile your results. " It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. ' message for more than 10 minutes now with only the busy indicator.  I tried this on Chrome and IE with the same results.  Help.  I need my scanner.

  The pilot site is always questions, but you can download the driver Windows 7 x 64 for the HP Deskjet 3050 a directly from the link here:

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

• Cannot install driver for HP DESKJET 3050 a j611 all-in-one using windows 7

  Stagnate in the printer, but can not find a driver. Have tried to set as the default printer, but right click I only get CREATE-HELP-DELETE SHORTCUT-PROPERTIES of the DEVICE can someone help as HP are useless

  You don't install it correctly, but just pluged in there.

  It must have taken all of 10 seconds to locate your model on the site of HP

  You install using the cd of HP, or the full functionality of the HP site download and does not connect until the installation says to

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=5061092

• Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

  Until that number today printing problems.

  Now can't print from Word or any text file.

  All other OK.

  Uninstalled and reinstalled SW.

  Problem remains.

  Word files and text printed in WHITE.

  All others are OK.

  Hey @Clark_Stillman,

  I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Load plain white paper in the input tray.
  2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
  3. Press arrow right () and select Tools, and then tap OK.
  4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

  

  • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
  • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

• HP OfficeJet 8500 Wireless all-in-One ADF does not work

  The ADF on my all-in-One of 8500 Wireless printer has stopped working.  CB023A product number.  I went through all the troubleshooting steps and I reset the printer and the ADF will not feed.  It was working fine earlier, but that are becoming more and more spiratic and now don't feed pages in all.  All CAD looks like it is in good condition.

  There is a document with measures helping address ADF no power problem. This document can be found here.

  Also, be sure to perform a hard reset, although you mentioned try a reset, if you have not already:
  * Unplug the printer while the unit is running
  Disconnect the other end of the power cord from the wall jack directly
  * Wait 30 seconds
  * Plug the rear unit to

  For example, if the problem persists, I would then perform a partial reset:
  * Partial reset for this printer is the same as the top of the page group of printers in the document located here.

  Do you mean the turning rollers as the printer attempts to feed paper through the ADF?

• C4280 printer all-in-one: C4280 does not print

  Hi all

  I got this C4280 at a yard sale.  They said it worked, but he has not been connected over the years.  Without installing it, I tried to copy and it goes through the motions, sounds good, but nothing appears on the page.  I tried wiping and cook with the vapor cartridges.  It feels like the black, it is empty but there is no ink to color one.  Some came out when I steamed it.

  I installed the software and tried to clean without success.  I actually had a very light something out of the black cartridge but nothing about the color of one at all.  Ink levels show black as '? (probably empty) and color as most half full.  I would like to get something at least, no color?

  I have a few cartridges no HP on order, appear in the coming days. Can someone suggest that I try to copy, or give me some indication that this might actually work when installing the cartridges?

  Thank you!

  Hi @26kick.

  Welcome to the Forums of HP's Support. I understand that you have a problem getting to your printer. I would like to help.

  Lack of use could have damaged printheads. This could be the cause of the problem. Fortunately, the print head is integrated in the ink cartridges. Replacement of ink should solve the problem.

  You can also try to go through this document. Series of HP Photosmart C4200 all-in-one - output printed lines or scratches

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Deskjet F4280 all-in-one scan does not work. Start button / stop flashing when you press scan.

  Scan does not not on my HP Deskjet F4280 all-in-One.  The power button flashes when you press scan. Everything else works.  I tried to unplug it from the wall socket and reconnect it.  Not solve the problem. What else can I try?  Or, is it a piece of junk now and needs replacement?   My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.

  Hi woodcarver60,

  Follow the steps outlined in the documents below to scan from the software.

  HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921

  HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857

  HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146

  Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers

  HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019

  Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers

  HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647

  HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350

  All-in-one printers

  Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

  Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

  Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

  Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

  Multifunction LaserJet printers

  Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

  Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

  Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

  Win XP: c03584350 http://support.hp.com/us-en/document/c03584350