Details of the inventory AP 1000

Similar Questions

• OME does not receive details of the inventory and the State for some devices

  OME does not receive the details of the inventory and the State for some servers.

  For example when looking at one of our PowerEdge R620s is all that presents itself:

  

  iDRAC firmware and LCC is updated (version 2.21.21.21 is installed.)

  I reset the iDRAC, and that did not help.  I have no problem with most of the other R620s in the same range of discovery.

  I deleted the object to OME and re-discovered twice over the past week it but did not help.

  Things seem ok when I use the troubleshooting tool:

  

  Anyone has any info on what may be going on here or how to fix this?

  Thank you

  Hello

  Thanks for the details in the post.

  Wanted to check what version of OME use you - OME 2.1?

  If so, this behavior with ws - man discovery could potentially due to expiry of certificate on this device. You can launch the iDRAC user interface and confirm the certificate information.

  2.1 the OME, the WS - Man communication component is updated. The most recent component does not communicate with the device if that device has been exceeded in the certificate.

  Sslresetcfg running via racadm will reset the certificate. For details and solution, see same threadhttp://en.community.dell.com/techcenter/systems-management/f/4494/t/19653767 .

  Let us know if that helps.

  Thank you
  Vijay

• Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7 - KERNELBASE.dll exception 0xe0434352

  Hello

  Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7.  I use the window of the object but the detail of the objects window arrives and immediately SQL Server stops with the error below and then opens again.  I didn't find any help with this specific error is but suspect there is a problem between SLQ Server 2012 et.NET Framework 4.  Unfortunately, I do not know what it takes in this regard.

  Thanks, Deb

  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Deb - HP
  Description:
  Name of the failing application: Ssms.exe, version: 2011.110.3000.0, time stamp: 0x5081c1cd
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83c8a
  Exception code: 0xe0434352
  Offset: 0x0000c41f
  ID of the process failed: 0x13a8
  Start time of application vulnerabilities: 0x01ce609a6d3db991
  The failing application path: C:\tempSQLWOW\110\Tools\Binn\ManagementStudio\Ssms.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 1fb1cbfb-cc8e-11e2-b436-abd2bebb3f17

  Hi Claude,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Good day!

  Answer please if you face concerns.

• Failure of the load of the inventory... OPatch failed to load the inventory for the Home.OPatch Oracle data failed with the error code = 73

  Hello

  I will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsinventory % ORACLE_HOME%/OPatch/opatch.

  It ended to give details below.

  Citing O 11.2 patch .0.1.1

  OPatch could not create/open history for writing file: * my home oracle path***\cfgtoollogs\opatch\opatch_history.txt

  **ORACLE_HOME***\cfgtoollogs\opatch\opatch_history.txt (access is denied)

  Setup Oracle interim Patch version 11.2.0.1.1

  Copyright (c) 2009, Oracle Corporation.  All rights reserved.

  OPatch could open the log file, the recording is not possible

  Home Oracle: *.

  Inventory Center: C:\Program Files\Oracle\Inventory

  from: n/a

  OPatch version: 11.2.0.1.1

  YES version: 11.2.0.2.0

  YES location: * ORACLE_HOME * \oui

  Location of the log file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log

  History of patch file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.

  LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 -.

  09_16-27 - 49 PM .txt

  OPatch failed with error code = 73

  Can someone please help me solve this problem?

  Do I need to install the last opatch utility?

  Hello

  This error message " LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 - .

  09_16-27 - 49 PM .txt "

  indicates that you have a permission problem with your file systems: cfgtoollogs/ORACLE_HOME/opatch

  Check the owner of this file system.

  Kind regards

• The inventory service could not start

  Hello

  We have improved vCenter Servcer 5.x to 6.0, which worked very well.

  As we put it at level ESXi also we close vCenter [a Vm] and brought back, our single sign on Windows domain was also corrupted.

  Now the field is back and vCenter VM, however vCenter Server Service does not essentially depends on Service of the inventory that fails to start.

  On the web console, I get the error "503 Service unavailable (unable to connect to the endpoint: [class Vmacore::Http:NamedPipeServiceSpec:0000000001D6D190] = _serverNamespace / _isRedirect = false _pipeName = \\.\pipe\vmware-vpxd-webserver-pipe).

  All discussions I found see SSO re-registration due to changes in the AD, but they use 5.5 x command that I couldn't find in 6.0.

  There is no SINGLE authentication service in 6.0 too and location of the log files is changed.

  What is the location of the new log file associated with the service of inventory and how to fix this SSO with service Invertory question.

  Thank you

  Hello

  If your vCenter server is on windows, then the inventory service log location is C:\ProgramData\VMware\vCenterServer\logs\invsvc.

  You can check vpxd or vsphere_client_virgo.log for details of the failure. You can share the beam of support for more details?

  Concerning

• STUDY ON THE INVENTORY MODULE

  I would like to learn more about the inventory module. Please help me what are all of the things to learn and to learn. If possible provide me with a few Web links.
  
  Thanks in advance.
  
  Kind regards
  
  Uvaraja

  Hi Varaja,

  Again, you can check this link for more details.

  http://docs.Oracle.com/CD/A97501_01/Acrobat/115invug.PDF
  http://docs.Oracle.com/CD/B34956_01/current/HTML/docset.html
  http://docs.Oracle.com/CD/A85683_01/Acrobat/invtrm.PDF

  Kind regards
  Bernadette

• details on the subinventory and purchases information table

  Hi all
  
  
  I have this requirement to withdraw a report of all the spare parts and other items in stock organization, that are active, ERP with details of recent purchases. If the purchase information are not available, the provider name field should be empty. also to provide the unit of MEASURE, inventory org and under inventory information too against each item.
  
  I tried the following query of the responsibility of super user INV abc

  select DESCRIPTION,segment1,segment2,segment3,PRIMARY_UOM_CODE,PRIMARY_UNIT_OF_MEASURE ,
  organization_id
  from mtl_system_items where 
  rowid IN 
  (
  select rowid from 
  (
  select rowid, row_number() over (partition by SEGMENT1 order by null) rn from mtl_system_items
  where  INVENTORY_ITEM_STATUS_CODE ='Active'
  
  and    organization_id  IN (105,121)
  ) 
  where rn = 1
  )

  kindly guide me to include information subinventory, when the master item form is opened in tools there is point Subinventory, I'm not
  able to get the name of the table that is associated with subinventory, so point I could include in my query
  also how can I get the information of public procurement
  
  kindly Guide
  
  thanking in advance

  could please guide as to the info column a be extracted in the query for the details of the purchases of the po_lines_all table

  Depends on what details you need. You can get the price of po_lines_all

  What wud column also show subinventory information

  Use secondary_inventory

  is it possible to display these items too who do not subinventry, the markets, the seller Info

  You must use outer joins (please google the term and go through a few examples)
  Try the following

  SELECT DISTINCT msi.description, msi.segment1, msi.segment2, msi.segment3, msi.primary_uom_code,misalv.SECONDARY_INVENTORY,misalv.source_subinventory,
  pov.vendor_name,
                 msi.primary_unit_of_measure, msi.organization_id
            FROM mtl_system_items msi,MTL_ITEM_SUB_INVENTORIES_ALL_V misalv, po_lines_all pla,po_headers_all pha,po_vendors pov
           WHERE msi.inventory_item_id=misalv.inventory_item_id(+) and
             msi.inventory_item_id= pla.item_id(+) and
             pla.po_header_id=pha.po_header_id(+) and
             pha.vendor_id=pov.vendor_id(+) and
              msi.organization_id=misalv.organization_id(+) and
             inventory_item_status_code = 'Active'
             AND msi.organization_id IN (105, 121)
  

  Hope this helps,
  Sandeep Gandhi

• Cannot see the details of the certificate when you try to display more information about the certificate. Need a fix as soon as possible!

  When you click on the padlock to the left of the URL > right arrow > and then click more information > to view details about the certificate Details page > view certificate, I see nothing and nothing shows me the certificate. I need this job to be able to view Details of the certificate and encryption information pages

  Hmm, you are using the all-in - One Sidebar extension? It has a compatibility issue with the Page Info dialog box in Firefox 42. See: FF42 - view Page Info - media tab is missing.

• My emails now have a lot of details in the box of the address such as references, how to get rid of this message with ID

  I've had various problems with Thunderbird for 24 hours. I have finally found my missing files, but when I send and receive emails, there is a lot of stuff printed in the box of the address that seems to be all digits of the identification details, in response, the details of the message, for the most part. What is - this and how it can be removed?

  In the menu, see. Headers | Normal

  No menu? Press on and hold the < alt > button on your keyboard, press v.

• Need satellite S50-B-15F - Details of the 256 GB SSD

  Hi all

  Can someone tell me what is the brand and model of the SSD 256 GB drive in the Satellite S50-B-15F laptop Toshiba comes with that? Product information is very good except the SSD which is a shame...

  I know that the SSD itself will be definitely better than a HARD drive, but I still want to know what Toshiba puts in this model. Is this model SSD 3 GB or 6 GB?

  What brand is the SSD: Toshiba Q or something else?
  I own a couple of SSD in my PC which is great, but I would like to know what I'm buying.

  Thank you

  AFAIK the S50-B-15F Satellite was equipped with a M-SATA SSD 256 GB drive.
  The laptop was equipped with chipset Mobile Intel HM86 and this chipset supports 4 ports SATA 6Gbit performance.

  Unfortunately I have found more information about the mSATA SSD, but I guess that if the chipset is compatible 6Gbit, the SSD drive should be able to support that speed too.

  However, if you find more details on the SSD, feedback would be appreciated

• Tecra 550CDT, Details of the BIOS

  Hello

  I'm trying to figure out if my Tecra 550CDT will support the upgrade of my hard drive with 20 GB (from the current 4 GB).

  However, the details about the BIOS of TOSHIBA are very rare on the support site - all I have to go on is my manual and Readme files that update the bios acommpany. It is not particularly useful.

  I have of course updated to the latest version (8.0 years mid-2000), but I would like to know what it takes in charge before I buy.

  Anyone know where I could find info on this BIOS or a way to say if it supports the upgrade?

  Thanks in advance.

  Hello

  my friend has a Tecra 550CDT. He upgraded his up to 30 GB HARD drive.
  But this update was made by a company in our city.
  Works without problem. He told me they did only an update of the Bios.

  Bye!

• What are the details of the 3-year warranty on Tecra?

  What are the details of the 3-year warranty for computer Tecra laptop w/r bad pixels? Toshiba gives no kind of guarantee of "zero pixel wrong" even for a limited period?

  Hello

  As in the previous mentioned announcement, there must be a certain number of dead pixels on the display in place of the screen.
  It s no matter if it s a s one or three years warranty.

  As far as I know during the guarantee period Toshiba will replace your screen if the number of defective pixels is greater at:
  -10 bad pixels to screen VGA (640 x 480)
  -15 bad pixels to screen SVGA (800 x 600)
  -20 defective pixels for screen XGA (1024 x 768)

  I found some useful documents FAQ on the Toshiba site.
  Please read these documents for yourself:

  I have one or more bad pixels on my screen, I can fix it?
  http://support.toshiba-tro.de/KB0/FAQ350079001NR01.htm

  What is the maximum number allowed and the type of fault of pixel your monitor LCD Toshiba can expose by 1 million pixels?
  http://support.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• The GPIB-ENET/1000 commands reference

  Hello

  I want to control via Ethernet GPIB instruments using my own software

  FOM a Linux machine.  Do not intend to use MAX and/or any other software/drivers of OR.

  I need to be able to speak for the GPIB-ENET/1000 C commands like:

  socket = socket (AF_INET, SOCK_STREAM, IPPROTO_TCP);

  Connect (socket,...);
  Send (socket, "something",...);
  recv (socket, where_to,...);

  Is this something that can be done?

  Is there a reference of document summarizing GPIB-ENET/1000 orders

  What should I use to communicate with GPIB instruments?

  Thank you!

  Hello

  You will need a driver OR to communicate with a hardware OR. The driver you need is NEITHER 488.2 and can be found here for Linux:

  http://www.NI.com/download/NI-488.2---Linux-15.1.1/5926/en/

  This comes with a C API, so you can use any programming C environment you want.

• Where to find the details of the Bios Update

  Hello

  I just updated my HP Envy/Win Bios 4.3 8.1.

  I would like to find a wepage where can I find details about the changes in each version of the Bios, a Web page that I can also use later for details of future Bios.

  Thank you.

  Hello

  I found the details of updating the current BIOS (F.43) under the software & drivers section for the TouchSmart from HP Envy m7-J010DX. There is no record of previous changes to the BIOS version.

  The information of the laptop is fn + esc and the label under the battery.

  Product name: HP Envy TouchSmart (TS) (fn + esc)

  Product name: m7-J010DX (label under the battery)

  Product model: E0K83UAR #ABA (fn + esc and the label under the battery)

  Product E0K83UA number accepts without the R #ABA part and form most suitable for this model number, however the E0K83UA lists a 1600 x 900 HD display, and the E0K83UAR #ABA has a full HD (FHD) 1900 x 1080 screen.

  Speculation: it is a refurbished model we HP, and it may be that the R indicates that it in the model number. The #ABA can be a qualifier of renovation indicating the State of the appearance of the machine after renovation, #AAA being the best.

  Thank you.