Detect the bump online Laser

Similar Questions

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• How to detect multiple points of laser on the image

  Consider I have a picture with several spots dark bright laser. I want to find the center of gravity of each laser spot and return the coordinates of each spot.

  Currently, I managed to detect an single spot to grab an image, adjustment of the threshold (threshold IMAQ) and find the center of gravity (centroid IMAQ).

  However, when I have several points of light, this method gives me the center of gravity of all tasks combined. Should what technique I use to detect the center of gravity of each individual laser?

  Thanks in advance.

  Try to use blob analysis.  Make a fast threshold, which should give you a place for each laser.  Blob analysis allows to get the center of each BLOB.  Use the function of Center of gravity to locate the exact gravity Center, if the center of the BLOB is not good enough.

  You should be able to save time by recording the previous values of the center of gravity.  Lasers are moving very quickly, their new locations should be near their old location.

  If it is still too slow, understand what part takes the most time.  If it's the center of gravity, I am able to suggest other ideas.

  Bruce

• Detect the PEAK, mount and average

  I use a loop in LabVIEW 8.5 to capture the signals emitted continuously by a card, peak detector.VI is used to detect the signal peaks, then fit.VI nonlinear curve is used to climb the summits, signal now capture, detection of peaks, mount and display pics are all works very well permanently, but there are still some problems annoying me.
  1. the received signals is not very stable, so editing results expected on average for 100 times, then how can I averaged the results of fitting on the condition that the capture of signal is not interrupted, this is the time loop does not stop, when the average is made this time, average is reset for the next 100 fitting results can be average again?
  2. There is another way, that's 100 results of fitting is automatically saved to excel, then the results is an average manually in excel, then how to store results like this: the first 100 results of connection are stored in an excel file and the next 100 results for other excel connector or they are stored in an excell , but in different columns? Of course the thses are subject to the capture of signal is not interrupted.
  3. There is a threshold for the detector.VI peak, but the captured signals entry isn't very stable, so the number of peaks detected is not the same every time, like this time, the number of vertices is 40, next will be 39, this will affect the results of fitting slightly, then how do to detect the same number of vertices every time such as the number is 40 each time?

  Any advice will be appreciated!

  Maybe the pic attached detect.vi 'test' can help you. "medium signal.vi" is a sub VI on average the signal in a way online.

  There are three methods using the input signal:

  1. no average.

  2. average exponential.

  3. linear average.

  Your problem is when the input signal is damaged by some noise, and you want the input signal before the detection of peaks on average. I use white noise to simulate a noisy environment.

  By default, the average mode is 'Linear', and the number of averages is 50. The more averages, the best on the result, but more time to update.

  Swith mode between 'Linear' and 'No way' to compare the difference before average and average.

  Average exponential is not appropriate in your case.

  Let me know if it works for you.

• DeskJet 3745 cannot detect the paper in the tray

  I recently bought a HP DeskJet 3745 at a yard sale. No problem installing on my Windows 7 desktop.

  However, when I try to print to the printer will not do. He says he's paper (even if there is paper in the tray).

  My guess is that something is wrong with the paper sensor (or switch). I could clean up if I knew what I was looking for, but I don't see anything that could be the sensor of paper. I tried to search the description of the part online and found a site selling a "branch ADF" that meets the description of the probe, but it doesn't have a picture.

  Suggestions for what is the sensor or how to solve this problem would be greatly appreciated. I'm not afraid to have to disassemble the printer, if necessary.

  Okay, I found the problem. After that several futile attempts to print, the paper that was in the tray has a black slick spot used a roller running on top of it. The roller needed cleaning. It's the only roll that lies under the main mechanism and it is difficult to go to the. Once I cleaned it, the printer works fine.

  There is no paper sensor, the roller pulls just the paper in ink jet Assembly, which has a trigger switch. The only switch is used to detect paper jams, but also lack of paper in the tray (assuming that the roll is clean).

• CD/DVD drive is not detected, the disc is missing or disconnected

  Well I have not tried to play anything or anything either burning on my laptop in a while and all of a sudden is not working more I followed suggestions on the microsoft site, but when I went into Device Manager to check on my drive anywhere it lists same CD-ROM/dvd-rom I'm so confused, I don't know what I tried to use microsoft not fixed and it's just as stuck as I am all he tells me it is than its disconnected or missing and cannot be found.

  Oh and while I'm asking questions my sound stopped working a few months back the small volume in the lower right corner icon has an 'x' next to him now and he says: no audio output device is installed, I tried following the suggestions online for this with no luck either. I hope that its not anything internal since I just had the motherboard replaced by a few months before this happened

  Thank you very much I hope you can help!

  Hello

  Well it still might be hardware or wiring.

  Restart to make sure that nothing is inteferring with the process.

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• [Issue] Sourcefire/Firesight Syslog to include the result online

  Hi guys,.

  I have set up an alert to syslog on Firesight Virtual Center of defence, but I can't get the result online for events.

  Here is an example of event raw that I received

  April 14 01:09:20 XXX XXXX: [primary detection engine (a9d9147e-dd96-11e2-a935-a6cb913df812)] [XXXX] [1:34463:2] 'Attempt to outgoing connection of the TeamViewer APP-DETECT remote administration tool' [Classification: potential Violation of company policy] user: unknown, Application: TeamViewer, Client: Internet Explorer, Protocol App: HTTPInterface infiltration: s1p2, output interface: s1p1, entry Security Zone: external, out of Security Zone: internal, [priority: 1] {TCP} x.x.x.x:51355 -> x.x.x.x:80

  Here we could see the snort ID, source, destination, port, but not the result of inline (if it is abandoned or not)

  Y at - it anyway to change and include these result inline using syslog.

  Thank you

  Hello

  Yes you are right to change gravity and priority will not make changes.

  Check: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCux57517/?reffering_site...

  Apparently in 5.4 and 6.0 according to the user guide thus only under the settings will be seen in syslog:

  -date and time of the alert generation

  -event message

  -event data

  -ID of the triggering event for the generator

  -Snort event trigger ID

  -review

  Kind regards

  Aastha Bhardwaj

  Rate if this is useful!

• My computer does not detect the second monitor

  I just bought another monitor for my PC. My first monitor is plugged into one of the two VGA connectors at the back of the computer, and my second monitor is plugged into the second slot VGA. However, when I try to detect the second monitor does not work, and he thinks that a monitor is connected. Thanks for any help!

  Hello

  Power Off the Computer and then plug in the monitor.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Tutorial: How to set up two monitors (Windows) - video
  http://www.YouTube.com/watch?v=YFCpaAs5s3c

  How to set up multiple monitors
  http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.html

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I use the internet online - all written or missing words in my LCD

  Original title: Please help me

  I had a problem with my computer... When I use the internet online... all written or missing words in my lcd screen... I already check that the computer with the antivirus software, but has not detected a virus in the computer... what should I do?

  Windows 7 ultimate 64-bit

  Hello

  1. What is the brand and model of the computer?

  2. what anti-virus software have you tried checking the virus?

  3 have there been any changes made on the computer before the show?

  4. where exactly you are missing words?

  Even if you have used a virus protection software, try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem is not resolved, please provide more information to help you best.

  I suggest also refer to the link and post a screenshot:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• How can I uninstall Sierra &amp; return to El Capitan without an external hard drive or equivalent required by the instructions online?

  How can I uninstall Sierra & return to El Capitan without an external hard drive or equivalent required by the instructions online? I find too many misadventures and not happy.

  Hello

  Check out this useful tutorial: https://www.igeeksblog.com/how-to-downgrade-macos-sierra-to-mac-os-x-el-capitan/

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• How to stop hundreds of pages that prevent me from using my connection to the Bank online?

  I tried to uninstall and reinstall Mozilla Firefox, but it does not help. The problem does not exist if I don't use the method online access to my Bank.

  You get tabs for opening constantly if you select the Firefox program to manage a file when you get an 'Open with' dialog box.

  • https://support.Mozilla.org/KB/Firefox+keeps+opening+many+tabs+or+Windows

  Rename or delete the mimeTypes.rdf file in the Firefox profile folder to reset all the actions file.

  • http://KB.mozillazine.org/mimetypes.RDF
  • http://KB.mozillazine.org/File_types_and_download_actions#Resetting_download_actions

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• Why, after all these years, can not Thunderbird automatically detect the character encoding

  Judging by all existing messages and complaints on this issue, not to mention the erroneous messages that say that the problem is resolved when it is not, I must conclude Mozilla either does not believe it is a problem or doesn't care to fix it. The key is that there is no way to tell Thunderbird to automatically display the emails in the character encoding format that they were written in. I could understand the case where headers are not properly filled, but I see tons of emails in which coding is clearly in the headers in the message source. You can force, but if you do the menu VIEW-> encoding-> UTF8 character (for example) it doesn't 'glue' If you post another message. But who wants him 'stick' at all times even when? What the average user really wants is to be able to toggle the VIEW-> character encoding-> auto detect the default 'off' value simply "on" and don't have to bother with it more.

  This is a problem that seems to go on forever, and it NEVER happens with other e-mail clients. If there is some backdoor way to actually autodetect working, I would know about it. But more importantly, I think that all users would appreciate it if this was not some secret arrangement 'backdoor', but a choice of menus overall simple for all accounts. Can Mozilla if you please fix this problem once and for all?

  Can you tell us what you heard:
  Tools > Options > advanced > general tab
  Click on Config Editor

  At the top of the search page of type:
  Mailnews.force_charset_override; Value = "false".

  Do you like value... true or false?
  If Value = 'True', double click on the line to switch to "false".

  close window - top right X
  Click OK to save the changes to the Options.
  Close and reopen Thunderbird.