Detection of change DAQmx - cancel the event error logging

Similar Questions

• How to solve problems using the event viewr log?

  Hello guys,.

  Can someone tell me how to use the event viewr log and resolve the problems or errors?

  I can solve the problems by myself, but do not know as the use of the display of event logs and information.

  Kind regards

  Claude of RAM

  Notes on the use of Event Viewer:
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Multiple connections WebDav - error 1055: cancel the event recording

  Hello

  I use WebDav to extract the files from the controller to the computer.

  It does not work when I use only one connection.

  When I use the same WebDav vi several times to extract the files in different folders, I get error 1055: unregister events.

  

  The first vi continues to operate, but the other stops.

  The vi is attached in the following snippet:

  In order to run it, the joint screws are also necessary ('FileInfo name and Path.vi' and "State.ctl of WebDAV sync").

  

  The second vi I want to run at the same time is exactly the same, but with different name of queue and different data records:

  

  If I delete the function "Cancel registration for events" on the side right, then I get no error, but the second vi stops without explicitly stop the while loop.

  What could be wrong?

  Thank you.

  The problem seems to be related to the use of an event inside a timed loop structure.

  Call loops are designed to be run in certain time intervals, while program alsways waits on the structure of the event inside the loop until an event occurs. These two behaviors are strictly opposed to each other, which could cause problems in this particular case.

  Replace call loops with while loops, seems to solve the problem

  Andreas Jost

  Technical sales engineer

  National Instruments

• Detection of changing DAQmx online PFI (unbuffered)?

  Hello!

  I'm developing a detection of change on a line of digital input to a software event trigger.  I use the PCIe 6321 DAQ board.

  It works well with an IO line buffered (i.e. any line of port0, see extract of code). However, as I need the lines buffered for other tasks, I would use one of the lines, PFI (port 1 or 2).

  Now, if I use for instance port1/line2, I get error-201062: "selected lines do not support buffering operations. Ensure that lines are supported buffering operations are used in the task. If you use the calendar to change detection, the task should be replaced by without buffer to support these lines. »

  So, is there a way to make the detection of change on a line without buffer?

  I have searched the web for help and resources, but did not find anything useful.

  I would be happy to advice or suggestions.

  Best regards

  Sebastian

  

  No, only non - PFI port 0 lines will support the detection of changes in hardware.  Otherwise, you're stuck with the search on ports software 1 or 2, with a limited time resolution and no guarantee to catch all the changes.

  -Kevin P

• Cannot cancel the message error "there no disc in the drive, etc.

  When starting today I received the error message "there is no disk in the drive. Insert a disk in the Drive\Device\harddisk\DR1. »

  I read the advice from Microsoft about stopping thie message re-product online, but I can't cancel the message no matter how many times I click Cancel, close, etc.  If I can get rid of the message, I might be able to sort the problem!  Can anyone offer some advice please!

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Kim,

  I tried to put a disc in the drive, Zip and Eureka! the message has disappeared :)  Now, I'll try and follow the rest of the tips in the link you sent me.  Thank you.

  Rolfe2

• Detect a change anywhere in the form after the opening

  Is it possible to script to detect whether a shift since the form was opened? For example, if one of the objects text now has no text or different text or a checkbox is now disabled or a drop-down list selection changed?

  Hi Don,

  Don't know if it of the forum or not, but you need a double is equal to.

  if(Event.Target.Dirty == true) {}

  or, just leave him == true off

  {if (Event.Target.Dirty)}

  Bruce

• How to remove the event errors in Event Viewer

  How can I remove error event in the Windows Event Viewer 7

  Save this batch on your desktop file, it removes the windows event errors 7. Open Notepad, and then paste this below in and save it as clearevent.bat

  off @echo
  FOR /F "tokens = 1, 2 *" %%d IN ('bcdedit'), DO DEFINE adminTest = %% V
  IF (%adminTest%) == (Access) goto noAdmin
  for /F "tokens = *" % in ('wevtutil.exe el') DO ("call: do_clear" ' % G ')
  echo.
  echo goto theEnd
  : do_clear
  Echo %1 of compensation
  wevtutil.exe cl %1
  Goto: eof
  : noAdmin
  output

• Where in the event error Codes BSOD Windows XP store Viewer

  As the title States where Windows XP Professional SP3 with 0 x 86 stores the error logs when a blue screen happens? I can not find I checked in the system log, but could not yet identify the BSOD error codes. I activated to connect with these error codes when it occurs.

  Can someone tell me where to find the error codes to stop Windows (BSOD)? Also, if you can describe what the entry will look like it should help.

  Thank you

  Victor

  VM

  You have several questions.

  1 - this one accident was linked to Redlight. sys with description BufferZone Kernel Module is a driver file of the BufferZone belonging to BufferZone product company.  That needs to be removed (at least for testing)
  
  2 - cumon
  Associated cumon.sys driver filter system provider (R) Win 7 kit Windows DDK CRCMon (it's a minor issue)

  3 - cmuda.sys related to cmuda.sys C-Media Audio Driver (WDM). YOURS IS 2002

  How to find drivers:

  
  -Google search for the name of the driver
  -compare Google results with what is installed on your system to determine on what device/program, it belongs to
  -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

  The most common drivers are listed on this page: driver reference

  http://www.carrona.org/dvrref.php

  http://SysNative.com/drivers/

  -Driver manufacturer links are on this page: http://www.carrona.org

• How to remove data in the Event Viewer log

  If I go to the event viewer in computer management and select these words. He did a search on the summary of the events of Admisitrator, recently seen nodes and newspaper summary. I want to remove all references in the summary of the events of the administrator, but I want to continue to use the log for all future events.

  I tried to do by ensuring that there is a check box FILE reviews "Show all hidden files" and I also took the checkbox "Hide protected operating system files".  I have to program Data/Microsoft/Event Viewer and the folder is EMPTY.

  Is there a way to do this correctly?

  The observer of events (local) summary of administrative events on my computer displays the event in the last hour, last 24 hours and 7 days. Do you mean that you have received errors Event ID 315 2,000 over the last 7 days?

  If you say yes then the priority should be to find why you get so many errors. It so happened that I had the same report and wrote the following to another forum on January 2, 2012. It can help to solve your problem.

  This error was gets me a few months. This afternoon, I tried to resolve an event ID: error 2 and found a blog that offers a solution to this problem:
  http://manlyelectronics.com.au/blog/resolve-Windows-error-session-HomeGroup-log-failed-to-start-with-the-following-error-0xC0000035-in-Event-Viewer-Microsoft-Windows/

  If you ignore the warning and click "Leave the homegroup" and restart the computer, your home network still works. You can also get no event IDS more: 2 errors and the bonus for me was a cessation of the event ID: 315 errors. I rebooted the computer several times and errors have ceased.

• Windows 7 computer all of the time, among the freezing error logs.

  It is one of the errors, there are a few caveats, but this is a mistake.

  Can you please help understand this error and how to fix it.

  Log name: System Source: Microsoft-Windows-DistributedCOM Date: 30/03/2013 12:28:16 AM event ID: 10010 task category: no level: error keywords: Classic user: n/a computer: MOM-PC Description: the server {995C996E-D918-4A8C-A302-45719A6F4EA7} is not registered with DCOM within the required. The event XML: 1001002000 x 80000000000000123056MUM-PCSystem                                                                                 {995C996E-D918-4A8C-A302-45719A6F4EA7}     

  Hello

  Thanks for posting your question in the Microsoft Community forum.

  We can refer to this article and check if that helps.

  Windows hangs or freezes: http://support.microsoft.com/kb/2681286?wa=wsignin1.0#method5

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• is it possible to cancel the windows error checking after he was executed

  Windows reported an error with an external hard drive.  In a first point to solve this problem the disc has been selected in working and error checking station in selected properties and tools. This was the value automatically fix system errors file and Scan for and attempt recovery of bad sectors.

  The analysis generated an error message that the drive had not been fixed. After the scan, it produced two audit records of fixed size disk files that are of no use. It is possibel to cancel this operation, as well as a more suitable tool for the recovery of lost data, as Testdisk can be used.

  Once you write on a disc to try to repair or recover files that you have overwrittten areas of training that would have contained data recovery.  There is no reverse, delete or Cancel to a disk error, control of process if you allow changes to be written to the disk.  So you may well and truly out of luck.

• Client listeners who call Server on fields only listeners take account of changes made on the event field

  Hello

  I have this sample application:

  1. I have a view object with a view criteria added to my data model of the app module.
  2. Then, in a page fragment /, I created a table based on this view object, and drag-and - drop operation ExecuteWithParam binds variables to the page as input fields of text with clientComponent = 'true '.
  3. Next, I added a listener client in each of the fields of type keyPress entry to call the following JavaScript method whenever the user presses the Enter key:

  function handleEnterEvent(evt) {
                        var _keyCode = evt.getKeyCode();
                        //check for Enter Key
                        if (_keyCode == AdfKeyStroke.ENTER_KEY ){
                            var comp = evt.getSource();
                            AdfCustomEvent.queue(comp, "EnterEvent", {}, false);
                            evt.cancel();
                        }
                     }
  

  4. then I added a server listener to these same "EnterEvent" type text input fields to call a method in my grain of support, that basically runs the OperationBinding ExecuteWithParam programmatically.

  The problem:

  1. I type "123" in my it1 text entry field and press the Enter key. The operation is performed and the results of the table are filtered as expected with the view criteria.
  2. I then clear the value in my it1, change the cursor in my it2 of text entry (without pressing enter), type 'Hello' and press the Enter key. The operation is performed, but the results are incorrect - the results indicate values as if the value "123" was always filled the it1 (and respective value of binding).
  3. If I do the cursor resume my cleared it1 text input and press the Enter button, the results are now correct...

  It's like bind values are updated only when the client event is triggered in this specific field... How should it be properly implemented? What Miss me?

  Thanks in advance. Kind regards

  -Tiago Vidigal

  Try to set autoSubmit = "true" for the text input element

  Timo

• PIXMA MG5220. While changing ink got the C000 error code. Tried to turn on. It still does not.

  I changed the ink when I got a C000 error code. He said turn the printer off, then on and if it still does not read the manual. The manual is no refernce this error code. Any ideas?

  Thanks in advance.

  Hello.

  This problem may occur when there is a loose object stuck inside the printer, or if one of the ink tanks was not sitting correctly.  Please, try the following:

  1. with the cover open, disconnect the power supply to the back of the printer or the wall.

  2. search for all objects or in the printer packaging material, delete if necessary.

  3 gently move as close to you as possible ink tank support.  Try to push the nearest ink tank down.  Once activated, try to close the ink tank support, repeat as needed.

  If you encounter resistance, do not go away while: support of the ink tank.

  If the error persists, find more help contact us.

• Cancelled the event free but was still charged $164,85

  I recently signed up for a free trial of Adobe Stock who announced that you can upload 10 images free stock with the free trial version. I downloaded the images and decided it wasn't a good investment for me to pay after the trial. I cancelled one week before the date of the end of the trial, but now I see a charge for $186,85 in my account. How can I reconcile this?

  The money was repaid on July 12, 2016.

  Concerning

  Stéphane

• Unsuccessful logon. Look for the details error log when loggin in Planning

  Hello
  
  Hope someone can help with a problem that has happened recently. I get the following message when you try to connect to Hyperion Planning: -.
  
  "Unsuccessful logon. Check the log for details"
  
  What happened to our instance of development only, which has recently been improved 9.3.1 to 9.3.3. It's only a matter of planning, I can connect to shared services, EAS & workspace by using the same credentials.
  
  After the upgrade to 9.3.3 we were able to connect to schedule and use the system, so I'm not sure that the upgrade was the cause. I tried to launch the configuration utility that has had no effect and also tried searching online, nothing helps.
  
  Has anyone seen similar problems or nobody knows what logs the error means that there is no error message in the planning log?
  
  Thank you
  
  Stephen

  Here's your number

  Cannot create the JDBC connection. java.sql.SQLException: [Hyperion] [Oracle JDBC Driver] [Oracle] ORA-01017: name of user and password invalid. connection refused

  The details of the source of data is incorrect, you must change the data source and enter the name of user and password correct

  See you soon

  John
  http://John-Goodwin.blogspot.com/