detection of network services.

Similar Questions

• My laptop cannot detect wireless networks after using the Windows Update service. Technical support, very desperate need.

  I tried the direct technical support, but it seemed to have cut. Given that I can no longer connect to the internet on my laptop, I'm with my playstation browser and painfully by typing with the controller.

  My probllem.
  I have an ASUS Intel Core i3 - 2350M CPU @ 2.30 GHZ running Windows 7 home premium. I've selected "Windows Update" in the start menu and proceeded to download and install all updates. Once the updates have been installed, my laptop couldn't detect wireless networks which means that I can't connect to my router and have lost the internet.
  Device Manager indicates 802.11n Wireless LAN Card is working properly.
  Windows did create a restore point before installing the updates, but everytime I try a restore I get the following message
  "System Restore has failed. Your computer's system files and settings were not changed
  Details
  System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus program and restart System Restore.
  An unspecified error occurred during the restoration of the system (0x80070005)"
  "I disabled anti Virus AVG and COMODO firewall only to receive the same message, and it now appears that the restore point disappeared as if by magic, saying system restore ' no. restore points were created.
  Updating installed Windows the following
  Microsoft .NET Framework 4.5 1 4.5.50938
  Microsoft Office Home and Business 2010...
  Service Pack 2 for Microsoft Office 2010...
  Microsoft driver (keyboard) 21/04/2009
  Microsoft driver (mouse) 21/04/2009
  Driver Microsoft (System) of 21/06/2009...
  Microsoft driver (System) 21/06/2006
  Driver Microsoft (System) of 21/06/2006...
  RALink Technology, Corp. (Net) 02/04/2013 pilot
  Update for Microsoft Windows
  Update for
  Update for
  Well when the restore point was present he says that these things will be deleted that's where I got the list, but as I said the restoration failed and disappeared.
  I have reset my router but my laptop doesn't detect a network and there are usually 10 in the region and it shows nothing. My router is fine, as I use it now with my playstation.
  Please I really need help, how do I get my laptop to detect the wireless network. If someone could give me a few steps to do, please.

  Most laptops have a switch that turns the wifi radio on or off.  Often, it is a combination of the Fn key and one of the F keys.  It may be a physical switch somewhere on the laptop.  See your manual for details.

  If this isn't the problem...

  What is the brand and model of your router?  Almost all wifi routers also have at least one Ethernet port, you can connect your computer to the router with an Ethernet cable and download the right driver for your http://www.asus.com/support wireless card
  Have you tried to "Roll back driver" in the "Driver" tab of your adapter wifi 'properties' in Device Manager?  At the very least, determine which version of the driver is installed, and compare that to the current version on the asus support site.

• HPE-475 wireless card detects only networks

  For these last months, occasionally, my computer would start but be unable to detect wireless networks. It seems that l ' simply down to an hour or two by magic would solve it. Research at the time indicated that he was unable to find a driver for some reason any.

  However, today, several hours of the computer being off has not solved the problem, and the Device Manager indicates that the card works fine, without worries of pilot. Maybe, I'm looking at the wrong thing.

  I was able to connect using an old wireless dongle, but I don't want that it is the permanent solution.

  What can I do to better diagnose and solve the problem? I searched a bit, but couldn't find anything that seemed specific to this situation.

  Product name: HPE-475

  Product number: BU082AA #ABG

  Operating system: Windows 7 Home Premium Service Pack 1

  Error messages: No.

  Recent changes: No.

  Performed troubleshooting: attempted to "Diagnose" through network connections. He suggested to check the router. The router is fine, several other devices are able to connect. Diagnosis then says it cannot solve the problem of connectivity.

  Thanks in advance!

  -Phil.

  Hello

  If the WIFI worked very well using the current router then mixed mode setting is not the problem.

  If Device Manager shows no errors and you cannot connect wirelessly then the WIFI card is most likely the problem.

  Good to hear you have an extended warranty.

  ContactHP support.

  Jaco

• Had to replace the hard drive, windows xp restore, now unable to detect wireless networks.

  Had to have my hard drive on my Dell replaced, restored Windows XP netbook, now I am unable to detect wireless networks. Someone at - it the answer? Thank you.

  Hi DeAnnaW,
   
  Follow the steps in this link to fix the problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  Note: The steps in the link are applied to the other service pack versions of Windows XP as well.

• 'Detected wireless networks' followed by 'no wireless networks were found in range ".

  Trying to help a friend with their laptop!  It's a Lenovo R61i laptop model A 8932, 54, around the age of 16 months.  WIN/XP SP3 is the only OS.  He was working on this wireless network until they are gone on vacation and tried to connect to public wireless networks! Their daughter portable computer continues to operate properly with this wireless network, and it also shows the neighborhood wireless networks as well.  The R61i has a built-in 'Pro\wireless Intel 3945ABG Network ' wireless wireless adapter.

  Connectivity and internet access works very well through the ethernet port.

  Here's what I've done so far:

  He has Norton AV.  I made sure that it was up to date and then ran a full system scan.  It was clean.

  Any help will be appreciated, and I WILL ANSWER about the results!

  Windows Update ran (after I got it work - see below) for all critical updates.

  Fact a "repair" on the wireless connection with these results:

  • Wireless networks detected
  • No wireless networks were found in range
  • Windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network

  That when the laptop is 5 feet of the wireless router.  It is a Dlink
  Updated the driver from Lenovo web site by the support of the Intel boards:

  • former pilot was 11.1.1.11
  • new driver is 12.4.0.21 with a date of 04/03/2009

  Went into the BIOS and reset the BIOS to its original, saved and reloaded settings.

  Checked the Device Manager.  Everything looks OK, no yellow or red devices

  Remove the network card and let Windows re - create.

  Disabled and enabled the network card

  Check the event logs.  The only entrance is on the system log.  I don't know if this event log entry is significant or not, but it's here:

  Source: NETw5x32, zero category, event 7036.
  The service entered the \DEVICE\{78E5EBB6-A194-4E9F-A840-E05CC39A5823} State.

  0000: 00 00 08 00 02 00 62 00
  0008: 00 00 00 00 7 c 00 40 1 b
  0010: 00 00 00 00 00 00 00 00
  0018: 00 00 00 00 00 00 00 00
  0020: 00 00 00 00 00 00 00 00
  0028: 57 44 52 56 00 00 00 e7

  I have not yet tried it raise in "Safe Mode with networking".

  I would add that "Windows Update" was also not working. Graduation: A few updates have not been installed.  Error code 0 x 41. I had going in downloading and installing the latest version of Windows Installer 3.1, version 3.1.4001.5512

  Do not think that there is a relationship between these two issues, but stranger things have happened.

  The laptop has a 3-year extended warranty and I'm about to throw it in the face of Lenovo as a hardware error.  The thing that blows my mind is 'Detected wireless networks' followed by 'no wireless networks were found in range ".

  Hi Shawn

  Thank you for your help.  Here is the final solution to this problem.

  The "clean boot" you suggested worked as described, but it had no effect of awareness of wireless networks.  Ditto to start in "Safe Mode with network.  We took the laptop to Office Depot; They basically ran the same tests that I did, with the same results.  Their technology has managed to get it to connect to Wireless store by manually setting, but it would not show under 'view available networks '.  He suggested that we call their 800 support number.  The only novelty with that phone support guy came was to "Ping 127.0.0.1" which I don't think inherent in the wireless somehow.  He wanted me to call Comcast to check the internet connection.  Under the principle of "do not create a new problem while you're working on a problem", I resisted to go here as two other computers work fine on this connection from Comcast.

  We finally opted for a full charge of Windows.  This included a blue key on the laptop at boot to bring up "Rescue and recovery", then by specifying 'Restore my hard drive to the original factory condition' and "don't save all files" - we have previously saved the contents of "My Documents" on a USB key.  This charge really don't take as much time as I thought he might; only about an hour.  Most importantly - WIRELESS NETWORKS APPEAR NOW; and connect as it should!  We had to apply SP3 as reloading he brought back to SP2 status.

  I guess the lesson here is that sometimes he just reload Windows is the shortest possible solution to some of these mysterious problems.

  I had a hard time to convince me it was a hardware problem, when the system detects wireless networks but are simply not them!

  Thanks again for your help.

  Bruce Butler (np560)

• How to fix no network service on iPhone 6plus

  How to fix no network service on iPhone 6plus

  Try here > If you can not connect to a cellular or cell - data Apple Support Network

• Satellite T135D - cannot detect wireless networks

  I bought a T135D early January.
  Everything was happy until one day my laptop decides it cannot detect wireless networks, and even less to connect to one.
  I don't think the T135 came with a manual switch, while in the BIOS it says it's on.

  The graph with the antenna and 4 bars charge is no longer at startup, or the light that lights up on the front of my laptop. It's frustrating to have this kind of problem so early in the game with the T135D.

  Any help would be appreciated.

  Hello

  The wireless network must be activated by pressing the FN + F8 key combination.
  Have you tried that?

  If not, please check it

  Of course, you must make sure that the WLan card driver is always up to date.
  Here you can find the most recent:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Satellite L650 does not detect wifi networks

  My laptop Toshiba Satellite L650 ceased to detect wireless networks.
  It shows only Dáil and vpn...

  The wireless network is not detected.
  I was able to connect to the network using my phone, so something was wrong with the laptop.

  I also checked if the broadcom 802.11n works or not and it appears as works perfectly.
  But don't detect is not wifi networks.

  Could someone help me with this?

  Wireless network card is enabled?
  Is WLAN led on when you use the FN + F8 key combination?

• iPhone 5 c cannot detect the network.

  Since the last 9.2.1 update my iPhone 5 c cannot detect the network.  Constantly 'finding '.  It took to the local repair shop and he told me the imei is missing and only Apple can help.  Any ideas, thank you.

  A missing IMEI is a fatal error which cannot be set. This is usually the result of the attempt to jailbreak or hack the phone unlock illegally, but not exclusively.

  Where, exactly, do you have the phone? It was jailbroken? Never 'unlocked' by one person other than the carrier, so it was initially locked?

• Re: Satellite L450-173 - unable to detect wireless networks

  I have a similar problem with my satellite L450-173.

  I bought this laptop without OS and installed win 7.
  I found and downloaded the latest drivers toshiba WLAN support and download page and my Device Manager indicates that the device is turned on and that it works correctly.

  However, I am unable to detect the networks without wire in the box (alltough there are at least three in the district).
  I have a home network with the router. When I connect to my laptop with a LAN cable, it connects automatically without problem. But I can not connect via my wireless connection.

  Windows troubleshooting is of no use.
  I downloaded the chipset drivers updated too (following the suggestion by an online forum), but which did not help at all.
  My "doctor Conectivity" reported that my wlan adapter is 'on', but when I enter the 'Radar' option, it reports that this wireless network device is disabled. I tried to disable and then enable once again, but it did not help. I also used the option reset address IP - no use. My IP address is set to auto because my network is connected by the router.
  I tried pressing FN + F8 but I have not noticed any change.

  Indicator LED for a wireless connection at the front of the laptop is always red.
  I read many forums linking similar issues to win 7, but I have not found any solution.

  Any ideas?

  Hello

  Eventually the WiFi network is disabled and so you cannot connect to the Wlan router.
  If the FN + F8 does not change the status of WLan, then it would mean that Don t FN buttons work properly have you checked if the other FN keys work?

  You must reinstall the VAP (value added package) to obtain the keys FN working again
  If you want to use the Fn + F8 then you should see (flashcard) WLan icon on the screen

  Another idea;
  You can toggle the wifi in the Device Manager-> card Wlan-> properties-> Advanced tab.
  Check this box

  PS: If the BIOS is not updated, then you need to update it too!

• IdeaPad Y560 wifi detects all networks but don't connect at all!

  I have an ideapad y560, recently I installed a fresh win 7 ultimate 64-bit. Everything is perfect, except the wifi, it is not connect to any network, even though it detects all the and asks for the key, but ends up saying "windows could not connect to .

  Let me explain in words:

  1. wireless driver works correctly

  2 - Wifi detects all networks and demand the key to connect

  3 but it says "Windows could not connect to.

  4. connect to ad hoc networks without problem

  5 - LAN connection works perfectly

  6. each driver is updated (network, BIOS, Bluetooth...)

  7 - Windows is being updated

  8. all the existing solutions in each forum are put to the test

  Any suggestions?

  Hello

  He had a preinstalled operating system that has win 7 home x 64, the computer was full of viruses so I need her erase and install a new one.

  The good news is I spent all night on this subject, and this morning I fixed the problem after 72 hours. That was very interesting!

  I went on the last restore point and it fixed the problem, I do not know how, because the wifi was not connect from the first moment, I installed the win 7 ultimate, which was average, before the creation of this restore point!

  Thanks if buddy!

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• MBSA - NT AUTHORITY\Network Service reported as invalid domain name

  We use a Small Business Server 2008.

  When we ran a report using MBSA 2.2, we received a critical error incomplete analysis on the database of MSSQL$ MICROSOFT ##SSEE with error:

  This represent a field.  Baseline Security Analyzer cannot determine if it belongs to the Admins group of the domain due to the following error: 1212 the format of the specified domain name is invalid.

  The specified domain is NT AUTHORITY\Network Service.

  How can I fix?

  You will find appropriate supportby starting your own, new thread in the SBS forum: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads

• Advanced local network service

  Hello

  I just recently received my Dell laptop about a week ago and I followed all the installation instructions and now whenever I start my laptop, I get a pop window that says:
  "Advanced Networking Service has stopped working and was closed: a problem caused the application to stop functioning properly." Windows will notify you if a solution is available. »
  Also, with this pop-up, the reader of CD/DVD made one sound, as if he is reading a disc, but there is nothing in there. Can you please tell me what is happening and how I can fix this problem? Thank you.

  Turn off the Service of advanced networking under services.msc (1 service in the services list), and then restart your computer.

  Thank you for using the Microsoft answers Forum.

  Let us know how it goes.

• HP Laserjet Pro 1102w: HP 1102w cannot detect the network.

  When you try to install my HP 1102w for wireless through my Motorola modem/router printing the printer is unable to detect the network.  The network on the printer light continues to Flash blue, indicating that it is looking for the network.  I have other devices connected to the router and all work perfectly.

  Counsel pertaining to this matter is greatly appeciated.

  Thank you

  cbs117

  Hey @cbs117,

  Welcome to the Forums of HP Support!

  I see that you experience some problems with your Laserjet P1102w printer connection to your wireless network. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off.
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.

  Now if the blue light is not solid, the next step is to run the HP installation by clicking on the icon on your PC with a name similar to the Laserjet P1100 series. If you do not have this icon, download the latest drivers at this link.

  Please let me know if you are able to connect the printer after you follow the above. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.