Determine the Version number
Hello
In the JDE, we can define the version number applications (by going into properties, then on Version :), I was wondering if there is a way to determine version number of the application that you programmatically entered here?) There are classes that allow you to do this?
Thank you
Solved please use
ApplicationDescriptor.currentApplicationDescriptor () .getVersion)
Tags: BlackBerry Developers
Similar Questions
-
I installed VMware Workstation 7.0.1 build 227600 on a Windows 7 64-bit machine. Update the VMware Tools using the compiler, one of the instructions is:
CP /mnt/cdrom/VMwareTools-x.x.x-xxxx.tar.gz /tmp/
How can I determine the values of x in this case? When I tried the following command:
CP /mnt/cdrom/VMwareTools-7.0.1-227600.tar.gz /tmp/
I received the following error message:
CP: cannot start ' / mnt/cdrom/VMwareTools-7.0.1-227600.tar.gz':
No such file or directory
The GuestOS I tried to run is:
Release of centOS 5.2 (Final)
I always use AutoComplete with tab to get the name of the file.
Type:
CP/mnt/cdrom/VM, and then press your tab key. He must complete the rest automatically.
Then complete the order with the part of tmp folder location.
Rick Blythe
Social media specialist
VMware Inc.
-
Script to determine the versions of ESX hosts
Hi all
I ran a few basic using Power CLi reports & a few gui based ones, but im findning it is difficult to determine the versions of the host. That is to say, I have some hosts ESX and ESXi on the same number of version 4.0.0 is there a way to filter hosts that are running on ESX as im going through a process of upgrading all hosts to ESXi 4.1.
Thanks in advance.
Yes, use
Get-VMHost | Select Name,@{N="Product; E={$_. Extensiondata.Config.Product.Name}}
-
How to determine the Version of the Oracle Identity Manager server?
Friends,
I have two questions about Identity Manager...?
How to determine the Version of the OIM 11 g Server?
How to determine the Version of the Server 9 IOM?
Thank youThe bundle of plates are observable by build number. If you go to metalink and check the patch bundle, there is a build number associated with them, usually also contained in the xellerate/config/Version.props file. What is written in XSD table during patching. Once installed, there is no identifier that says "applied BPXXX.
-Kevin
-
How can I see the version number of firefox in firefox29?
After the update to firefox29, there is no party named 'About' to see the version number or update firefox. Please help me. where is he? in the previous version even when I clicked on "check for updates" my firefox looked for new updates, but now I can not see this section.
To find out your version, please go to Menu, and then click
who is at the bottom and select the Menu "About Firefox".
I hope that now you can see the version. -
Where can I find the version number of the latest version of Firefox before downloading?
I have to ask permission to download Firefox at work and he needs version number before granting approval. Texas regulators use Firefox and work does not allow microsoft to explore internet. I need Firefox to use the reports and models of agencies. The download Web site does not list the version number. Where can I find the version number of the latest version of Firefox before downloading?
You can find the latest version of Firefox 20.0.x in all languages and for all systems operating here:
If you put a download link, her you should see the version of Firefox in the pop-up at the bottom of the screen.
-
Where can I find the version number of the ios 9.3 update before installing?
Where can I find the version number of an ios update before installing?
You can not. I would like to know as well. The current building is displayed in settings > general > all. When the phone offers you an update, it does not display the new version. One could assume that it is the latest available at that time, which at present is 13E237, but to my knowledge does not appear before the update.
-
How can I determine the version of Toshiba Assist?
How can I determine the version of attribution that is installed on my Satellite X 200 with Windows Vista Premium SP 1AA. Operating system?
Go to the control panel and start the option programs and features.
After full load, you will find listed Toshiba Assist it.
Click on it and on the bottom, you will find information about the version of publisher, size and product. -
Hi I tried to determine the version of my laptop HDMI port HP ENVY 17 j073ca however I have found no info on this subject. Could anyone help shed any light on this? Thank you!
Hello
Many TV can make upscan which means that they accept the entry at lower resolution and then fill the entire screen. I don't know your TV/monitor, but normally it can do the work in this way.
Update: all modern televisions must have a lot of options for entry reports, you can watch old movies (ratio 4:3) on the use of 16:9 zoom function.
Kind regards.
-
Can I see the version number of a sequence file password protected movie file?
We distribute our environment protected from viewing sequences. I would like to give my users the ability to check the correct version of these files of frame sequence, but as far as I see it, it is not possible to display the version number of file in sequence the sequence editor without providing the password.
Is it possible to display the version number of a file of sequence protected without the password?
Best regards
Peter
Try to do this
RunState.Engine.GetFileInformation (
). GetFileVersion ( ) -
How can I determine the version UEFI implemented by the firmware of a PC?
I found several ways to determine the version of the firmware/BIOS on a PC – for example mine is FRIEND v8.15 (05/02/2013).
But is there anyway to determine which version of the UEFI is implemented by this firmware?
I tried to find a description of the FRIEND v8.15 which maybe provided this information, but has not been successful.
As a last resort, I considered as written to the company - but before that, any other ideas you have are appreciated.
Hello
Windows 7 doesn't support secure boot. A lot of settings in the BIOS to do still get Windows 7 to boot UEFI mode as well as the support of compatibility (CSM) model in the BIOS offers the correct BIOS options.
Frankly, I wouldn't buy a W7 PC delivered these days here as W10 is a great OS. If you have an application that proved not to be compatible with W10 then run it in compatibility mode.
I've not seen many cases where different levels of BIOS are available for W7 or W8 and W10. However, you might find instances where the BIOS runs only in UEFI mode.
-
Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?
Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...
-
Need to find the version number referring to the last name change for each emplid.
emplID Name age Version --- ----- --- -------- 1 ABC 25 2 1 ABC 26 5 1 def 27 9 1 def 28 15 1 def 29 18 2 JKL 15 5 2 MNO 16 8 2 MNO 17 11 2 PQR 18 20 Need to find the version number referring to the last name change for each emplid.
As indicated by the version number change when there is change in age as well, but I need a query that gives the version number referring to the last name change for each emplid.
with
DATA_TABLE (EmplId, Name, Age, version) as
(select 1, 'abc', 25, 2 double Union all
Select 1, 'abc', 26, 5 Union double all the
Select 1, 'def', 27, 9 double Union all
Select 1, 'def', 28, 15 double Union all
Select 1, 'def', 29, 18 double Union all
Select 2, 'jkl', 15 5 Union double all the
Select 2, 'mno', 16, 8 double Union all
Select 2, 'mno', 17, 11 double Union all
Select 2, 'pqr', 18, 20 double
)
Select emplid,
Max (Name) name of Dungeon (dense_rank last order by version).
Max (Age) age of Dungeon (dense_rank last order by version).
version Max (version)
from (select emplid, name, version,)
-case where name! = lag(name,1,name) on (emplid version order partition)
then "renamed".
end change
of data_table
)
where the change is not null
Emplid group
EMPLID NAME AGE VERSION 1 def 27 9 2 PQR 18 20 Concerning
Etbin
-
ASM: determine the total number of bytes read/written &; Ops / s
Hello
My environment:
- Oracle 11.2.0.3 EE
- SuSE Enterprise Linux 11 SP1, 64-bit
- ASM starts on RAW LUNS (2 per group) Hitachi disk storage
- DB-server: HP DL380 G7
I want to disc ASM ssd drive switch, direct attach to via HP DS2700 attachment:
- DiskGroup + DATA
5x400GB Enterprise SSD, RAID 5, 1.6 TB of raw capacity
used to redo, data files - DiskGroup + ARCH
4x400GB Enterprise SSD, RAID0 + 1, capacity of 800GBraw
used to redo, Archives, Flash Recovery Area
As I understand until this SSD technology, SSD have a livetime, indicating that there is a guaranteed amount of data that can be read/written on this subject. My goal is to design a system that has no point of two ssd failure in the same RAID group.
- How can I determine the total number of bytes read/written in ASM starts so far?
My idea was to dermine ASM block size (select block_size from v$ asm_diskgroup) and then look at total reads and writes columns via iostat command in asmcmd. I guess that these values are since the last start of the DSO. - Is it possible to determine the IOPS / sec per diskgroup?
Thank you
SCSICasimir wrote:
Do the calculation for 1. gives me an odd result:
ASMCMD disk group management controls said that the default view is the amount of bytes and that the -io parameter must be used to display the number of e/s instead.
-
Need to update the version number of app for the app upgrade
Hello, I need help with my application (magazine) on the App Store update. I used different platform for the creation of digital publications. Now I start with DPS. I want to update my application on DPS, but there is problem with version about contemporary version 3.0.1 and App Builder generates the 1.0.0 version. Is it possible change version manually?
You will need to call tech support and have them increase the version number for you. We have some support products support the people here as well, I'll change the title of your post a bit more obvious, and I hope that they will see.
Neil
Maybe you are looking for
-
Toshiba virtual store - only blank white page
Hi guys a friend recently gave me his Toshiba Journ.E touch.She had already unpacked and on listening. Well, when I got in, I tried to visit * Toshiba Virtual Store *.But when I did, I saw a blank page. I waited 30 minutes (!) but still nothing.I ask
-
Y series laptop damaged - how can I do to repair
Hi Lenovo support, I tried to call customer service, but the I have not received any response. I want to send my laptop for repairs, updates and software revision. How can I go to, I have 2 - year accidental damage and it is still under warranty. Any
-
What I try to do is read a few lines of a file, concatenate a constant to each line and save the final result File a.txt: N4 N3 N2 etc. Final result: $n4 $n3 $n2 etc. What I did, I get the number of rows The loop loop by the number of lines. I then c
-
How to change the folder opens when windows Explorer opens
In XP Service Pack 3, when Win Explorer is open, files that open has changed on its own (or I don't know what I did to cause this change). Records of Documents are all posted, but the C: drive is closed, where it will display all folders to open at t
-
I have a MSI motherboard and I am running Windows 7 Pro using a Pentium dual core E5200 @ 2.50 GHz Windows says I need 'drivers' for the second processor dual-core. Things change VERY quickly... I'm a tech from the old computer and this error or fa