Determine what is my network card and what my sound card.

Similar Questions

• How to retrieve the network icons and the taskbar sound? They disappeared

  original title: extraction and network icons

  How to retrieve the network icons and the taskbar sound?  They disappear from the notification area of the taskbar.

  Hello

  There are different ways to fix it

  read all the information on the link below

  Try Method 1 or 3

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• How can I determine what NETWORK card for vShere driver?

  I want download the driver of NETWORK card adapter: Marvell 8001 that is integrated on the motherboard for vShere.

  I checked that the kernel has been 2.6.18 - 128.ESX. But, I don't know what Linux is, for example, Red Hat or anything else. So, how do I determine what NETWORK card for her driver and where I ca nget it?

  Thank you!

  George

  Just thought I'd provide the link to the HCL.   http://www.VMware.com/resources/compatibility/

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• What is a 6to4 adapter and should I worry, it is not listed in the network card?

  I was surfing the web and found references to map Microsoft 6to4.  What is it and should I be worried that my PC has not listed under network card?  I have that card Microsoft ISATAP Adapter and Terado listed Microsoft (relating to ipv6).  Others are the WAN Miniports.  I have this on two PC's (Dell & HP) and the HP PC is quite recent (just do a factory restore due to a glitchy mother board driver update that causes the hard disk light flashes every second).

  Hello

  No, see fit that you haven't. The section between the = and = would be my
  answer IF you had an and, of course, which does not apply to you.

  ================

  Don't you worry about this unless you have found errors. If so see these threads.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/754c8f29-3a87-4E77-Babd-a69c8910e17e

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/05a8849e-89c1-4CC9-8004-f6d07a4fdf8b

  http://www.cableforum.co.UK/Board/34932105-post6.html

  ------------------------------

  A new Microsoft 6to4 map is created unexpectedly after restarting Windows 7 or Windows
  Server 2008 R2
  http://support.Microsoft.com/kb/980486

  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7
  and Windows Server 2008
  http://support.Microsoft.com/kb/929852/en-us

  Response of Lionel Chen
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-

  ================

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can what kind of network card I add?

  CTRL + Alt + S gives me this information, but none of this is acknowledged by HP support as a valid system site search. I just want to know what type of expansion of this machine slot has, so I can order a new network card. If someone can tell me how to get either the HP support site search to work, or tell me how to determine the right type of NETWORK card to buy, I would be grateful.

  System information displayed:

  Model #: p6142p
  Product #: NP218AA-ABA
  Serial No.:[personal information deleted]
  Software Build #: 93NAv6PrA2
  Service ID #: [personal information]
  PCBRAND: Pavilion

  Hello

  The following link shows the specifications of your machine:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01746796&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=3942799&prodTypeId=12454

  It has 3 PCIe x 1 and a PCIe x 16 graphics slots. You can buy a PCIe NIC card (called Networ adapter) and add to your machine, something similar to one of the following (for wired network)

  http://www.Amazon.com/Intel-Gigabit-network-adapter-EXPI9301CTBLK/DP/B001CY0P7G

  or the next a wireless network:

  http://www.Amazon.com/PCE-N13-Wireless-N-Network-transmit-interface/DP/B0039GVOAM

  Kind regards.

• Satellite A30 - what wireless network cards are supported?

  Have a computer Satellite A30 laptop-404, I wonder what kind of card Mini-PCI Wireless would be compatible with my PC?

  Found this one for example.

  Gigabyte GN-WI01GS MINI PCI ADAPT 802. 11B / G BASE of RALINK CHIP SNM

  Anyone who knows what other types could be used?

  Hello

  Hmm, well I've never heard of Gigabyte WLAN cards and I don't know laptops that are equipped with these cards.

  I checked Toshiba Web site and some Satellite A30 models shipped with a card Atheros and Intel WLAN. So, I recommend buying a those manufactures wireless network card.
  For example Wireless LAN Mini PCI card (2, 4 GHz, 802 11 b) PA3212U-3MPC should be compatible.

  Good bye

• Tecra S1: Should what type of wireless network card I?

  Hello. I do a new install of XP, and I don't have the CD that came with the computer. I have before, but have not been able to get the wireless or bluetooth to work. I need to know what type of wireless card I have...
  Tecra S1 model number: PT831A - 67CS8

  can anyone help?

  Thank you
  -mat

  Hello

  As far as I know that the Tecra S1 has no card network wireless not installed, but you can improve it with a minPCI wireless network card.
  The drivers needed, you must download it from the page of the Toshiba driver or drivers will come with a wireless network card.
  Also the Bluetooth is an option on this unit.

• What network cards do I need

  What network cards I need to run a high-speed dsl connection if I don't need to be on a network?

  You should contact your supplier of access and knowledge, but none on shelf NIC should work given that most modern cards are supported 100 MB to 1 GB transfer rate.

• PC laptop Pavilion 17: what is the NETWORK card in the Pavilion 17?

  This machine is my daughter-in-law. She had a HD crash & replaced the HD. She bought Win 7 Pro 64 bits/load

  on the new HD. I got all operational except for the network card.  I need to load the drivers for the NETWORK card, but I can't find any explanation as to what is the make and model in this machine.  News machine below:

  Model 17-e049WM

  Product E0J75UA #ABA

  SER # 5CD3201PVG

  SYS COUNCIL 1984

  Looks like it's realtek, both wireless and NIC manufacturer. Although the model of the NETWORK adapter is not available, you can download these drivers from here

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&PFID=4&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  or here at HP.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63396.exe

• The message that it is has no network adapter and not configured. What's wrong???

  I have a Gateway LX6810 - 01 desktop runnning windows Vista Edition Albums Home Premium, 64 bit, 8 GB of RAM, all the latest updates and Service Pack 2. I connect to the internet through the network connection AT & T Uverse high-speed broadband (12gbps). He worked for over two years now with no problems until now. All of a sudden one day after I rebooted the machine there is no internet connection. When I went to the network and sharing Center, I receive a message that there is no installed network devices. SO, I went to the Device Manager window and there is no device listed network but when I opened the "hidden devices" he has been. (Why it is hidden I have not the slightest idea). SO, I went to the BIOS and checked for if ensure the LAN has been "activated" and it WAS.  I don't always get the same message "no network installed devices. SO then I went on the website gateway and downloaded the driver LAN for my machine and my LAN and reinstalled the driver... I ALWAYS get the same message and I still have no Internet connetion. WHAT could be the problem? Although I consider myself relatively smart, I'm NOT a computer guru, so be kind and state your suggestions in the jargon of the 'no' then I'll understand. Thanks for your help. I'm out of ideas.

  Hello

  Thanks for posting the request in the Microsoft community!

  I understand that you receive the error "no network listed device" on the Device Manager window and you don't have an Internet connection. We will try to solve this problem by following the suggestions.

  1. don't you make changes on the computer before the show?
  2. What is the exact error message that you receive when you try to connect to the Internet?
  3. what anti-virus software is installed on the computer?

  To resolve the connection problem, try suggestions

  Method 1:
  Try the steps in the link and check.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  Temporarily disable the antivirus and firewall installed on the computer and check.

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  NOTE: turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3:
  If the steps above do not help, you can reset the TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself: http

  Method 4:
  You can uninstall and reinstall the network card and check.
  a. Click Start, type device manager in the search box of start and press ENTER.
  b. Locate the network adapters and expand the same.
  c. Select the wireless connection, right click and choose uninstall.
  d. restart the computer, if prompted.
  You can download the network drivers update of the website of the manufacturer of the system and check:

  Method 5:
  If you use Internet Explorer, then you can read the following article and try the suggestions and check.

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  Please follow the recommended steps and post if you still experience the problem.  I'd be happy to help you further.

• I don't know what wireless network card driver to install for Satellite A200

  Hello

  Im trying to install the adapter wireless by Satellite A200 (PSAE0E) and can not make it work.
  The website offers different drivers and says that I have to click on "How to identify my wireless network card driver", but that the document does not exist.

  Can anyone help?

  Thank you

  According to the specifications of the laptop your Satellite has Atheros AR5006EX wireless network adapter.
  Download from http://aps2.toshiba-tro.de/wlan/

  Just choose the right operating system.

• How can you tell what your vSwitch NETWORK card uses?

  We are still at the experimental stage with our ESXi 4.1 installation and have 4 cards assigned to a vSwitch network. 3 are active and it is defined as the day before. Is there a way to tell which network cards are actually get used or are all 3 active cards get used both for the collection of NETWORK adapters? I have attached a few screenshots to view our installation.

  Another thing is that the day before, we noticed NIC for network management and VMnetwork are different and which seemed to have been changed on their own. Is this normal? For example the day before NIC for network management is set to vmnic3 and the NIC for the VMnetwork has the value vmnic2

  Well they are all 'used' to my knowledge.  The only way I've really seen to see one that is circulating is to make a display of advanced host performance and look at networking. From there on, it lists each nic and the amount of data it is to push through. I know that we have 4 s NIC team (similar to your Setup less standby configuration) and usually only a NETWORK card pushes the data at once.

• How can I detect or determine what hardware I have in my office?

  Is there a web page on the HP site where I can type my HP serial number and determine what equipment I have in my office?  I can't find a page like this on the HP website.  It's easy to do on the Dell site.   Also, if there are a few tools I can run to automatically detect the HW, that would be great.  I don't want to break the box to figure it all out.

  OK, the link says I can have one of the 4 possible different video cards.  Lame pretty if you ask me to HP.  With Dell, I can get the exact set of HW used when the machine has been built since my serial number.   Save me from having to break open all the boxes during the installation of things.

  Anyway, thanks, looks like I have to crack open my machines.

• Retired HP Pavilion a6000n PC and can not find the driver for Network Card card do? Download Driver?

  Gradient of the Visa OS came with the PC for XP.  Installed new HD and partitioned drive so there is no pass file.

  I found that it is management of network integrated 10/100 Base-T interface but cannot find the manufacturer to use it Web site.  In addition, been

  playback ChipSet might need drivers or upgrade?  Don't know that much about this, but enough to get in trouble if

  I'm not "coached" through it all.  Low grade was the Visa MS HP accompanying MS XP Professional.                               Need a link or help find the Driver for the network card.

  Thank you.

  Thank you very much... which seems to do the job for letting me use the network card.  Once I installed the chipset you me too, my IE was able to get the net.  The only thing that happened that I wonder about, what I choose to accept or not something RAID, which I accepted and it seems to work with one small annoying side affect: I can't get Windows Update to run.  I get this error: 0x8024400a and I spent literally hours looking for and trying different solutions, which none have worked. Do you think that there is something that would change this Nvidia software which would cause that?   I get out to the internet OK and can go to any web page.  It runs a bit slow, but I thought it might be because I'm using a newly installed Win XP and it has only 2 SP.  My next step in getting this thing to work was to run Windows Update and anti-virus stuff set.   Any way, thanks again for your help.

• on my network card, a question mark appears that wasn't there. He appeared as a "switch" until I disabled "sharing network". He went away for a day and returned. This is a hack of nieghborhood?

  My mother is a modem from Qwest. I'm on a laptop with wireless on the same account. We were on a homegroup network. I found a question mark on its network card and a photograph camera, on mine with the name 'switch' and no other info on this subject between the computer and the modem peak. I called Qwest and they said they didn't know what it was. So I disabled all the sharing network. He went away. 2 days ago. Today, I checked again, he had again disappeared from the workstation but now it's back on mine, but it shows up as a question mark, as it did on the desktop. And also, there were a few weird anomilies appear on our computers. Do I have a virus or maybe a neighborhood hacker?

  If you use Microsoft Security Essentials, start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected. Options vary by region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/) in the USA at this time. After an initial free consultation, will be charged a fee for assistance, based on the details of the case.

  If this is not the case, go to your provider AV.

  You can also try this web site - http://www.bleepingcomputer.com - contains details for most common infections, often immediately after that they started to appear in the wild, and instructions are provided for how to remove infections using their malware removal guides. They also have forums where you can seek assistance from people who specialize in the removal of malware.

  Here are other free programs that can help:

  Malwarebytes anti-malware free - http://www.malwarebytes.org/products/malwarebytes_free Please note, do not accept the trial version of MBAM Pro that it will conflict with MSE while the free version won't.

  SUPERAntiSpyware Free - http://www.superantispyware.com/downloadfile.html?productid=superantispywarefree

  TDSSKiller (free) - http://support.kaspersky.com/faq/?qid=208283363

  HitmanPro (free for 30 days) - http://www.surfright.nl/en/hitmanpro

• Network card and Dell Dimension 4550 (533MhzFSB)

  The geniuses out there know if its possible to install a wireless network card full to a desktop Dell Dimension 4550? Or would a Wireless N USB network adapter will work better? Any suggestions would be much appreciated. Rather than having to connect to a modem and all that fun jazz.

  I don't know what you mean by a "full" wireless network card, but if you can install an adapter wireless integrated (as one of THEM), depends on whether you have an empty expansion slot (and what kind of accommodation).  You can either open the case and look; Read the documentation that came with your computer; or go HERE and enter your service tag (you will need to use Internet Explorer, if you want to try the 'Analyzer' online to detect your current configuration.

  My suggestion, however, would be to go with a USB wireless adapter, one who has a fairly long USB cable preference so that you can get out the antenna located between the back of the computer and the wall.  Following the same reasoning, if you decide to use an internal adapter, try to find one with a removable antenna, so that you will be able to get an extension of antenna and put the antenna in a place better than behind the computer.

  Be aware that if you get a N (internal or external) wireless adapter, you won't get a flow and speed wireless-N if you connect to a Wireless N router/access point.