Dev Alpha 10.0.6 386 - touch - device sensitivity does not not to gestures

Similar Questions

• NB250/Device Manager does not recognize webcam

  Hello:

  I have NB250 with Windows 7. There is no indication of a webcam. Device Manager does not recognize it either. I know that there is a download application to search for it on my computer but I don't know where to look for it. Thank you.

  Post edited by: chizuka

  Check if the webcam is enabled in the BIOS.
  To access the press of BIOS F2 when starting the

• Toshiba Satellite A200 Synaptics Touch pad, scrolling does not work.

  Questions of Toshiba Satellite A200 SKU PSAF6A - 02Q01N Synaptics Touch pad, scrolling does not work.

  Operation system Win7 x 64, re-formatted and updated since Vista x 32, after having teething problems, install the drivers and do everything to work smoothly (for at least 2 months now), I managed. Today out of the blue the scrolling on the touchpad stopped working.

  I read on some forums that do, most said try using CCleaner to uninstall the driver and reinstalling.
  Tried to uninstall and reinstall the driver support Aus > drivers, done this, but received the error, (something) do not recognize the operating system.

  I went to the Synaptics site found a driver that has been recognized, it has installed but not really want to reboot the pc before I get some advice first. As there is a warning about the specific drivers for specific models and manufacturers...

  Help required, please.

  Hello

  Uninstall the existing touchpad driver and install it:

  http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-en-20090320132707.zip

  Recently, it has been already discussed on the dysfunction of the touchpad in this thread. But unfortunately it did not help him
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52689&TSTART=30

• Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

  Hi guys,.

  My Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

  Its not reading any cds/DVDs.

  Please could you help me how to fix it

  Once am put any DVD that the DVD is flashing and after a few seconds, his flashing no more.

  Mine is under WIndows Vista SP2

  I checked the CD-ROM/dvd-rom drivers in its 'active' display ' device working properly "Device Manager and registry also to 'upperclass' or 'lowerclass' settings entry just good.

  Please someone help me how to solve this problem.

  Thanks in advance.

  Kind regards

  Rambeau

  ++

  @bjawasa is 90% out of material. Lenovo ask to change your dvd - rom with a new free of charge if you have the warranty.

  You can call the help line: hindi or English speaking - 1800-3070-0010 (Toll-free) or 1800-113-324 (Toll-free)

• T420 W7 Base system device driver does not

  Hello

  After reinstalling W7 the lenovo Solution Center complained by saying that the system device driver does not work.

  I saw that the SD card reader was not working and so I covered the missing pilot was that one.

  The Lenovo page I downloaded the driver for the card Multi for W7 and T420 port. After installing the message disappeared and SD cards have been recognized correctly.

  However, after restarting the system, after some time, the message appeared again and the card reader no longer works.

  I have install again and the same happened. He worked and after restarting two has stopped working.

  If find this mysterious altogether. I wonder if anyone knows how to solve this problem.

  I managed to solve the problem. Just in case anyone has the same problem I explain here how I did, although I'm not sure that this solution is universal.

  1 install the drivers from the Lenovo site.

  2. once the system starts to complain from the Device Manager where it says "Base system device" with a question mark. Then disable this device but do not uninstall the driver.

  3 reboot and it will be fixed.

• OR-Motion PXI Card Device Status = does not

  I can't connect with my motion NI PXI-7358 Controller card.  The general tab in MAX for the map shows that "Device status" = "does not" see the attachment.  I've not mapped and matched the remote device.  I also removed and re-installed PXI card without success.

  Hi Jeffmg,

  This seems to be a known issue. There is an internal knowledge base documenting this problem and a potential solution.

  The solution according to the KB article:

  "This problem can occur when a previous jury has been mapped to the host machine. The NIMtnSvr.exe is based on the ID Board and sometimes gets stuck. To resolve this problem, close any software OR run, and then open the Task Manager and end the process of NIMtnSvr.exe. This will disable the server and allow it to start again, the next time that it runs. When you open MAX, the boards will be displayed on the local host that is mapped correctly. »

  N

• Device Manager does not display devices

  Control Panel takes me to the MMC, but Device Manager does not display devices

  Hi Bandjo,

  ·         Device Manager is empty?

  ·         You have made any changes recently?

  ·         You have installed Windows XP Service Pack 3?

  Check to see if this article helps you.

  None of the items appear in the device list manager when you open

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Device Manager does not display c or D drive.

  The Windows Device Manager does not display the drives c or d.  With File Explorer, they show and are easily accessible.  What's wrong?

  Hi Alberini,

  You would actually use the Device Manager to determine which devices are installed on your computer, update driver software for your devices, check to see if hardware is working properly and change the hardware settings. You can also use Device Manager to update a driver that does not work properly or restore a driver with its previous version.

  To view the files or the drive hard internal to your computer, would use you Windows Explorer.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• W7 Device Manager does not recognize the Intel AMT devices

  Please help: where can I find - how to install the latest drivers Intel AMT for Windows 7.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that the Device Manager does not recognize the Intel AMT devices

  What is the brand and model of the computer?

  Check out these links and see if they help.

  Computers that use Intel's vPro technology can have devices that are not recognized in Windows 7 Device Manager

  http://support.Microsoft.com/kb/976728

  Clean installation WARNING: Back up your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files.

  If your motherboard supports AMT technology, you can download, install the drivers from this link.

  AMT: Intel® AMT Driver for Intel® motherboards

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?&DwnldID=16936

  Note: This download is valid for the products listed below.

  Intel® card mother DB43LD

  Intel® card mother DQ43AP

  Intel® card mother DQ45CB

  Intel® card mother DQ45EK

  If the problem persists, I suggest you to contact Intel support. http://communities.Intel.com/Community/Tech

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• X 1 carbon Gen3 touch screen camera does not

  Hello

  As in the description, I have the 3rd generation X carbon 1 with a touch screen. I have problems my camera integrated into the work. I think that I remember when I got to my laptop, but I haven't used in a while. Yestrday, I googled Hangouts to try and use the camera again, but it did not work. I continued to look for his start-up. I tried to download the latest drivers (who would never complete installation because it could not find the device). I deleted my antivirus. I disabled my ad blocker on my Chrome. Rebooted my laptop several times. I did a bunch of stuff, but nothing seemed to work. I went in the program of camera integrated by default on my laptop and it shows just a camera with an X through it, it seems that my laptop is not plugged properly or something. A way to fix it? It is a tiny little problem that I can fix it with, or is it a bigger problem at hand? Or... I'm just delusional? I never had a built-in camera?

  Open settings of Lenovo from there, you can control your camera, WiFi, Bluetooth and much more ensure under camera that the security mode is not enabled, if it is then it will not be sent the images from the camera turn off so he can send photo again since that one thing security when you use not the camera to prevent hackers / intruder to misappropriation of your camera to see what you at home so they can penetrate when nobody is home to steal things.

  If that does not fix it reboot the bios then find section i/o in the bios and make sure integrated device said he [Enabled] and not [Disabled] if there disabled that also areason why it won't work.

• Smartphones blackBerry Desktop Device password does not work

  When I connect my Storm to my PC via a cable ubs, a pop-up box to request my password for the device, but it does not accept my correct password.  I guess that's the same password I use on my device each time that I unlock it. I tried turning power switch digital lock but still does not work.

  I have 'Safe' switch off my camera and then disable the password on the device before plugging it back it.

  What hassle.  Any solution?

  Thank you.

  Do you have a digital password?  What I mean is, you keep the storm in portrait mode when you enter your password on the device and it is a series of numbers?  If so, this translates into the storm than the alpha characters, which you can use on your pc.  For example, if your password is 369, and that's what you enter on the storm when you hold the device using the appeal on its merits, then your password if you notice the characters entered so alpha characters are 369 is actually dmw.

• The cisco touch 10 Soundbar does not work

  Hello

  The devices are registered on CUCM 10.5.

  We use a SX20 with Touch10, it works fine except the Touch10 Soundbar, it cannot work.

  What could be the problem?

  Thank you for your support

  Homayoun

  What do you mean by soundbar? Is the volume control button Unit 10 touch?

  Have you tried factory reset of the device touch 10?

  Check out the video link below and you will guide you how to the factory to reset the device:

  https://www.YouTube.com/watch?v=bTGuxht_7Ww

  If factory reset does not resolve the issue, contact Cisco TAC if your contract of service for this device. They would replace the hardware problem if discovered unit.

  Kind regards

  Acevirgil

• ASUS touch EP - 121 does not work after Windows 8 Pro 64-bit install

  At ran Windows 8 Developer Preview and Preview of Windows 8 consumers on this ASUS Ep 121, Touch worked with pen and fingers, after that Windows 8 Pro 64 Bit OEM installation on 10/27 tap does not work.

  Reinstalled Windows 8 Pro 64 Bit OEM and touch works during the installation process, but not after initial start-up. Don't see the unknown devices in Device Manager.

  Update to the latest version of the ASUS BIOS dated 23/10/2012. Must be the driver problem or work around.

  At ran Windows 8 Developer Preview and Preview of Windows 8 consumers on this ASUS Ep 121, Touch worked with pen and fingers, after that Windows 8 Pro 64 Bit OEM installation on 10/27 tap does not work.

  Reinstalled Windows 8 Pro 64 Bit OEM and touch works during the installation process, but not after initial start-up. Don't see the unknown devices in Device Manager.

  Update to the latest version of the ASUS BIOS dated 23/10/2012. Must be the driver problem or work around.

  Hello

  Read the following article.

  Touchscreen does not work after the quick start on a computer that is running Windows 8 or Windows RT: http://support.microsoft.com/kb/2769287

  Read the article and then click on the button download software patch is available at the top of the article.

  Accept the license agreement.

  Follow the instructions to receive the fix.

  Concerning