Develop the preset for the black and white Points

Similar Questions

• I can't seem to change the black and white on my Lexmark printer.

  At the same time, I changed my printer set default print black and white.  Then I would just change color when I need it to be.  Then I noticed that the check box for printing black and white has been checked and gray, so I couldn't change it.  I thought it was because I was really low on my color.  I now have a new color in this cartridge, but still it won't let me uncheck the box in black and white.  I tried to restart my computer but no change.  Help, please.

  I have a Lexmark 7600 series.

  Check the settings of the printer itself to verify that it is not changed and there only in black and white (if there are all these settings on the printer)-which would probably override the settings on your computer.  BTW, what is the exact printer?  This is it: http://support.lexmark.com/index?page=answers&startover=y&question=lexmark+7600+series&locale=en&productCode=LEXMARK_X7675&segment=SUPPORT&userlocale=EN_US#1?  If not, what is it?

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldget them to at least the printer (http://support.lexmark.com/index?page=content&productCode=LEXMARK_X7675&actp=PRODUCT&id=DR11032&segment=SUPPORT&userlocale=EN_US&locale=en (if I was just on the printer above and you are using 32-bit Vista) and all you have time to do - they can help way beyond simply solve this problem)) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. You can also try the Driver Verifier Manager to see if you can identify the driver or the responsible device (assuming that it is the cause):http://support.microsoft.com/kb/244617.

  Also, check the color cartridge belt moves freely and not get stuck on one side or the other - if the belt does not move, the printer can turn off the option.

  Remove the printer from the computer (I do not mean the drivers or software - I mean the configuration in the control panel).  Create a new printer in the start menu / control panel / printers section. Click on add a printer and start from scratch.  Then see if the new connection/configuration of printer works better than the old.

  If this does not work, then contact Support technique Lexmarkhttp://www1.lexmark.com/content/en_us/about_us/contact_us.shtml and see if they can help you because I don't think it would be a problem of Vista if you have reinstalled everything.  It may be a problem with the installation but it can also be a hardware problem - so be it, they should be able to help.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is there a convenient way to selectively apply the black and White Conversion?

  First of all, I know how to use the black and white adjustment layer and I am familiar with masking. What I want to do, it's something more complicated.

  When I convert a picture n & B, I often find that there are areas of the image that would benefit from a slightly different treatment than the rest. For example, I have a lot of foliage that I want to run by using the yellow and green Sliders, but maybe there's Green House which I want to clear up instead. Using a black and white layer adjustment I can't make this kind of decision as it effects the entire image. And other layers B & W setting on one has no effect because it has already been converted.

  My first thought was to use two different adjustment layers, one with a mask reversed on the other, but not only is it very clumsy (what happens when you need more of two sets of adjustments, but it always seems to be an area left along the border of the selected areas / unselected masks where some remnants of color.)

  Use B & W adjustment layer and mask areas that you want to assign. Set the blending mode to luminosity. then you can put a final above all convert to the true B & W.

  

• CC opacity keyframe on the black and white adjustment layer does not work

  Hello

  I use the first cc under w8.1 pro

  Well, I noticed a strange behavior

  I added a layer of regulation, the black and white effect and several keyframes

  seems that first reads only the first

  for example

  (1) key-> @0 % frame the second keyframe @100 %, the video is all in color, no matter how much of I add keyframes

  (2) the first key @100 second @0 % (opacity) the video is in black and white, again no matter how many I add keyframes, only the first is read

  I tried the black and white effect on video titles, and so on and it works perfectly, it does not work on the layer of regulation

  I tried other effects on the layer of regulation and they work

  is a bug?

  There is a known bug in previous versions?

  Thank you

  I can reproduce the problem on my system, 8.1 or Mac OS 10.10.3 body.

  MtD

• Windows XP 07 login I get the black and white screen where is safe mode option and then just loop it back to the same screen.

  When I powered on my Windows O.S. ' 07 I got the black and white screen where the option of safe mode and when I entered beginning that normally he just came back to the same screen of the suggestions?

  Hi RudyNY,

  1. you have Windows 7 or Windows XP installed on the computer?

  2. you receive an error during the process of loop?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Check to see if you can boot into safe mode in the Advanced menu options and the last good known Configuration.

  http://www.Microsoft.com/windowsxp/using/Setup/support/nostart.mspx

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How do I rename them.

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default...

  Maybe this old conversation will help you:
   http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html

• Hello. Anyone set black and white points when editing? If so, at what point in the workflow do you do that?

  Hello. Anyone set black and white points when editing? If so, at what point in the workflow do you do that?

  I tend to use after correcting the highlights, shadows, brightness, clarity and contrast may be. In the latest versions of LR you can simply double-click on the word white and black all in now the SHIFT key. Which will automatically define the ends of the histogram. It works fine most of the time, but sometimes I need to go back a little off.

  See this tutorial:

  https://www.YouTube.com/watch?v=_lRkB7oGl80

• Is it possible to get a transparent background for text and to vary the color of the text of the black and white?

  By the question, you can obviously tell that I am a newbie in InDesign. I have a cover of the album I'm working on, and the printer says that exit Photoshop will be rasterized and InDesign is better for clarity. However, in Photoshop, it's easy to overlay text on a chart where the text background is transparent, so the graph through, and it is also easy to change the color of the text if you wish.

  Change the opacity of the slghtly even filling in a text box in InDesign appears to degrade the quality of the text in a substantial way. I do something wrong, and is it possible to get a transparent background around that? And also, text must be only shades of black and white and no other colors?

  I would appreciate anyone who can take the time to respond to what is probably something obvious to most of you.

  Michael

  I realized that I forgot to include the screen Cap illustration. I'm sorry.

  

  I seem to be brain dead on terminology, too. The density of Tint slider is clearly labeled hue, no opacity, nuances and not creat a transparent color.

• The black and white files are Purple in LightRoom CC (they work well in PS and other programs)

  All my black and white files (TIFF and jpg which are grayscale) have a purple slant and are darker in LightRoom CC (except for module development). They work fine on other programs such as PhotoShop, Picasa or other navigation applications. Lightroom Mobile works perfectly as well. I can't find a solution to my problem anywhere. Could you please help me?

  You have a defective monitor profile.

  Try to set the monitor to sRGB profile. If this solves the problem, you should ideally calibrate your monitor with a standard material.

  http://www.lightroomqueen.com/articles-page/how-do-i-change-my-monitor-profile-to-check-WH ether-STI-corrupted.

• Always the color in the photos after the black and white conversion

  Hello

  I have a very strange problem. After the conversion to black and white photos in Lightroom (no matter if I chose B & W in the basic menu, set the saturation to 0, the HSL value 0 saturation sliders or choose a B & W preset) my photos have still a few colors in them. Before and after have exported them.

  The pictures are taken in RAW with a 550 d or a RX100. Same results for all. I use Lightroom 4.3.

  I searched a lot on google and also here in the forum and have not found anything.

  Any ideas?

  Kind regards

  Julian

  

  If you have Lr and PS side by side they appear identical. If they are not something certainly will not, and I agree with ssprengel that it's most likely a monitor profile bad that one of them is choking on.

  If you don't calibrate and profile the monitor yourself (what is the right way to do it), the safest bet is always to use sRGB (or if you have a wide range of monitor the Adobe RGB, but you do not have). > This thread contains a description of how you do it.

  ---

  Some information:

  Monitor profiles contain two parts. One, quite simply, white fixed point, correct the response curve and remove color casts. It is loaded into the video card (or the screen itself) and affects all across the system. This is the part of the calibration.

  The second part is the profile itself, which is more complex. It is, in short, a complete description of the features of monitor in three-dimensional space color. Among other things, it defines exactly the position of the three primaries. It takes the calibration in the image, so in other words it is a description of the screen in its calibrated State. But only color management applications to read the monitor profile and debug to display accordingly. Other applications just ignore it and send the numbers directly through.

  This second part, the profile itself, is what often causes problems because many profiles are not properly written. Manufacturers of monitor (and portable) are known for this. You would think if he succeeds, but it's not fair.

  To compound things, these bad profiles are often pushed through Windows Update, so that people don't even know they are being installed.

• My HP Photosmart C8180 All-in-One Printer does not scan the black and white film strips or slides.

  This problem occurred recently. Previously, the scanner accepted slides and strips of black and white film and scanned them without any problem. Since I've updated the OS on my iMac (I am currently using OS X 10.6.8), I contacted Applecare because I thought that it was possible that my current operating system might have some incompatibilities with the C8180. 'Expert' AppleCare then accompanied me by a uninstall/reinstall, but it has not solved the problem. AppleCare said then that the problem is no doubt HP hardware failure. I find it quite peculiar since the scanner otherwise Applecare analysis works and there is no problem with respect it print or copy.

  Hi, JAOC,.

  Your C8180 can scan slides or films fixed on the memory card.  This will allow you to test the scanning equipment.

• Creating sectional color thanks to the black and white effect

  Hi all!

  Given the beautiful Muse model that uses Parallax scrolling, then at some point, there is what appears to be black and white images with sections of transparency showing the image color below. Someone know how to achieve this effect or maybe a tutorial that could point me in the right direction?

  Here is link to the model in question:

  Fashion Show Preview - ThemeForest

  Jody

  Hi Jody,.

  What kind of effects is applied through some specific widgets which are also made by-

  https://themeforest.net/item/fashion-show/5411127.

  Therefore, you should contact directly or either purchase their theme, as they are already patented.

  Or you can search all of this widget on Adobe Muse Widget Directory

  Kind regards

  Ankush

• ATI Mobility Radeon X 1400 with the problem of the TV, only the black and white photo

  Hello

  When I try to connect my TV to my Dell Inspiron 6400 with ATI Mobility Radeon X 1400 card, all I get is a black and white image. I have tride all the PAL settings.

  What I tried: I connected the s-video with an s-video cable output to my TV s-video connector (composite) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (RGB signal) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (composite signal) result: no color image, just black and white of my office.

  His is no problem, this workt fine.

  Anyone know how can I get the color on my TV? Is this possible with my s-video cables? What type of signal you send with my Mobility Radeon X 1400 graphics card?

  Kind regards

  Marcel

  
  

• Tecra M3 - black and white points

  IM problem with my Tecra M3,

  I have the Toshiba logo came fine.
  Then a bunch of black and white, (its windows when crashed and gives you option in safe mode) but you can't get out of the text, I only know because Ive delt with computers crashed before.

  Start windows XP SP 2 basically there is a white bar at points vertically and scroll down.
  Then finally goes blue screen of death and reboots.

  I changed the HARD drive with my old operating system if it is not a virus, I've agreed with the ram, which is 2 x 1 GB sticks.
  Ive tested individually and together, and yet I still get the same problem I mentioned above when I start my computer.

  If this isn't a virus or HARD drive, it is not the ram, what is the problem here? The screen looks fine with the toshiba logo (no points from top to bottom)

  What do I need to fix? What is broken?

  Someone who can help much apprciated.

  see you soon

  Why put 2 times in different threads on the same issue?
  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=182726

• Mini PCI WIFI card, what are the black and white wires for

  Hi after a lot of research, I find that my 303 1900 is the later model which can be turned into Wi-Fi, it has the LED on the front panel and the switch on the right side. I contacted Toshiba who gave me the part number which is PA 3212U - 3MPC and telephone number of the supplier, 0870 2202 202 costs about £55.00. After the Panel on the lower part of the machine (which houses the memory), I see the place where insert the PCI, which is holding me back of buying the card would be there are 2 wires 1 Black 1 white stuck with tape in the compartment where the card slips, I understand they are antenna but where are they going? they have to be fed outside of the case or they will work inside. ?

  I used a Belkin PC card for awhile but have a little tired to remove whenever I have the laptop computer in its carrying case. (OK buy a bigger box), Russell.

  Hi Russell

  The driver is usually on the CD you will get with the wireless network card. Don t worry about the installation of the driver. It is very easy.

  BR