Develop the screen problem
On my screen to develop my picture looks like neon, I used a sort of filter/plugin. I must have hit a wrong button and I don't know how to cancel it so that my photo will look like what it really is. I tried uninstalling and reinstalling but the problem is still there. Everything else seems to work. It's just the view to develop is turned off and I do not know how to reset. I have even a screen shot in work, but it doesn't seem like I can share it here. How can I reset this? I have a screen shot, but it seems that I can't post it here. On my screen to develop my picture looks like neon, I used a sort of filter/plugin. I must have hit a wrong button and I don't know how to cancel it so that my photo will look like what it really is. I tried uninstalling and reinstalling but the problem is still there. Everything else seems to work. It's just the view to develop is turned off and I do not know how to reset. I have even a screen shot in work, but it doesn't seem like I can share it here. I am a beginner. Help, please?
Post edited by: Rachel Bellenoit
Go to the Lightroom preferences, performance tab, disable the GPU option. This is the usual solution for what you see.
Tags: Photoshop Lightroom
Similar Questions
-
Vertical lines on the screen problem - now 5 of them!
HP Compaq nw9440 EY615ET #ABU, running XP Pro 32 bit SP3. 512 MB Quadro FX 1500 M (HP) graphic - running at any resolution, although 1920 x 1200 32-bit per pixel 60 Hz value as it has been since put in place in 2007
Details:
Not a BONE before issuing even under Linux.
Indicates when the laptop originally starting an ebb tide - 3 weeks ago, I had a vertical blue line, I guess that one pixel wide, then others began to appear short starting and then stretch as if each I think be 1 pixel wide.(Information provided by Piriforms - 'Speccy' - thank you).
Graphics
Monitor
Name default Monitor on NVIDIA Quadro FX 1500 M
Course resolution 1920 x 1200 pixels
Work the resolution 1884 x 1200 pixels
Active state, primary, output devices support
1920 screen width
Monitor height 1200
Monitor the BPP 32 bits per pixel
Monitoring frequency 60 Hz
Device \\.\DISPLAY1\Monitor0
Quadro FX 1500M
G71M GPU
Deviceid 10DE-029
Revision A2
Subprovider HP (103C)
Output current level 1
91 nm technology
278 M transistors
Support for DirectX 9.0 c
DirectX Shader Model 3.0
OpenGL 2.0 support
PCI Express x 16 bus interface
Temperature of 52 ° C
200 MHz GPU clock
Memory clock 300 MHz
Nv4_disp.dll Driver
6.14.11.5631 driver version
ForceWare version 156.31
The BIOS version 5.71.22.43.a8
ROPs 8
24/24 Pixel Vertex shaders
Memory Type GDDR3
512 MB memory
256 Bit bus width
Pixel Fillrate 1.6 GPixels/sec
Texture Fillrate 2.4 GTexels/s
19.2 GB/s bandwidth
Number of performance levels: 1
Level 1
OpenGL
Version 2.1.1
Vendor NVIDIA Corporation
Quadro FX 1500 M/PCI/SSE2 rendering engine
GLU Version 1.2.2.0 Microsoft Corporation
Values
GL_MAX_LIGHTS 8
GL_MAX_TEXTURE_SIZE 4096
GL_MAX_TEXTURE_STACK_DEPTH 10
GL extensions
GL_ARB_color_buffer_float
GL_ARB_depth_texture
GL_ARB_draw_buffers
GL_ARB_fragment_program
GL_ARB_fragment_program_shadow
GL_ARB_fragment_shader
GL_ARB_half_float_pixel
GL_ARB_imaging
GL_ARB_multisample
GL_ARB_multitexture
GL_ARB_occlusion_query
GL_ARB_pixel_buffer_object
GL_ARB_point_parameters
GL_ARB_point_sprite
GL_ARB_shadow
GL_ARB_shader_objects
GL_ARB_shading_language_100
GL_ARB_texture_border_clamp
GL_ARB_texture_compression
GL_ARB_texture_cube_map
GL_ARB_texture_env_add
GL_ARB_texture_env_combine
GL_ARB_texture_env_dot3
GL_ARB_texture_float
GL_ARB_texture_mirrored_repeat
GL_ARB_texture_non_power_of_two
GL_ARB_texture_rectangle
GL_ARB_transpose_matrix
GL_ARB_vertex_buffer_object
GL_ARB_vertex_program
GL_ARB_vertex_shader
GL_ARB_window_pos
GL_ATI_draw_buffers
GL_ATI_texture_float
GL_ATI_texture_mirror_once
GL_S3_s3tc
GL_EXT_texture_env_add
GL_EXT_abgr
GL_EXT_bgra
GL_EXT_blend_color
GL_EXT_blend_equation_separate
GL_EXT_blend_func_separate
GL_EXT_blend_minmax
GL_EXT_blend_subtract
GL_EXT_compiled_vertex_array
GL_EXT_Cg_shader
GL_EXT_depth_bounds_test
GL_EXT_draw_range_elements
GL_EXT_fog_coord
GL_EXT_framebuffer_blit
GL_EXT_framebuffer_multisample
GL_EXT_framebuffer_object
GL_EXT_gpu_program_parameters
GL_EXT_multi_draw_arrays
GL_EXT_packed_depth_stencil
GL_EXT_packed_pixels
GL_EXT_pixel_buffer_object
GL_EXT_point_parameters
GL_EXT_rescale_normal
GL_EXT_secondary_color
GL_EXT_separate_specular_color
GL_EXT_shadow_funcs
GL_EXT_stencil_two_side
GL_EXT_stencil_wrap
GL_EXT_texture3D
GL_EXT_texture_compression_s3tc
GL_EXT_texture_cube_map
GL_EXT_texture_edge_clamp
GL_EXT_texture_env_combine
GL_EXT_texture_env_dot3
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_lod
GL_EXT_texture_lod_bias
GL_EXT_texture_mirror_clamp
GL_EXT_texture_object
GL_EXT_texture_sRGB
GL_EXT_timer_query
GL_EXT_vertex_array
GL_IBM_rasterpos_clip
GL_IBM_texture_mirrored_repeat
GL_KTX_buffer_region
GL_NV_blend_square
GL_NV_copy_depth_to_color
GL_NV_depth_clamp
GL_NV_fence
GL_NV_float_buffer
GL_NV_fog_distance
GL_NV_fragment_program
GL_NV_fragment_program_option
GL_NV_fragment_program2
GL_NV_framebuffer_multisample_coverage
GL_NV_half_float
GL_NV_light_max_exponent
GL_NV_multisample_filter_hint
GL_NV_occlusion_query
GL_NV_packed_depth_stencil
GL_NV_pixel_data_range
GL_NV_point_sprite
GL_NV_primitive_restart
GL_NV_register_combiners
GL_NV_register_combiners2
GL_NV_texgen_reflection
GL_NV_texture_compression_vtc
GL_NV_texture_env_combine4
GL_NV_texture_expand_normal
GL_NV_texture_rectangle
GL_NV_texture_shader
GL_NV_texture_shader2
GL_NV_texture_shader3
GL_NV_vertex_array_range
GL_NV_vertex_array_range2
GL_NV_vertex_program
GL_NV_vertex_program1_1
GL_NV_vertex_program2
GL_NV_vertex_program2_option
GL_NV_vertex_program3
GL_NVX_conditional_render
GL_SGIS_generate_mipmap
GL_SGIS_texture_lod
GL_SGIX_depth_texture
GL_SGIX_shadow
GL_SUN_slice_accum
GL_WIN_swap_hint
WGL_EXT_swap_control
GL_Autodesk_valid_back_buffer_hint
GL_EXT_bgraIf this information is of no use in diagnosis?
I think it's a hardware problem but someone smarter and more competent than me may be able to give me the right diagnosis and a work around or fix.
Thanks in advance.
Grandan.
My apologies: fault a comma (and everyone leaves out commas these days), I missed your comment about what is the same issue for Linux. Just read too fast; no excuse.
You are away until a stream of fast moving without means of transport.
Otherwise, it sounds really not like it's material.
Double check:
- Cold start, immediately start tapping on F10 to enter the BIOS - if the problem is present in the BIOS, then the problem is in the hardware level.
- If you have the means to connect a VGA monitor, and the image is good on the external monitor, then the screen or cable is bad.
- If the image on the external monitor is the same as on your laptop, then the video card itself is bad OR not has no welding holding to the motherboard.
===================================================================================
Options:
- You have the option to repair the laptop yourself, and that includes to find out exactly what is wrong with it AND not break anything else in the process.
- You can send it to repair,
- Or you can thank for quality service and replace it.
Good luck! Think about what you want to do, then decide.
-
The horizontal lines of the screen problems
Hello
Since I use Windows 7 X 64 on my T500 2241, I have problems with many small horizontal lines on the screen. The same one I have on an external monitor. With Win XP 32 bit, I never had such problems on this computer.
May that this problem is related to the video driver. I use: Intel Mobile 4 Series express chipset driver version 8.15.10.2302. I had the latest bios update for my computer.
Nothing helps. Y at - there a better idea?
Thank you very much
Michael
Hi, I found following:
It works
Thank you
Best regards
Michael
-
I use LR since May 13. Initially, I used LR4, then upgraded to 5 on my iMac. A few days ago, when you use the development Module, the right side of the screen is missing. On the right are the tools and panels for setting global and local photo. Went. I tried to the control key to develop at the top of the screen. Nothing changes. Can anyone help?
Press the TAB key?
Frans
-
Resize the application window to customize the function of the screen - problem?
I know this may seem a little geek,
but I wanted to know why the function of the shortcut is irregular:
Resize the application window or floating window to fit screen. (Press again to resize the window so that the contents of the screen.)
CTRL +-(backslash)
Command +-(backslash)
1 window Resized to fit screen - activated via the shortcut Ctrl +-
2. the window is not Resized fit screen - function is disabled have it minimized the window
(The title bar is hidden,
but the right is a vertical space,
where the software does not match the screen completely.)
I want to know why this happens,
at least on Windows is... (Yes, I use Windows 10)
It would be on purpose?
Some features to help with something,
When the user returns to minimize the window?
I wanted to keep window screen will perfectly still.
even when minimized and return to the software;
I need more space on the screen,
in the vertical direction especially (because I have a screen ultra widescreen 2560 x 1080).
To see a preview of the video is better,
because 50 percent of the preview screen,
However, if the proposed title bar (i.e. without use shortened).
lose a small percentage.
I want the amount of space as possible.
I'm tired of getting retracing the shortcut each time I pass a task.
Submit a bug report and use the version of application window for now. Maybe someone here could offer a workaround solution, but I think we have said pretty much everything what it means
-
WinXP split the screen problem
Brand: Compaq Presario
Model: V6444US
OS: XP sp3Problem:
When the computer is turned on this morning the entire screen (from the beginning of initialization) was split into tiled copies of iteslf. Even when I go into the BIOS screen, it is too divided in copies in mosaic. When Windows starts, the entire desktop is tiled. Each tile has its own cursor, taskbar, desktop icons and programs. All the tiles to work at the same time (not individually), so when the mouse moves, all cursors are moving the same direction and click on the same icon in each tile. When a program is open, it opens all the tiles. No new programs have been installed and no updates since the last use (the day before).
Attempted fixes:
1. simple restart - no change
2 system restore - no change
3. updated - graphic driver is not necessary
4 anti-virus - cleanSomeone at - it clues on how I can remove the split and make normal again (apart from complete reinstallation)? Any help is appreciated thank you.
Hello Khahli,
Thank you for your message. We will try to update the driver manually. Please follow the steps below:Click 'Start' > right click on 'My computer' > select 'manage '.Click on Device Manager.Click the (+) sign next to "display adapters".Below, you should see the info of your video card, right click on the video card and select "Properties".Select the "Driver" tab > click on "Uninstall".This will remove your driver. Restart and reinstall your driver that you have disk or downloaded from the Web of HP/Compaq website.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Thanks for the reply.
In my screen is getting refreshed every 30 seconds, if I use for single Labelfield setext it works fine, but if there are many Labelfield (that are created dynamically via a loop), it seems that the process does not work. Could you please let us know, what could have caused this.
Here is my code...
sample)
VerticalFieldManager ListCol = new VerticalFieldManager()
VerticalFieldManager TimeStatus = new VerticalFieldManager()
lbl_timestart = new RaidersIconLabelBoxHa;)
TimeStatus.add (lbl_timestart)
Add (TimeStatus)
bgthread. Start()
class BackGroundThread extends Threa
Channel HostContent
Boolean conditionpublic void run)
If (status
RefreshScreen()
}
Try
Invalidate()
} catch (System.Exception epublic void RefreshScreen)
UiApplication.getUiApplication () .invokeLater (new Runnable()
public void run)
TR
{
lbl_timestart. SetText (modules. Hostedtimestart.ElementAt (0))
Invalidate()
catch (System.Exception e
Logger.logEventInfo (try ())
})Above code works very well
The code of my problem is...
sample)
VerticalFieldManager ListCol = new VerticalFieldManager()
VerticalFieldManager TimeStatus = new VerticalFieldManager()
for (int i = 05; i ++)
lbl_timestart = new RaidersIconLabelBoxHa;)
TimeStatus.add (lbl_timestart)
Add (TimeStatus)
bgthread. Start()
class BackGroundThread extends Threa
Channel HostContent
Boolean conditionpublic void run)
If (status
RefreshScreen()
}
Try
Invalidate()
} catch (System.Exception epublic void RefreshScreen)
UiApplication.getUiApplication () .invokeLater (new Runnable()
public void run)
TR
for (int i = 0; 5; i ++)
lbl_timestart. SetText (modules. Hostedtimestart.ElementAt (i))
Invalidate()
catch (System.Exception e
Logger.logEventInfo (try ())
})If it works...!
================================================
feel free to click like button that is to the right of this message.
-
I'm having a huge problem with FCPX. A computer captured as ProResLT and looks great desk gets all warped when they are imported into FCPX. No travel or transcoding took place. Reference is made to the original file (which seems well). I've included a short video link so you can see what I saw. Any help would be appreciated. Certainly I'm not the only one to go through this:
https://drive.Google.com/open?ID=0B3dMmexvIcCFRDB5LTdCMXJ5OHM
Can you show the specifications for media in the info Inspector in FCP extended value?
-
Hello
Excuse me for my bad English, I «m french...» Sorry...
I need to change my laptop screen and I don't know how to do...?
Is there a manual for this product?
Thanks for your answers...
http://h10032.www1.HP.com/CTG/manual/c01550108.PDF
Make sure you're statically unloaded prior to entering your laptop and the battery and adapter are disconnected.
-
Develop the module problem after upgrade to LR6
I upgraded from LR4.4 to 6, but had made a stop at 5.7 on the way. I have improved the catalog to v5. Now in LR6, that I bought at the end of the day, photos in the develop module are corrupt. I can see them but are mainly grey with a few colourful highlights. Don't know if it's a question of catalog or how to fix. All files seem to be affected!
Hi cruizemissile,
Please turn off the graphics processor in the Lightroom preferences.
Open Lightroom
Go to Lightroom preferences in the Edit menu
Click the performance tab
Deselect the graphics processor
Restart Lightroom
Let us know if that helps.
Kind regards
Mohit
-
Cloning and healing of the screen problems
I'm using CS5 and today, whenever I try to use the stamp of duplication or Healing Brush tool, after I "alt-click on" my point of reference, when I move the cursor, the entire screen moves. I tried to update my video driver thinking maybe that was it, but Windows says that the driver is up-to-date. Need help!
Thank you
Scott A. Breaux
Have you tried to reset the tool and or the Photoshop preferences file?
-
Computer screen problem after you download the update from Microsoft Windows
My computer screen appear stained in colors like "shattered windshield appearance" after download Microsoft window update for the hardware called, ATI Technologies, Inc. - Video - ATI MOBILITY RADEON 7000 IGP. I downloaded this after my computer recovered from a serious error (according to the message) that push me to send an error report. He advised me to download the update custom as indicated above.
Later, I noticed the screen problem. Can someone help me please on this issue?
Can you please reduce the OS to an earlier time using System Restore tool and check if this problem has disappeared?
-
Blue screen to develop the module Lightroom 6.3
I use Windows 10. I Lightrooms 6.3 installed and when I go into the mode of developing the screen turns blue with no image list.. How can I fix this?
Hi Veronica,
You must go to the Edit menu > Preferences in Lightroom > Performance > uncheck 'use graphics processor' and restart Lightroom, and check again.
-
I bought a HP w2448 hc monitor in May. Since then, I had seven replacements in total some new, some refurbished, whenever I get from that that he developed the same problem within days or a few weeks. I get a little gery of interrogation under the screen in different places (not to be confused with dead pixels because I know what they look like) brand is generally the size of a full stop with pen and paper and sometimes is slightly elongated like a comma. The last monitor, I had a day ago and is a new brand, as soon as I plugged it in (with a new HDMI lead) I noticed one of these brands. Even if Hp seems happy to keep their replacement becomes a little uncomfortable staying in deliveries, especially when they arise and to talk to these people in the aid centre in SA is rotted my brain slowly. Can someone if it please help or should I just ask for a refund of my hard earned £350. The reason why I love this monitor's resolution, the brilliant display effect and the massive hinge which allows you to extract the monitor up and down at different heights accourding to your seating preferences.
Thx a lot in anticipation
I updated the graphic card drivers whuich had no effect, what part of my pc could be causeing this problem if it is the pc and not only a series of bad luck.
-
A dark line at the bottom of the screen - influence THE Qosmio X 500?
Hello
I have a X 500/00 X, and at the height of the windows task bar, there is a long and dark blur/shadow which extends along the screen. Now, it is not immediately noticeable (like the taskbar cache) until you hide the taskbar (or do more so the question is not at the same height as the taskbar itself). If you change the wallpaper of a solid such as blue color it is VERY apparent. It is also obvious when windows loads until the taskbar appears to hide.
It does not appear that dead pixels, I'm at a loss as to what it is. Unfortunately, it is very obvious when editing photos (I Autohide the taskbar) that there is a long and dark shadow/blur on the entire length of the screen.
Toshiba in a first time was told it would need to be repaired or replaced (this has bugged me because I informed them of the fault 2 days after purchase) but now after reviewing their own test machine (thanks to me telling them to check) they tell me it is considered a "limitation of technology' and I just put up with it. They would even say that it effects ALL of X 500, and even a replacement screen would give the same question. Now, I know the check against the models a dozen display here in Brisbane (a store open 4 boxes looking for a unit not fualty) there is obviously widespread, but surely a fault like this cannot perform all units.
Do any other X 500 owners do NOT have this problem?
Had a nice long chat with someone here re Toshiba service center the screen problem and unfortuantely... Yes, it will be the effect of all THE x 500 and no it can't be fixed.
He said a retailer had 4 of them, so he took one and pulled to pieces trying to solve this problem, even a deported to Tokyo for Toshiba to watch.
Seems the screen is "fluro tubes" to the top and the bottom of the screen and this issue is just a shadow of the tubes and there is nothing he/they can do to get rid of him. Said he tried...
Very bad design Toshiba, whereas it is a product of superior quality, very poor indeed
Maybe you are looking for
-
AEB (Auto Exposure Bracketing) is supported in the SLT A-58?
Hello I want to know if the newly launched model SLT A58 supports the functionality of AEB to shoot HDR or not? If so, use this feature? Thank you.
-
You will need to upgrade my new hardware after motherboard failure - product message already in use. I have upgraded xp to vista home top about two years ago. My motherboard is dead. I used my upgrade disk to upgrade my hardware replacement. He te
-
Matter of style BasicEditField
Hi all IM using BasicEditField that I need to enter the characters in all CAPITALS, so I used the "BasicEditField.FILTER_UPPERCASE" style, when I did I was able to enter the uppercase characters, but I'm not able to enter the SPACE. I travel in Virt
-
BlackBerry break option Z10 video
Hi This is Kishore,I use bb z10, when I am with registration in my bb mobile z10 video I don't see any pause button. is there a pause option are not?
-
The Daisy Chain Camera software update
Hai all, We connected via Garland of precision 1080 p HD camera. We want to make the software upgrade for the same thing on the network. I found the document for the same thing, mentioning the camera software ftp transfer. But where I can load the fi