Development of control before entering the case

In adjoining VI I want to boot the SP value to zero for a few seconds when the transition of 1,2,3 and 4 cases 0 (manual set point), in fact, is not not necessary to initialize when it goes from 1 to 0 cases (the value is set to zero cases 1), but if this bit of redundancy makes it easier case I'm ok with that.

In the future, MS will be output sent to the hardware and RO will be a voltage read from hardware.

Techniques suggested appreciated.


Well, common sense would be to implement a correct state machine that is aware of all transitions.

In a simple case like this, you could just do something like the amendment attached.

(Note that I took the liberty to simplify a number of things: why do you need so many constant diagram with the same value?) Don't be afraid to branch the wire and use only one of each. Even easier would be to combine any non-null in one. property nodes are relatively expensive, so only use if entry has really changed and not more and more. Instead of the value property, use local variables. Much more effective! So you write to RO with each iteration, which belongs according to the structure of the case. No need to value properties or local variables at all, right?

I think that the pile of case structure could be further simplified, but this should help you get started. Good luck!)

Tags: NI Software

Similar Questions

  • Control/indicator in the case of error?

    Hi all

    I forgot something that starts to bother me.  If I create a Subvi with a case of error structure.  If I put all my indicators/controls inside or outside the structure and why?   Thank you!

    Until I read the case, I suppose that the tips of the "clear as mud" Post are still valid.  Try to put all the orders/lights on the diagram of the root.

  • Remove the mask before entering the data in the database?


    Hey guys, I'm with the following problem, I am using plugin 'text with hidden Input field', works perfectly in a deal to add the mask, but I have a problem saving the data in the database, I need to record data only, without the mask at all, no idea how to do this, a dynamic of action? What would be the best way to go, and if they have advice on how to make would be welcome.

    Thank you!


    I would like to share with you that I found the solution to remove the mask before you update the database, I share case someone needs and evaluation of teachers is the best solution, I did the following creates a "process after Submit" before performing the "LMD" process, removing the masks as replace, just below my code is pretty simple as I said, my point in this case decided, as I have said I would like that assessment of you as possible to see if others have better enforcement solutions!

    : P33_NR_CEP: = replace (: P33_NR_CEP,'-', ");

    : P33_NR_TELEFONE: = replace (replace (replace (: P33_NR_TELEFONE, '(', ''), ')', "),'' ', ',");


    Chubby Kiran fac586

  • How can I filter a table of data control without entering the query

    I have a table from a WSDL-based web service data control.

    I want to filter the table without input query in the filter text box. Without text filter box, each could filter the table with a query hardcoded internally.
    For example, when the user menu button click and then it filters the table where type = '1' and B menu button filters the table by type = '2' and C menu button filters the table by type =' "."

    How can I filter the table without entering the query?

    Could someone point me to a solution please.

    Thank you.
    11.1.5 jdev

    Published by: 893364 on October 26, 2011 12:15

    Published by: 893364 on October 26, 2011 12:21


    When you have created the table, have you tried selecting the option "filter". Select the table, and access the property of m.. In the toolbar of the Properties Inspector, there is an icon to change the configuration. His fields of filter adding filter for the user to search in.

    Option 2: Data from the Web Service are actually held in iterators. If you want to filter the Web service request, I wouldn't use the WS domain controller but a proxy of JAX - WS in a POJO to recover data from the WS. Then the data control created from the POJO. You might have a method exposed on the POJO which allows you to filter the data internally that is held


  • I upgraded Windows 10 & Firefox; a weird URL now appears before entering the site, I asked.

    OK as States of questions, I've upgraded to Windows 10 and improved my Firefox as recommended and now when I put a request in the search box of Firefox it takes me to the screen that allows me to choose the site that I really want, so instead of going directly to this site, the latter appears in the URL line : & msid = bmrbdT43_dc & Creative = 9310780400 & PMT = be & PKW = example 20COM % & LP = https :// RP & = exampleoffer & ex_cmp = cc/Homepage + Test +- + Brand +- + accurate/sea/bmrbdT43/example +- + URL & kwdID = bmrbdT43_dc & adgrpID = 9310780400

    I used "example" instead of the name of the site that was really there (the site I was going to) (I know, clever of me, right?), but it's not just with this site. I Kaspursky security and have referred the matter to them as well, but I don't think that they are also responsive (or beautiful) like you guys. Thank you very much in advance, it feels very similar to a tracker URL, since the 'Tracker' word is the first word. But I must say that they are not very secret to this topic, if that's the case! Thank you once again the Sid

    A browser is a computer program used to display web pages. A browser usually has a set of pre-defined behaviors, such as sending your requests to search to a specific site. Usually these 'default' can change if you wish. There is a lot about Firefox that you can customize.

  • In integration (the command-line developer), I can not enter the options for the command of the jsb

    > jsb http://url

    > jsb http://url 4
    gives a 'available Options, too many arguments' ToolTip window

    There is a blue [options] after the http://url, probably an indication I would add my options here.
    But I can't get the syntax right, or it's bugged.

    How can I enter the options presented by 'help jsb' on integration?

    You can see the options, if you type ' - '. You will need to manually enter the options in the current versions of Firefox.

  • need help on my pavilion DV7 enter the case to replace the cooling fan.

    I the new fan and have removed all the screws that I could find, removed HARD disk Memmory and removed all the screws, how the case apart?

    You can pass by the maintenance and Service guide for the computer laptop dv7 and find out how to replace the cooling FAN. Please be aware that void you the warranty by yourself.

  • Screen blinks twice before entering the logon credentials.

    Original title: logon screen

    When I go to log on to my pc, the screen flashes 2 times, then I can enter my password, when Internet Explorer starts, it also does the same thing. How can I stop this?


    1. have you started facing this problem recently? If so, were there any hardware or software changes made on the PC before this problem?

    2. What is the brand and model of the PC?

    It seems that the graphics card is obsolete or damaged.  I suggest you follow these methods and check if it helps.
    Method 1:
    You can consult this article and install all the latest Windows updates and update the display driver yourself.  Follow this link.

    Method 2:
    If this does not help, you can try uninstalling and reinstalling the graphics driver.

    a. press the Windows key + X, choose Device Manager.

    b. develop graphics cards.

    c. right-click on the graphics driver and click on uninstall.
    You can follow the same article to download and install the display driver.

    Let us know if it helps. If the problem persists, we would be happy to help you.

  • BlackBerry Smartphones Curve 8520 last chance to enter the password or by telephone shall be cleaned.

    Before entering my password [number] I must have pressed the 'alt' key or other, and I was asked to enter 'blackberry' to continue. Then in the password bar, he said also that I had fivemore attempts. No luck.

    I gave to my daughter. No luck. Anway there is no more stars [astericks] I see what I'm typing. When I type my password number, letters come instead, and I can't get into my phone.

    Suggestions please only have one more to go.

    To see if I can get my contacts etc out of my sim card can I put the SIM in another phone, connect to the computer and save to file?

    Since the blackberry "BOLD" forum a similar case.

    Told off for five minutes and try again.

    My problem is why the letters when I am pressing the numbers? the 'alt' is stuck? Or what I have to press 'alt' before entering the Nim-sequence. It's already happened not and do not have to press alt to enter. I just regret touching another button like I was, or just before I entered my password numbers.

    Hi alggomas

    Don't know if you have already tried your last attempt, if your unit is asking for the password, you will need to enter the password that you set, if you have a mix of different characters in your password, I think that you are not able to enter properly on the keyboard for BlackBerry. For example, if your password

    • alggomas123
    • And if you enter a > l > g > g > o > m > a > s > alt > 1 > 2 > 3

    the result will be

    • alggomas1er
    • You must enter
    • a > l > g > g > o > m > a > s > alt > 1 > alt > 2 > alt > 3

    to get alggomas123 on your device. For example, while on the BlackBerry keyboard, you think you type alggomas123, you actually type alggomas1er

    alggomas wrote:

    To see if I can get my contacts etc out of my sim card can I put the SIM in another phone, connect to the computer and save to file?

    All contacts are stored on our memory of the unit no SIM card, unless you have previously saved or copied these contacts on your SIM card. Also a reset will not delete the contacts stored on your SIM card.

    alggomas wrote:

    Since the blackberry "BOLD" forum a similar case.

    Told off for five minutes and try again.

    My problem is why the letters when I am pressing the numbers? is the 'alt' stuck? Or what I have to press 'alt' before entering the Nim-sequence. It's already happened not and do not have to press alt to enter. I just regret touching another button like I was, or just before I entered my password numbers.

    If you think that your alt key is locked, and then do a battery pull reboot by removing the battery while your unit is powered. A lock will be released after a restart battery pull.

    You must press the ALT key before entering these numbers. So please, take your time and make sure that you type on your device. If it fails, then if you have a previous backup of your device, or if you use BlackBerry protect then you can restore your data from these backups

    Good luck

  • Manually enter the WPA key in Bravia, TV freezes

    Hey there,

    I'm trying to set up my TV (model KDL-46NX720) with my wireless network. This should be pretty easy... Problem is: I don't have the remote. All directions, I found were using the remote control...

    I tried to maneuver on mine it and enter it manually, using the buttons for volume/channel/enter/House on the side of the TV. In fact, I was quite successful and was able to select the right wireless network. However, I came across a problem as soon as I got to the screen that asks for the WPA key. It came with the scroll slowly flashing in the text box, while the 'k' has been selected below. It showed my old password wireless in the text box and absolutely not allow me to delete or edit - or even move the selection of the 'k '.

    I tried to press the 'enter' all by pushing the channel up and down buttons. I tried to do the same using the 'home' button He would not even make something when I pressed the button "home" only - wouldn't take back me to another screen or the main menu... Nada. The ONLY THING that seemed to allow me to do was to change the volume. Whereas before the volume keys hands left-right scrolling capabilities, they suddenly changed the function to regain control on the volume actually...

    Any ideas on what is happening here? I want to just set up the wireless to connect my iPhone and use it as a remote control (as I did in the past - yes I went through this before, but never experienced frozen screen password!)... and maybe just maybe finally get to see Netflix!

    Really shouldn't be so hard... but alas.

    Thanks for all the ideas and input.

    Hi phlyinphish9,

    You need a remote control to enter the WPA key, but a work around you can try is to have the TV connected via a wired facility first, and then have your iPhone enter the WPA key through the wireless setup. Or if you have a set-top box remote, try to check if it can manage to the TV.

    If my post answered your question, please mark it as "accept as a Solution.

  • I hate the new address bk; don't send as before. I type a few characters and silly stuff enters the addr box, then rejected mail. How to go bk old way?

    If I type in an address like 'Amy's parents' list I can send is no longer a big e-mail to all members of my family in a single click. I'll take a note "no-no" of you Bird saying ' the close recipient of Amy isn't in the right format, to [email protected]» We cannot send this e-mail. ' (or something like that).

    Something like that didn't used to happen before late August 2014 or the beginning of September 2014.

    I even had a one-person e-mail fail this morning (08/09/14) because I tried typing a few letters and he knew to send the e-mail message, but it included these letters in the address. He made the speech out, for example, as 'NJ [email protected]' when I wanted it to be just "[email protected]". This kind of stupid things never before used.

    Can go back us to an earlier version of you Bird, to prevent this? Or a new version will stop it - I think - big bug?

    This has been reported as Bug #1060901. It is fixed in a next version of Thunderbird that is not yet available. Read further for more options back to a working configuration.

    Several other people have sent in the same request of support you, noting that it happened after they upgraded to version 31.1.

    The exact error message is: XXXX is not a valid e-mail address, because it is not the form [email protected] You need to correct before sending the e-mail message.

    This happens in Thunderbird 31.1.0 when the description of your mailing list includes several words separated by spaces.

    Well that isn't ideal, these workaround solutions should allow you to use your mailing lists until a proper fix is implemented:

    • All by composing an email open the address book and select the list you want to send, to highlight all the names in the list and drag them to the To: box. This example uses your existing data without changing it.
    • Replace white "" between the words in the descriptions of these lists with an underscore "_". This requires modification of your descriptions of mailing list (s).
    • Upgrade to an earlier version and disable automatic updates (Windows)

    Go back to a previous version of Thunderbird and avoid the automatic updates

    In Thunderbird Windows updates are automatic by default. In order to avoid similar situations in the future, you could change that and decide to have a more cautious approach to updates.

    Before trying what anyone, make a backup of your Thunderbird profile.

    You can uninstall the current version of Thunderbird via Control Panel > programs and features and reinstall a previous version, download it from here:

    Click the type for your operating system. for example: If you use Windows select "win32", then select the language for example: en-GB British English = then download the .exe file

    You can customize the behavior of automatic updates, however, it is under Tools > Options > advanced > update.

    My suggestion would be to check the updates but let me choose whether to install them.especially if you depend on critical business e-mail / important or personal questions.

  • Before the two latest updates of Firefox, I got myTELUS as my homepage, but it is no longer the case. How can I put back it to my home page? Thank you

    I just want to make 'myTELUS"page of my home, how can I do this? It was okay before the 2 latest updates then somehow knocked out update "MyTELUS" as my homepage, please help...

    Here's how:

    Tools > Options > general (or Firefox > Options > Options > general)

    Here, in the home page section you can enter the address of the page you want to select as your homepage. Also if you are on the page you want to set as the home page, you can select the use current page (so if you don't know the full address, you visit the page and then do as I said). If you want to select a bookmark, you can select use bookmark , and then choose a bookmark as home.

    Click on button "Solved" If this has helped you.

  • How can I set a password for firefox so that everyone must enter the password before running firefox

    My younger sister run my firefox just to this afternoon (she origin use IE), and she saw something that is not visible. How can I set a password for firefox so that everyone must enter the password before running firefox?

    Another option is the master password + extension.

    You must first make sure that Firefox uses a master password, for more details on how to do that see use a master password to protect stored logins and passwords. Then with the master password + extension in its options, go to the getting started section and make sure that "ask for password at startup" and "Exit if cancelled" is selected both.

    As with all extensions, this protection is quite weak and can be bypassed if start you Firefox in safe mode that disables extensions.

  • Is the difference between TSMC and Samsung Chip in the real Iphone 6 s? If this is the case, how can I found it before buying a new? How can I

    Is the difference between TSMC and samsung chip processors in the real Iphone 6 s? If this is the case, how can I found it before buying a new one?

    No, it isn't.

  • Blue contours appeared and I can't control my iphone 5 s. I can't go to settings. I triple click on the button "home" and gives a message to go into settings and enter the password but I can't get to the settings. What does not work? Thank you

    Blue contours appeared and I can't control my iphone 5 s. I can't go to settings. I triple click on the button "home" and gives a message to go into settings and enter the password but I can't get to the settings. What does not work? Thank you

    The blue plan is switch control.


    Triple click to get rid of him.

    "Siri to the rescue.  I said turn off the control switch. »

    Re: How to disable the switch control

    I don't get a request for an access code.  What is a school system?

    switch control

    Settings > general > accessibility > switching control


Maybe you are looking for

  • Satellite A300-1EI - what is the best RAM to 8 GB?

    Hello I want to put 8 GB of RAM in my laptop.I just want to know what is the best type of RAM that will be supported with my pc configrationsHere's my configration of laptop: Information on PC]Model name Satellite A300Part number PSAGCE-00C006ARSeria

  • My iPod 5 does not light

    My 2 year old, iPod touch 5th generation is dead and now, it's not return back. He died a few months ago and I have tried everything to get back on. My home button is broken, and every time I press and hold the power button, logo lights up for about

  • Satellite Pro M70 will not identify SD Bluetooth card

    Help, pleaseI think that my Toshiba card SDIO Type-B for Bluetooth [ver. 1.2 - PA3370 - SD Card3] became defective, until last week I transmit data to and from my laptop with no problems, but now he won't see the map... Please help, these cards come

  • Can not install or download the Validation tool...

    Im trying to down load windows media player then I acidently deleted it... and when I do, says they need to make sure I have a valid version of windows 7. so I click on continue and then comes up saying I need to download the validation tool. When I

  • E700 done ACER speakers aren't working not

    Bought the Acer E700 2 weeks ago. In recent days, the speaker is no longer in effect. I can make phone calls without problem, but video, alarm, ringing, notifications do not work. Check all the options menu; all volumes are at the max, and the softwa